用硫脲分子表面修饰的CdS纳米粒子的合成和表征

报道了用硫脲分子进行表面化学修饰的CdS纳米粒子的合成方法,并引入了AOT(磺基琥珀酸双-2-乙基己基酯钠盐)作为平衡反离子,进一步对CdS表面作了修饰,增加了CdS纳米粒子在有机溶剂中的稳定性和可分散性。我们还探讨了温度、浓度、pH等因素对合成的影响,并通过TEM、XRD、FT-IR等手段对产物结构进行了表征。所得微粒粒径为5 nm左右,呈球形,硫脲分子与CdS纳米粒子富Cd²⁺表面通过形成Cd-S配位键而修饰在粒子表面。这种表面修饰的CdS纳米粒子将在非线性光学及自组装方面具有优     

胃蛋白酶对CdTe纳米粒子的表面修饰及分析应用

以巯基乙酸为稳定剂和表面修饰剂, 在有机相中合成了平均粒径为3 nm左右的CdTe纳米粒子, 用胃蛋白酶改变纳米粒子的表面修饰状态并研究其系列特性. CdTe纳米粒子在320 nm处有强的紫外吸收, 在524.8 nm处有荧光发射. 经胃蛋白酶对其表面修饰后, 紫外吸收峰位不变, 但吸光强度升高, 荧光峰位蓝移至467.2 nm, 荧光强度降低. 温度、pH值及离子强度均对表面修饰产生影响. 在最佳实验条件下, 胃蛋白酶质量浓度在4—40 mg/L范围内与荧光降低值之间呈线性关系, 检测限(3σ)为0.28 mg/L(n=10), 该方法已被用于人体胃液胃蛋白酶的测定.     

表面修饰的二氧化锡纳米粒子的制备及微结构表征

采用胶体化学制得表面包覆有ＤＢＳ的二氧化锡纳米粒子，并运用一系列手段对其微结构进行了表征。     

TiO_2纳米粒子的表面修饰研究

利用表面修饰法合成了油酸 (OA)修饰的TiO2 纳米粒子 ,采用红外光谱 (IR)、透射电子显微镜 (TEM)和X射线光电子能谱 (XPS)对表面修饰的TiO2 纳米粒子进行了结构表征 ,并研究了油酸浓度对TiO2 表面覆盖量及在油中分散性能的影响 .研究结果表明通过油酸表面修饰 ,成功合成了具有油分散性能的纳米TiO2 ,并且获得了油酸修饰量与TiO2 的最佳配比 .     

金纳米粒子的表面修饰及生物应用进展

近年来纳米材料被广泛应用于生物医学、航空航天和精细化工等领域。构成纳米材料的纳米粒子具有小尺寸效应、表面效应和宏观量子隧道效应等性质。其中金纳米粒子由于其独特的荧光特性、良好的生物相容性和表面等离子共振等性质,被广大科研人员进行深入研究。例如,在生物医学领域,科研人员构建了一系列新型的金纳米比色传感器、光学探针及各类载药体系等。然而,目前金纳米粒子仍存在水分散性差、肾清除效率低和量子发射产率低等问题,限制了其广泛应用。因此,研究人员对金纳米粒子表面进行多样化修饰,从而能有效克服上述缺点。本文就目前主流配体表面修饰金纳米粒子的研究进展进行了详细总结,着重介绍了功能化金纳米粒子在生物成像、生物检测、生物治疗三方面的应用,最后对金纳米粒子的临床治疗机制的探索以及商业化的应用进行了展望,希望能为相关领域的研究者们提供新思路。     

CdS纳米粒子的表面修饰及其对光学性质的影响

用反胶束法合成了用表面活性剂分子磺基焉珀酸双－２－乙基已酯钠盐（ＡＯＴ）进行表面修饰的ＣｄＳ纳米粒子（记为ＣｄＳ／ＡＯＴ－ＳＯ３＾－）,研究了这种纳米粒子在正庚烷（ｈｅｐｔａｅ）和吡啶（Ｐｙ）溶剂中的荧肖及光解行为,发现其在正庚烷中荧光很强,而Ｐｙ却强烈地猝灭ＣｄＳ纳一子的荧光,用电荷转移猝灭机制进行了解释,这种解释为ＣｄＳ纳米粒子在Ｐｙ中光解实验进一步证实。     

表面修饰的硫化镉纳米粒子与牛血清白蛋白相互作用的荧光光谱研究

由于半导体纳米晶体独特的物理和化学特性,具有优良的光谱特征和光化学稳定性,其作为荧光生物探针,在生物学、医学方面的学术价值和良好的发展前景正引起科学工作者的广泛关注[1～3].     

基于超分子结构共掺杂纳米复合薄膜的制备与荧光特性

A novel materials design procedure based on the co-doping of metal nanoparticle and azo dye compound (MNPADC) is developed to improve the properties of functional molecules. The synthesized materials were characterized by transmission electron micrograph (TEM), ultraviolet-visible absorption spectra (UV-Vis) and fluorescence spectra (FS). It was found that the fluorescence intensity of methyl orange (MO) was enhanced by 5 times in the aqueous composite system doped with silver nanoparticles whereas it was reduced by 15% and 20% in composite films with co-mixing and coating structures, respectively. The results indicate that the properties of functional molecules can be greatly improved in composite film with supra molecular structure and that the procedure presented here is effective.     

聚丙烯酸控制合成的聚合物/二氧化硅复合纳米球

以3-氨丙基三甲氧基硅烷(APMS)和正硅酸乙酯(TEOS)为硅源, 与阴离子聚合物聚丙烯酸(PAA)链之间通过S^-N⁺-I^-机理组装合成了聚丙烯酸-二氧化硅(PAA/SiO₂)复合纳米球. SEM, TEM, TG和FTIR表征结果表明, 合成的纳米球是聚丙烯酸和二氧化硅复合物, 平均直径约为80 nm. 在合成PAA/SiO₂复合纳米球的体系中, 加入不同量的有机溶剂THF能够调控复合球的尺度.     

醇热解法合成超顺磁性氧化铁纳米粒子及其性能

以甲氧基聚乙二醇同时作为溶剂、还原剂及修饰剂,在高温下分解乙酰丙酮铁,制备了纳米Fe3O4粒子,采用透射电子显微镜和X射线衍射分析表征材料的形貌和相组成,傅里叶变换红外光谱仪表征材料的表面修饰物,超导量子干涉仪测试合成的纳米粒子的磁性能,纳米粒度与zeta电势分析仪测试磁性纳米粒子在水中的zeta电势。 结果表明,纳米Fe3O4粒子的大小为（10.1±1.6） nm,粒度均一,单分散性好,在300 K下具有超顺磁性,饱和磁化强度为45 A·m2/kg。 红外结果表明,-COO-共价结合在粒子表面。 zeta电势为-25 mV。 其在水中的稳定性与以三甘醇为反应介质、高温分解法制备的纳米Fe3O4粒子作比较,表现出长时间（60 d以上）的良好分散性。 静电作用及空间位阻效应是其高稳定分散性的原因。     

新型丙烯酸共聚物的合成与表征

以生物试剂磷酸烯醇式丙酮酸钾（PEPK）、丙烯酸（AA）为聚合单体,采用Na2S2O8-Na2S2O5氧化还原引发体系进行温和的水溶液聚合反应,通过平行合成得到了a、b、c 3个系列的PEPK-AA共聚物。通过红外光谱（FT-IR）、核磁共振（13C-NMR）以及共聚物分子量的测定,表征了PEPK-AA共聚物的化学结构...     

聚合物/粘土纳米复合材料中的粘土有机化

回顾了聚合物/粘土纳米复合材料中所用粘土的有机化方法与有机粘土的热稳定性,及其对复合材料性能的影响,指出在聚合物/粘土复合材料中粘土片层间距的变化同样有可能受到层间插层剂构象变化的影响、聚合物/粘土纳米材料的长期热氧稳定性与热失重结果可能不一致。     

Ionization by pH and Anionic Surfactant Binding Gives the Same Thickening Effects of Crosslinked Polyacrylic Acid Derivatives

Physical properties of aqueous solutions of hydrophobically modified crosslinked polyacrylic acids change quite extensively as the polymer is charged up. A study is carried out concerning the similarities between two polymer ionization processes, that is, by pH increment and anionic surfactant addition. The two processes charge the polymer by distinctly different mechanisms. At sufficiently high pH the carboxylic groups of the polymer are virtually all ionized and the polymer is, therefore, fully charged. The effective repulsion among the charged groups due to the entropy of the counterions promotes an increased stiffness as well as an expansion of the polymer particles. We investigate here how the ionization and swelling will be if, instead of high pH, the polymer is at low pH conditions but associated to ionic surfactants. Surfactants associate to the polymer both in a noncooperative way by the binding of individual surfactant molecules and in a cooperative way as micelles since the polymer promotes surfactant self-assembly. This binding leads to a highly charged polymer-surfactant complex and leads to an osmotic swelling as well. The swelling and the gelation were monitored by rheology and dynamic light scattering, of polymer solutions by varying the pHs and adding ionic surfactants at low pH. The results show that ionization by surfactants and by pH lead to approximately the same gelation degree, as can be seen by similar viscosity values. Both processes result in dramatic viscosity increases, up to 8 orders of magnitude. More hydrophobic surfactants, with longer alkyl chain, are shown to be more efficient as enhancers of swelling and gelation. The network that is formed at high pH or at sufficiently high concentration of surfactant can be weakened or even disrupted if monovalent or divalent salts are added, demonstrating the role of counterion entropy.     

Polymer–Colloid Complexes Based on Cationic Imidazolium Amphiphile,Polyacrylic Acid and DNA Decamer

The solution behavior and physicochemical characteristics of polymer–colloid complexes based on cationic imidazolium amphiphile with a dodecyl tail (IA-12) and polyacrylic acid (PAA) or DNA decamer (oligonucleotide) were evaluated using tensiometry, conductometry, dynamic and electrophoretic light scattering and fluorescent spectroscopy and microscopy. It has been established that PAA addition to the surfactant system resulted in a ca. 200-fold decrease in the aggregation threshold of IA-12, with the hydrodynamic diameter of complexes ranging within 100–150 nm. Electrostatic forces are assumed to be the main driving force in the formation of IA-12/PAA complexes. Factors influencing the efficacy of the complexation of IA-12 with oligonucleotide were determined. The nonconventional mode of binding with the involvement of hydrophobic interactions and the intercalation mechanism is probably responsible for the IA-12/oligonucleotide complexation, and a minor contribution of electrostatic forces occurred. The latter was supported by zeta potential measurements and the gel electrophoresis technique, which demonstrated the low degree of charge neutralization of the complexes. Importantly, cellular uptake of the IA-12/oligonucleotide complex was confirmed by fluorescence microscopy and flow cytometry data on the example of M-HeLa cells. While single IA-12 samples exhibit roughly similar cytotoxicity, IA-12–oligonucleotide complexes show a selective effect toward M-HeLa cells (IC₅₀ 1.1 µM) compared to Chang liver cells (IC₅₀ 23.1 µM).     

超顺磁/荧光双功能纳米粒子的合成、表征和生物功能化

通过反相微乳液聚合, 在热解法合成的MnFe2O4纳米粒子表面修饰了一层掺杂有荧光染料(联吡啶钌)的SiO2, 制备了同时具有超顺磁性和荧光特性的双功能纳米粒子. 再通过氨基硅烷的修饰作用, 将该双功能纳米粒子与万古霉素结合, 所得到的生物功能化的纳米粒子表现出很好的对大肠杆菌的识别和磁性分离能力. 本研究制备的超顺磁/荧光双功能纳米粒子具有磁性强、光稳定性高、制备简单、分散性好和尺寸均匀等优点, 可以推断这种新型纳米粒子在生物学、医学和分析化学等领域中将有广阔的应用前景.     

新型磁性荧光Fe3O4-CdSe纳米复合材料的制备

以1-十八烯作为高沸点溶剂, 在磁性粒子表面沉积量子点获得新型的磁性荧光Fe₃O₄-CdSe 纳米异质结构. 首先以乙酰丙酮铁(Fe(acac)₃)为前驱体, 二苯醚为溶剂, 油酸为表面活性剂和油胺(OAm)为表面活性剂兼还原剂, 通过溶剂热法制备单分散性的Fe₃O₄ 纳米粒子. 然后以1-十八烯为高沸点溶剂, CdO 为镉源,TOP-Se为硒源, 十六胺为表面活性剂以及硬脂酸为生长促进剂和成核剂制备得到新型的Fe₃O₄-CdSe纳米异质结构. 通过透射电镜(TEM), 傅里叶变换红外(FTIR)光谱, X射线衍射(XRD)谱, X射线光电子能谱(XPS)分析仪, 振动样品磁强计(VSM), 紫外-可见(UV-Vis)光谱和光致发光(PL)等手段对Fe₃O₄-CdSe 纳米复合材料的结构和性能进行表征. 结果表明, CdSe纳米粒子成功地吸附在Fe₃O₄纳米粒子表面, 并沿着c轴生长, 形成了宽3.6 nm, 长分别为14.5 和32.5 nm的新型枣核状和钉子状的异质结构体. 这种新型的Fe₃O₄-CdSe纳米复合材料是由磁铁矿Fe₃O₄和六方形的CdSe棒状结构组成, 具有较好的荧光性能和超顺磁性. 随着CdSe棒长度的增加, 荧光吸收峰向长波方向移动. Fe₃O₄纳米粒子, 枣核状和钉子状的Fe₃O₄-CdSe纳米复合材料的饱和磁化强度分别是57.80, 40.76和31.10 emu·g^-1.     

改性羟基磷灰石/聚乳酸纳米复合材料的结晶行为

利用溶剂复合的方法制备了具有良好生物相容性的表面接枝聚(γ-苄基-L-谷氨酸)的改性羟基磷灰石/聚乳酸纳米复合材料, 并研究了其熔融与结晶行为. 结果表明, 聚乳酸的玻璃化转变温度为60.3 ℃, 而复合材料的玻璃化转变温度达到65.8 ℃, 不同样品在140 ℃等温结晶后, 改性羟基磷灰石/聚乳酸复合材料的球晶直径仅为聚乳酸(PLLA)球晶直径的16.7%~66.7%. 复合材料的熔点提高到184.4 ℃.     

Surface modification of proteins by covalent binding of acrylic polymers

Surface modification of enzymes for a potential use in therapy was obtained with a new type of tailor-made copolymers ofNacryloylmorpholine andN-acryloxysuccinimide. The first monomer was designed to confer solubility on the polymer, whereas the second was used to give it reactivity toward protein amino groups. The reactivity of polymers of different composition towards amino acid derivatives and model proteins, such as catalase and ribonuclease-A, is described. Water soluble and catalytically active enzyme derivatives were obained using copolymers prepared with a mixture of N-acryloxysuccinimide andn-acryloylmorpholine in a 1:99 molar ratio. At increasing molar ratio (3:97, 10:90) extensive crosslinking between polymer and enzymes takes place, yielding insoluble adducts.     

碳酸钙的原位合成及表面改性

利用碳化法, 选用几种常见的改性剂(硬脂酸钠、十八碳醇磷酸酯和油酸)对碳酸钙进行了原位合成及表面改性. 通过活化度、白度、接触角的测定, 对比了其改性效果, 同时通过傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)、透射电镜(TEM)等测试手段对产品进行表征. FT-IR结果表明, 改性剂与碳酸钙表面是以化学键合和物理吸附方式相结合. 碳酸钙改性后, 其红外υ3特征吸收峰出现约44 cm-1的蓝移现象. 对反应机理进行了初步探讨. 实验结果表明, 当十八碳醇磷酸酯用量达到2%(以碳酸钙的质量分数计)时, 产品活化度达到99.9%, 白度值达到97.3%, 接触角达到了122.25°, 从而为新型无机填料的制备提供了理论依据和合成手段.     

聚对苯二甲酸乙二酯的等离子体表面改性研究

阐述了等离子体原理,综述了等离子体对聚对苯二甲酸乙二酯表面改性的研究工作,大量的实验数据表明了这种方法可以成功改善各种性能。等离子体处理后PET材料表面粗糙度增加,并产生化学基团,因此可改善以下各种性能:润湿性、粘接性、染色性、抗静电性,对人体的生物相容性,添加TiO2的杀菌性,PET表面化学镀金属的性能。PET表面的刻蚀作用,导致其重量的减轻,可替代部分碱减量处理。