Synthesis and characterization of dithienobenzothiadiazole-based donor–acceptor conjugated polymers for organic solar cell applications

New donor–acceptor conjugated polymers (P1 and P2) containing a fused-ring dithienobenzothiadiazole (DT-BTD building block) were synthesized by using the Stille copolymerization method. The synthesized polymers were characterized by ¹H NMR, GPC, and elemental analysis. The optical band gaps of the polymers were found to be 1.86 and 1.9 eV, respectively, as calculated from their film onset absorption edge. Upon annealing both produced a distinct shoulder peak in their film absorption spectra. The electrochemical studies of P1 and P2 revealed that the HOMO and LUMO energy levels of the polymer were −5.3, −5.1 eV, and −3.4, −3.2 eV, respectively. The polymers are thermally stable up to 250–350 °C.     

Synthesis and characterization of novel conjugated polymers based on 3-cyclobutene-l,2-dione moiety

Three novel conjugated polymers bearing 3,4-bis(4-hexylthiophen-2-yl)-3-cyclobutene-1,2-dione unit in their main chain have been synthesized successfully in good yields through Suzuki or Stille coupling reaction.Their molecular structures have been confirmed by FT-IR,~1H NMR and ~(13)C NMR.All these copolymers exhibit broad and strong absorption bands in UV-vis region,and their optical band gaps are calculated to be 1.6-2.0 eV.suggesting that they have good coverage with the solar spectrum.These polymers...     

Cyclic and non cyclic aliphatic–aromatic polyesters derived from biomass: Study of structures by MALDI-ToF and NMR

New polyesters were prepared by polycondensation in solution of 1,4:3,6 dianhydrohexitols with various aliphatic–aromatic acid dichlorides which differ by their chain length (m = 6,8,10). They are obtained with yields in the range of between 89% and 95%. In order to obtain these polymers within optimum conditions, a systematic study was conducted on the effect of the parameters involved in the reaction, such as the alkyl chain length of acid dichlorides and the endo or exo positions of hydroxyl function of diols. The resulting polyesters were characterized by different analytical techniques such as NMR (¹H and ¹³C), FT-IR spectrometry, SEC measurements and MALDI-ToF mass spectrometry. Under optimized conditions a high molar fraction of cyclic polyesters was formed.The differential scanning calorimetry (DSC) measurements revealed an amorphous character with glass transition temperatures in the range of 27–45 °C. The polymers are obtained with inherent viscosities in the range of 0.11–0.25 dL/g with a polydispersity index between 1.75 and 1.99.     

Synthesis and characterization of azobenzene-containing side-chain photorefractive polymers

The synthesis and characterization of some new high-T_g photorefractive polymers, polyphosphazene P3-P8, were described. They were obtained via a post-azo coupling reaction. The resulting materials have been characterized by means of ¹H NMR, ³¹P NMR, FT-IR, UV-vis, GPC and DSC. Chromophore contents up to 14 mol% have been realized. The polymers had high glass transition temperatures and good optical transparency. Measurements reveal that they possess relatively large magnitude of photoinduced birefringence.     

Synthesis and characterization of novel polybenzimidazoles containing 4-phenyl phthalazinone moiety

A novel series of homo- and copoly(phthalazinone benzimidazole)s were synthesized from various stoichiometric mixtures of 4-(4-(4-(4-carboxyphenoxy)phenyl)-1-oxophthalazin-2(1H)-yl)benzoic acid (CPPBC) and isophthalic acid (IPA) with 3,3′-diaminobenzidine (DAB) by solution polycondensation in polyphosphoric acid (PPA). The structures of the obtained polymers were characterized by FT-IR and ¹H NMR. The obtained polybenzimidazoles were found to be soluble in aprotic polar solvents such as N-methyl-2-pyrolidinone (NMP), N,N-dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO) and m-cresol, without the addition of inorganic salts. The inherent viscosities of the polybenzimidazoles were in the range of 1.10–2.05 dL/g. All of the polymers show amorphous nature as evaluated by WAXD. These polymers have high glass transition temperatures (T_gs) in the range of 398–408 °C. Thermogravimetric analysis exhibit that these polybenzimidazoles containing 4-phenyl phthalazinone moiety have excellent thermal stability with the temperatures for 5% and 10% weight loss of the polymers ranging from 516 to 594 °C and 560 to 672 °C, respectively.     

Conjugated donor-acceptor copolymers from dicyanated naphthalene diimide

A series of donor–acceptor (D–A) alternating copolymers including P(2CNNDI-T), P(2CNNDI-TT), P(2CNNDI-BT), and P(2CNNDI-BDT) based on dicyanated naphthalene diimide (2CN-NDI) in backbones were presented and characterized in this contribution. Their structures were unambiguously identified by NMR spectra. Optical and electrochemical measurements revealed that their LUMO energy levels are substantially lowered at about −4.4 eV by the substitution of electron-deficient cyano groups on the backbone of as-synthesized polymers. And the HOMO levels varied from −6.15 eV to −5.70 eV as a reflection of electron-donating ability of combined thiophene derivatives. The moderate electron-transporting characteristics under ambient conditions based on these dicyanated polymers indicated their promising applications as air-stable electron transporting semiconductors in future electronics.     

Synthesis and properties of novel soluble poly(aryl amine ketone)s as high-performance polymers

A series of poly(aryl amine ketone)s have been obtained by the condensation polymerization of different aromatic dibromides with different primary aromatic diamines via palladium-catalyzed aryl amination reaction. The structures of polymers are characterized by means of FT-IR, 1H NMR spectroscopy, and elemental analysis. The results show an agreement with the proposed structures. DSC and TG measurements show that polymers possess high glass transition temperature (Tg>170℃) and good thermal stability with high decomposition temperatures (TD>450℃). These novel polymers also exhibit good mechanical behaviors and good solubility.     

Diketopyrrolopyrrole‐based acceptor–acceptor conjugated polymers: The importance of comonomer on their charge transportation nature

Besides the donor–acceptor (D–A) type, acceptor–acceptor (A–A) polymers are another class of important alternative conjugated copolymers, but have been less studied in the past. In this study, two kinds of A–A polymers, P1 and P2 , have been designed and synthesized based on diketopyrrolopyrrole in combination with the second electron‐deficient unit, perylenediimide or thieno[3,4‐c]pyrrole‐4,6‐dione. UV–vis absorption spectroscopy revealed that these two kinds of polymers have a band gap of 1.28–1.33 eV. Their highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels are around ?5.6 and ?4.0 eV for P1 polymers, whereas ?5.4 and ?3.7 eV for P2 polymers, respectively. Density functional theory study disclosed that P1 backbone is in a vastly twisting state, whereas that of P2 is completely planar. Furthermore, organic field‐effect transistor devices were fabricated using these two kinds of polymers as the active material. Of interest, the devices based on P1 polymers displayed n‐channel behaviors with an electron mobility in the order of 10^?4 cm² V^?1 s^?1. In contrast, the P2 ‐based devices exhibited only p‐channel charge transportation characteristics with a hole mobility in the order of 10^?3 cm² V^?1 s^?1. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2356–2366     

Novel amphoteric pH-sensitive hydrogels derived from ethylenediaminetetraacetic dianhydride, butanediamine and amino-terminated poly(ethylene glycol): Design, synthesis and swelling behavior

Novel amphoteric pH-sensitive hydrogels with pendant carboxyl and backbone tertiary amine groups were designed and synthesized. First, ethylenediaminetetraacetic dianhydride (EDTAD) reacted with butanediamine (BDA) via N-acylation reaction to give a polyamide prepolymer with pendant carboxyl groups (PEB–COOH); then amino-terminated poly(ethylene glycol) 500 (ATPEG500) was added as a cross-linking agent to produce the desired network polymer (PEB–ATPEG500–COOH). The obtained hydrogels are potentially degradable and non-toxic since its backbone and cross-linking sections are both linked by amide bonds and all monomers have been proved as safe. FTIR, ¹H NMR, ¹³C NMR and ninhydrin reaction method were employed to qualitatively and quantitatively characterize the obtained polymers. The effect of cross-linking agent amount, characterized by the molar ratios (R_m) of NH₂ groups in ATPEG500 to pendant COOH groups in PEB–COOH, on the swelling behavior of the proposed hydrogel was examined. The results indicate that the equilibrium swelling ratio decreases and the pH-sensitivity becomes retarded with the increase of R_m. For PEB–ATPEG500–COOH hydrogels with R_m no more than 0.42, they exhibited three SR_e variation zones at pH 2–4, pH 6–7 and pH 9–11, respectively, suggesting obvious and interesting amphoteric pH-sensitivity. In addition, the swelling kinetics tests on PEB–ATPEG500–COOH with R_m = 0.32 reveal that the swelling kinetics of proposed hydrogel follows a Fickian diffusion process in media of pH 7, and an anomalous diffusion process in media of pH 2 and 11. The above obtained results will facilitate the application of this proposed hydrogel in biomedical fields, particularly in the drug controlled release.     

Synthesis and characterization of novel conjugated copolymers containing 3,4-dialkoxythiophene and 1,3,4-oxadiazole units

In this report we describe the synthesis, optical and electrochemical properties of new conjugated copolymers (P1-P4) based on 3,4-dialkoxythiophene and 1,3,4-oxadiazole units. The copolymers are prepared using the precursor polyhydrazide route. The chemical structures of the copolymers are confirmed using FTIR, NMR spectroscopy and CHNS analysis. The polymers exhibit good thermal stability with the onset decomposition temperature in nitrogen at around 300 °C. The optical and charge-transporting properties of the copolymers are investigated by UV-visible absorption spectroscopy, fluorescence emission spectroscopy and cyclic voltammetry. The polymers depicted blue/green fluorescence under the irradiation of UV light. Cyclic voltammetry studies reveal that these copolymers have low-lying LUMO energy levels ranging from −3.28 to −3.32 eV and high-lying HOMO energy levels ranging from −5.26 to −5.62 eV, which indicated that they may be promising candidates for the fabrication of polymer light-emitting diodes. In addition, the copolymers showed good third-order non-linear optical properties.     

Conjugated polymers based on 1,8‐naphthalene monoimide with high electron mobility

1,4,8,9‐Naphthalene diimides (NDIs) with strong electron accepting ability and high stability are excellent building blocks for semiconductor polymers. However, 1,8‐naphthalene monoimide (NMI) with similar structure and energy levels as that of NDI has never been used to construct conjugated polymers because of synthetic difficulty. Herein, 3,6‐dibromo‐NMI (DBNMI) with bulky alkyl groups was obtained effectively in a four‐step synthesis, and three donor‐acceptor (D‐A) type conjugated polymers based on NMI were firstly prepared. These polymers have strong absorption in the range of 300–600 nm, low LUMO level of 3.68 eV, and moderate bandgaps of 2.18 eV. Space charge limiting current measurements indicate these polymers are typical electron transporting materials, and the highest electron mobility is up to 5.8 × 10⁻³ cm² V⁻¹ s⁻¹, which is close to the star acceptor based on NDI (N2200, 5.0 × 10⁻³ cm² V⁻¹ s⁻¹). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 276–281     

Synthesis and characterisation of polymethacrylates containing para-, meta- and ortho-monosubstituted azobenzene moieties in the side chain

Three sets of novel side-chain liquid crystalline polymers with monosubstituted azobenzene moieties in the side-chain have been studied. These are poly(p-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PPHABM), poly(m-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PMHABM) and poly(o-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (POHABM). The chemical structure of the monomers was confirmed by ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The structural characterisation of the polymers was performed by ¹H NMR spectroscopy and gel permeation chromatography, and their phase behaviour and liquid crystalline properties were studied using differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. The results show that the transitional behaviour of side-chain liquid crystalline polymers containing monosubstituted azobenzene moieties depends strongly on the position of the substituent on the azobenzene moiety; for example, the ortho-monosubstituted polymers do not form liquid crystalline phases, but all the para- and meta-monosubstituted polymers exhibit a smectic A phase. Furthermore, the glass transition temperature (T_g ) of the polymers decreases in the order, para > meta > ortho. For the PPHABM and PMHABM polymers the isotropic temperature (T_i ) and liquid crystalline range (ΔT, from T_g to T_i ) are found to be in the order, para > meta, although it is surprising that the associated enthalpy changes in these polymers is the opposite order, meta > para.     

Synthesis and photovoltaic properties of main chain polymeric metal complexes containing 1,10‐phenanthroline metal complexes conjugating alkyl fluorene or alkoxy benzene by C═C bridge for dye‐sensitized solar cells

Four main chain polymeric metal complexes (P1–P4) based on 1,10‐phenanthroline metal complexes via the Heck coupling have been synthesized and characterized by Fourier transform infrared spectroscopy, ¹H NMR, UV–Vis absorption, photoluminescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and cyclic voltammetry. To investigate their photovoltaic properties, the dye‐sensitized solar cells based on these polymers dyes are studied, under the illumination of AM 1.5G, 100 mW/cm². The study results show the four polymers exhibit good thermally stable and the solar cells based on them have good device performance, and the maximum power conversion efficiency is up to 0.735% for the solar cells based on P3 with a short‐circuit current (J_sc) of 1.68 mA/cm² and an open‐circuit voltage (V_oc) of 0.62 V. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and Properties of Novel Poly（amine ether）s

Using aromatic bis（4-bromophenyl） ether and various aromatic diamines as the monomers, a series of novel poly（amine ether）s （PAEs） have been synthesized via palladium-catalyzed aryl amination, which is the Hartwig-Buchwald polycondensation reaction. Their structures were characterized by means of elemental analysis, FT-IR, 1^H NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structures. Their general properties were studied by DSC and TG and it＇s obvious that they show high glass transition temperatures （Tg〉200 ℃）, good thermal stability with high decomposition temperatures （TD〉500℃） and excellent solubility. The mechanical behavior of these polymers suggested that they could be considered a new class of high-performance polymers.     

Blue-luminescent poly(p-phenylenevinylene) derivatives: Synthesis and effect of side-group size on the optical properties

New conjugated polymers based on separated PPV-type chromophores and incorporating different types of solubilizing side-groups (ethoxy: P1, hexyloxy: P2, dodecyloxy: P3 and benzyloxy: P4) were synthesized via Wittig polycondensation, using a series of bisphenol A-derived di(triphenylphosphonium) salts as starting monomers. The polymers are soluble in common organic solvents and their structures were confirmed by ¹H NMR, ¹³C NMR and FTIR spectroscopies. The optical properties of these materials were investigated by UV–vis absorption and fluorescence spectroscopies. In dilute solution, quasi-identical fluorescence spectra were obtained and all the polymers showed a blue emission (420, 445 nm) and a narrow spectrum. In thin solid films, the polymers show side-group-dependent optical behavior and, whereas the emission remains blue in the case of P2, P3 and P4, a green fluorescence was observed for the ethoxylated polymer P1. From cyclic voltammetry analysis, the electrochemical band gaps were estimated to be 2.99, 3.07, 3.15 and 3.06 eV for P1, P2, P3 and P4, respectively. Single-layer diode devices of the [indium tin oxide/polymer/aluminum] configuration have been fabricated and show relatively low turn-on voltages between 2.6 and 4.9 V.     

Synthesis and characterization of low‐band‐gap conjugated polymers containing phenothiazine and benzo‐2,1,3‐thia‐/seleno‐diazole

Two phenothiazine‐based conjugated polymers, poly(3, 7‐divinylene‐N‐octyl‐phenothiazine‐alt‐benzo‐2,1,3‐ thiadiazole) (PQS) and poly(3,7‐divinylene‐N‐octyl‐phenothiazine‐alt‐benzo‐2,1,3‐selenodiazole) (PQSe) were synthesized by Heck coupling reaction. The chemical structures of the two polymers were confirmed by ¹H‐NMR and Ft‐IR. They showed good solubility in some common organic solvents such as tetrahydrofuran (THF), chloroform. The weight‐average molecular weight (Mw) of the polymers determined by GPC in THF against polystyrene standards was 3.7 × 10³ for PQS and 1.9 × 10³ for PQSe, respectively. The temperatures of 5% weight loss (T₅) were 385.0°C for PQS and 324.0°C for PQSe, respectively, determined by TGA measurements under nitrogen ambience. UV–vis absorption spectra of the polymer films showed the absorption maxima at 537 nm for PQS and 539 nm for PQSe, with the full width at half maximum (FWHM) of 190 and 230 nm, respectively. The optical band gaps ( ) of the polymer films are 1.86 eV for PQS and 1.80 eV for PQSe, respectively. As the polymers have low‐band‐gap and broad absorption in the visible region, they may be used as potential light‐harvesting materials for photovoltaic devices (PVDs). Furthermore, photoluminescence (PL) spectra of the polymer solutions showed the emission maxima at 698 nm for PQS and 709 nm for PQSe, with FWHM of 152 nm and 167 nm, respectively, which revealed that these two polymers may be used as red and near infrared light‐emitting materials for polymeric light‐emitting diodes (PLEDs). Copyright © 2009 John Wiley & Sons, Ltd.     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Perylene diimide copolymers with dithienothiophene and dithienopyrrole: Use in n‐channel and ambipolar field‐effect transistors

Solution‐processable polymers consisting of perylene diimide (PDI) acceptor moieties alternating with dithienothiophene (DTT), N‐dodecyl‐dithienopyrrole (DTP), or oligomers of these donor groups have been synthesized. We have, in addition to varying the donor, varied the N,N′ substituents of the PDIs. The thermal, optical, electrochemical, and charge‐transport properties of the polymers have been investigated. The polymers show broad absorption extending from 300 to 1000 nm with optical band gaps as low as 1.2 eV; the band gap decreases with increasing the conjugation length of donor block, or by replacement of DTT by DTP. The electron affinities of the polymers, estimated from electrochemical data, range from ?3.87 to ?4.01 eV and are slightly affected by the specific choice of donor moiety, while the estimated ionization potentials (?5.31 to ?5.92 eV) are more sensitive to the choice of donor. Bottom‐gate top‐contact organic field‐effect transistors based on the polymers generally exhibit n‐channel behavior with electron mobilities as high as 1.7 × 10^–2 cm²/V/s and on/off ratios as high as 10⁶; one PDI‐DTP polymer is an ambipolar transport material with electron mobility of 4 × 10^–4 cm²/V/s and hole mobility of 4 × 10^–5 cm²/V/s in air. There is considerable variation in the charge transport properties of the polymers with the chemical structures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of a novel one‐pot approach of hyperbranched polyurethanes and their properties

A new method for the synthesis of hyperbranched polymers involving the use of AB_x macromonomers containing linear units have been investigated. Two types of novel hyperbranched polyurethanes have been synthesized by a one‐pot approach. The structures of monomers and polymers were characterized by elemental analysis, ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermogravimetric analysis. The hyperbranched polymers have been proven to be extremely soluble in a wide range of solvents. Polymer electrolytes were prepared with hyperbranched polymer, linear polymer as the host, and lithium perchlorate (LiClO₄) as the ion source. Analysis of the isotherm conductivity dependence of the ion concentration indicated that these hyperbranched polymers could function as a “solvent” for the lithium salt. The conductivity increased with the increasing concentration of hyperbranched polymers in the host polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 344–350, 2002     

Synthesis and photophysics properties of novel bipolar copolymers containing quinoline aluminum moieties and carbazole segments

A novel polymerizable 8-hydroxyquinoline aluminum (Alq₃) complex monomer and its copolymers (Alq₃/N-vinylcarbazole (NVK)) with different mole fractions of Alq₃ in feed were designed and synthesized. The structure of the Alq₃-complex monomer was characterized by ¹H NMR, FT-IR and elemental analysis, and the bipolar copolymers with various desired Alq₃ loading were characterized by ¹H NMR, FT-IR, elemental analysis, and gel permeation chromatography (GPC). The results indicate that these copolymers have moderate molecular weight as well as good solubility in common organic solvent. Thermal properties measurement and analysis show that these copolymers possess excellent thermal stability and high glass transition temperature (T_g). The photophysics properties of the copolymers were studied by UV–vis and fluorescence spectra. Nearly monochromatic yellow–green emission from Alq₃ was observed in high concentration solution and solid state, showing effective energy transfer characteristic. The results demonstrate that introduction of carbazole as hole-transporting and energy transfer group is a potential method to improve the luminescent performance of the Alq₃-based polymers.