Solubility and Phase Behavior of Cr(III) Oxides in Alkaline Media at Elevated Temperatures

A platinum-lined, flowing autoclave facility is used to investigate the solubility behavior of Cr₂O₃ and FeCr₂O₄ in alkaline sodium phosphate, sodium hydroxide, and ammonium hydroxide solutions between 21 and 288°C. Baseline Cr(III) ion solubilities were found to be on the order of 0.1 nmolal, which were enhanced by the formation of anionic hydroxo and phosphato complexes. At temperatures below 51°C, the activity of Cr(III) ions in aqueous solution is controlled by a Cr(OH)₃·3H₂O solid phase rather than Cr₂O₃; above 51°C the saturating solid phase is -CrOOH. Measured chromium solubilities were interpreted via a Cr(III) ion hydrolysis/complexing model and thermodynamic functions for the hydrolysis/complexing reaction equilibria were obtained from least-squares analyses of the data. The existence of four new Cr(III) ion complexes is reported: Cr(OH)₃(H₂PO₄)^–, Cr(OH)₃(HPO₄)^2–, Cr(OH)₃(PO₄)^3–, and Cr(OH)₄(HPO₄)-(H₂PO₄)^4–. The last species is the dominant Cr(III) ion complex in concentrated, alkaline phosphate solutions at elevated temperatures.     

Reaction of (±)-1,1′-binaphthyl-2,2′-diyl hydrogen phosphate {(±)-phosH} with copper(II), cobalt(II) and iron(II) compounds; Identification by x-ray diffraction of [Co(CH3OH)4(H2O)2][(+)-phos][(−)-phos]. 2CH3OH·H2O

[Cu₂(μO₂CCH₃)₄(H₂O)₂], [CuCO₃·Cu(OH)₂], [CoSO₄·7H₂O], [Co((+)-tartrate)], and [FeSO₄·7H₂O] react with excess racemic (±)- 1,1′-binaphthyl-2,2′-diyl hydrogen phosphate {(±)-PhosH} to give mononuclear Cu^II, Co^II and Fe^II products. The cobalt product, [Co(CH₃OH)₄(H₂O)₂]((+)-Phos)((−)-Phos) ·2CH₃OH·H₂O (7), has been identified by X-ray diffraction. The high-spin, octahedral Co^II atom is ligated by four equatorial methanol molecules and two axial water molecules. A (+)- and a (−)-Phos⁻ ion are associated with each molecule of the complex but are not coordinated to the metal centre. For the other Co^II, Cu^II and Fe^II samples of similar formulation to (7) it is also thought that the Phos⁻ ions are not bonded directly to the metal. When some of the Cu^II and Co^II samples are heated under high vacuum there is evidence that the Phos⁻ ions are coordinated directly to the metals in the products.     

Redox Equilibria in the System Fe(OH)3(H2SO4)-Na2SO3-H2O Involving Precipitation of Iron(II) Sulfite as a Fe2O3 Precursor

Experimental data on the equilibria Fe²⁺/Fe³⁺ and SO₃ ²⁻/SO₄ ²⁻ in the system Fe(OH)₃(H₂SO₄)-Na₂SO₃-H₂O are presented. The quantitative relations between the reduction of Fe(III) and the precipitation of FeSO₃·2.5H₂O as a Fe₂O₃ precursor have considered graphically.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 1, 2005, pp. 41–44.Original Russian Text Copyright © 2005 by Vasekha, Motov.     

Effect of Cationic Micelles on the Kinetics of Interaction of [Cr(III)-Gly-Gly] with Ninhydrin

The effect of cationic micelles of cetyltrimethylammonium bromide (CTAB) on the interaction of chromium dipeptide complex ([Cr(III)-Gly-Gly]²⁺) with ninhydrin under varying conditions has been investigated. The rates of the reaction were determined in both water and surfactant micelles in the absence and presence of various organic and inorganic salts at 70 °C and pH 5.0. The reaction followed first- and fractional-order kinetics with respect to [Cr(III)-Gly-Gly²⁺] and [ninhydrin]. Increase in the total concentration of CTAB from 0 to 40×10⁻³ mol·dm⁻³ resulted in an increase in the pseudo-first-order rate constant (kψ) by a factor of ca 3. Quantitative kinetic analysis of kψ−[CTAB] data was performed on the basis of the pseudo-phase model of the micelles. As added salts induce structural changes in micellar systems that may modify the substrate-surfactant interactions, the effect of some inorganic (NaBr, NaCl, Na₂ SO₄) and organic (NaBenz, NaSal, NaTos) salts on the rate was also explored. It was found that the tightly bound counterions (derived from organic salts) were the most effective.     

Synthesis, crystal structures, phase transition characterization and thermal decomposition of a new dabcodiium hexaaquairon(II) bis(sulfate): (C6H14N2)[Fe(H2O)6](SO4)2

The crystal structures of 1,4-diazabicyclo[2.2.2]octane (dabco)-templated iron sulfate, (C₆H₁₄N₂)[Fe(H₂O)₆](SO₄)₂, were determined at room temperature and at −173 °C from single-crystal X-ray diffraction. At 20 °C, it crystallises in the monoclinic symmetry, centrosymmetric space group P2₁/n, Z=2, a=7.964(5), b=9.100(5), c=12.065(5) Å, β=95.426(5)° and V=870.5(8) ų. The structure consists of [Fe(H₂O)₆]²⁺ and disordered (C₆H₁₄N₂)²⁺ cations and (SO₄)²⁻ anions connected together by an extensive three-dimensional H-bond network. The title compound undergoes a reversible phase transition of the first-order at −2.3 °C, characterized by DSC, dielectric measurement and optical observations, that suggests a relaxor–ferroelectric behavior. Below the transition temperature, the compound crystallizes in the monoclinic system, non-centrosymmetric space group Cc, with eight times the volume of the ambient phase: a=15.883(3), b=36.409(7), c=13.747(3) Å, β=120.2304(8)°, Z=16 and V=6868.7(2) ų. The organic moiety is then fully ordered within a supramolecular structure. Thermodiffractometry and thermogravimetric analyses indicate that its decomposition proceeds through three stages giving rise to the iron oxide.     

Ferric hydrous oxide sols I. Monodispersed basic iron(III) sulfate particles

The methods of preparation of basic ferric sulfate sols consisting of particles uniform in shape of extremely narrow size distribution are described in detail. To produce such sols, acidic solutions containing ferric ions and sulfate ions were aged at elevated temperatures for a few hours. Solids formed from solutions containing a mixture of a ferric salt with a metal sulfate consisted of Fe₃(SO₄)₂(OH)₅· 2H₂O, which is the basic formulation for the alunite mineral group, whereas particles formed from ferric sulfate solutions also included Fe₄(SO₄)-(OH)₁₀ in varying proportions. The morphology of the particles was strongly dependent on the [Fe³⁺]: [SO₄²⁻] ratio in solution. Changes in the cation (K⁺, NH₄⁺, Na⁺) of the sulfate salt used in the mixture with ferric nitrate solutions greatly affected the particle size and also exhibited some effect on the lattice parameters. Certain cations (Mg²⁺, Ni²⁺, Cu²⁺) completely inhibited particle formation. During the first few hours of growth of the Fe₃(SO₄)₂-(OH)₅· 2H₂0 particles their diameters increased essentially linearly with time, indicating that the rate determining step was the surface reaction. The relevance of these systems to the study of corrosion of iron and steel is discussed.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

[H3tren] templated iron fluorides; synthesis, crystal structures and Mössbauer studies

The hydrothermal synthesis, using tris-(2-ethylamino)amine (tren) as a template, and the crystal structures of three new hybrid iron fluorides, (H₃O)₂·[H₃tren]₂·(FeF₆)₂·(FeF₅(H₂O))·2H₂O (I), [H₃tren]₂·(FeF₆)₂·(FeF₂(H₂O)₄)·8H₂O (II) and [H₃tren]₂·(FeF₆)·(F)₃·H₂O (III), are reported. I, II, and III are triclinic (P-1), monoclinic (P2₁/c) and orthorhombic (I222), respectively. The structure of I is built up from isolated FeF₆ and FeF₅(H₂O) distorted octahedra separated by triprotonated [H₃tren]³⁺ cations, disordered H₃O⁺ cations and H₂O molecules. In II, Fe^IIIF₆ and neutral [Fe^IIF₂(H₂O)₄] octahedra form, together with [H₃tren]³⁺ cations, infinite (100) layers separated by extra water molecules. The structure of III consists of isolated and disordered FeF₆ octahedra, fluoride anions F⁻ connected to [H₃tren]³⁺ cations and extra fluoride anions F⁻ disordered with H₂O molecules. All [H₃tren]³⁺ cations have a “spider” type conformation. ⁵⁷Fe Mössbauer characterization shows that +III valence state can only be considered for iron cations in I and III and preliminary Mössbauer results are consistent with the presence of both +II and +III valences for iron cations in II, in agreement with the crystallographic results.     

Factors controlling electron transfer reactions and stabilisation of uncommon oxidation states of chromium

Some experimental approaches to seek semi-quantitative understanding of factors controlling outer sphere electron transfer reactions of some transition metal complexes have been made. The relative importance of nuclear and electronic factors to outer sphere processes has been examined. By the manipulation of Franck-Condon or nuclear factors, it has now been possible to gain access into the chemistry of chromium in unusual oxidation states. An example of a reorganisation controlled electron transfer reaction involving Cr(IV)-Cr(III) system has been demonstrated. The bimolecular rate of reduction of diperoxoaquaethylenediamine chromium(IV) and diperoxodiethylenetriamine chromium(IV) is independent of the nature of th reductant employed viz. Fe²⁺ or VO²⁺ indicating that the generation of6 coordinate Cr(IV) species from7 coordinate of diperoxochromium(IV) reactant may be rate limiting. Similarly by increasing the barrier for the6 coordinate to4 coordinate structures through equatorial coordination of macrocyclic ligands, it has now been possible to detect through cyclic voltommogram the formation of relatively stable Cr(IV) species in the electrochemical oxidation of Cr(Me₄[14] tetraene)(H₂O) ₂ ³⁺ in aqueous sulphuric acid media. The kinetics and mechanism of the cerium(IV) and iodosyl benzene oxidation of Cr(salen)(H₂O) ₂ ⁺ and Cr(salprn)(H₂O) ₂ ⁺ have been investigated and kinetic and spectroscopic evidence for the formation of Cr(IV) transients and stable Cr(V) products has been presented. The relative importance of Franck-Condon factors in the oxidation of Cr(III) to Cr(IV) and Cr(V) states in different macrocyclic and multidentate ligand environments has been discussed.     

Crystal Structure and Spin Frustration Behavior of an Oxo‐centered Trinuclear Chromium(III) Complex

A trinuclear chromium(III) complex, [Cr₃O(HCO₂)₆(CH₃OH)₃]NO₃·H₂O·CH₃OH ( 1 ), is synthesized and structurally characterized by single‐crystal X‐ray diffraction. Three chromium(III) ions are bridged by one oxygen atom in the center, forming a triangular structure. The HCOO ^? anion acts as bidentate ligand and bridges couples of Cr(III) ions. Magnetic susceptibility measurement indicates that a strong antiferromagnetic interaction is operative between chromium(III) ions, and the S = 1/2 ground state reveals normal spin frustration behavior.     

Flow-Injection Chemiluminescence as a Means of Studying the Metabolism of Unbound Chromium(III) in Rabbit Blood with On-Line Microdialysis Sampling

In this paper, we present an in-vivo, on-line, real-time analytical system for monitoring the metabolism of free chromium(III) in rabbit blood. This system includes microdialysis sampling, ion-exchange on-line separation and chemiluminescence detection. The results show that none of the co-existing substances in the blood, including protein and other small molecules, interfere with the determination. CrCl₃·6H₂O was administrated orally (0.5 g), and the microdialysis probe was utilized to sample rabbit blood with a perfusion rate of 10 µL min⁻¹. The dialytic efficiency of chromium(III) under the experimental conditions was 18.1 ± 5.1% (n=3). The concentration-time curve of chromium(III) is in accordance with the one-compartmental open model, the T_1/2 is 16.62 min.     

Antiferromagnetic complexes involving metal---metal bonds IV. Synthesis, molecular structure and magnetic properties of the heterotrinuclear cluster, (C5H5Cr)2(μ-SCMe3)(μ-S)2Fe(CO)3, with direct and indirect exchange between Cr and Fe centers

The photochemical reaction between the antiferromagnetic complex (C₅H₅-CrSCMe₃)₂S (I) (containing a Cr---Cr bond 2.689 Å long) and Fe(CO)₅ results in the elimination of two carbonyl groups and one tert-butyl radical to give (C₅H₅Cr)₂(μ²-SCMe₃)(μ³-S)₂ · Fe(CO)₃ (III). As determined by X-ray diffraction, III contains a Cr---Cr bond of almost the same length as in I (2.707 Å), together with one thiolate and two sulphide bridges. The latter are also linked with the Fe atom of the Fe(CO)₃ moiety (average Fe---S bond length 2.300 Å). Fe also forms a direct bond, 2.726 Å long, with one of the Cr atoms, whereas its distance from the other Cr atom (3.110 Å) is characteristic for non-bonded interactions. Complex III is antiferromagnetic, the exchange parameter, −2J, values for Cr---Cr, Cr(1)---Fe and Cr(2)…Fe are 380, 2600 and 170 cm⁻¹, respectively. The magnetic properties of III are discussed in terms of the “exchange channel model”. The contributions from indirect interactions through bridging ligands are shown to be insignificant compared with direct exchange involving metal---metal bonds. The effects of steric factors and of the nature of the M(CO)_n fragments on the chemical transformations of (C₅H₅CrSCMe₃)₂S · M(CO)_n are discussed.     

Adjustment of dimensionality in covalent frameworks formed by Co and rhenium cluster chalcocyanide [Re6S8(CN)6]

The synthesis and X-ray structure of a new cluster compound (Pr₄N)₂Co[Re₆S₈(CN)₆] · 6H₂O is reported. It crystallizes in orthorhombic symmetry, P2₁2₁2₁ space group with four formula units per unit cell. The following parameters were found: a = 17.942(9) Å, b = 17.979(4) Å, c = 16.344(8) Å, V=5272 0rA³, ρ_calc=2.607 g cm⁻¹; final R=0.0331. The compound was prepared by interaction of layered Cs₂Co[Re₆S₈(CN)₆] · 2H₂O with aqueous solution of Pr₄NBr. This interaction results in cleavage of covalently linked {Co(H₂O)₂Re₆S₈(CN)₆}_2α²⁻ sheets and in formation of isolated fragments {Co(H₂O)₅Re₆S₈(CN)₆}^u2−. Heating of (Pr₄N)₂Co[Re₆S₈(CN)₆] · 6H₂O results in elimination of two water molecules and in formation of (Pr₄N)₂Co[Re₆S₈(CN)₆] · 4H₂O containing infinite -Co(H₂O)₄-NC-Re₆S₈(CN) ₄-CN-Co(H₂O)₄-chains.     

Kinetics of anation of chromium(III) by L-phenylalanine

Summary The kinetics of anation of chromium(III) species, [Cr(H₂O)₆]⁴⁺ and [Cr(H₂O)₅OH]²⁺, by L-phenylalanine in aqueous acid has been studied spectrophotometrically. Effects of varying [substrate], [ligand], [H⁺], , % ethanol and temperature were investigated. The kinetic data suggest a mechanism where outersphere-associations [between chromium(III) species and phenylalanine in the zwitterionic form] precede anation. Comparison of the results with published data suggest an I_a path for the [Cr(H₂O)₆]³⁺ reaction and I_d path for the [Cr(H₂O)₅OH]²⁺ reaction.     

α-Glycyl cation, radical, and anion (H2NCH+/·/−COOH): Generation and characterization in the gas phase

The title species are synthesized in the gas phase and their unimolecular chemistry is determined by a combination of tandem mass spectrometry methods. Dissociative electron ionization of the α-amino acids valine, leucine, isoleucine, or serine produces the α-glycyl cation, H₂NCH⁺COOH, in high yield and purity. At threshold, this ion dissociates by CO loss to form the proton-bound complex HCNH⁺OH₂ via a tight 1,4-H migration that is associated with a high reverse barrier. After collisional activation, additional channels open, most notably the formation of the complementary and structure-characteristic fragments H₂NCH^+· (ionized aminocarbene) and ⁺COOH and the elimination of OH^·. Charge reversal and neutralization–reionization of H₂NCH⁺COOH conclusively show that α-glycyl anion, H₂NCH⁻COOH, and α-glycyl radical, H₂NCH^·COOH, are stable species residing in deep potential energy wells. In the microsecond time window of the experiments, a small fraction of the α-glycyl radical decomposes by sequential elimination of H₂O and CO. The α-glycyl anions arising by charge reversal of the cation or reionization of the radical partly undergo rearrangement losses of H₂ and H₂O, direct cleavages to ⁻COOH, OH⁻, and H₂N⁻, and consecutive fragmentation of these primary product anions.     

Chromium(III)-Ettringite Formation and its Thermal Stability

Attempts have been made to replace aluminium(III) by chromium(III) in the ettringite structure because of practical importance of a waste treatment technology. The optimum conditions of Ca₆[Cr(OH)₆]₂(SO₄)₃⋅26H₂O formation and its thermal stability are reported. This revised version was published online in July 2006 with corrections to the Cover Date.     

Oxidative degradation of non-ionic surfactant (TritonX-100) by chromium(VI)

Degradation of polyoxyethylene chain of non-ionic surfactant (TritonX-100) by chromium(VI) has been studied spectrophotometrically under different experimental conditions. The reaction rate bears a first-order dependence on the [Cr(VI)] under pseudo-first-order conditions, [TritonX-100]  [Cr(VI)] in presence of 1.16 mol dm⁻³ perchloric acid. The observed rate constant (k_obs) was 3.3 × 10⁻⁴ to 3.5 × 10⁻⁴ s⁻¹ and the half-life (t_1/2) was 33–35 min for chromium(VI). The effects of total [TritonX-100] and [H⁺] on the reaction rate were determined. Reducing nature of non-ionic TritonX-100 surfactant is found to be due to the presence of –OH group in the polyoxyethylene chain. It was observed that monomeric and non-ionic micelles of TritonX-100 were oxidized by chromium(VI). When [TritonX-100] was less than its critical micelle concentration (cmc) the k_obs values increased from 0.76 × 10⁻⁴ to 1.5 × 10⁻⁴ s⁻¹. As the [TritonX-100] was greater than the cmc, the k_obs values increases from 2.1 × 10⁻⁴ to 8.2 × 10⁻⁴ s⁻¹ in presence of constant [HClO₄] (1.16 mol dm⁻³) at 40 °C. A comparison was made of the oxidative degradation rates of TritonX-100 with different metal ion oxidants. The order of the effectiveness of different oxidants was as follows: permanganate > diperiodatoargentate(III) > chromium(VI) > cerium(IV).     

Dinitrogen and carbon monoxide hydrogen bonding in protonic zeolites: Studies from variable-temperature infrared spectroscopy

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-Y results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted-acid groups. This hydrogen-bonding interaction leads to activation, in the infrared, of the fundamental N–N stretching mode, which appears at 2334 cm⁻¹. From infrared spectra taken over a temperature range, the standard enthalpy of formation of the OH···N₂ complex was found to be ΔH⁰ = −15.7(±1) kJ mol⁻¹. Similarly, variable-temperature infrared spectroscopy was used to determine the standard enthalpy change involved in formation of H-bonded CO complexes for CO adsorbed on the zeolites H-ZSM-5 and H-FER; the corresponding values of ΔH⁰ were found to be −29.4(±1) and −28.4(±1) kJ mol⁻¹, respectively. The whole set of results was analysed in the context of other relevant data available in the literature.     

Cation → anion energy transfer in [Cr(en)3][Cr(CN)6]·2H2O

Energy transfer from Cr(en)₃³⁺ to Cr(CN)₆³⁻ has been observed in [Cr(en)₃][Cr(CN)₆]·2H₂O with an efficiency close to unity. The ⁴T₂ & rt arrow-wavy; ²E intersystem crossing efficiency in Cr(en)₃³⁺ is also unity.     

A polynuclear mixed-valent ruthenium oxide/cyanoruthenate composite that yields thin coatings on a glassy carbon electrode with high catalytic activity toward methanol oxidation

Polynuclear ruthenium oxide/cyanoruthenate films on carbon substrates were grown by cycling the potential between 0.5 and 1.0 V (vs SCE) for 5–90 min in fresh 2 mM RuCl₃·3 H₂O, 2 mM K₄Ru(CN)₆·3 H₂O, 0.5 M KCl solution at pH 2. During the positive scans, the cationic Ru(III,IV)-oxo polynuclear species interacted with the simultaneously formed anionic CN-bridged Ru dimers to yield sparingly soluble deposits on the electrode surfaces. Different thicknesses, typically corresponding to 2–50×10⁻¹⁰ mol cm⁻², could be obtained by varying the cycling times. The absorption spectra of the coatings obtained at SnO₂-covered glass electrodes were different from those known for RuO₂ films and exhibited two absorption bands at about 400 and 700 nm. IR spectroscopic measurements confirmed the presence of a CN group in the deposit, as well as showing significant aquation of the entire coating. Ru, O, N and K (from KCl) were detected by means of Auger electron spectroscopy. The surface electrochemistry and stability of the film were significantly enhanced in K⁺-containing supporting electrolytes. The system provides a durable catalytic surface which allows the voltammetric oxidation of methanol; in 0.5 M H₂SO₄+0.5 M K₂SO₄ electrolyte the resulting anodic peak is at 1.01 V (vs. SCE). Electrooxidation was not possible at bare carbon electrodes, at least before the onset of the electrolyte decomposition.