离子液体中聚3-己基噻吩的制备及电致变色性质和器件的研究

以室温离子液体1-丁基-3-甲基咪唑六氟磷酸盐[BMIM]PF₆为溶剂及支持电解质,通过电化学方法制备聚(3-己基噻吩)(PHexT)膜。采用循环伏安法和扫描电子显微镜,对膜的电化学性质及形貌结构进行表征。同时通过紫外可见光谱、计时电流、计时库仑以及计时吸收曲线等方法研究聚合物膜的光谱电化学和电致变色特性,并在此基础上制备PHexT膜的电致变色器件。实验结果表明,在离子液体中制备的PHexT膜光滑致密,掺杂态时为蓝色,脱掺杂时为桔红色,并且具有高的颜色对比度 (40%),较短的响应时间 (2.5 s) 和高的电致变色着色效率 (230cm²/C),该膜制成的固态电致变色器件具有很好的电致变色性能和长的循环寿命。     

紫精-普鲁士蓝凝胶电致变色器件的制备

合成了醛基功能化的紫精,1,1′-二醛己基-4,4′-联吡啶,通过与聚乙烯醇的缩醛反应将紫精固定到凝胶电解质中,对电极用电沉积法沉积普鲁士蓝,制备了新型凝胶型电致变色器件。这种凝胶电致变色器件避免了电解质泄露的风险并拓宽了电致变色器件的应用范围。采用1 HNMR对分子结构进行了表征,通过紫外-可见分光光度计研究了器件的电致变色性能及其影响因素。结果表明:采用将紫精通过共价键并入凝胶的方法,制备的器件在±2V的工作电压下具有47%的对比度,着色时间2.8s,褪色时间3.3s,并且具有良好的循环稳定性。     

金属-超分子聚合物的合成及其多色电致变色器件

本文合成了一种多齿配体化合物——1,4-双(2,2′:6′,2′′-三联吡啶-4′-基)苯及其Fe/Ru金属-超分子聚合物——Poly Fe和Poly Ru,同时以喷涂在ITO导电玻璃上的Fe/Ru金属-超分子聚合物膜为工作电极、0.1 mol/L Li Cl O4水溶液为电解质,并添加K_3Fe(CN)_6为电化学互补材料,制作了系列电致变色器件.由Poly Fe和Poly Ru的组合,可以得到从Poly Fe的蓝紫色渐变到Poly Ru橙红色的彩色薄膜及其多色电致变色器件,器件响应速度快(2 s),褪色电压0.9~1.2 V,着色电压0 V,最大光学对比度约57%.添加K_3Fe(CN)_6后,器件的寿命得到极大提高.     

磷腈-紫精聚合物的合成与电致变色性能

以六氯环三磷腈作为核心、紫精为电致变色活性基,合成了一种新型有机-无机杂化电致变色材料六(1-乙基-4,4’-联吡啶-甲基苯氧基)环三磷腈(PHV²⁺).通过傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)及核磁共振氢谱(1H NMR)表征了PHV²⁺的结构.优良的水溶性使得该化合物可以通过简单的方法构造一个以聚乙烯醇(PVA)为凝胶基质的电致变色水凝胶,具有成本低廉及无毒害的优点.以氟掺杂氧化锡(FTO)涂层玻璃作为电极材料,PHV²⁺作为电致变色材料制备了PHV²⁺/PVA/KCl电致变色器件(PHV²⁺/PVA/KCl ECD).该电致变色器件在2. 1 V电压下由淡黄色变为紫色,颜色变化明显,并且该颜色变化可以循环500次;器件在526 nm处的光学对比度达到62. 19%.良好的电致变色性质使该化合物在电致变色器件方面具有潜在应用价值.     

MoO_3电致变色薄膜的XPS研究

近年来 ,随着人们提倡节能和使用洁净能源 ,无机电致变色材料在建筑物采光控制系统和反射率可调表面的应用研究 ,已成为材料领域的一个新热点 .WO3、 MoO3等过渡金属氧化物薄膜具有良好的电致变色效应 ,是人们研究的重点 .其中 MoO3的电致变色效果要好于 IrO2、 TiOx、 CoO及 NiOx等电致变色材料 [1],而且它在可见光区有比 WO3更柔和的色彩 ,使人眼更易于适应其颜色变化 .着色态的 MoO3称为钼青铜 ,其开路记忆也好于钨青铜 [2].故 MoO3电致变色薄膜是极有潜力用于实用化的电致变色器件 .MoO3薄膜常用的制备方法有真空蒸 发、化学气…     

获得高性能电致变色薄膜的ITO表面修饰方法

氧化铟锡玻璃(ITO)以其优良的导电性能和透过率以及相对低的反应活性使其在显示器和电致变色器件中有广泛的应用. 然而, ITO表面的金属氧化物基团也带来了一些问题, 如通过物理方法沉积的电致变色薄膜易从ITO基底上脱离, 从而降低器件寿命, 此种问题在使用液体电解质时显得尤为突出. 为此, 我们利用有机酸小分子对ITO基底表面进行修饰, 继而利用电化学沉积的方法制备聚3,4-(2,2-二甲基丙烯二氧基)噻吩电致变色薄膜. XPS结果表明基底与修饰物间以化学键结合, 超声波处理可以看出电致变色薄膜在修饰后的基底上有更好的稳定性. 本研究提供了一种简单易行的方法来获得高性能的高分子电致变色薄膜.     

纳米TiO2膜负载聚(3-溴噻吩)的电化学聚合和电色效应研究

本文以纳米多孔的TiO2膜为基底,通过恒电流阳极聚合的方法制备聚(3-溴噻吩) (PBrT)膜,并研究负载在纳米TiO2膜上PBrT的电致变色性能。采用原子力显微镜(AFM)对纳米TiO2膜的形貌进行表征。利用紫外吸收光谱、计时安培法、计时吸收法研究PBrT膜的电致变色性能。结果显示,沉积在纳米多孔TiO2膜上的PBrT具有更优越的电致变色性能。PBrT膜氧化态时为亮红色,还原态时为深蓝色,颜色的对比度为22%,库仑效率为70%,着色效率为191.3 cm2 C-1（还原态）,88.9 cm2 C-1（氧化态）,该聚合膜具有良好的记忆效应。PBrT/TiO2优异的电致变色性能使其成为良好的电致变色材料,在电致变色器件方面具有潜在的应用价值。     

TiO2-PTPAT纳米核/壳结构复合膜的制备及电致变色性能

通过水热法在氟掺杂氧化锡(FTO)导电玻璃基底上制备了垂直生长的二氧化钛(TiO₂)纳米棒阵列, 以TiO₂纳米棒阵列为模板采用电化学聚合法, 原位制备了TiO₂-聚三[2-(4-噻吩)苯]胺(PTPAT)纳米核/壳结构的复合薄膜, 相比于纯PTPAT薄膜, TiO₂-PTPAT复合薄膜显示出更好的电致变色(EC)性能. PTPAT薄膜在600 nm波长下的对比度为28%, 在1100 nm波长下的对比度为60%, 其褪色时间为3.86 s, 着色时间为5.52 s; TiO₂- PTPAT复合薄膜在600 nm波长下的对比度为43%, 在1100 nm波长下的对比度为79%, 其褪色时间为3.35 s, 着色时间为4.43 s, 表明核/壳复合结构薄膜的光学对比度和响应时间性能更加优异. 将PTPAT薄膜和TiO₂-PTPAT复合薄膜作为电致变色层组装成固态EC器件, 基于复合薄膜的器件具有更好的循环稳定性和更高的耐受电压. 复合薄膜在保持PTPAT薄膜原有的EC性能的基础上, 由于有序生长的纳米阵列结构的引入增加了薄膜的比表面积, 为电致变色过程中离子的掺杂和脱掺杂提供了更多有序通道, 从而加快了离子扩散速度. TiO₂阵列的引入也改善了聚合物薄膜与透明导电电极之间的界面结合情况, 从而提升了器件的稳定性.     

石墨烯-ITO复合电极对聚苯胺薄膜电致变色性质的影响

采用改进的Hummers法制备氧化石墨烯(GO),首先,石墨与浓硫酸、过硫酸钾和五氧化二磷反应制得强氧化产物,随后将其与浓硫酸、硝酸钠、高锰酸钾反应,经双氧水发泡、酸洗、超声等合成氧化石墨烯水溶液,再通过金属箔还原和基底转移过程制备GO-氧化铟锡(ITO)复合电极材料.通过金属箔还原和基底转移过程制备GO-氧化铟锡(ITO)复合电极材料.利用电化学聚合法在GO-ITO复合电极上制备聚苯胺(PANI)薄膜,并对其形貌结构、电化学及电致变色性质进行表征.结果表明,与ITO电极相比,采用GO-ITO复合电极制备的PANI的成膜性得到明显改善,复合电极具有更加均匀细致的颗粒表面,增大了聚合物与电解液之间的接触面积,为电致变色过程中平衡离子的注入/脱出提供了更多的通道,因而PANI薄膜在700nm处的光学对比度提高了约13%,响应速度缩短了约2.6 s,着色效率高达169.6 cm2/C.GO的引入保持了PANI良好的电化学稳定性.GO-ITO复合电极有效改善了聚合物的综合性能,对于聚合物电致变色材料及器件的开发具有潜在的应用前景.     

脉冲激光沉积制备氧化铋薄膜的电致变色性质

通过电位阶跃和循环伏安结合现场电感偶合分光光度计(CCD)测量了脉冲激光沉积的四方结构Bi2O3薄膜的电致变色性质. 结果表明, 在波长为630 nm处出现一个明显的吸收峰, Bi2O3薄膜电极的着色时间为30 s. 吸光度-电位谱图表明, 当电位在3.5 - 0.7 V之间变化时, Bi2O3薄膜的颜色可明显地呈现由透明到暗棕色的可逆变化, 重复次数可达50 次, 在630 nm测得的着色效率约为15 cm2·C-1.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.