尖晶石型高熵氧化物的制备和电化学性能

采用溶液燃烧法制备了化学组成均一的尖晶石型(Cr_0.2Fe_0.2Mn_0.2Ni_0.2M_0.2)₃O₄(M=Co, Zn, Mg)高熵氧化物(HEOs)纳米晶粉体,并将3种高熵氧化物用作锂离子电池负极材料,研究了活性过渡金属Co和Zn阳离子与非活性Mg阳离子对电化学性能的影响.结果表明,由于具有高构型熵稳定的晶体结构, 3种高熵氧化物均表现出优异的循环稳定性,其中含有非活性Mg离子的高熵氧化物(Cr_0.2Fe_0.2Mn_0.2Ni_0.2Mg_0.2)₃O₄不仅具有更高的初始比容量(1300 mA·h/g)和倍率性能(在3 A/g电流密度下比容量约为450 mA·h/g),且在循环500次后Li+的扩散系数为其它2种高熵氧化物的3倍以上.(Cr_0.2Fe_0.2...     

100例皮肤病患者发样微量元素的检测及多因素分析

对100例皮肤病患者发样中的Zn、Cu、Fe、Ca及Mg五种元素进行了检测，采用主成分分析及因子分析法对分析数据进行了统计学处理，探索皮肤病与该五种元素的关系，结果表明：Zn、Mg元素水平是皮肤病的重要样本特征，其中Mg元素是皮肤病的一个重要影响因子。其水平偏高及偏低者占病例数的92％；Cu、Fe元素水平基本正常；缺Zn影响则不是主要因素，低Zn者只占8％。可将皮肤病分为两大类：(1)Zn、Mg元素水平偏高类；占病例数的58％。(2)Ca、Mg元素水平偏低类，占病例数的32％。     

微波等离子体发射光谱法测定乳及乳制品中的11种元素

本文采用微波灰化技术处理乳及乳制品试样,利用微波等离子体发射光谱法(MP-OES)测定乳及乳制品中K、Ca、Na、Mg、Fe、Zn、Mn、Cu、Ba、Cr、P 11种矿物质元素.实验对样品前处理条件和仪器工作参数进行了优化.结果表明,K、Ca、Na、Mg、Fe、Zn元素的线性范围为0.2～3.0μg/mL,Mn、Cu、...     

Comparison of Six Trace Elements Content in Two Genuine Medicines of Notopterygium Incisum and Aconitum pendulum in Qinghai plateau

为研究青海高原道地药材羌活和铁棒锤的特性,采用电热板消解法处理样品,原子吸收分光光度法测定了两种药材中Ca、Mg、Cu、Zn、Fe、Mn 6种金属元素的含量.结果表明,Ca、Mg、Cu、Zn、Fe、Mn 6种微量元素含量在两种道地药材中,含量最高的是Ca,平均值分别为(55.78±12.10) mg/g和(26.48±5.79) mg/g;含量最低的元素为Cu,其值分别为(0.28±0.28)mg/g和(0.09±0.06) mg/g;其它元素含量从高到低依次为Mg,Fe,Zn,Mn.可见不同地区的羌活其微量元素的含量有明显的差异,且羌活微量元素含量也存在种间差异,细叶羌活的Ca、Mg元素含量比宽叶羌活的要低,相反,Fe,Cu,Zn 3种元素含量细叶羌活的比宽叶的要高.     

青海高原道地药材羌活和铁棒锤微量元素含量比较研究

为研究青海高原道地药材羌活和铁棒锤的特性,采用电热板消解法处理样品,原子吸收分光光度法测定了两种药材中Ca、Mg、Cu、Zn、Fe、Mn 6种金属元素的含量。结果表明,Ca、Mg、Cu、Zn、Fe、Mn 6种微量元素含量在两种道地药材中,含量最高的是Ca,平均值分别为(55.78±12.10)mg/g和(26.48±5.79)mg/g;含量最低的元素为Cu,其值分别为(0.28±0.28)mg/g和(0.09±0.06)mg/g;其它元素含量从高到低依次为Mg,Fe,Zn,Mn。可见不同地区的羌活其微量元素的含量有明显的差异,且羌活微量元素含量也存在种间差异,细叶羌活的Ca、Mg元素含量比宽叶羌活的要低,相反,Fe,Cu,Zn 3种元素含量细叶羌活的比宽叶的要高。     

竹红菌乙素镁、锌配位聚合物的光物理和光生物性质

竹红菌乙素(HB)能与Mg2+和Zn2+形成重复单元数为5-20的配位聚合物(Mg2+-HB,Zn2+-HB),利用紫外-可见(UV-Vis)吸收光谱,傅里叶变换红外(FTIR)光谱,核磁共振氢谱(1H NMR)对其进行了表征.Mg2+-HB和Zn2+-HB的单重态氧量子产率分别为HB的1.2倍和0.42倍.瞬态吸收实验表明:氧气能够猝灭Mg2+-HB和Zn2+-HB的三重态,其效率可超过96％.系间窜越效率(φT)和将能量传递给氧气并能产生单重态氧的三重态光敏剂的比例(fT△)对HB及其金属配合物的单重态氧量子产率有较大影响.电子自旋共振(EPR)实验结果表明:Mg2+-HB和Zn2+-HB产生半醌负离子自由基的能力较弱,进而降低了Mg2+-HB和Zn2+-HB光敏产生超氧负离子自由基的能力.紫外-可见吸收光谱与小牛胸腺脱氧核糖核酸(CT DNA)熔链温度实验表明:Mg2+-HB和Zn2+-HB可通过静电作用与DNA结合.有氧条件下,Mg2+-HB,HB和Zn2+-HB对小牛胸腺DNA的光敏损伤效率分别为32％,25％和22％.活性氧猝灭实验表明Mg2+-HB主要通过单重态氧光敏损伤DNA.     

凹面光栅整体组合狭缝五通道原子吸收式血液五元素分析仪的研制

自行研制了一种凹面光栅整体组合狭缝五通道原子吸收式血液五元素分析仪,用于人全血中5种元素Ca,Cu,Mg,Fe和Zn的测定.采用1支五元素空心阴极灯作为光源,以单反射方式聚焦在火焰中心,以凹面光栅为色散元件.设计了五元素锐线通过的整体组合狭缝.采用顺序注射变速恒流在线稀释的溶液注入方式.为消除干扰谱线对钙的原子吸收的影...     

梯型多孔g-C3N4/Zn0.2Cd0.8S-DETA复合材料的合成及其高效稳定光催化产氢性能（英文）

近年来,化石燃料燃烧导致的环境污染问题和能源危机越来越严重.在众多解决方案中,光催化产氢由于其可持续性以及无污染等特点而受到广泛关注.然而,由于许多半导体光催化剂性能不理想,光催化水分解研究进程缓慢.本研究采用水热法成功制备了梯型Pg-C3N4/Zn0.2Cd0.8S-DETA复合材料用于光催化产氢.DETA(二亚乙基三胺)作为一种有机分子插入在Zn0.2Cd0.8S的层中构成有机-无机杂化材料.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射光谱(UV-vis)以及光电流研究了所制备样品的结构、形貌、元素组成以及光电特征,并提出了可能的光催化机制.XRD和XPS结果表明Pg-C3N4和Zn0.2Cd0.8S-DETA复合在一起而不是机械混合.通过TEM可以看出Pg-C3N4是一种带有很多孔洞的纳米片,而Zn0.2Cd0.8S-DETA类似于纳米花瓣,在Pg-C3N4/Zn0.2Cd0.8S-DETA复合材料中Pg-C3N4表面充满了Zn0.2Cd0.8S-DETA纳米花瓣.经过元素分析得知所合成的复合材料没有杂质元素.UV-vis表明Pg-C3N4和Zn0.2Cd0.8S-DETA具有良好的吸收带边以及带隙,分别为2.83 eV和2.48 eV.光电流和PL显示15%Pg-C3N4/Zn0.2Cd0.8S-DETA具有很高的载流子分离及传输效率.光催化性能测试显示15%Pg-C3N4/Zn0.2Cd0.8S-DETA具有很好的产氢活性,为6.69 mmol g^-1 h^-1,分别是Pg-C3N4和Zn0.2Cd0.8S-DETA的16.73和1.44倍.在经过七次循环实验后15%Pg-C3N4/Zn0.2Cd0.8S-DETA仍保持很优异的活性,说明它具有很好的稳定性.通过高分辨XPS中各元素结合能的变化可以看出构成异质结之后电子的流向,从而看出光催化可能的机制为梯形.光照射之后,Pg-C3N4和Zn0.2Cd0.8S-DETA中产生电子-空穴对,电子迁移到导带并在价带留下空穴.当Pg-C3N4与Zn0.2Cd0.8S-DETA复合之后,在它们的接触处会形成内部电场,Zn0.2Cd0.8S-DETA导带上的电子和Pg-C3N4价带上的空穴会在内部电场作用下复合.Zn0.2Cd0.8S-DETA价带上的空穴和Pg-C3N4上的电子分别参与氧化还原反应.梯形机制促使电子和空穴在空间上分离,从而具有强氧化还原性.梯形异质结的形成加快了15%Pg-C3N4/Zn0.2Cd0.8S-DETA复合材料中电子-空穴对的分离效率,并减少了电子-空穴对的复合,从而使其具有很优异的光催化性能和稳定性.     

Determination of Seven Metal Elements in Gannan Wild by AAS

为开发和利用赣南野生草菇提供科学依据,采用原子吸收光谱法测定了其中Zn、Co、Ni、Cu、Fe、Cr和Mg 7种金属元素的含量.结果表明,草菇中Zn、Co、Ni、Fe、Cr和Mg含量丰富,Cu含量较低,Zn与Cu值为7.4,与抗癌中药中微元素的含量有Zn高Cu低的关系相同,说明赣南野生草菇有较高的营养价值.     

电感耦合等离子体原子发射光谱法(ICP-AES)测定金鸡胶囊中的7种无机元素

建立了测定金鸡胶囊中Ca、Mg、Mn、Fe、Cu、Zn和Sr 7种无机元素含量的分析方法.采用浓硝酸和高氯酸(8+2)的混合酸溶解样品,利用电感耦合等离子体原子发射光谱法(ICP-AES)对各种元素进行测定.金鸡胶囊含有丰富的对人体有益的无机元素,对待测样品的测定结果表明,Ca、Mg、Fe、Mn、Zn、Sr和Cu的含量...     

Random Occupation of Multimetal Sites in Transition Metal-Organic Frameworks for Boosting the Oxygen Evolution Reaction

Developing robust oxygen evolution reaction (OER) electrocatalysts with excellent performance is essential for the conversion of renewable electricity to clean fuel. Herein, we present a facile concept for the synthesis of efficient high-entropy metal-organic frameworks (HEMOFs) as electrocatalysts in a one-step solvothermal synthesis. This strategy allows control of the microstructure and corresponding lattice distortion by tuning the metal ion composition. As a result, the OER activity was improved by optimizing the coordination environment of the metal catalytic center. The optimized Co-rich HEMOFs exhibited a low overpotential of 310 mV at a current density of 10 mA cm⁻², better than a RuO₂ catalyst tested under the same conditions. The finding of lattice distortion of the HEMOFs provides a new strategy for developing high-performance electrocatalysts for energy conversion.     

Strong‐Coupled Cobalt Borate Nanosheets/Graphene Hybrid as Electrocatalyst for Water Oxidation Under Both Alkaline and Neutral Conditions

Developing highly active catalysts for the oxygen evolution reaction (OER) is of paramount importance for designing various renewable energy storage and conversion devices. Herein, we report the synthesis of a category of Co‐Pi analogue, namely cobalt‐based borate (Co‐B_i) ultrathin nanosheets/graphene hybrid by a room‐temperature synthesis approach. Benefiting from the high surface active sites exposure yield, enhanced electron transfer capacity, and strong synergetic coupled effect, this Co‐B_i NS/G hybrid shows high catalytic activity with current density of 10 mA cm^?2 at overpotential of 290 mV and Tafel slope of 53 mV dec^?1 in alkaline medium. Moreover, Co‐B_i NS/G electrocatalysts also exhibit promising performance under neutral conditions, with a low onset potential of 235 mV and high current density of 14.4 mA cm^?2 at 1.8 V, which is the best OER performance among well‐developed Co‐based OER electrocatalysts to date. Our finding paves a way to develop highly active OER electrocatalysts.     

Nickel-iron borate coated nickel-iron boride hybrid for highly stable and active oxygen evolution electrocatalysis

The development of efficient and cost-effective electrocatalysts toward anodic oxygen evolution reaction (OER) is crucial for the commercial application of electrochemical water splitting. As the most promising electrocatalysts, the OER performances of nickel-iron-based materials can be further improved by introducing metalloid elements to modify their electron structures. Herein, we developed an efficient hybrid electrocatalyst with nickel-iron boride (NiFeB) as core and amorphous nickel-iron borate (NiFeB_i) as shell (NiFeB@NiFeB_i) via a simple aqueous reduction. The obtained NiFeB@NiFeB_i exhibits a small overpotential of 237 mV at 10 mA/cm² and Tafel slope of 57.65 mV/dec in 1.0 mol/L KOH, outperforming most of the documented precious-metal-free based electrocatalysts. Benefiting from the in situ formed amorphous NiFeBi layer, it shows excellent stability toward the oxygen evolution reaction (OER). These findings might provide a new way to design advanced precious-metal-free electrocatalysts for OER and the application of electrochemical water splitting.     

CoP nanoparticles embedded in P and N co-doped carbon as efficient bifunctional electrocatalyst for water splitting

Noble-metal-free hydrogen/oxygen evolution reaction(HER/OER) electrocatalysts, especially bifunctional electrocatalysts, are essential for overall water splitting, but their performance is impeded by many factors like poor electrical conductivity. Herein, we fabricated cobalt phosphide(Co P) nanoparticles embedded in P and N co-doped carbon(PNC) matrix(Co P@PNC) to fully realize the high activity of Co P by maximizing its conductivity. Simply a carbonization coupled phosphidation approach was utilized where Co ions and organic ligands of Co-MOF were transferred into Co P and P and N co-doped carbon. The synthesized material shows an ideal electrical conductivity, excellent HER(overpotential of-84 m V and-120 m V @10 m A cm~(-2) in acidic and alkaline medias, respectively) and OER(overpotential of 330 m V@10 m A cm~(-2) in alkaline media) performances. Further, Co P@PNC acts as a superior catalyst for both anode and cathode to catalyze overall water splitting and only requires an voltage of 1.52 V to deliver a current density of 10 m A cm~(-2), superior to the noble-metal catalysts system(Pt/C//IrO_2) and the reported noble-metal-free bifunctional electrocatalysts.     

Electropolymerization of cobalt porphyrins and corroles for the oxygen evolution reaction

Developing large-scale electrocatalysts using molecular complexes for the oxygen evolution reaction (OER) is of great importance. Herein, four cobalt porphyrins and corroles are deposited on electrode substrates using a simple and fast electropolymerization method. Our results showed that Co-1-P@CC, formed by electropolymerizing Co tetrakis(p-N-pyrrolylphenyl)porphyrin (Co-1-P) on carbon cloth (CC), is the most active OER catalyst in the examined Co porphyrins and corroles in alkaline aqueous solutions by displaying an onset overpotential of 380 mV. Long-term electrolysis tests confirmed the stability of these electropolymerized films by functioning as OER electrocatalysts.     

FeOOH/Co/FeOOH Hybrid Nanotube Arrays as High‐Performance Electrocatalysts for the Oxygen Evolution Reaction

Herein, we developed FeOOH/Co/FeOOH hybrid nanotube arrays (HNTAs) supported on Ni foams for oxygen evolution reaction (OER). The inner Co metal cores serve as highly conductive layers to provide reliable electronic transmission, and can overcome the poor electrical conductivity of FeOOH efficiently. DFT calculations demonstrate the strong electronic interactions between Co and FeOOH in the FeOOH/Co/FeOOH HNTAs, and the hybrid structure can lower the energy barriers of intermediates and thus promote the catalytic reactions. The FeOOH/Co/FeOOH HNTAs exhibit high electrocatalytic performance for OER, such as low onset potential, small Tafel slope, and excellent long‐term durability, and they are promising electrocatalysts for OER in alkaline solution.     

Designed preparation of CoS/Co/MoC nanoparticles incorporated in N and S dual-doped porous carbon nanofibers for high-performance Zn-air batteries

The development of low-cost and highly efficient bifunctional electrocatalysts toward oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) is of critical importance for clean energy devices such as fuel cells and metal-air batteries.Herein,a sophisticated na nostructure composed of CoS,Co and MoC nanoparticles incorporated in N and S dual-doped porous carbon nanofibers(CoS/Co/MoC-N,SPCNFs) as a high-efficiency bifunctional electrocatalyst is designed and synthesized via an efficient multistep strategy.The as-prepared CoS/Co/MoC-N,S-PCNFs exhibit a positive half-wave potential(E_(1/2)) of0.871 V for ORR and a low overpotential of 289 mV at 10 mA/cm~2 for OER,outperforming the non-noble metal-based catalysts reported.Furthermore,the assembled Zn-air battery based on CoS/Co/MoC-N,SPCNFs delivers an excellent power density(169.1 mW/cm~2),a large specific capacity(819.3 mAh/g) and robust durability,demonstrating the great potential of the as-developed bifunctional electrocatalyst in practical applications.This work is expected to inspire the design of advanced bifunctional nonprecious metal-based electrocatalysts for energy storage.     

过渡金属电催化剂在硅基光阳极分解水产氧中的作用

光电化学分解水可将太阳能转换为绿色的氢能,为目前的能源危机和环境问题提供了一种理想的解决方案.在分解水反应中,涉及四空穴过程的产氧半反应是制约性能的关键步骤,往往需要在半导体表面沉积电催化剂以加速产氧反应动力学.因此,全面理解电催化剂在光电化学分解水体系中的作用至关重要.在目前的产氧电催化剂中,过渡金属羟基氧化物电催化剂(MOOH,M=Fe,Co,Ni)因其环保、廉价、高效以及稳定的特性,已被广泛用于半导体光阳极分解水器件中.而且,MOOH可用简单的电沉积方法沉积在光电极表面,易于大面积制备.然而,电沉积法制备的MOOH具有复杂的结构,对其作用机制的全面理解更加困难.因此,本文以电沉积MOOH修饰的硅基光阳极(n⁺p-Si/SiO_x/Fe/FeOx/MOOH)作为模型,研究了不同电催化剂对硅光阳极光电化学产氧性能的影响.实验发现电催化剂的界面优化在电催化剂修饰的光电极中发挥着重要作用,这是因为优化的界面可以提升界面电荷传输,提供更多的催化反应活性位点以及更高的本征催化活性,从而更有利于光解水性能的提升.该项研究揭示了电催化剂在光解水器件中的作用,并为今后高效光解水器件的设计提供了一定指导.首先在多晶n⁺p-Si基底上热蒸镀了一层30 nm的金属Fe膜,并通过电化学活化将Fe膜表面转换为FeOx得到Fe/FeOx(记作aFe)界面层,然后利用电沉积方法制备MOOH表面修饰层,最终得到n⁺p-Si/SiO_x/aFe:MOOH光阳极.X射线光电子能谱、拉曼光谱以及扫描电子显微镜表面元素成像的表征结果均证实电极表面由于界面层金属Fe元素的掺杂而形成了Fe1-xNixOOH.在模拟太阳光下用于光解水产氧时,n⁺p-Si/SiO_x/aFe:NiOOH电极的起始电位为~1.01 VRHE(相对于可逆氢电极的电势),在1.23 VRHE下的光电流为38.82 mA cm^-2,显著优于n⁺p-Si/SiO_x/aFe、n⁺p-Si/SiO_x/aFe:FeOOH以及n⁺p-Si/SiO_x/aFe:CoOOH三个对比样品,且其稳定性达到75 h.另外,我们发现n⁺p-Si/SiO_x/aFe:MOOH电极的光电化学产氧性能均显著高于n⁺p-Si/SiO_x/aFe电极,且p++-Si/SiO_x/aFe:MOOH的电催化产氧性能也高于p++-Si/SiO_x/MOOH,不仅证明了aFe界面层对Si与MOOH层之间的界面接触作用的有效调控,而且表明双电催化剂体系(aFe:MOOH)的电催化产氧活性高于单电催化剂(MOOH).热力学分析表明,n⁺p-Si/SiO_x/aFe:MOOH光阳极的光电压大小与其光解水产氧性能并不一致,从而排除了热力学因素对性能的关键影响.进一步从塔菲尔斜率、电化学活性表面积和电化学阻抗谱对各电极的动力学进行了分析,证明了动力学因素在上述光阳极产氧性能中的主导作用.同时发现,由于aFe:NiOOH双电催化剂具有更高的本征电催化产氧性能,提供了更多的表面活性位点以及更有效地促进了光生载流子的传输,对动力学的提升效果更显著,从而使n⁺p-Si/SiO_x/aFe:NiOOH光阳极表现出最高的光解水产氧性能.     

Metallic Co4N Porous Nanowire Arrays Activated by Surface Oxidation as Electrocatalysts for the Oxygen Evolution Reaction

Designing highly efficient electrocatalysts for oxygen evolution reaction (OER) plays a key role in the development of various renewable energy storage and conversion devices. In this work, we developed metallic Co₄N porous nanowire arrays directly grown on flexible substrates as highly active OER electrocatalysts for the first time. Benefiting from the collaborative advantages of metallic character, 1D porous nanowire arrays, and unique 3D electrode configuration, surface oxidation activated Co₄N porous nanowire arrays/carbon cloth achieved an extremely small overpotential of 257 mV at a current density of 10 mA cm⁻², and a low Tafel slope of 44 mV dec⁻¹ in an alkaline medium, which is the best OER performance among reported Co‐based electrocatalysts to date. Moreover, in‐depth mechanistic investigations demonstrate the active phases are the metallic Co₄N core inside with a thin cobalt oxides/hydroxides shell during the OER process. Our finding introduces a new concept to explore the design of high‐efficiency OER electrocatalysts.