首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Layered double hydroxides (LDHs) have shown great promise as anion getters. In this paper, we demonstrate that the sorption capability of a LDH for a specific oxyanion can be greatly increased by appropriately manipulating material composition and structure. We have synthesized a large set of LDH materials with various combinations of metal cations, interlayer anions, and molar ratios of divalent cation M(II) to trivalent cation M(III). The synthesized materials have then been tested systematically for their sorption capabilities for pertechnetate (TcO(-)(4)). It is discovered that for a given interlayer anion (either CO(2-)(3) or NO(-)(3)) the Ni-Al LDH with a Ni/Al ratio of 3:1 exhibits the highest sorption capability among all the materials tested. The sorption of TcO(-)(4) on M(II)-M(III)-CO(3) LDHs may be dominated by the edge sites of LDH layers and correlated with the basal spacing d(003) of the materials, which increases with the decreasing radii of both divalent and trivalent cations. The sorption reaches its maximum when the layer spacing is just large enough for a pertechnetate anion to fit into a cage space among three adjacent octahedra of metal hydroxides at the edge. Furthermore, the sorption is found to increase with the crystallinity of the materials. For a given combination of metal cations and an interlayer anion, the best crystalline LDH material is obtained generally with a M(II)/M(III) ratio of 3:1. Synthesis with readily exchangeable nitrate as an interlayer anion greatly increases the sorption capability of a LDH material for pertechnetate. The work reported here will help to establish a general structure-property relationship for the related layered materials.  相似文献   

2.
A Mg,Al layered double hydroxide (LDH) with [Cr(C(2)O(4))(3)](3)(-) anions in the interlayer has been synthesized following two different routes: reconstruction from a mildly calcined Mg,Al-carbonate LDH, and anion exchange from a Mg,Al-nitrate LDH. The solids prepared have been characterized by elemental chemical analysis, powder X-ray diffraction, FT-IR and UV-vis/DR (diffuse reflectance) spectroscopies, thermal methods, nitrogen adsorption at -196 degrees C, and FT-IR monitoring of pyridine adsorption. The results obtained indicate that the most appropriate method is anion exchange, leading to a well crystallized LDH with an interlayer spacing of 10 A. Due to the high pH value (>8) of the solution in the reconstruction method, however, a polyphasic system is obtained, where, in addition to a phase with the LDH structure, amorphous magnesium oxalate and chromium oxohydroxides are also formed due to hydrolysis of the complex. The interlayer complex is stable up to 200 degrees C, but the layered structure is stable up to 330 degrees C, probably because of the presence of interlayer oxalate anions formed during decomposition of the complex. Calcination leads to oxidation of Cr(3+) ions to the six-valent state, which reverts to Cr(3+) when the calcination temperature is further increased.  相似文献   

3.
A chemical precursor mediated process was used to form catalyst nanoparticles (NPs) with an extremely high density (10(14) to 10(16) m(-2)), controllable size distribution (3-20 nm), and good thermal stability at high temperature (900 °C). This used metal cations deposited in layered double hydroxides (LDHs) to give metal catalyst NPs by reduction. The key was that the LDHs had their intercalated anions selected and exchanged by guest-host chemistry to prevent sintering of the metal NPs, and there was minimal sintering even at 900 °C. Metal NPs on MoO(4)(2-) intercalated Fe/Mg/Al LDH flakes were successfully used as the catalyst for the double helix growth of single-walled carbon nanotube arrays. The process provides a general method to fabricate thermally stable metal NPs catalysts with the desired size and density for catalysis and materials science.  相似文献   

4.
Layered double hydroxides (LDHs, or hydrotalcites) with Mg(2+) and Al(3+) cations in the mixed metal hydroxide layer and paratungstate anions in the interlayer have been prepared. Different methods have been followed: anion exchange with Mg,Al LDHs originally containing nitrate or adipate, reconstruction of the LDH structure from a mildly calcined Mg(2)Al-CO(3) LDH, and coprecipitation. In all cases, the tungsten precursor salt was (NH(4))(10)H(2)W(12)O(42). The prepared solids have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), FT-IR spectroscopy, thermogravimetric (TG) and differential thermal (DTA) analyses, scanning electron microscopy (SEM) with EDX (energy-dispersive X-ray analysis), and nitrogen adsorption at -196 degrees C for surface area and surface texture. Most of the synthesis methods used, especially anion exchange starting from a Mg(2)Al-NO(3) precursor at low temperature and short reaction times, lead to formation of a hydrotalcite with a gallery height of 9.8 A; increasing the reaction temperature to 70-100 degrees C and maintaining short contact times leads to a solid with a gallery height of 7.8 A. Both phases have been identified as a result of the intercalation of W(7)O(24)(6)(-) species in different orientations in the interlayer space. If the time of synthesis or the temperature is increased, a more stable phase, with a gallery height of 5.2 A corresponding to a solid with intercalated W(7)O(24)(6)(-), is formed, probably with grafting of the interlayer anion on the brucite-like layers. All systems are microporous. Calcination at 300 degrees C leads to amorphous species, and crystallized MgWO(4) is observed at 700 degrees C.  相似文献   

5.
This study presents a rare use of layered double hydroxides of Fe(II) and Al(III) (Fe-Al LDH), as reported for the first time for bromate removal from aqueous solutions. The Fe-Al LDH samples were prepared with Fe/Al molar ratios of 1-4 using a co-precipitation method at pH 7, with subsequent hydrothermal treatment at 120°C. The Fe-Al LDH (molar ratio of Fe/Al=1, 2) with a layered structure exhibited nearly complete removal of bromate from initial concentration of 100μmol/dm(3) at a wide pH range of 4.0-10.5 over a 2h reaction period; the residual bromate concentration in the solution was lower than the detection limit of 0.07μmol/dm(3) (9μg-BrO(3)(-)/dm(3)). During the reaction period, bromide was released into the solution via a reduction process. Reactivity of Fe-Al LDH with a Fe/Al molar ratio of 2 did not decrease the bromate reduction efficiency during 30days.  相似文献   

6.
构建了LDHs主客体作用模型, 采用混合密度泛函B3LYP方法, 在6-31G(d)水平上进行结构优化和频率分析, 然后分别用6-31G(d)和6-311++G(d, p)基组计算主客体相互作用能, 从几何参数、电荷布居、前线轨道、能量以及热力学参数等角度探讨LDHs主体层板与卤素阴离子(F?, Cl?)间的超分子作用. 计算结果表明, LDHs主体层板复合卤素阴离子是一个自发过程. LDHs主客体间存在着较强的超分子作用, 主要包括静电和氢键作用, 相互作用能分别为?592.45和?444.01 kJ·mol?1. LDHs主体层板与卤素阴离子的前线轨道发生作用, 电子容易从卤素阴离子的HOMO向层板的LUMO转移, 形成的组装产物Mg6Al(OH)14+?F?比Mg6Al(OH)14+?Cl?稳定.  相似文献   

7.
Effects of copper salts containing different anions (SO(4)(2)(-), Cl(-), and NO(3)(-)) on the self-assembly of a designed peptide EAK16(II)GGH with affinity for Cu(2+) have been investigated. The peptide secondary structure, self-assembled nanostructures, and surface activity were observed to depend strongly on the type of anion. Over a salt concentration range from 0.05 to 10.0 mM, SO(4)(2)(-) induced long fiber formation, whereas Cl(-) and NO(3)(-) caused short fiber formation. The fiber length increased with copper sulfate concentration, but the concentration of copper chloride and copper nitrate did not affect the peptide nanostructures significantly. Analysis by Fourier transform infrared spectroscopy (FTIR) revealed that the addition of the copper salts tended to cause the peptide conformation to change from alpha-helix/random coil to beta-sheet, the extent to which depended on the anion type. This evidence of the anion effect was also supported by surface tension measurements using the axisymmetric drop shape analysis-profile (ADSA-P) technique. An explanation for the effect of anions on the peptide self-assembly was proposed. The divalent anion SO(4)(2)(-) might serve as a bridge by electrostatically interacting with two lysine residues from different peptide molecules, promoting beta-sheet formation. The extensive beta-sheet formation may further promote peptide self-assembly into long fibers. On the other hand, monovalent anions Cl(-) and NO(3)(-) may only electrostatically interact with one charged residue of the peptide; hence, a mixed secondary structure of alpha-helix/random coil and beta-sheet was observed. This observation might explain the predominant formation of short fibers in copper chloride and copper nitrate solutions.  相似文献   

8.
Thermogravimetric analysis (TG) and powder X-ray diffraction (PXRD) were used to study some selected Mg/Al and Zn/Al layered double hydroxides (LDHs) prepared by co-precipitation. A Mg/Al hydrotalcite was investigated before and after reformation in fluoride and nitrate solutions. Little change in the TG or PXRD patterns was observed. It was proposed that successful intercalation of nitrate anions has occurred. However, the absence of any change in the d (003) interlayer spacing suggests that fluoride anions were not intercalated between the LDH layers. Any fluoride anions that were removed from solution are most likely adsorbed onto the outer surfaces of the hydrotalcite. As fluoride removal was not quantified it is not possible to confirm that this has happened without further experimentation. Carbonate is probably intercalated into the interlayer of these hydrotalcites, as well as fluoride or nitrate. The carbonate most likely originates from either incomplete decarbonation during thermal activation or adsorption from the atmosphere or dissolved in the deionised water. Small and large scale co-precipitation syntheses of a Zn/Al LDH were also investigated to determine if there was any change in the product. While the small scale experiment produced a good quality LDH of reasonable purity; the large scale synthesis resulted in several additional phases. Imprecise measurement and difficulty in handling the large quantities of reagents appeared to be sufficient to alter the reaction conditions causing a mixture of phases to be formed.  相似文献   

9.
This paper reports a number of recent developments in the intercalation chemistry of Al(OH)(3). From Rietveld refinement and solid-state NMR, it has been possible to develop a structural model for the recently reported [M(II)Al(4)(OH)(12)](NO(3))(2)·yH(2)O family of layered double hydroxides (LDHs). The M(2+) cations occupy half of the octahedral holes in the Al(OH)(3) layers, and it is thought that there is complete ordering of the metal ions while the interlayer nitrate anions are highly disordered. Filling the remainder of the octahedral holes in the layers proved impossible. While the intercalation of Li salts into Al(OH)(3) is facile, it was found that the intercalation of M(II) salts is much more capricious. Only with Co, Ni, Cu, and Zn nitrates and Zn sulfate were phase-pure LDHs produced. In other cases, there is either no reaction or a phase believed to be an LDH forms concomitantly with impurity phases. Reacting Al(OH)(3) with mixtures of M(II) salts can lead to the production of three-metal M(II)-M(II)'-Al LDHs, but it is necessary to control precisely the starting ratios of the two M(II) salts in the reaction gel because Al(OH)(3) displays selective intercalation of M nitrate (Li > Ni > Co ≈ Zn). The three-metal M(II)-M(II)'-Al LDHs exhibit facile ion exchange intercalation, which has been investigated in the first energy dispersive X-ray diffraction study of a chemical reaction system performed on Beamline I12 of the Diamond Light Source.  相似文献   

10.
We synthesized Zr(4+) incorporated MgAl-layered double hydroxides, Mg(AlZr)-LDH(A) (where A denotes a counteranion in the interlayer space and is expressed as CO(3) for carbonate and Cl for chloride ions), with different molar ratios of Mg/(Al+Zr). Then we characterized their uptake behavior toward phosphate ions. CO(3)-type tertiary LDH materials synthesized at room temperature show low crystallinity, whereas the highly crystalline Cl-type tertiary LDH, [Mg(0.68)Al(0.17)Zr(0.14)(OH)(2)][Cl(0.26)(CO(3))(0.04)1.24H(2)O], was synthesized for the first time using a hydrothermal treatment at 120 degrees C. The distribution coefficients (K(d)) of oxo-anions were measured with a mixed solution containing trace amounts of the anions. The selectivity sequences were Cl(-), NO(-)(3)相似文献   

11.
The layered double hydroxides (LDHs) are nano-ordered layered compounds and well known for their ability to intercalate anionic compounds. Most LDH is prepared conventionally only with divalent and trivalent cations. In this study, Co-Zr-Si LDH, consisting of divalent, tetravalent, and tetravalent cations, was prepared and reacted with monocarboxylic acids at room temperature. The Co-Zr-Si LDH and intercalated compounds have been characterized by energy-dispersive X-ray spectrometry, X-ray powder diffraction, IR spectra, thermal analysis, and scanning electron microscopy (SEM). The insertion of cyanate and carbonate anions into LDH was confirmed by IR spectra. XRD patterns of the prepared Co-Zr-Si LDH showed that the interlayer spacing of the LDH is 0.78 nm. The spacing is similar to that of usual LDH in which chloride, carbonate, or bromide anion is the guest. SEM images showed that Co-Zr-Si LDH can exist as plate-like or fibrous structures.  相似文献   

12.
A comparative study on two different methods for preparing Mg-Al layered double hydroxides (LDH) containing various divalent transition metals M (M=Co, Ni, Cu) has been carried out. The first (conventional) method involved coprecipitation of divalent metals M(II) with Mg(II) and Al(III) cations using carbonate under basic conditions. The second approach was based on the ability of transition metals to form stable anionic chelates with edta4− (edta4−=ethylenediaminetetraacetate) that were synthesized and further introduced into LDH by coprecipitation with Mg and Al. The synthesized LDHs were characterized by X-ray diffraction (XRD) and X-ray fluorescence (XRF) methods, thermogravimetry with mass-selective detection of decomposition products (TG-MSD), Fourier transform infrared (FTIR) and Raman spectroscopy techniques. The results obtained were discussed in terms of efficiency of transition metal incorporation into the LDH structure, thermal stability of materials and the ability of metal chelates to intercalate the interlayer space of Mg-Al LDH. Vibrational spectroscopy studies confirmed that the integrity of the metal chelates was preserved upon incorporation into the LDH.  相似文献   

13.
Mg-Al oxide obtained by thermal decomposition of NO(3)(-)-intercalated Mg-Al layered double hydroxide (NO(3)·Mg-Al LDH) was found to treat HNO(3), acting as both a neutralizer and fixative for NO(3)(-). The degree of NO(3)(-) removal increased with time, Mg-Al oxide quantity, and temperature. The NO(3)(-) removal could be represented by a first-order reaction. The apparent activation energy was 52.9 kJ mol(-1), confirming that NO(3)(-) removal by Mg-Al oxide proceeded under chemical reaction control. Furthermore, the adsorption of NO(3)(-) on Mg-Al oxide could be expressed by a Langmuir-type adsorption isotherm. The maximum adsorption amount and equilibrium adsorption constant were 3.8 mmol g(-1) and 1.33, respectively. The Gibbs free energy change was -18 kJ mol(-1), confirming that the uptake of NO(3)(-) from HNO(3) by Mg-Al oxide proceeded spontaneously.  相似文献   

14.
The solid-state chelation of transition metal ions (Co(2+), Ni(2+), and Cu(2+)) from aqueous solutions into the lithium aluminum layered double hydroxide ([LiAl(2)(OH)(6)]Cl x 0.5H(2)O or LDH) which has been pre-intercalated with EDTA (ethylenediaminetetraacetate) ligand has been investigated. The intercalated metal cations form [M(edta)](2)(-) complexes between the LDH layers as indicated by elemental analysis, powder X-ray diffraction, and IR and UV-vis spectroscopies. If metal chloride or nitrate salts are used in the reaction with the LDH then co-intercalation of either the Cl(-) or NO(3)(-) anions is observed. In the case of metal acetate salts the cations intercalate without the accompanying anion. This can be explained by the different intercalation selectivity of the anions in relation to the LDH. In the latter case the introduction of the positive charge into LDH structure was compensated for by the release from the solid of the equivalent quantity of lithium and hydrogen cations. Time-resolved in-situ X-ray diffraction measurements have revealed that the chelation/intercalation reactions proceed very quickly. The rate of the reaction found for nickel acetate depends on concentration as approximately k[Ni(Ac)(2)](3).  相似文献   

15.
The rheological behaviour of aqueous suspensions of boehmite (AlO(OH)) modified with different Ce-salts (Ce(NO(3))(3), CeCl(3), Ce(CH(3)COO)(3) and Ce(2)(SO(4))(3)) was investigated at a fixed Ce/Al molar ratio (0.05). Freshly prepared boehmite suspensions were near-Newtonian and time-independent. A shear-sensitive thixotropic network developed when Ce-salts with monovalent anions were introduced in the nanoparticle sols. The extent of particle aggregation dramatically increased with ageing for Ce(NO(3))(3) and CeCl(3) whereas an equilibrium value was reached with Ce(CH(3)COO)(3). The addition of Ce(2)(SO(4))(3) with divalent anions involved no thixotropy but rather a sudden phase separation. The combined data set of IRTF and DRIFT spectra indicated that free NO(3)(-) anions of peptized boehmite adsorb on the nanoparticle surface by H-bond. The introduction of Ce-salts in the boehmite sol led to the coordination between Ce(3+) ions and NO(3)(-) anions adsorbed on boehmite i.e. to [Ce(NO(3))(4)(H(2)O)(x)](-) complex. Such coordination led to a thixotropic behaviour which was lower with Ce(NO(3))(3) compared to CeCl(3) and Ce(CH(3)COO)(3). In contrast, Ce(2)(SO(4))(3) formed insoluble complexes with dissolved aluminium species. The formation of H-bonded surface nitrate complexes was found to play a decisive role on the particle-particle interactions and consequently on the rheological behaviour of the sols.  相似文献   

16.
Carbonate and chloride ions mediate an ordered stacking of metal hydroxide slabs to yield ordered layered double hydroxides (LDHs) of Zn with Al, by virtue of their ability to occupy crystallographically well-defined interlayer sites. Other anions such as ClO(4)- (T(d)), BrO(3)- (C(3v)), and NO(3)- (coordination symmetry C(2v)) whose symmetry does not match the symmetry of the interlayer sites (D(3h) or O(h)) introduce a significant number of stacking faults, leading to turbostratic disorder. SO(4)(2-) ions (coordination symmetry C(3v)) alter the long-range stacking of the metal hydroxide slabs to nucleate a different polytype. The degree of disorder is also affected by the method of synthesis. Anion-exchange reactions yield a solid with a greater degree of order if the incoming ion is a CO3(2-) or Cl-. Incoming NO(3)- ions yield an interstratified phase, whereas incoming SO(4)(2-) ions generate turbostratic disorder. Conservation or its converse, elimination, of stacking disorders during anion exchange is the net result of several competing factors such as (i) the orientation of the hydroxyl groups in the interlayer region, (ii) the symmetry of the interlayer sites, (iii) the symmetry of the incoming ion, and (iv) the configuration of the anion. These short-range interactions ultimately affect the long-range stacking order or "crystallinity" of the LDH.  相似文献   

17.
A novel inorganic-organic red light emitting phosphor was synthesized by intercalating a sensitizer anion, terephthalate into Mg/Al/Eu layered double hydroxides through an ion exchange method. The basal spacing is 13.9 Å, indicating that a vertical arrangement of terephthalate anions within the gallery is adopted. This material displays much enhanced red luminescence from Eu3+ ions, suggesting that there is an efficient energy transfer from the excited state of the intercalated terephthalate anions to Eu3+ centres in the host layers. The optimal doping concentration of Eu3+ is 10 mol %.  相似文献   

18.
The pillaring of Mg(3)Al layered double hydroxides (LDHs) by the title polyoxometalates (POMs) was accomplished by ion exchange reaction of the LDH-hydroxide and -adipate precursors with the POM anion at ambient or refluxing temperatures. The structural, thermal and textural properties of the LDH-POM intercalates were elucidated based on XRD, FTIR, TEM, EDS, and N(2) adsorption-desorption studies. A gallery height of approximately 10 ? was observed for the LDH intercalated by the symmetrical Keggin POM, whereas two different gallery heights were found for the cylindrical Dawson (14.5 and 12.8 ?) and Finke (13.3 and 12.6 ?) anions, depending on the preparation temperature. The differences in POM orientations were rationalized in terms of different electrostatic and hydrogen-bonding interactions between the POM pillars and the LDH layers. Upon thermal treatment at >/=100 degrees C, the intercalated Dawson and Finke POM ions exhibited only one gallery orientation, regardless of synthesis conditions. The crystalline microporous structures were retained upon heating each LDH-POM intercalate in N(2) to 200 degrees C. Pillaring in all cases was accompanied by the formation of a poorly ordered Mg(2+)/Al(3+) salt impurity that formed on the external surfaces of the LDH crystals.  相似文献   

19.
The formation reaction and the intercalation of adenosine triphosphate (ATP) were studied for hydrotalcite (HT), a layered double hydroxide (LDH) of magnesium and aluminum. Hydrotalcite with nitrate ions in the interlayer (HT-NO(3)) was formed (A) by dropwise addition of a solution of magnesium and aluminum nitrates (pH ca. 3) to a sodium hydroxide solution (pH ca. 14) until the pH decreased from 14 to 10 and (B) by dropwise addition of the NaOH solution to the solution of magnesium and aluminum nitrates with pH increasing from 3 to 10. The precipitate obtained with method B was contaminated with aluminum hydroxide and the crystallinity of the product was low, possibly because aluminum hydroxide precipitates at pH 4 or 5 and remains even after HT-NO(3) forms at pH above 8. With method A, however, the precipitate was pure HT-NO(3) with increased crystallinity, since the solubility of aluminum hydroxide at pH above and around 10 is high as dissolved aluminate anions are stable in this high pH region, and there was no aluminum hydroxide contamination. The formed HT-NO(3) had a composition of [Mg(0.71)Al(0.29)(OH)(2)](NO(3))(0.29).0.58H(2)O. To intercalate ATP anions into the HT-NO(3), HT-NO(3) was dispersed in an ATP solution at pH 7. It was found that the interlayer nitrate ions were completely exchanged with ATP anions by ion exchange, and the interlayer distance expanded almost twice with a free space distance of 1.2 nm. The composition of HT-ATP was established as [Mg(0.68)Al(0.32)(OH)(2)](ATP)(0.080)0.88H(2)O. The increased distance could be explained with a calculated molecular configuration of the ATP as follows: An ATP molecule is bound to an interlayer surface with the triphosphate group, the adenosine group bends owing to its bond angles and projects into the interlayer to a height of 1 nm, and the adenosine groups aligned in the interlayer support the interlayer distance.  相似文献   

20.
Adsorption of a weak acid dye, methyl orange (MO) by calcined layered double hydroxides (LDO) with Zn/Al molar ratio of 3:1 was investigated. In the light of so called "memory effect," LDO was found to recover their original layered structure in the presence of appropriate anions, after adsorption part of MO(-) and CO(2-)(3) (come from air) intercalated into the interlayer of LDH which had been supported by XRD and ICP. The results of adsorption experiments indicate that the maximum capacity of MO at equilibrium (Q(e)) and percentage of adsorption (eta%) with a fixed adsorbent dose of 0.5 g L(-1) were found to be 181.9 mg g(-1) and 90.95%, respectively, when MO concentration, temperature, pH and equilibrium time were 100 mg L(-1), 298 K, 6.0 and 120 min, respectively. The isotherms showed that the adsorption of MO by Zn/Al-LDO was both consistent with Langmuir and Freundlich equations. The adsorption process was spontaneous and endothermic in nature and followed pseudo-second-order kinetic model. The calculated value of E(a) was found to be 77.1 kJ mol(-1), which suggests that the process of adsorption of methyl orange is controlled by the rate of reaction rather than diffusion. The possible mechanism for MO adsorption has also been presumed. In addition, the competitive anions on adsorption and the regeneration of Zn/Al-LDO have also been investigated.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号