水相光引发聚合诱导自组装制备CO_2响应性聚合物囊泡

本文以聚甲基丙烯酸甘油酯(PGMA)作为大分子RAFT试剂,甲基丙烯酸羟丙酯(HPMA)和甲基丙烯酸-2-(二甲氨基)乙酯(DMAEMA)作为单体,在室温下通过水相光引发聚合诱导自组装制备CO2响应聚合物囊泡。动力学研究表明聚合在可见光(405nm,0.5 mW/cm2)照射10min后,转化率可以达到100%。文中还探讨了DMAEMA对于聚合反应的影响。通过视觉观察、透射电子显微镜(TEM)以及核磁共振(NMR)对聚合物囊泡的二氧化碳响应特性进行了研究。     

Structure and Molecular Recognition of Chiral Amino-Cyclodextrin: One-dimensional Array by Self-assembly in Solid and Chiral Discrimination in Solution

Abstract

The crystal structure and molecular recognition behaviour of a new chiral-amino cyclodextrin are reported; van der Waals interaction, hydrogen bond and the electrostatic interactions play an important role in the self-assembling process and chiral recognition for (R)-(-)-and (S)-(+)-mandelic acid.     

Construction of Supramolecular Chirality in Polymer Systems:Chiral Induction,Transfer and Application

Chirality, commonly found in organisms, biomolecules and nature such as L-amino acids and D-sugars, has been extensively studied in chemistry and biomedical science. Hence, the demand for simple and efficient construction of chiral structures, especially chiral polymers, has been rapidly growing due to their potential applications in chemosensors, asymmetric catalysis and biological materials. However, most chiral polymers reported are prepared directly from chiral monomers/chiral catalysts, the...     

A Chiral Recognition System Orchestrated by Self‐Assembly: Molecular Chirality,Self‐Assembly Morphology,and Fluorescence Response

The newly developed oligophenylenevinylene (OPV)‐based fluorescent (FL) chiral chemosensor (OPV‐Me) for the representative enantiomeric guest, 1,2‐cyclohexanedicarboxylic acid (1,2‐CHDA: RR ‐ and SS ‐form) showed the high chiral discrimination ability, resulting in the different aggregation modes of OPV‐Me self‐assembly: RR ‐CHDA directed the fibrous supramolecular aggregate, whereas SS ‐CHDA directed the finite aggregate. The consequent FL intensity toward RR ‐CHDA was up to 30 times larger than that toward SS ‐CHDA. Accordingly, highly enantioselective recognition was achieved. Application to the chirality sensing was also possible: OPV‐Me exhibited a linear relationship between the FL intensity and the enantiomeric excess through the morphological development of stereocomplex aggregates. These results clearly show that the chiral recognition ability is manifested by the amplification cascade of the chirality difference through self‐assembly.     

Cesium Recognition by Supramolecular Assemblies of 2-Benzylphenol and 2-Benzylphenolate

Extraction experiments show that 2-benzylphenol is an efficient and selective extractant for cesium. The structures of cesium and potassium 2-benzylphenolate were determined. Both structures also contain 2-benzylphenol, which ligates the cation, through its phenolic oxygen atom and the benzyl ring. The phenolate oxygen atom does not directly contact the cation in either structure, but is a hydrogen-bond acceptor to the 2-benzylphenol ligands, forming a supramolecular assembly. For comparison to the bound ligands, the structure of 2-benzylphenol was also determined. Molecular mechanics and ab initio molecular orbital theory are used to rationalize several aspects of Cs/Na selectivity.     

Chirality Control by Substituents in the Asymmetric Addition of Et_2Zn to Aromatic Aldehydes Catalyzed by cis-(1 R,2S)-2- Benzamidocyclohexanecarboxylic Acid Derived 1,3-Aminoalcohols

A series of novel optically active 1,3‐aminoalcohols based on cis‐(1R,2S)‐2‐benzamidocyclohexanecarboxylic acid and trans‐(1R,2R)‐2‐benzamidocyclohexanecarboxylic acid were synthesized and used in the asymmetric diethylzinc addition to aromatic aldehydes. Not only the enantioselectivity but also the stereochemistry of the product were controlled by the N‐substituents and the substituents on the vicinity carbon to hydroxyl group of the cis‐derivatives.     

色谱法同时测定羰化反应尾气中的O2、CO、CO2

提出用特制活性炭填充柱分离,热导检测器检测,以外标法定量,同时测定O2、CO、CO2.探讨了该方法的校正因子、各组分的线性相关性及微量氧气的分离和定量等.在选定的色谱条件下,O2与CO的分离度达1.7,各组分的相对标准偏差＜0.18%,绝对误差＜0.04%.     

酶催化拆分制备手性2-氯-1-(2,4-二氟苯基)乙醇及 光学活性抗真菌药物的合成

用Pseudomonas stutzeri脂肪酶催化转酯化反应动力学拆分外消旋体法制备高对映体纯的手性2-氯-1-(2,4-二氟苯基)乙醇, 得到95.8% ee值的(R)-异构体和94.5% ee值的(S)-异构体, 以此手性醇为关键中间体合成了4种具有抗真菌活性的光学活性化合物α-氯代苄氧基-β-(1-咪唑基)-2,4-二氟乙苯硝酸盐. 纸片扩散法测试体外抗真菌活性结果表明, 对各种念珠菌(Candida species) (R)-5a和(R)-5b具有与氟康唑相当的抗菌活性, 特别是对氟康唑耐药的烟曲霉菌(Aspergillus fumigatus), 5a, 5b及其两种光学活性异构体均有优异的抗菌活性, 而且(R)-异构体的活性明显高于(S)-异构体和外消旋体.     

Photocatalytic Reduction of CO2 to HCOOH and CO by a Phosphine-Bipyridine-Phosphine Ir(III) Catalyst: Photophysics,Nonadiabatic Effects,Mechanism, and Selectivity

Photocatalytic CO₂ reduction is one of the best solutions to solve the global energy crisis and to realize carbon neutralization. The tetradentate phosphine-bipyridine (bpy)-phosphine (PNNP)-type Ir(III) photocatalyst, Mes-IrPCY2, was reported with a high HCOOH selectivity but the photocatalytic mechanism remains elusive. Herein, we employ electronic structure methods in combination with radiative, nonradiative, and electron transfer rate calculations, to explore the entire photocatalytic cycle to either HCOOH or CO, based on which a new mechanistic scenario is proposed. The catalytic reduction reaction starts from the generation of the precursor metal-to-ligand charge transfer (³MLCT) state. Subsequently, the divergence happens from the ³MLCT state, the single electron transfer (SET) and deprotonation process lead to the formation of one-electron-reduced species and Ir(I) species, which initiate the reduction reaction to HCOOH and CO, respectively. Interestingly, the efficient occurrence of proton or electron transfer reduces barriers of critical steps. In addition, nonadiabatic transitions play a nonnegligible role in the cycle. We suggest a lower free-energy barrier in the reaction-limiting step and the very efficient SET in ³MLCT are cooperatively responsible for a high HCOOH selectivity. The gained mechanistic insights could help chemists to understand, regulate, and design photocatalytic CO₂ reduction reaction of similar function-integrated molecular photocatalyst.     

草酸盐热分解法制备CeO_2负载CuO催化剂用于CO优先氧化反应

采用草酸盐热分解-浸渍法制备了一系列不同CuO负载量的CuO/CeO_2催化剂,并将其用于CO优先氧化(PROX)研究.当CuO负载量为10%时催化剂活性最高,具有温区最宽且温度最低的CO完全转化窗口(96~160℃),并且当反应温度低于131℃时,产物中CO2选择性始终保持100%.研究结果表明,当负载少量CuO时,Cu~(2+)离子会进入CeO_2晶格形成固溶体;进一步提高CuO负载量会导致CuO在CeO_2表面聚集.对于CuO/CeO_2催化剂,形成Cu-Ce固溶体会在催化剂表面生成大量的表面氧空位和Ce3+;Ce3+则与Cu~(2+)作用产生更多的表面Cu~+,而Cu~+是CO PROX的活性中心,因此表面Ce3+含量的提高和Cu-Ce之间相互作用的增强是活性提高的主要原因.与普通沉淀-浸渍法制备的CuO/CeO_2催化剂相比,草酸盐热分解-浸渍法制备的催化剂更有利于Cu-Ce固溶体的形成,从而具有更多的表面Ce3+和更强的表面Cu-Ce相互作用,因此具有更高的CO优先氧化活性.     

Capture of CO2 by a Cationic Nickel(I) Complex in the Gas Phase and Characterization of the Bound,Activated CO2 Molecule by Cryogenic Ion Vibrational Predissociation Spectroscopy

We describe a systematic method for the preparation and spectroscopic characterization of a CO₂ molecule coordinated to an activated bisphenoidal nickel(I) compound containing a tetraazamacrocyclic ligand in the gas phase. The resulting complex was then structurally characterized by using mass‐selected vibrational predissociation spectroscopy. The results indicate that a highly distorted CO₂ molecule is bound to the metal center in an η²‐C,O coordination mode, thus establishing an efficient and rational method for the preparation of metal‐activated CO₂ for further studies using ion chemistry techniques.     

Two Keggin Templated Supramolecular Compounds by Exerting the Chelate and Linking Dual Roles of the Ligand 2, 2′‐Biimidazole

Two new Keggin templated supramolecular compounds, [Zn₂(H₂biim)₅(SiM₁₂O₄₀)] · 4H₂O [M = W ( 1 ), Mo ( 2 )] (H₂biim = 2, 2′‐biimidazole), were synthesized under hydrothermal conditions by using the ligand 2, 2′‐biimidazole. They were characterized by single‐crystal X‐ray diffraction, elemental analyses, IR and photoluminescence spectroscopy as well as cyclic voltammetry. The two isostructural compounds are constructed by two discrete supramolecular moieties: the inorganic chains consist of Keggin anions and metal‐organic chains constructed by [Zn₂(H₂biim)₅]⁴⁺ subunits. In the dinuclear [Zn₂(H₂biim)₅]⁴⁺ subunit, the H₂biim ligands exhibit a dual role, chelating and linking. The metal‐organic chains further construct a 3D supramolecular framework with channels, in which the Keggin‐based inorganic chains are accommodated. The electrochemical behaviors of compounds 1 and 2 bulk‐modified carbon paste electrodes ( 1 ‐CPE, 2 ‐CPE) were studied.     

自组装超薄膜修饰Ta2O5介质膜及其特性研究

采用静电自组装方法在五氧化二钽(Ta2O5)介质氧化膜上制备了聚二烯丙基二甲基氯化铵(PDDA)/聚苯乙烯磺酸钠(PSS)和聚二烯丙基二甲基氯化铵/聚-3,4-乙烯二氧噻吩-聚苯乙烯磺酸钠(PEDOT-PSS)超薄膜.研究了两种自组装超薄膜在Ta2O5介质氧化薄膜上的组装特性.结果表明两种自组装膜能够稳定地组装于Ta2O5介质膜表面,并有效降低薄膜的表面粗糙度.进一步研究了两种自组装超薄膜修饰的Ta2O5电容结构的电性能.结果表明静电自组装膜对Ta2O5介质膜表面进行修饰后,有效地隔离了介质氧化膜中的缺陷,降低了电容的漏电流并提高耐电压能力;研究还发现不同厚度的超薄膜对Ta2O5电容结构的耐压特性有不同程度的影响,较厚的薄膜可以更好地提高电容的耐压能力并降低漏电流,但会增加电容的等效串联电阻(ESR).另外,在相同薄膜层数的情况下,聚合物电解质PEDOT-PSS良好的导电性能降低了复合超薄膜的电阻,使得PDDA/PEDOT-PSS修饰的电容结构ESR值较低.     

Capture of CO2 by a Cationic Nickel(I) Complex in the Gas Phase and Characterization of the Bound,Activated CO2 Molecule by Cryogenic Ion Vibrational Predissociation Spectroscopy

We describe a systematic method for the preparation and spectroscopic characterization of a CO₂ molecule coordinated to an activated bisphenoidal nickel(I) compound containing a tetraazamacrocyclic ligand in the gas phase. The resulting complex was then structurally characterized by using mass‐selected vibrational predissociation spectroscopy. The results indicate that a highly distorted CO₂ molecule is bound to the metal center in an η²‐C,O coordination mode, thus establishing an efficient and rational method for the preparation of metal‐activated CO₂ for further studies using ion chemistry techniques.     

两亲性六臂星型端氨基PEG-PLGA的合成、表征及胶束化行为

采用本体开环聚合法,以乙交酯(GA)和DL-丙交酯(DLA)为原料,肌醇为引发剂,合成了一系列不同分子量的六臂星型聚乳酸聚乙醇酸(PLGA)(6-s-PLGA50,6-s-PLGA100,6-s-PLGA200,其中50,100,200为原料与引发剂的摩尔比),采用羧基化反应对其端基进行羧化处理.以聚乙二醇4000(PEG4000)为原料用对甲苯磺酰化法得到sTO-PEG-OTs,再进行氨解得到双端氨基PEG(H2N-PEG-NH2).末端羧基6-s-PLGAx通过N-环己基碳二亚胺(DCC)缩合反应与双端氨基PEG连接得到两亲性星型六臂结构的聚合物(6-s-PLGAx-PEG-NH2).分别用核磁共振氢谱法(1H NMR)、凝胶排阻色谱法(GPC)及差示热量热分析法(DSC)等手段对6-s-PLGAx和6-s-PLGAx-PEG-NH2进行了表征.以6-s-PLGA100-PEG-NH2聚合物为例,自组装得到空白的纳米粒子,并用透射电子显微镜法(TEM)和动态光散射法(DLS)考察了粒子的表面形态以及粒径分布特征,用1H NMR分析了胶束的"核-壳"结构.用噻唑蓝四氮唑溴化物(MTT)比色法探讨了该两亲性材料的体外细胞毒性.研究结果表明,合成了不同分子量的两亲性六臂星型端氨基PEG-PLGA,该两亲性聚合物可自组装形成纳米胶束,粒径范围在40～60 nm,与PLGA相比体外细胞毒性无显著性差异.     

Origin of Thermal and Hyperthermal CO2 from CO Oxidation on Pt Surfaces: The Role of Post‐Transition‐State Dynamics,Active Sites,and Chemisorbed CO2

The post‐transition‐state dynamics in CO oxidation on Pt surfaces are investigated using DFT‐based ab initio molecular dynamics simulations. While the initial CO₂ formed on a terrace site on Pt(111) desorbs directly, it is temporarily trapped in a chemisorption well on a Pt(332) step site. These two reaction channels thus produce CO₂ with hyperthermal and thermal velocities with drastically different angular distributions, in agreement with recent experiments (Nature, 2018 , 558, 280–283). The chemisorbed CO₂ is formed by electron transfer from the metal to the adsorbate, resulting in a bent geometry. While chemisorbed CO₂ on Pt(111) is unstable, it is stable by 0.2 eV on a Pt(332) step site. This helps explain why newly formed CO₂ produced at step sites desorbs with far lower translational energies than those formed at terraces. This work shows that steps and other defects could be potentially important in finding optimal conditions for the chemical activation and dissociation of CO₂.     

Highly Selective and Stable Reduction of CO2 to CO by a Graphitic Carbon Nitride/Carbon Nanotube Composite Electrocatalyst

A stable and selective electrocatalyst for CO₂ reduction was fabricated by covalently attaching graphitic carbon nitride onto multiwall carbon nanotubes (g‐C₃N₄/MWCNTs). The as‐prepared composite is able to reduce CO₂ exclusively to CO with a maximum Faraday efficiency of 60 %, and no decay in the catalytic activity was observed even after 50 h of reaction. The enhanced catalytic activity towards CO₂ reduction is attributed to the formation of active carbon–nitrogen bonds, high specific surface area, and improved material conductivity of the g‐C₃N₄/MWCNT composite.     

微乳法制备Au/Al2 O3 催化剂及其催化氧化CO性能的研究

用Tx-100／正己醇／环己烷／水的W／O微乳体系,合成了一系列Au／Al2O3催化剂。考察了焙烧温度、沉淀剂种类、搅拌方式等对Au／Al2O3,催化氧化CO活性的影响。结果表明：以氨水为沉淀剂,机械搅拌,600℃焙烧制得的Au／Al2O3,显示出较好的CO氧化性能。当反应温度为100℃时,CO转化率达85．0％,240℃时转化率达96．0％。XRD,DTA,TPR和TEM等表征表明：低温焙烧的催化剂,大部分载体Al2O3为无定型,对催化活性不利;焙烧温度过高,可能造成金微粒的团聚烧结,使其活性下降;由较强烈的搅拌方式制得的Au／Al2O3经适宜温度焙烧,可获得金粒尺寸较小、CO催化氧化活性较高的Au／γ-Al2O3催化剂。