偶氮氯膦Ⅲ-KIO4体系阻抑反应动力学光度法测定蛋白质

基于KIO4在H2SO4介质和沸水浴中可氧化偶氮氯膦Ⅲ褪色, 而蛋白质能灵敏地阻抑该氧化褪色反应, 建立了测定痕量蛋白质的新方法. 蛋白质测定范围为0～6 μg/mL, 方法的检出限为2.9×10-10 g/L, 回收率为96%～109%. 测定了动力学参数, 并对反应机理做了研究. 该方法可用于实际样品的测定.     

阻抑动力学光度法测定痕量钛(Ⅳ)

在硫酸和聚乙烯醇溶液中 ,钛 ( )能抑制 Fe( )催化 H2 O2 氧化中性红褪色 ,研究了该反应的最佳条件和动力学参数 ,据此建立了一种测定痕量钛( )的新方法 ,方法检出限为 7.5× 1 0 -2 μg/m L ,测定范围为 0 .0 6～ 0 .60μg/m L,可用于人发中 Ti( )的测定。     

邻苯二酚紫体系催化动力学光度法测定痕量锡(Ⅱ)

基于痕量锡在0.5 mol/L的H2SO4介质中对溴酸钾氧化邻苯二酚紫的褪色反应具有催化作用,建立了一种新的测定痕量锡的催化动力学光度法.确定了该褪色反应的最佳条件:0.5 mol/L H2SO4 1.5 mL;0.1 mol/L KBrO3 1.3 mL;2.0×10-4 mol/L邻苯二酚紫3.5 mL;反应时间为7 min;反应温度为100℃.方法的检出限为4.51×10-3 μg/mL,线性范围为0～3 μg/25 mL.对该方法进行了精密度测定,其相对标准偏差为1.9%.研究了反应的动力学参数,确定了催化反应的的速率方程和表现活化能(Ea=34.10 kJ/mol).该方法可用于水样、人发中痕量锡的测定,相对标准偏差分别为0.32%和1.2%,标准加入回收率分别为99.2%和99.1%.     

催化动力学光度法测定大花红景天中的硒(Ⅳ)

建立了测定大花红景天中硒的一种新的催化动力学光度法.在酸性介质中,硒(Ⅳ)能催化H2O2氧化溴酚蓝-丁基罗丹明B的褪色反应,硒(Ⅳ)含量在0～5 μg/L范围内与褪色反应速率成正比.样品经HNO3-HClO4消化后直接测定硒(Ⅳ)的含量,该方法具有良好的选择性和准确度.用于大花红景天中硒的测定.     

溴酸钾氧化偶氮胂动力学光度法测定钯

根据在稀 H2 SO4 介质中 ,痕量钯 ( )对溴酸钾氧化偶氮胂 褪色反应的显著的催化作用 ,建立了测定痕量钯的催化动力学光度法。方法检出限为 0 .1 3μg/L,测定范围为 0～ 8.0 μg/L。可用于矿石中痕量钯的测定。     

溴酸钾氧化偶氮胂Ⅲ动力学光度法测定钯

根据在稀 H2SO4 介质中,痕量钯(Ⅱ)对溴酸钾氧化偶氮胂Ⅲ褪色反应的显著的催化作用,建立了测定痕量钯的催化动力学光度法。方法检出限为 0.13 μg/L,测定范围为 0～8.0 μg/L。可用于矿石中痕量钯的测定。     

阻抑动力学光度法测定水样中的痕量铋

基于弱酸介质中, 在十二烷基磺酸钠(SDS)存在下, 痕量Bi3 对H2O2氧化结晶紫(CV)的褪色反应有明显的阻抑作用, 建立了测定痕量Bi3 的阻抑动力学光度法, 研究了该反应的最佳实验条件和动力学参数. 结果表明, 该方法检出限为2.77×10-8 g/L, 线性范围为0～0.008 μg/mL. 可用于环境水样中铋的测定.     

催化动力学光度法测定井水中痕量锰

研究了在 NH3· H2 O- NH4 Cl介质中锰催化过氧化氢氧化苋菜红的褪色反应及其动力学条件 ,测定了反应级数和表观活化能 ,建立了测定痕量锰的新方法。该方法的检出限为 2 .7× 1 0 -4 μg/m L Mn,线性范围为 0～ 2 .4μg/2 5m LMn。用于测定井水中痕量 Mn,与原子吸收法的测定结果一致。     

阻抑动力学光度法测定对乙氧基苯胺的研究

在氨水介质中 ,痕量对乙氧基苯胺能灵敏地阻抑 Cu2 +催化过氧化氢氧化茜素红的褪色反应。本文研究了该反应的动力学参数 ,建立了一种测定对乙氧基苯胺的新方法。该法测定对乙氧基苯胺的线性范围为 0 .0～ 1 .0 μg/ 2 5m L,检出限为 8.54×1 0 - 7g/ L。用于环境水样中对乙氧基苯胺的测定 ,获得满意结果     

阻抑动力学光度法测定白鼠肝脏中的超痕量镍(Ⅱ)

在 NH3- H2 O- NH4 Cl介质中 ,超痕量镍 ( )能阻抑 H2 O2 氧化甲基紫褪色的指示反应 ,研究了阻抑褪色反应的最佳条件和动力学参数 ,建立了测定超痕量镍 ( )的新方法。方法检出限为 4.4× 1 0 -11g/m L Ni( ) ,测定范围为 0～1 .0μg/2 5m L。方法已用于测定生物样品中的 Ni( )。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.