Quasi-three-level Nd:YAG laser under diode pumping directly into the emitting level

We present theoretical and experimental investigations on ground-state direct pumping at 869 nm into the emitting level ⁴F_3/2 of end-pumped quasi-three-level Nd:YAG lasers operating at 946 nm. We have demonstrated, what we believe is for the first time, a Nd:YAG laser at 946 nm directly pumped by diodes and obtained 1.6 W of output power.     

Collinear and non-collinear sum-frequency mixing inβ-BBO for a tunable 195–198 nm all-solid-state laser system

We attained tunable UV laser radiation between 195 and 198 nm by sum-frequency mixing two synchronized flashlamp-pumped solid-state Q-switch lasers, a Nd:YAG laser frequency quadrupled to 266 nm and a tunable (730–770 nm) alexandrite laser. UV pulse energies of 0.12 mJ with repetition rates of 10 Hz were attained in collinear, as well as non-collinear sum-frequency interaction in a-Barium Borate (BBO) crystal with a conversion efficiency of 2.5%. Theoretical models for the non-collinear phase-matching interaction were investigated at UV wavelengths below 200 nm.     

Short pulse, high peak power, diode pumped, passively Q-switched 946 nm Nd:YAG laser

We report on generation of 946 nm laser pulses of a few nanosecond duration and up to 3.7 kW peak power from a compact diode-pumped passively Q-switched Nd:YAG laser. This power is 2.5 times as much as what previously has been obtained from this type of a laser. The short pulses with the record high peak power may be particularly attractive for laser range finding type applications.     

An 8.1 W diode pumped solid-state quasi-continuous-wave yellow laser at 589 nm by intracavity sum-frequency mixing generation

We report an L-shaped symmetrical co-folding-arm plane-plane diode pumped solid-state yellow laser at 589 nm by using intracavity sum-frequency mixing. By carefully designing the cavity and employing various techniques to optimize the laser’s specifications, a quasi-continuous-wave (QCW) free-oscillation yellow laser source, which has an average output power of 8.1 W, a beam quality factor of M² = 2.3, and a repetition rate of 1.1 kHz, is developed. The generation of yellow laser at 589 nm is achieved by intracavity sum-frequency mixing between the laser lines at 1319 nm and 1064 nm of an Nd:YAG laser in a KTP crystal. To the best of our knowledge, the 8.1 W output at 589 nm is higher than any other diode pumped solid-state yellow laser generated by intracavity sum-frequency generation so far.     

High-power simultaneous dual-wavelength emission of an end-pumped Nd:YAG laser using the quasi-three-level and the four-level transition

An efficient continuous-wave (CW) simultaneous dual-wavelength lasing (SDWL) of an LD end-pumped Nd:YAG laser utilizing a quasi-three-level transition at 946 nm and a four-level transition at 1064 nm is reported. A theoretical model has been introduced to determine the threshold conditions for SDWL. The temperature distributions of a Nd:YAG crystal under different pump powers have been analyzed. In the experiments, a CW SDWL output power of 5.12 W at a temperature of 273 K has been achieved with a pump power of 17 W, giving a slope efficiency of 16.36%.     

Investigation of passively synchronized dual-wavelength Q-switched lasers based on V:YAG saturable absorber

In this paper the results of a theoretical and experimental investigation of synchronized passive Q-switching of two Nd:YVO₄-based solid-state lasers operating at two different wavelengths, is described. A V:YAG saturable absorbing material was used as a passive Q-switch performing the synchronization of the two laser fields. This material provides Q-switching operation at both 1064 and 1342 nm wavelengths simultaneously, saturating the same energy level. By adjusting the pump power of both lasers, it was possible to optimize the overlap of the two pulse trains and to switch between different states of synchronization. A theoretical model based on rate equations, which has been developed in order to investigate optical performance of the laser system, is in a good agreement with the experimental results. The principle of synchronized Q-switching can lead to new, pulsed all-solid-state light sources at new wavelengths based on sum-frequency mixing processes.     

Diode-pumped passively Q-switched Nd:GdVO4 laser at 1342 nm with V:YAG saturable absorber

We have demonstrated an efficient diode-pumped passively Q-switched Nd:GdVO₄ laser working at 1342 nm by using an uncoated V³⁺:YAG crystal as the saturable absorber, in which both a-cut and c-cut Nd:GdVO₄ crystals are employed. At the maximum absorbed pump power of 9.45 W, the maximum average output power can reach 519 mW and 441 mW corresponding to the output coupler with different transmission of 3% and 10% by using an a-cut Nd:GdVO₄ crystal at 1342 nm, while the shortest pulse duration could be as low as 21.7 ns and 22.3 ns with the repetition rate of 48.41 kHz and 53.25 kHz by using a c-cut Nd:GdVO₄ crystal, corresponding to the output coupler with different transmission of 3% and 10% at 1342 nm, and the single Q-switched pulse energy are 6.67 uJ and 7.06 uJ, the pulse peak power are 307 W and 316 W, respectively. The experimental results show that c-cut Nd:GdVO₄ laser can generate shorter pulse with higher peak power in comparison with a-cut one.     

High power and high beam quality CW green beam generated by diode-side-pumped intracavity frequency doubled Nd:YAG laser

We report a stable high power and high beam quality diode-side-pumped CW green laser from intracavity frequency doubled Nd:YAG laser with LBO crystal. By using a advanced resonator, a large fundamental mode size in the laser crystal and a tight focus in the nonlinear crystal could be obtained simultaneously, which are favorable for high power and high beam quality CW green laser generation. The green laser delivered a maximum 532 nm output power of 40 W. The corresponding optical-to-optical conversion efficiency and electrical-to-optical conversion efficiency were 8.6% and 5.0%, respectively. Under 532 nm output power of 34 W, the beam quality factor was measured to be 1.6.     

4.44 W of CW 515 nm green light generated by intracavity frequency doubling Yb:YAG thin disk laser with LBO

We demonstrate the generation of 515 nm green laser with diode-pumped Yb:YAG thin disk by intracavity frequency doubling of type-I phase-matched LiB₃O₅(LBO) in a V-type cavity at room temperature. A continuous-wave (CW) output power of 4.44 W at 515 nm was obtained. Optical-optical efficiency of 515 nm green laser is 14.6%. The fluctuation of green laser was 1.6% at the maximum output power in 0.5 h. Thermal lensing effects in Yb:YAG thin disk are investigated too.     

532 nm laser based on V-type doubly resonant intra-cavity frequency-doubling

LD side-pumped dual interconnected V-type quasi-continuous wave green laser has been demonstrated. The two Nd:YAG modules were placed in a plane-concave V-type resonator and a plane-concave straight cavity formed two stable operation beam of the 1064-nm fundamental frequency laser. Through acousto-optic Q-switched and frequency doubling crystal, two double-frequency laser beams arrived at the folded flat mirror, which were unidirectional output by the folded flat mirror at the end. As the pumped current was 50 A, the 532 nm green laser maximum average output power of 206 W at a repetition of 22.4 kHz was achieved with a pulse width of 201 ns and the largest single pulse energy of 9.2 mJ, corresponding to a peak power of 45.8 kW and a double frequency efficiency of 60.2%.     

Simultaneous dual-wavelength laser operation at 1342 and 946 nm in two laser crystals and their sum-frequency mixing

A sum-frequency yellow-green laser at 554.9 nm is reported by this paper, 946 nm wavelength is obtained from ⁴F_3/2-⁴I_9/2 transition in Nd:YAG and 1342 nm wavelength is obtained from ⁴F_3/2-⁴I_13/2 transition in Nd:YVO₄. Using a doubly folded-cavity type-II critical phase matching KTP crystal intra cavity to make 946 nm laser from Nd:YAG and 1342 nm laser from Nd:YVO₄ frequency summed, with incident pumped power of 30 W in Nd:YAG and 20 W in Nd:YVO₄, TEM₀₀ mode yellow-green laser at 554.9 nm at 1.15 W is obtained and its M² factor is less than 1.22. The experimental results show that the Nd:YAG and Nd:YVO₄ crystals intra-cavity sum-frequency mixing is an effective method for yellow-green laser and it can be applied to other two laser crystals to obtain more all-solid-state lasers with different wavelengths.     

High-power Nd:YAG planar waveguide laser with YAG and Al2O3 claddings

Thermal effects in Nd:YAG planar waveguide lasers with non-symmetrical claddings are discussed. The heat generated in the active core can be removed more efficiently by directly contacting the active core to the heat sink. Several cladding materials are compared to optimize the heat removal. Furthermore, uniform pumping is achieved with oblique edge-pumping technique. Using quasi-CW pumping at 1 KHz repetition rate, an average output power of 280 W with a slope efficiency of 38% is obtained with a positive unstable resonator.     

Compact low threshold Cr:YAG passively Q-switched intracavity optical parametric oscillator

We report a compact KTP-based intracavity optical parametric oscillator (IOPO) driven by a diode-end-pumped passively Q-switched Nd:YVO₄/Cr:YAG laser. For the first time, we take the thermal lens effect of the Cr:YAG into consideration and discuss its impact on the signal output. Diode pump threshold as low as 0.52 W has been achieved, which is the lowest result reported to date. At the incident diode pump power of 4 W, we obtained the maximum signal average and peak power of 358 mW and 12.5 kW, respectively, corresponding to a diode-to-signal conversion efficiency of 9%. Moreover, cavity-dumping characteristic and pulse transforming process from 1064 to 1573 nm are qualitatively analyzed.     

Q-switched Nd lasers pumped directly into the F3/2 emitting level

The influence of the direct pumping into the ⁴F_3/2 emitting level on the output characteristics of continuous-wave (CW) pumped, passively or actively (acoustooptic, AO) Q-switched Nd lasers is discussed. In case of passive Q-switching by Cr⁴⁺:YAG saturable absorber (SA) crystal, the change of pumping wavelength from 0.81 μm into the highly-absorbing ⁴F_5/2 level to 0.88 μm into the ⁴F_3/2 level of Nd does not modify the energy of the Q-switch pulse, but increases the pulse repetition rate and the laser average power for the same absorbed pump power. This is demonstrated with 0.81 and 0.88 μm CW laser diode-pumped Nd:YAG and Nd-vanadate lasers with average output power in the watt-level range at 1.06 μm. The effect is explained by the control of passive Q-switching by the intracavity photon flux that is influenced by the pump wavelength and by the initial transmission of the SA crystal. On the other hand, it is discussed and experimentally proved that due to the possibility to control externally the frequency of switching, in case of the AO Q-switched Nd laser the change of the pump wavelength from 0.81 to 0.88 μm increases the pulse energy for a fixed frequency, leading to a corresponding increase of the average laser power.     

Comparison of Nd:YAG Ceramic Laser Pumped at 885nm and 808nm

Laser performance of 1064 nm domestic Nd：YAG ceramic lasers for 885 nm direct pumping and 808 nm traditional pumping are compared. Higher slope efficiency of 34% and maximum output power of 16.5 W are obtained for the 885nm pump with a 6ram length 1 at.% Nd：YAG ceramic. The advantages for 885nm direct pumping are discussed in detail. This pumping scheme for highly doping a Nd：YAG ceramic laser is considered as an available way to generate high power and good beam quality simultaneously.     

43 W picosecond laser and second-harmonic generation experiment

Combining the advantages of diode-end-pumped Nd: YVO₄ and diode-side-pumped Nd: YAG amplifiers, a high average power and high beam quality picosecond laser is designed. The system delivers a picosecond laser with average power of 43.4 W and good beam quality of M² < 1.7. By focusing the high power picosecond laser in LBO crystal, 532 nm green laser with maximal power of 20.8 W is generated and the conversion efficiency of second-harmonic generation reaches 56.4% when 17.7 W green laser obtained from the fundamental frequency laser with power of 31.4 W and beam quality of M² < 1.25.     

High-efficiency continuous-wave and Q-switched diode-end-pumped multi-wavelength Nd:YAG lasers

We demonstrate high-efficiency diode-end-pumped multi-wavelength Nd:YAG lasers for continuous-wave and Q-switched operation. For the continuous-wave case, the Nd:YAG laser oscillates at 1.06 and 1.3 μm simultaneously; the maximum output power of 2.0 W (M² = 1.3) and 3.6 W (M² = 1.8) have been achieved at the incident pump power of 20.3 W, with the respective average slope efficiencies of 12.0% and 21.4%, for the lines of 1.06 and 1.3 μm, respectively. For the Q-switched operation, we achieve the average output power of 1.3 W (M² = 2.7) at 1.06 μm and 2.0 W (M² = 3.0) at 1.3 μm with the corresponding peak power of 10.2 and 4.2 kW under an incident pump power of 20.3 W.     

41 mW high average power picosecond 177.3 nm laser by second-harmonic generation in KBBF

We report on the generation of high average power, high repetition rate, and picosecond (ps) deep-ultraviolet (DUV) 177.3 nm laser. The DUV laser is produced by second-harmonic generation of a frequency-tripled mode-locked Nd: YVO₄ laser (<15 ps, 80 MHz) with KBBF nonlinear crystal. The influence of different fundamental beam diameters on DUV output power and KBBF-SHG conversion efficiency are investigated. Under the 355 nm pump power of 7.5 W with beam diameter of 145 μm, 41 mW DUV output at 177.3 nm is obtained. To our knowledge, this is the highest average power for the 177.3 nm laser. Our results provide a power scaling by three times with respect to previous best works.     

26.3-W continuous-wave, diode-double-end-pumped all-solid-state Nd:GdVO4 laser operating at 1.34 μm

A high-power continuous-wave (CW) all-solid-state Nd:GdVO₄ laser operating at 1.34 μm is reported here. The laser consists of a low doped level Nd:GdVO₄ crystal double-end-pumped by two high-power fiber-coupled diode lasers and a simple plane-parallel cavity. At an incident pump power of 88.8 W, a maximum CW output of 26.3 W at 1.34 μm is obtained with a slope efficiency of 33.7%. To the best of our knowledge, this is the highest output at 1.34 μm ever generated by diode-end-pumped all-solid-state lasers.     

Thermal-lens measurement in a side-pumped 1.3 μm Nd:YVO4 bounce laser

We investigated thermal-lensing effects in a side-pumped 1.3 μm Nd:YVO₄ slab laser amplifier having a bounce geometry. The thermal-lens power during 1.3 μm laser action was 1.3-times larger than that without laser action. Excited-state absorption is the main cause for increased heat loading during laser operation. The heat-loading formula in end-pumped 1.3 μm vanadate lasers having low Nd doping can be extended to account for heat generation in diode-side-pumped vanadate bounce lasers having high Nd doping.