钯/碳纳米纤维复合材料修饰电极同时检测邻苯二酚和对苯二酚

利用电纺丝技术制得钯/碳纳米纤维复合材料(Pd/CNFs),并将其用于修饰玻碳电极Pd/CNF-GCE/CME.Pd/CNF-GCE/CME对邻苯二酚和对苯二酚的氧化还原反应具有较高的电催化活性,显著提高了二者电化学反应的可逆性.考察了支持电解质的酸度对邻苯二酚和对苯二酚电化学响应的影响,选用0.1 mol/L PBS(pH 8.0)作为支持电解质.用微分脉冲伏安(DPV)法对邻苯二酚和对苯二酚进行选择性检测:当混合溶液中存在50 μmol/L对苯二酚时,邻苯二酚的氧化峰电流与其浓度在1～90 μmol/L范围内呈线性关系,检出限为0.3 μmol/L(S/N=3);当存在50 μmol/L邻苯二酚时,对苯二酚的氧化峰电流与其浓度在2～100 μmol/L范围内呈线性关系,检出限为1.0 μmol/L.另外,此修饰电极具有较好的重现性和较强的抗干扰能力.将此修饰电极用于模拟水样中邻苯二酚和对苯二酚的测定,结果令人满意.     

碳纳米管修饰电极同时测定邻苯二酚和对苯二酚

用十二烷基磺酸钠(SDS)分散碳纳米管(CNTs),通过层层组装(LBL)聚二甲基二烯丙基氯化铵(PDDA)和CNTs构筑PDDA/CNTs多层膜电极.利用紫外-可见光谱法对PDDA/CNTs多层膜的组装过程进行监测,用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了邻苯二酚和对苯二酚同时存在时PDDA/CNTs多层膜电极上的电化学行为.结果表明,碳纳米管修饰电极对邻苯二酚和对苯二酚有较好的电催化活性和电分离作用,邻苯二酚和对苯二酚无需经过分离即可同时被检出.在修饰电极上的线性范围如下:邻苯二酚为2.0×10-6~1.4×10-4mol/L,线性相关系数R=0.9991;对苯二酚为2.0×10-6~1.4×10-4mol/L,线性相关系数R=0.9987.     

多孔炭载聚钴酞菁修饰电极用于苯二酚的电催化及检测

以二氧化硅纳米球为模板,通过葡萄糖的水热聚合反应制备了具有三维结构的多孔炭(PC)。采用电化学聚合方法将单体钴酞菁聚合在多孔炭修饰的玻碳电极(PC/GC)表面,制备了多孔炭载聚钴酞菁的修饰电极(Co-TAPc/PC/GC)。通过循环伏安法(CV)研究了间苯二酚、邻苯二酚和对苯二酚在此修饰电极的电化学响应。结果表明,相对于裸玻碳电极、多孔炭或聚钴酞菁单独修饰的电极,该修饰电极对3种同分异构体的酚类物质均有更好的电催化活性。利用计时安培技术,该修饰电极对间苯二酚、邻苯二酚及对苯二酚分别在5.0×10-6～5.0×10-4 mol/L,6.0×10-6～2.5×10-4 mol/L和2.0×10-6～8.0×10-4 mol/L范围内具有较好的线性响应。此修饰电极具有制备简单、响应灵敏、稳定性好等优点。     

对苯二酚和邻苯二酚的DPV法同时检测

利用电化学还原的方法制备了4-氨基吡啶共价修饰玻碳电极,通过循环伏安法研究了对苯二酚和邻苯二酚在此修饰电极上的电化学行为.结果表明,4-氨基吡啶修饰电极对对苯二酚和邻苯二酚有较好的电催化活性和电分离作用.利用微分脉冲伏安法,用4-氨基吡啶修饰电极可同时及定量检测对苯二酚和邻苯二酚,在2.5×10~(-6)~1.1×10~(-4)mol/L范围内,二者的微分脉冲伏安响应与浓度呈良好的线性关系.     

银掺杂聚L-甲硫氨酸修饰电极同时测定对苯二酚和邻苯二酚

用循环伏安法制备了银掺杂聚L-甲硫氨酸修饰玻碳电极,研究了对苯二酚和邻苯二酚在该修饰电极上的电化学行为,建立了同时测定对苯二酚和邻苯二酚的新方法.研究发现,在pH=5.0的磷酸盐缓冲溶液中,扫速为100 mV/s时,对苯二酚和邻苯二酚在银掺杂聚L-甲硫氨酸修饰玻碳电极上均出现1对氧化还原峰,峰电位分别为:Epa=0.228 V、Epc =0.162 V和Epa=0.347 V、Epc =0.287 V,二者的氧化峰电位差达119 mV,还原峰差达125 mV.在最佳的条件下,用差分脉冲伏安法同时测定邻苯二酚和对苯二酚的线性范围为3.00 ×10-6～1.00 ×10-4mol/L,检出限为8.0×10-7 mol/L(对苯二酚)和5.0×10-7 mol/L(邻苯二酚).此法用于废水样中对苯二酚和邻苯二酚的测定,获得满意结果.     

邻苯二酚和对苯二酚在电活化玻碳电极上的电化学行为及同时测定

制备了电活化的玻碳电极,利用循环伏安法研究了邻苯二酚和对苯二酚在该电极上的电化学行为,结果表明该电极对两者的氧化还原具有很好的电催化能力。在0.1 mol/L PBS(pH 7.0)中,采用示差脉冲伏安法对对苯二酚和邻苯二酚分别测定和同时测定,对苯二酚和邻苯二酚的氧化峰电流与其浓度分别在3.0×10-7～1.2×10-5 mol/L和1.0×10-7～1.2×10-5 mol/L范围内呈良好的线性关系,检测限分别为1.0×10-7和6.34×10-8mol/L(S/N=3)。该法已用于模拟废水样中对苯二酚和邻苯二酚的测定。     

纳米氧化铜-碳纳米管修饰玻碳电极同时检测邻、对苯二酚

以商品化纳米氧化铜和羧化碳纳米管作为玻碳电极修饰材料,结合了两种材料的放大电信号和电催化性能,所构建的复合物修饰电极可区分性质相近的同分异构体邻苯二酚和对苯二酚的信号,同时可进一步放大两种酚的峰电流。 因此该基于纳米氧化铜和碳纳米管的电化学传感器可用于邻苯二酚和对苯二酚的同时检测。 采用循环伏安法对复合物中两种材料的比例、修饰量以及支持电解质pH进行了优化:纳米氧化铜和碳纳米管质量比为5∶1,修饰量为9 μL,pH=7.4的磷酸盐缓冲溶液被用作电解质溶液。 在优化的条件下,邻苯二酚和对苯二酚的微分脉冲伏安扫描峰电流与浓度在6.0×10^-7~3.0×10^-3 mol/L范围内均呈良好的线性关系,检出限(S/N=3)分别为1.0×10^-7和1.6×10^-7 mol/L。 该方法具有成本低、操作简便、快速的特点,对实际水样的加标回收率在94.6%~101.1%范围内,具有较好的实际应用前景。     

聚L-半胱氨酸/多壁碳纳米管复合修饰电极同时测定邻苯二酚和对苯二酚

将羧基化多壁碳纳米管分散在L-半胱氨酸溶液中并滴涂在玻碳电极表面.将上述电极在pH 6.9的B-R缓冲溶液中,于-1.0～2.5 V的电位范围内进行电聚合,制备了聚L-半胱氨酸/多壁碳纳米管复合修饰电极(Pol-L-Cys/MWCNTs/GCE).研究发现,邻苯二酚和对苯二酚在聚L-半胱氨酸/多壁碳纳米管复合修饰电极上分别出现了一对氧化还原峰,且两者的氧化峰电位差达101 mV,提出了用微分脉冲伏安法同时测定邻苯二酚和对苯二酚的方法.氧化峰电流与邻苯二酚和对苯二酚的浓度在1.0×10-5～1.0×10-3mol·L-1呈线性关系,检出限(3S/N)均达1.0×10-5mol·L-1.修饰电极用于模拟样品中邻苯二酚和对苯二酚的测定,回收率在82.0%～107.0%之间.     

新型多壁碳纳米管/壳聚糖/离子液体修饰电极直接测量对苯二酚的研究

本文构建了一种新型多壁碳纳米管/壳聚糖/离子液体修饰电极.研究了支持电解质、酸度和扫描速度等因素对对苯二酚伏安响应的影响,获得了较优的实验条件.在0.1 mol/L pH=6.8磷酸盐缓冲溶液中测定对苯二酚,其氧化峰电流与对苯二酚浓度在8.0×10~(-7)～1.0×10~(-4) mol/L范围内呈良好的线性关系,检出限为7.9×10~(-8) mol/L.该电极对对苯二酚有较高的选择性,可直接测量对苯二酚,结果满意.     

一步电沉积纳米铜/石墨烯/壳聚糖复合膜修饰玻碳电极测定邻苯二酚

用一步电沉积法制备了纳米铜/石墨烯/壳聚糖复合膜修饰玻碳电极。用循环伏安法(CV)和差分脉冲伏安法(DPV)对邻苯二酚在该修饰电极的电化学行为进行了研究。实验结果表明,在pH值为7.0的磷酸盐缓冲液(PBS)中,该修饰电极对邻苯二酚具有良好的电催化作用,其电化学信号与邻苯二酚的浓度在1.0×10-6～2.0×10-4mol/L范围内呈良好的线性关系,线性相关系数为0.991。检出限为1×10-7mol/L。结果表明,纳米铜/石墨烯/壳聚糖复合膜修饰电极显著提高了邻苯二酚的电化学响应信号,并表现出良好的选择性和重现性。该方法成功用于水样中邻苯二酚含量的测定。     

石墨烯/铁氰化钴复合膜修饰玻碳电极同时测定对苯二酚、邻苯二酚和间苯二酚

采用滴涂法和电沉积法制备了石墨烯/铁氰化钴复合膜修饰玻碳电极. 用扫描电镜对该纳米复合膜进行了表征.用循环伏安法研究了对苯二酚(HQ)、邻苯二酚(CT)和间苯二酚(RS)在修饰电极上的电化学行为. 实验结果表明, 相对于裸玻碳电极和石墨烯修饰电极, HQ, CT 和RS 在石墨烯/铁氰化钴修饰电极上的氧化峰电流显著提高. 利用差分脉冲伏安法测定, HQ, CT 和RS 分别在1.0×10^－6～1.5×10^－4 mol/L, 1.0×10^－6～2.0×10^－4 mol/L 和3.5×10^－6～2.5×10^－4 mol/L浓度范围内与氧化峰电流呈良好的线性关系, 相关系数分别为0.991, 0.993 和0.992. 信噪比为3 时, HQ, CT 和RS 检出限分别为2.0×10^－7, 2.1×10^－7 和3.5×10^－7 mol/L. 将该方法用于水样分析, 回收率为95.6%～106.1%.     

Covalent modification of glassy carbon electrode with aspartic acid for simultaneous determination of hydroquinone and catechol

Glassy carbon electrode (GCE) is covalently modified with aspartic acid (Asp). The modified electrode is used for the simultaneous electrochemical determination of hydroquinone (HQ) and catechol (CC) and shows an excellent electrocatalytical effect on the oxidation of HQ and CC by cyclic voltammetry (CV) in 0.1 mol/L acetate buffer solution (pH 4.5). In differential pulse voltammetric (DPV) measurements, the modified electrode could separate the oxidation peak potentials of HQ and CC present in binary mixtures by about 101 mV though the bare electrode gave a single broad response. A successful elimination of the fouling effect by the oxidized product of HQ on the response of CC has been achieved at the modified electrode. The determination limit of HQ in the presence of 0.1 mmol/L CC was 9.0 x 10(-7) mol/L and the determination limit of CC in the presence of 0.1 mmol/L HQ was 5.0 x 10(-7) mol/L. The proposed method has been applied to the simultaneous determination of HQ and CC in a water sample with simplicity and high selectivity.     

抗坏血酸在离子液体修饰玻碳电极上的电化学行为

利用离子液体1-丁基-3-甲基咪唑四氟硼酸盐(BMIMBF4)对玻碳电极(GCE)进行修饰,制备了BMI-MBF4/GCE电极.在0.1mol/L的磷酸盐缓冲溶液中,采用循环伏安法研究了抗坏血酸在BMIMBF4/GCE电极和裸玻碳电极(GCE)上的电化学行为.结果表明,pH=5.7的磷酸盐缓冲溶液为最佳测定底液,最佳富集时间为120s;BMIMBF4/GCE对抗坏血酸的氧化反应有很好的电化学催化作用.抗坏血酸的氧化峰电流与其浓度在2.0×10-4～1.0×10-2 mol/L的范围内呈良好的线性关系,相对标准偏差为4.53%(n=5).     

Cysteamine Capped Silver Nanoparticles and Single‐walled Carbon Nanotubes Composite Coated on Glassy Carbon Electrode for Simultaneous Analysis of Hydroquinone and Catechol

A stable complex of silver nanoparticles (Ag NPs) capped by cysteamine (Cst) together with single‐walled carbon nanotube (CNTs) was used to modify a glassy carbon electrode (GCE) for simultaneous detection of hydroquinone (HQ) and catechol (CT). The resulting electrode (AgCst‐CNTs/GCE) showed excellent electrocatalysis and reversibility towards this electroactive pair. The peak separations of their oxidation‐reduction peaks decreased significantly, compared with those of the unmodified GCE. The signal responses of the AgCst‐CNTs/GCE were 5‐fold higher while its peak potential separation remained unchanged (ca. 130 mV), compared to the CNTs‐modified GCE. The oxidation peak currents obtained for HQ and CT exhibited linearly from submicromolar to hundred micromolar concentrations without any cross‐interference. The modified electrode possessed a very large active surface area with a detection limit (S/N=3) of 10 and 40 nM for HQ and CT, respectively. The sensor was demonstrated for the analysis of river water and topical cream as evinced by high accuracy and reproducibility.     

A sensor based on the carbon nanotubes-ionic liquid composite for simultaneous determination of hydroquinone and catechol

MWNTs-IL-Gel/GCE, a glassy carbon electrode modified with multiwalled carbon nanotubes (MWNTs) and ionic liquids (IL), was developed to serve as a sensor for simultaneous determination of Hydroquinone (HQ) and catechol (CC) in this paper. The modified GCE showed two well-defined redox waves for HQ and CC in both CV and DPV with a peak potential separation of ca. 0.1 V, which was large enough for simultaneous detection. The results revealed that the oxidation of HQ and CC with the enhancement of the redox peak current and the decrease of the peak-to-peak separation exhibit excellent electrocatalytic behaviors. A high sensitivity of 1.8×10(-7)M with detection limits of 6.7×10(-8)M and 6.0×10(-8)M (S/N=3) for HQ and CC were obtained. Moreover, the constants of apparent electron transfer rate of HQ and CC at MWNTs-IL-Gel/GCE were calculated as 7.402 s(-1) and 8.179 s(-1), respectively, and the adsorption quantity of HQ and CC was 1.408×10(-6) mol cm(-2) with chronocoulometry. The developed sensor can be applied to determinate directly of HQ and CC in aqueous solution.     

介孔炭/纳米金修饰玻碳电极的制备及其应用研究

制备了介孔炭/纳米金修饰玻碳电极,并对对苯二酚(HQ)在该修饰电极上的电化学行为进行了研究。与HQ在纯介孔炭材料修饰玻碳电极上的电化学响应相比,HQ在该修饰电极上的氧化峰和还原峰电流均大大增加,表明纳米金与介孔炭复合后对HQ具有良好的催化作用。HQ在该修饰电极上经过富集后,峰电流明显增大。采用循环伏安法对HQ电化学行为进行研究,结果表明,HQ在3.0×10-8~1.0×10-6mol/L和1.0×10-6~1.0×10-4mol/L浓度范围内与峰电流呈良好的线性关系,据此建立了检测HQ的电化学分析方法。该方法的相对标准偏差为0.69%,检出限(S/N=3)为1.0×10-8mol/L,具有较高的稳定性和灵敏度。     

Electrochemical behavior of dihydroxybenzene isomers at MWCNTs modified electrode and simultaneous determination in neutral condition

Simultaneous determination of dihydroxybenzene isomers in neutral condition was successfully realized by a simple and easy prepared modified electrode without previous chemical or physical separations. The multi-walled carbon nanotubes modified glassy carbon electrode (MWCNTs/GCE), which was prepared by the drop-coating method, was characterized by FE-SEM and TEM. Then, the electrochemical behavior of dihydroxybenzene isomers at MWCNTs/GCE was systematically studied at different temperature and pH conditions. The oxidation peak potentials were separated in neutral condition with 105 mV to hydroquinone (HQ) and catechol (CC) and 390 mV to CC and resorcinol (RS). And in neutral condition, the amperometric current were found to be linear with concentration of HQ, CC, and RS (20–140 μM) with the presence of 100 μM other isomers. Furthermore, excellent anti-interference, stability, and reproducibility were also presented by this modified electrode.     

槲皮素在氧化锆修饰玻碳电极上的伏安行为及检测

制备了氧化锆修饰的玻碳电极,采用示差脉冲伏安法和循环伏安法探究了槲皮素在该电极上的电化学行为。结果表明,制备的修饰电极在pH=7.00的磷酸盐缓冲溶液（PBS）中对槲皮素的氧化还原具有明显的电催化作用。采用槲皮素的氧化峰电流作为分析信号。在浓度为2.5×10-8~5×10-5 mol/L的范围内,氧化峰电流和浓度成良好的线性关系,线性方程为ip（μA）=0.0825c-9.861 84,检出限为5.35×10-9 mol/L。