Fluorescence imaging and phototoxicity effects of new formulation of chlorin e6-polyvinylpyrrolidone

Evaluations of the efficiency of a new formulation of chlorin consisting of a complex of trisodium salt chlorin e6 (Ce6) and polyvinylpyrrolidone (PVP) in photodynamic therapy (PDT) and fluorescence diagnosis was performed on poorly differentiated human bladder carcinoma murine model with the following specific aims: (i) to qualitatively evaluate the fluorescence accumulation in human bladder tumor, (ii) to determine fluorescence distribution of Ce6-PVP using the tissue extraction technique and fluorescence imaging technique, (iii) to compare the fluorescence distribution of Ce6, Ce6-PVP and Photofrin in skin of nude mice, and (iv) to investigate phototoxicity caused by different parameters (drug-light interval, drug dose, irradiation fluence rate and total light fluence) in PDT. The fluorescence of the Ce6-PVP formulation was determined either by fluorescence imaging measurements or by chemical extraction from the tissues displaying similar trends of distribution. Our results demonstrated that the Ce6-PVP formulation possesses less in vivo phototoxic effect compared to Ce6 alone. The phototoxicity revealed a strong dependence on the drug and light dosimetry as well as on the drug-light interval. In PDT, the Ce6-PVP compound was most toxic at the 1h drug-light interval at 200J/cm(2), while Ce6 alone was most toxic at a light dose of more that 50J/cm(2) at the 1 and 3h drug-light interval. We also confirmed that Ce6-PVP has a faster clearance compared to Ce6 alone or Photofrin. This eliminates the need for long-term photosensitivity precautions. In conclusion, the Ce6-PVP formulation seems to be a promising photosensitizer for fluorescence imaging as well as for photodynamic treatment.     

Separation of double-stranded DNA fragments by capillary electrophoresis in interpenetrating networks of polyacrylamide and polyvinylpyrrolidone

Mixtures of two polymers with totally different chemical structures, polyacrylamide and polyvinylpyrrolidone (PVP) have been successfully used for double-stranded DNA separation. By polymerization of acrylamide in a matrix of PVP solution, the incompatibility of these two polymers was suppressed. Laser light scattering (LLS) studies showed that highly entangled interpenetrating networks were formed in the solution. Further systematic investigation showed that double-stranded DNA separation was very good in these interpenetrating networks. With a concentration combination of as low as 2% w/v PVP (weight-average molecular mass Mr = 1 x 10(6) g/mol) + 1% w/v polyacrylamide (Mr = 4 x 10(5) g/mol), the 22 fragments in pBR322/HaeIII DNA, including the doublet of 123/124 bp, have been successfully separated within 6.5 min. Under the same separation conditions, similar resolution could only be achieved by using polyacrylamide (Mr = 4 x 10(5) g/mol) with concentrations higher than 6% w/v and could not be achieved by using only PVP (Mr = 1 x 10(6) g/mol) with a concentration as high as 15% w/v. It is noted that the interpenetrating network formed by 2% PVP and 1% polyacrylamide has a very low viscosity and can dynamically coat the inner wall of a fused-silica capillary. The separation reached an efficiency of more than 10(7) theoretical plate numbers/m and a reproducibility of less than 1% relative standard deviation of migration time in a total of seven runs. The interpenetrating network could stabilize polymer chain entanglements. Consequently, the separation speed was increased while retaining resolution.     

Separation of double-stranded DNA fragments by capillary electrophoresis using polyvinylpyrrolidone and poly(N,N-dimethylacrylamide) transient interpenetrating network

A noncross-linked interpenetrating polymer network (IPN), consisting of poly(N,N-dimethylacrylamide) (PDMA) and polyvinylpyrrolidone (PVP, weight-average molecular weight M(w) = 1 x 10(6) g/mol) was synthesized by polymerizing N,N-dimethylacrylamide (DMA) monomers directly in PVP buffer solution and tested as a separation medium for double-stranded (ds)DNA analysis without further purification. Due to the incompatibility of PVP and PDMA, a simple solution mixture could incur a microphase separation and showed poor performance on dsDNA separation. However, a dramatic improvement was achieved by the formation of an IPN. We attributed the high sieving ability of IPN as due to an increase in the number of entanglements by the more extended polymer chains. Apparent viscosity studies showed that the IPN had a much higher viscosity than the simple mixture containing the same amount of PDMA and PVP. In 1 x Tris-borate-EDTA (TBE) buffer, the concentration ratio of PDMA and PVP had a great effect on the DNA separation. At optimal conditions, the 22 fragments in pBR322/HaeIII DNA were successfully separated within 15 min, with a resolution of better than 1.0 for 123/124 bp.     

Complexes of Chlorin e6 with Pluronics and Polyvinylpyrrolidone: Structure and Photodynamic Activity in Cell Culture

Polymeric carriers are extensively used in photodynamic therapy (PDT) for increase of efficacy of photosensitizers. Here, we report the influence of nine Pluronic copolymers on phototoxicity of chlorin e6 (Ce6), in particular 5‐ to 7‐fold rise in the phototoxicity caused by hydrophilic Pluronics F127, F108, F68 and F87 and practically no influence on Ce6 of more hydrophobic polymers. The revealed value of 0.2 mg mL^?1 of Pluronic F127 concentration sufficient for half‐of‐maximal increase of Ce6 photodynamic activity proved to be close to 0.16 mg mL^?1 inherent in well‐documented carrier poly(N‐vinylpyrrolidone) (PVP). The dissociation constants of Ce6 complexes with Pluronic F127 and PVP that were estimated from UV spectra were 0.252 and 0.036 mg mL^?1, respectively, indicating higher stability of Ce6 complex with PVP. According to the results of ¹H‐NMR studies of Ce6 complexes, the porphyrin interacts not only with hydrophobic regions but also with hydrophilic sides of both polymers.     

Photodissociation of p-xylene in polar and nonpolar solutions

The photodissociation of p-xylene at 266 nm in n-heptane and acetonitrile has been studied with use of nanosecond fluorescence and absorption spectroscopy. The p-methylbenzyl radical was identified in n-heptane and acetonitrile by its fluorescence, which was induced by excitation at 308 nm. The p-xylene radical cation was observed in acetonitrile by its absorption. In n-heptane, the decay rate of the S(1) state of p-xylene ((3.2 +/- 0.2) x 10(7) s(-1)) is equal to the growth rate of the p-methylbenzyl radical ((2.7 +/- 0.4) x 10(7) s(-1)), showing that the molecule dissociates via the S(1) state into the radical by C-H bond homolysis (quantum efficiency approximately 5.0 x 10(-3)). In acetonitrile, the formation of the p-xylene radical cation requires two 266 nm photons, and the decay rate of the radical cation ((1.6 +/- 0.2) x 10(6) s(-1)) equals the growth rate of the p-methylbenzyl radical ((2.0 +/- 0.2) x 10(6) s(-1)). This shows that the radical cation dissociates into the radical by deprotonation (quantum efficiency approximately 8.9 x 10(-2)).     

Photophysical properties of glucoconjugated chlorins and porphyrins and their associations with cyclodextrins

Glucoconjugated analogues of the meta-hydroxyphenyl porphyrin (m-THPP) and meta-hydroxyphenyl chlorin (m-THPC) has been recently synthesized. The characteristics of their triplet states have been determined with regard to their involvement in the photodynamic (PDT) efficiency. In the case of porphyrin derivatives, triplet quantum yields (Phi(T)) were ranging from 0.42 to 0.55 and triplet life times (tau(T)) from 1 to 5 micros. High reaction rate constants (k(q)) with molecular oxygen (k(q): 1.2-1.6 x 10(9)s(-1)) have been found. The triplet lifetimes of chlorin derivatives were about four times higher than those of porphyrins whereas the Phi(T) and k(q) values remained quite similar. Singlet oxygen yields of glucosylated and non-glucosylated porphyrins and chlorins were not significantly different within experimental errors (Phi(Delta)((1)O(2)): 0.41-0.58). Furthermore, it has been shown that glucoconjugated photosensitizers could undergo associations with the methyl-beta-cyclodextrin (Me-beta-CD) which exhibit high triplet lifetimes and singlet oxygen yields ranging from 0.27 to 0.48.     

Ultrafast strong-field dissociative ionization dynamics of CH2Br2 probed by femtosecond soft x-ray transient absorption spectroscopy

Femtosecond time-resolved soft x-ray transient absorption spectroscopy based on a high-order harmonic generation source is used to investigate the dissociative ionization of CH(2)Br(2) induced by 800 nm strong-field irradiation. At moderate laser peak intensities (2.0 x 10(14) Wcm(2)), strong-field ionization is accompanied by ultrafast C-Br bond dissociation, producing both neutral Br ((2)P(32)) and Br(*) ((2)P(12)) atoms together with the CH(2)Br(+) fragment ion. The measured rise times for Br and Br(*) are 130+/-22 fs and 74+/-10 fs, respectively. The atomic bromine quantum state distribution shows that the BrBr(*) population ratio is 8.1+/-3.8 and that the Br (2)P(32) state is not aligned. The observed product distribution and the time scales of the photofragment appearances suggest that multiple field-dressed potential energy surfaces are involved in the dissociative ionization process. At higher laser peak intensities (6.2 x 10(14) Wcm(2)), CH(2)Br(2) (+) undergoes sequential ionization to form the metastable CH(2)Br(2) (2+) dication. These results demonstrate the potential of core-level probing with high-order harmonic transient absorption spectroscopy for studying ultrafast molecular dynamics.     

Time-Resolved Studies of the Excited-State Dynamics of meso-Tetra(hydroxylphenyl)chlorin in Solution

Meso-tetra(hydroxyphenyl)chlorin (m-THPC) is a new photosensitizer developed for potential use in photodynamic therapy (PDT) for cancer treatment. In PDT, the accepted mechanism of tumor destruction involves the formation of excited singlet oxygen via intermolecular energy transfer from the excited triplet-state dye to the ground triplet-state oxygen. Femtosecond transient absorption measurements are reported here for the excited singlet state dynamics of m-THPC in solution. The observed early time kinetics were best fit using a triple exponential function with time constants of 350 fs, 80 ps and > or = 3.3 ns. The fastest decay (350 fs) was attributed to either internal conversion from S2 to S1 or vibrational relaxation in S2. Multichannel time-resolved absorption and emission spectroscopies were also used to characterize the excited singlet and triplet states of the dye on nanosecond to microsecond time scales at varying concentrations of oxygen. The nanosecond time-resolved absorption data were fit with a double exponential with time constants of 14 ns and 250 ns in ambient air, corresponding to lifetimes of the S1 and T1 states, respectively. The decay of the T1 state varied linearly with oxygen concentration, from which the intrinsic decay rate constant, ki, of 1.5 x 10(6) s-1 and the biomolecular collisional quenching constant, kc, of 1.7 x 10(9) M-1 s-1 were determined. The lifetime of the S1 state of 10 ns was confirmed by fluorescence measurements. It was found to be independent of oxygen concentration and longer than lifetimes of other photosensitizers.     

DNA-binding properties and photocleavage activity of cationic water-soluble chlorophyll derivatives

Three cationic water-soluble chlorin e(6) derivatives, that is, 6a-,gammab-,7c-tris(2-trimethylammonioethyl)chlorin e(6) (1), 6a-,gammab-,7c-tris(3-methylpyridiniummethyl)chlorin e(6) (2), and 6a-,gammab-, 7c-tris(2-trimethylammonioethyl)-2-(3-trimethylammonioprop-1-enyl)chlorin e(6) (3), have been designed and synthesized to allow the study of their DNA-binding and -photocleavage activities. The DNA-unwinding assay, measurements of melting temperatures of double-stranded DNA, and the induced CD and visible absorption spectra have revealed that 1 and 3 are intercalated into the base pairs of the double-helical DNA, while 2 is bound to outside the minor groove of the double-helical DNA. The cationic water-soluble chlorin e(6) derivatives effectively cleave the double-helical DNA under photoirradiation and the DNA-photocleavage activity increases in the order 3>1>2. The DNA-binding and -photocleavage characteristics of the three cationic water-soluble chlorin e(6) derivatives are influenced by aspects of their molecular structure, such as the kind, number, and position of the cationic substituents.     

One-step synthesis and characterization of difunctionalized N-confused tetraphenylporphyrins

Three disubstituted N-confused porphyrins (2-4) were prepared in ca. 4% yield using a one-pot synthesis. These porphyrins bear 3,5-di-tert-butylphenyl groups substituted at the C(5) and C(20) meso positions and para-substituted (Br, NO(2), ethynyl) phenyl groups at the C(10) and C(15) meso positions. The specific orientation of the aryl rings around the macrocycle in porphyrin 2 was definitively determined using a combination of 1D ((1)H and (13)C) and 2D (gHMQC and gHMBC) NMR spectroscopy. The absorption spectra of 2-4 in CH(2)Cl(2) and dimethylacetamide are similar to those of N-confused tetraphenylporphyrin in the same solvents but have Soret and Q-bands that are shifted to lower energies. Steady-state fluorescence measurements revealed Q(x)(0,0) and Q(x)(0,1) bands similar in energy to the unsubstituted NCPs 1i and 1e. The fluorescence quantum yield results for two of these NCPs (2, 4) are atypical of porphyrin behavior and are being further investigated by time-resolved spectroscopy.     

Ultrafast spectroscopy of free-base N-confused tetraphenylporphyrins

The photophysical characterization of the two tautomers (1e and 1i) of 5,10,15,20-tetraphenyl N-confused free-base porphyrin, as well as the tautomer-locked 2-methyl 5,10,15,20-tetraphenyl N-confused free-base porphyrin, was carried out using a combination of steady state and time-resolved optical techniques. N-Confused porphyrins, alternatively called 2-aza-21-carba-porphyrins or inverted porphyrins, are of great interest for their potential as building blocks in assemblies designed for artificial photosynthesis, and understanding their excited-state properties is paramount to future studies in multicomponent arrays. Femtosecond resolved transient absorption experiments reveal spectra that are similar to those of tetraphenylporphyrin (H2TPP) with either Soret or Q-band excitation, with an extinction coefficient for the major absorbing band of 1e that was about a factor of 5 larger than that of H2TPP. The lifetime of the S1 state was determined at a variety of absorption wavelengths for each compound and was found to be consistent with time-resolved fluorescence experiments. These experiments reveal that the externally protonated tautomer (1e) is longer lived (tau = 1.84 ns) than the internally protonated form (1i, tau = 1.47 ns) by approximately 369 ps and that the N-methyl N-confused porphyrin was shorter lived than the tautomeric forms by approximately 317 ps (DMAc) and approximately 396 ps (benzene). Steady-state fluorescence experiments on tautomers 1e and 1i and the N-methyl analogues corroborate these results, with fluorescence quantum yields (Phi(Fl)) of 0.046 (1e, DMAc) and 0.023 (1i, benzene), and 0.025 (DMAc) and 0.018 (benzene) for the N-methyl N-confused porphyrin. The lifetime and quantum yield data was interpreted in terms of structural changes that influence the rate of internal conversion. The absorption and transient absorption spectra of these porphyrins were also examined in the context of DFT calculations at the B3LYP/6-31G(d)//B3LYP/3-21G(d) level of theory and compared to the spectra/electronic structure of H2TPP and tetraphenyl chlorin.     

Application of SERS and SEF Spectroscopy for Detection of Water-Soluble Fullerene–Chlorin Dyads and Chlorin e6

Free fluorescence spectra in solution and surface-enhanced Raman scattering (SERS) and surface enhanced fluorescence (SEF) spectra of chlorin e6 and water-soluble covalent fullerene–chlorin dyads have been studied. It has been demonstrated that chlorin e6 and covalent fullerene–chlorin dyads have similar characteristic SERS spectra. The fullerene–chlorin dyads show a pronounced SEF signal, while native chlorin e6 has no fluorescence on surface, which is consistent with the theory predicting an inverse dependence of the SEF intensity on the free fluorescence quantum yield. The concentration dependence of the SEF intensity is linear for the dyads in the range 0.1–2.0 μmol/L. These effects allow one to determine, with high sensitivity, the content of fullerene–chlorin dyads with a low quantum yield of free fluorescence in solutions, which opens wide opportunities for study of biological properties of fullerene–chlorin dyads and their applications in medicine.     

Reversible intramolecular triplet-triplet energy transfer in benzophenone-N-methylphthalimide dyad

In the present paper, we synthesized a series of benzophenone (BP)-N-methylphthalimide (MePI) dyads (Cn, n = 3, 6, and 9, where n denotes the number of methylene in the linker) and investigated the photochemical properties and intramolecular triplet-triplet energy transfer from BP(T1) to MePI. Formation of two different intramolecular complexes was found, that is, a ground-state complex and a singlet exciplex. The formation of the triplet-equilibrium between MeBP and MePI was observed. The triplet-equilibrium constant (1.0 and 1.1 for C6 and C9, respectively) and forward ((3.8 +/- 1.3) x 107 and (3.9 +/- 1.2) x 107 s-1 for C6 and C9, respectively) and back ((3.8 +/- 1.3) x 107 and (3.6 +/- 1.2) x 107 s-1 for C6 and C9, respectively) energy transfer rates were estimated from the result of transient absorption measurements. From the van't Hoff plots, enthalpy and entropy change for the equilibrium formation were estimated.     

Iron monoxide photodissociation

The photodissociation of (56)FeO was studied by means of the velocity map imaging technique. A molecular beam of iron atoms and iron monoxide molecules was created using an electrical discharge with an iron electrode in a supersonic expansion of molecular oxygen. The ground state iron atom Fe((5)D(4)) and FeO concentrations in the molecular beam have been estimated. The dissociation energy of the FeO X (5)Delta ground electronic state was found to be D(0) (0)(FeO)=4.18+/-0.01 eV. The effective absorption cross section of FeO at 252.39 nm (vac), leading to the Fe((5)D(4))+O((3)P) dissociation channel, is approximately 1.2 x 10(-18) cm(2). A (1+1) resonantly enhanced multiphoton ionization spectrum of (56)FeO in the region 39 550-39 580 cm(-1) with rotational structure has been observed, but not assigned. Angular distributions of Fe((5)D(4)) and Fe((5)D(3)) products for the channel FeO-->Fe((5)D(4,3))+O((3)P) have been measured at several points in the 210-260 nm laser light wavelength region. The anisotropy parameter varies strongly with wavelength for both channels.     

Effects of noncovalently bound quinones on the ground and triplet states of zinc chlorins in solution and bound to de novo synthesized peptides

The Qy absorption band of two chlorophyll derivatives, zinc chlorin e6 (ZnCe6) and zinc pheophorbide a (ZnPheida), in aqueous solution is bathochromically shifted on addition of quinones, e.g., 1,4-benzoquinone (BQ), with a corresponding shift of the fluorescence band. This is due to a complex formation of zinc chlorins induced by BQs and subsequent rearrangement. The time-resolved absorption spectra after laser pulse excitation show triplet quenching of the pigments by BQ and other quinones via electron transfer. The effects of electron transfer to noncovalently bound BQs were also studied with de novo synthesized peptides, into which ZnCe6 and ZnPheida were incorporated as model systems for the primary steps of photosynthetic reaction centers. Whereas the photophysical properties are similar to those of the unbound zinc chlorins, no BQ-mediated complex formation was observed.     

Free surface electrospinning of fibers containing microparticles

Many materials have been fabricated using electrospinning, including pharmaceutical formulations, superhydrophobic surfaces, catalysis supports, filters, and tissue engineering scaffolds. Often these materials can benefit from microparticles included within the electrospun fibers. In this work, we evaluate a high-throughput free surface electrospinning technique to prepare fibers containing microparticles. We investigate the spinnability of polyvinylpyrrolidone (PVP) solutions containing suspended polystyrene (PS) beads of 1, 3, 5, and 10 μm diameter in order to better understand free surface electrospinning of particle suspensions. PS bead suspensions with both 55 kDa PVP and 1.3 MDa PVP were spinnable at 1:10, 1:5, and 1:2 PS:PVP mass loadings for all particle sizes studied. The final average fiber diameters ranged from 0.47 to 1.2 μm and were independent of the particle size and particle loading, indicating that the fiber diameter can be smaller than the particles entrained and can furthermore be adjusted based on solution properties and electrospinning parameters, as is the case for electrospinning of solutions without particles.     

Ultrafast energy-electron transfer cascade in a multichromophoric light-harvesting molecular square

A molecular square with dimensions of about 4 nm, incorporating sixteen pyrene chromophores attached to four ditopic bay-functionalized perylene bisimide chromophores, has been synthesized by coordination to four Pt(II) phosphine corner units and fully characterized via NMR spectroscopy and ESI-FTICR mass spectrometry. Steady-state and time-resolved emission as well as femtosecond transient absorption studies reveal the presence of a highly efficient (>90%) and fast photoinduced energy transfer (k(en) approximately equal to 5.0 x 10(9) s(-1)) from the pyrene to the perylene bisimide chromophores and a very fast and efficient electron transfer (>94%, k(et) approximately equal to 5 x 10(11) up to 43 x 10(11) s(-1)). Spectrotemporal parametrization indicates upper excited-state electron-transfer processes, various energy and electron-transfer pathways, and chromophoric heterogeneity. Temperature-dependent time-resolved emission spectroscopy has shown that the acceptor emission lifetime increases with decreasing temperature from which an electron-transfer barrier is obtained. The extremely fast electron-transfer processes (substantially faster and more efficient than in the free ligand) that are normally only observed in solid materials, together with the closely packed structure of 20 chromophoric units, indicate that we can consider the molecular square as a monodisperse nanoaggregate: a molecularly defined ensemble of chromophores that partly behaves like a solid material.     

Design, synthesis, and photophysical characterization of water-soluble chlorins

The use of chlorins as photosensitizers or fluorophores in a range of biological applications requires facile provisions for imparting high water solubility. Two free base chlorins have been prepared wherein each chlorin bears a geminal dimethyl group in the reduced ring and a water-solubilizing unit at the chlorin 10-position. In one design (FbC1-PO3H2), the water-solubilizing unit is a 1,5-diphosphonopent-3-yl ("swallowtail") unit, which has previously been used to good effect with porphyrins. In the other design (FbC2-PO3H2), the water-solubilizing unit is a 2,6-bis(phosphonomethoxy)phenyl unit. Two complementary routes were developed for preparing FbC2-PO3H2 that entail introduction of the protected phosphonate moieties either in the Eastern-half precursor to the chlorin or by derivatization of an intact chlorin. Water-solubilization is achieved in the last step of each synthesis upon removal of the phosphonate protecting groups. The chlorins FbC1-PO3H2 and FbC2-PO3H2 are highly water-soluble (>10 mM) as shown by 1H NMR spectroscopy (D2O) and UV-vis absorption spectroscopy. The photophysical properties of the water-soluble chlorins in phosphate-buffered saline solution (pH 7.4) at room temperature were investigated using static and time-resolved absorption and fluorescence spectroscopic techniques. Each chlorin exhibits dominant absorption bands in the blue and the red region (lambda = 398, 626 nm), a modest fluorescence yield (Phi f approximately 0.11), a long singlet excited-state lifetime (tau = 7.5 ns), and a high yield of intersystem crossing to give the triplet state (Phi isc = 0.9). The properties of the water-soluble chlorins in aqueous media are comparable to those of hydrophobic chlorins in toluene. The high aqueous solubility combined with the attractive photophysical properties make these compounds suitable for a wide range of biomedical applications.     

Preparation of PVDF porous membranes by using PVDF-g-PVP powder as an additive and their antifouling property

The hydrophilic PVDF-g-PVP powder was used as additive to prepare a series of PVDF/PVDF-g-PVP blend porous membranes via an immersion precipitation phase inversion process. FTIR-ATR measurements confirmed that the hydrophilic PVP preferentially segregated to the interface between membrane and coagulant. SEM images showed that there was no big change in the membrane cross-section with the amount of PVDF-g-PVP increased. However, the membrane surface roughness increased with the amount of PVDF-g-PVP increased according to AFM data. The mean pore size of membranes reached max when the amount of PVDF-g-PVP was 10 wt%. The water contact angle and filtration experiments revealed that the surface enrichment of PVP endowed the membranes with significantly enhanced surface hydrophilicity and protein-adsorption resistance. The flux recovery of the porous membranes was increased from 37.50% to 77.23% with the amount of PVDF-g-PVP increased from 0 to 50 wt%, also indicating that the antifouling property of the porous membranes was improved.     

Phase-resolved fluorescence study of mono-L-aspartyl chlorin E6

The properties of a photosensitizer for photodynamic therapy, mono-L-aspartyl chlorin e6 (NPe6), were investigated using phase-resolved fluorescence. NPe6 was analyzed in water solution at concentrations ranging from 3.13x10(-7) to 8.00x10(-5) M. The photophysical parameters of the lowest singlet excited state of NPe6 molecules were experimentally determined. It was confirmed that NPe6 molecules were in the isolated molecular state at concentrations below 1.00x10(-5) M. It was also confirmed that the fluorescence in this concentration range was ascribable to the electronic transition of isolated NPe6 molecules from the lowest singlet excited state to the ground state. At concentrations above 1.00x10(-5) M, some of the NPe6 molecules formed dimers in water solution, which caused a red shift of the fluorescence spectrum and an enhancement of fluorescence in the 700-750 nm wavelength region. Semiempirical molecular orbital calculation revealed that the sodium aspartate attached to the tetrapyrrole ring through the ethanoic group was remarkably bent with respect to the tetrapyrrole plane. This bending appeared to hinder the formation of NPe6 dimers at concentrations up to 1.00x10(-5) M.