Size-dependence enhancement in electrocatalytic activity of NiHCF-gold nanocomposite: potential application in electrochemical sensing

A nanocomposite of nickel hexacyanoferrate (NiHCF) was made with gold nanoparticles (AuNPs) of two different sizes (20 and 80 nm as AuNP(red) and AuNP(blue) respectively), synthesized via 3-glycidoxypropyltrimethoxysilane mediated reduction of 3-aminopropyltrimethoxysilane treated gold chloride and characterized by scanning electron microscopy and UV-VIS spectroscopy. The size of AuNPs was found to influence the two pairs of reversible voltammetric peaks of cation rich and cation deficient NiHCF. Such influence was identified from cyclic voltammetry of nanocomposite modified electrodes and applications during electrochemical sensing of two different analytes hydrazine and glutathione (GSH). Electrochemical sensing of hydrazine was based on cyclic voltammetry and differential pulse voltammetry (DPV) found as a function of sodium deficient NiHCF and was greatly amplified with increasing AuNPs nanogeometry. NiHCF alone is not an efficient electrode material for GSH analysis at the level required, however, the presence of AuNPs introduces size dependent sensitive and selective detection of GSH. GSH sensing based on linear sweep voltammetry (LSV) was found to be mediated by the potassium rich form of NiHCF redox couple in the presence of AuNPs. The results justified electrochemical detection of these analytes based on a mediated mechanism and support the role of AuNPs for facilitated electrochemical activity of NiHCF based systems as a function of nanogeometry.     

Stabilized gold nanoparticles by reduction using 3,4-ethylenedioxythiophene-polystyrenesulfonate in aqueous solutions: nanocomposite formation, stability, and application in catalysis

Herein, we report a one-pot synthesis of highly stable Au nanoparticles (AuNPs) using 3,4-ethylenedioxythiophene (EDOT) as a reductant and polystyrene sulfonate (PSS-) as a dopant for PEDOT and particle stabilizer. The synthesis demonstrated in this work entails the reduction of HAuCl4 using EDOT in the presence of PSS-. The formation of AuNPs with concomitant EDOT oxidation is followed by UV-vis spectroscopy at various time intervals. Absorption at 525 nm is due to the surface plasmon band of AuNPs (violet), and broad absorption above 700 nm is due to oxidized PEDOT that was further characterized to be in its highly oxidized (doped) state, using FT-Raman spectroscopy. Transmission electron microscopy shows a polydisperse nature of the particles, and the selected area electron diffraction pattern reveals the polycrystalline nature of AuNPs. With stabilizers such as sodium dodecylsulfate (SDS) (green) and polyvinylpyrrolidone (PVP) (blue), the absorbance around 525 nm was found to be negligibly small, while PSS- showed high absorbance at 525 nm (violet) and above 700 nm (oxidized PEDOT). PSS- also allows complete oxidation of EDOT and serves as an effective dopant for PEDOT. While AuNPs covered by PEDOT alone cannot be dispersed in aqueous solutions, PSS- renders Au-PEDOT water soluble. The hydrodynamic diameter of the nanocomposite estimated from the dynamic light scattering (DLS) measurements increases in the order Na-PSS < SDS < PVP. Interestingly, the color of the Au(nano)-PEDOT/PSS- aqueous dispersion changed reversibly between violet and blue and vice versa on addition of NaOH and HCl, respectively. This reversible color change appears to be a combination effect of acid/base on the properties of PEDOT, in turn changing the environment around the embedded AuNPs. The nanoparticle dispersion also exhibited very high stability in presence of 3.0 M NaCl. Remarkably, the nanocomposite Au(nano)-PEDOT/PSS- was found to function as an effective catalyst to activate the reduction of 4-nitrophenol to 4-aminophenol in the presence of excess NaBH4, and the calculated apparent rate constant value of 4.39 x 10-2 s-1 is found to be higher than those obtained using other nanocomposites with SDS and PVP and comparable to the values reported in the case of other encapsulants.     

Dual Amplified Electrochemical Immunosensor for Hepatitis B Virus Surface Antigen Detection Using Hemin/G‐Quadruplex Immobilized onto Fe3O4‐AuNPs or (Hemin‐Amino‐rGO‐Au) Nanohybrid

A sensitive electrochemical immunosensor for Hepatitis B virus surface antigen (HBsAg) detection was fabricated based on hemin/G‐quadruplex interlaced onto Fe₃O₄‐AuNPs or hemin ‐amino‐reduced graphene oxide nanocomposite (H‐amino‐rGO‐Au). G‐quadruplex DNAzyme, which is composed of hemin and guanine‐rich nucleic acid, is an effective signal amplified tool for its outstanding peroxidase activity and Fe₃O₄‐AuNPs or (H‐amino‐rGO‐Au) nanocomposites with quasi‐enzyme activity provide appropriate support for the immobilization of hemin/G‐quadruplex. The target protein was sandwiched between the primary antibody immobilized on the GO and secondary antibody immobilized on the Fe₃O₄‐AuNPs or (H‐amino‐rGO‐Au) nanocomposites and glutaraldehyde was used as linking agent for the immobilization of primary antibody on the surface of GO. Both Fe₃O₄‐AuNPs and H‐amino‐rGO‐Au nanocomposite and also hemin/G‐quadruplex can cooperate the electrocatalytic reduction of H₂O₂ in the presence of methylene blue as mediator. The proposed immunosensor has a wide linear dynamic range of 0.1 pg/ml to 300 pg/ml with a detection limit of 60 fg/ml when Fe₃O₄‐AuNPs was used for immobilization of hemin/G‐quadruplex, while the dynamic range and DL were 0. 1–1000 pg/mL and 10 fg/mL, respectively in the presence of H‐amino‐rGO‐ Au nanocomposite as platform for immobilizing of hemin/G‐quadruplex. The proposed immunosensor was also used for analysis of HBsAg in spiked human serum samples with satisfactory results.     

New insights into the structure of PAMAM dendrimer/gold nanoparticle nanocomposites

In this work, we have employed a suite of complementary analytical techniques to shed light on the nanocomposite structures formed during gold nanoparticles (AuNPs) synthesis in the presence of poly(amidoamine) (PAMAM) dendrimers. Nanocomposites of AuNPs and either fourth or eighth generation amine-terminated PAMAM dendrimers (G4 or G8) were prepared. The size distributions of AuNPs and the nanocomposites were determined by transmission electron microscopy. Atomic force microscopy phase imaging and neutral impact collision ion scattering spectroscopy (NICISS) were utilized for the first time to investigate and compare nanocomposite structures formed from G4 and G8. Our results suggest that G4 stabilized the AuNP by capping the AuNP particle surface but that a certain fraction of the gold surface was still barely covered. In contrast, the metal nanoparticle surface was completely covered by G8. In addition, NICISS results provided evidence that nanocomposites deformed when being deposited directly onto a substrate.     

Polymeric nanocomposite comprising gold nanoparticles and bilaterally sulfur‐functionalized polystyrene

Anionic polymerization technique has been utilized to synthesize a bilaterally sulfur‐functionalized polystyrene, SCH3‐polystyrene‐SH. The synthesis scheme consists of (1) initiation of 4‐vinylbenzylmethyl sulfide with sec‐butyllithium to form a living sulfur‐containing initiator, (2) polymerization of styrene, and (3) termination of growing polystyrene chain with ethylene sulfide. The resulting bilaterally sulfur‐functionalized polystyrene is used to make polystyrene/gold nanoparticles (AuNPs) nanocomposite with AuNPs formed in situ in polymer solution through reduction of AuClO₄. The effects of the polymer/Au molar ratio as well as the molecular weight of polymer on the size and dispersion of formed AuNPs have been studied, and the superiority of bilaterally functionalized polymer to unilaterally functionalized polymer has been demonstrated. The polystyrene/AuNPs composite has been characterized by GPC, ¹H‐NMR, ¹³C‐NMR, EDS, TEM, UV‐Vis, and DSC. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1268–1277     

Label-free sandwich type of immunosensor for hepatitis C virus core antigen based on the use of gold nanoparticles on a nanostructured metal oxide surface

We report on the construction of a label-free electrochemical immunosensor for detecting the core antigen of the hepatitis C virus (HCV core antigen). A glassy carbon electrode (GCE) was modified with a nanocomposite made from gold nanoparticles, zirconia nanoparticles and chitosan, and prepared by in situ reduction. The zirconia nanoparticles were first dispersed in chitosan solution, and then AuNPs were prepared in situ on the ZrO₂-chitosan composite. In parallel, a nanocomposite was synthesized from AuNPs, silica nanoparticles and chitosan, and conjugated to a secondary antibody. The properties of the resulting nanocomposites were investigated by UV-visible photometry and transmission electron microscopy, and the stepwise assembly process was characterized by means of cyclic voltammetry and electrochemical impedance spectroscopy. An sandwich type of immunosensor was developed which displays high sensitivity to the HCV core antigen in the concentration range between 2 and 512?ng?mL^?1, with a detection limit of 0.17?ng?mL^?1 (at S/N?=?3). This immunosensor provides an alternative approach towards the diagnosis of HCV.

Amperometric hydrogen peroxide biosensor based on the immobilization of heme proteins on gold nanoparticles-bacteria cellulose nanofibers nanocomposite

A novel matrix, gold nanoparticles-bacterial cellulose nanofibers (Au-BC) nanocomposite was developed for enzyme immobilization and biosensor fabrication due to its unique properties such as satisfying biocompatibility, good conductivity and extensive surface area, which were inherited from both gold nanoparticles (AuNPs) and bacterial cellulose nanofibers (BC). Heme proteins such as horseradish peroxidase (HRP), hemoglobin (Hb) and myoglobin (Mb) were successfully immobilized on the surface of Au-BC nanocomposite modified glassy carbon electrode (GCE). The immobilized heme proteins showed electrocatalytic activities to the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ), which might be due to the fact that heme proteins retained the near-native secondary structures in the Au-BC nanocomposite which was proved by UV-vis and IR spectra. The response of the developed biosensor to H₂O₂ was related to the amount of AuNPs in Au-BC nanocomposite, indicating that the AuNPs in BC network played an important role in the biosensor performance. Under the optimum conditions, the biosensor based on HRP exhibited a fast amperometric response (within 1 s) to H₂O₂, a good linear response over a wide range of concentration from 0.3 μM to 1.00 mM, and a low detection limit of 0.1 μM based on S/N = 3. The high performance of the biosensor made Au-BC nanocomposite superior to other materials as immobilization matrix.     

Zn-MOF模板法制备ZnO/C/SNTs及其药物缓释性能

采用超声法一步合成了SiO₂包覆金属-有机骨架[Zn₆(OH)₃(BTC)₃(H₂O)₃] ·7H₂O(Zn-MOF, BTC=1,3,5-均苯三羧酸根)纳米晶, 在N₂保护下, 热解Zn-MOF@SiO₂获得了ZnO/C/SNTs复合物, 进而与布洛芬(HIBU)反应合成药物组装体Zn(IBU)₂/C/SNTs. 通过透射电子显微镜(TEM)、 傅里叶变换红外光谱仪(FTIR)、 高分辨透射电子显微镜(HRTEM)和X射线衍射仪(XRD)对样品的结构和形貌进行表征. 结果显示, Zn-MOF@SiO₂呈棒状, 具有清晰的核/壳结构, 形貌单一, 分散性良好. 煅烧后SNTs结构稳定, 形貌基本不变. 载药实验表明, 药物组装体的载药量为752 mg/g, 并具有良好的pH响应性能.     

基于聚苯胺纳米纤维复合膜界面构建电化学细胞传感器及其对癌细胞的识别检测

合成了聚苯胺纳米纤维,直径在50～70 nm之间;基于静电作用构建聚苯胺纳米纤维-纳米金复合膜界面,并在此界面上层层组装修饰叶酸分子,构建叶酸功能化传感界面,基于叶酸分子与癌细胞表面过量表达的叶酸受体之间的特异性识别作用,将此传感界面应用于对癌细胞的识别和捕获。结果表明:叶酸功能化传感界面能够特异性识别和捕获叶酸受体过量表达的癌细胞。采用电化学阻抗技术,以HeLa细胞为模型,应用于对癌细胞的识别和检测,细胞在1.0×104～6.4×106cells/mL浓度范围内与阻抗变化值ΔRct呈良好的线性关系;检出限为2000 cells/mL。本方法简单、快速灵敏、重现性和稳定性良好;制备的传感器可以再生使用。     

基于AuNPs/PDDA-GO纳米复合物的电化学免疫传感器的构建及对SirT1蛋白的检测

基于AuNPs/PDDA-GO纳米复合物制备了一种新型电化学免疫传感器, 并将其用于SirT1的检测. 首先, 在电极表面修饰复合材料AuNPs/PDDA-GO, 然后将目标蛋白SirT1固定到修饰了AuNPs/PDDA-GO的电极表面, 再通过特异性免疫反应结合一抗(Ab₁)和辣根过氧化酶标记的二抗分子(HRP-Ab₂), 最后用示差脉冲伏安法检测电流信号, 实现了对SirT1蛋白水平的测定. 在优化的实验条件下, SirT1蛋白的浓度在0.1~100 ng/mL范围内与响应电流呈良好线性关系, 检出限为0.029 ng/mL.     

Synergetic signal amplification based on electrochemical reduced graphene oxide-ferrocene derivative hybrid and gold nanoparticles as an ultra-sensitive detection platform for bisphenol A

In this paper, a novel electro-active graphene oxide (GO) nanocomposite was firstly prepared by covalently grafted (4-ferrocenylethyne) phenylamine (Fc-NH₂) onto the surface of GO. The synthesized hybridized nanocomposite of GO-Fc-NH₂ coupled with HAuCl₄ simultaneously electrodeposited on the glassy carbon electrodes (GCE) to obtain rGO-Fc-NH₂/AuNPs/GCE. The covalently grafted material of the rGO-Fc-NH₂/AuNPs film can effectively prevent the electron mediator leaking from the electrode surface, which can hold the advantage of both the nanomaterials and electron mediator. By employing the catalysis effect of the nanomaterial and electron mediator coupling with large active surface area and high accumulation capacity of rGO-Fc-NH₂/AuNPs, a synergetic signal amplification platform for ultra-sensitive detection of bisphenol A (BPA) was successfully established. With this novel sensor, the oxidation peak currents of BPA were linearly dependent on the BPA concentrations in the range of 0.005–10 μM with the detection limit of 2 nM. Modification of electron mediators on nanomaterials can greatly enhance the electrochemical performance of the sensors and will provide a new concept for fabricating newly electro-active nanomaterials-based electrochemical biosensors.     

Nanocomposites of gold nanoparticles with pregabalin: The future anti-seizure drug

Application of nanoparticles in drug delivery has become an emerging phenomenon. This is typically achieved either via custom made nanoparticles or through the functionalization of pre-synthesized nanoparticles with the pharmaceutically active ingredients. In this study, Pregabalin, which is the active pharmaceutical ingredient of commercially available drug Lyrica, is used to functionalize pre-synthesized gold nanoparticles (AuNPs). The work was divided into two parts. The first part determined by synthesis of AuNPs. The second part was achieving conjugation of the AuNPs with Pregabalin to obtain nanocomposites (AuNPs-PGN). AuNPs formed were nanosized, spherical in shape, with a particle size ~35 nm. The probable nanocomposite formation takes place by conjugation between AuNPs and the carboxyl group (COOH) of Pregabalin.     

Comparative study of amphiphilic hyperbranched and linear polymer stabilized organo‐soluble gold nanoparticles as efficient recyclable catalysts in the biphasic reduction of 4‐nitrophenol

A series of organo‐soluble spherical gold nanoparticles (AuNPs) were prepared through the reduction of HAuCl₄ by NaBH₄ in the presence of amphiphilic hyperbranched polymers that had a hydrophilic hyperbranched polyethylenimine core and a hydrophobic shell formed by many palmitamide (C16) chains. For comparison, the corresponding linear polymeric analog derived from linear polyethylenimine was also used to prepare the organo‐soluble AuNPs. The obtained AuNPs were characterized by transmission electron microscopy. It was found that higher feed ratio of polymer to HAuCl₄ and utilization of polymers with higher C16 density usually resulted in smaller AuNPs with relatively lower polydispersity. Except of the polymer having the pronounced low molecular weight, the molecular weight and the morphology of the amphiphilic polymers had almost no obvious effect on the size of the formed AuNPs. These organo‐soluble AuNPs could be used as efficient catalysts for the biphasic catalytic reduction of 4‐nitrophenol by NaBH₄. Their apparent rate coefficients had correlation with the molecular weight of the used amphiphilic polymers, but were less relevant to the morphology of these polymers. These organo‐soluble AuNPs could be conveniently recovered and reused many times. The morphology of the capping polymers had obvious effect on the lifetime of the AuNPs catalysts in the catalytic reduction of 4‐nitrophenol. Except of the pronounced low molecular weight hyperbranched polymer, the other hyperbranched ones with relatively high molecular weight rendered the AuNPs to have bigger turnover number values than their linear analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Controlled gold nanoparticle diffusion in nanotubes: Platfom of partial functionalization and gold capping

Multifunctionality of nanotubes (NTs) is essential in biomedical and biotechnological applications, such as drug/gene delivery, bioseparation, and single-molecule detection. Each functionality should be located at optimal positions, depending on their roles such as targeting, tracking, and transporting. This enables avoidance of possible malfunctions or interference caused by having randomly distributed multiple groups (e.g., hydrophobic and hydrophilic) in the same space. In the aspect of multifunctionality, however, a general selective partial functionalization method of NT inner surfaces still remains a challenge. For this reason, we investigated a selective partial functionalization method of NTs using controlled gold nanoparticle (Au NP) diffusion in nanotubes and the preparation method of Au-capped silica nanotubes. Silica nanotubes (SNTs) were prepared using template sol-gel synthesis, and the inside of SNT was selectively modified with (3-trimethoxysilylpropyl) diethylenetriamine (DETA-silane). Au NPs of 2-nm size were then incubated with SNTs with DETA layer inside. Spontaneous diffusion of negatively charged Au NPs from bulk into the positively charged nanochannels of SNTs led trapped Au NPs onto the inner surface of SNTs. The degree of functionalization was controlled by the channel diameter, Au NP concentration, and solvent type. These SNTs partially modified with Au NPs were then used for localized selective chemical functionalization of SNTs. This was accomplished by the reaction between thionylated Au NPs trapped on the inside of SNTs and Alexa555-maleimide. Au-capped SNTs were prepared from SNTs with Au NPs inside by seed-mediated gold growth.     

Pressure-responsive AuNPs/Polyacrylamide Nanocomposite Hydrogel with Highly Stable and Tunable Electrochemiluminescence Performances

Synergistically taking the advantage of distinctive porous matrix, luminophore and functional nanoparticles, we prepared functional nanocomposite hydrogel combining the hydrophilic three-dimensional network of hydrogels as matrix for the adsorption of luminophore, Ru(bpy)₃²⁺, and in situ grown gold nanoparticles (AuNPs) as the conductive. Interestingly, the designed nanocomposite hydrogel shows external pressure resposnsive properties, which precisely tune the distance between the AuNPs becomes shorter, resulting in a remarkable amplification of electrochemiluminescence (ECL) signals. Additionally, differing from the poor stability of conventional ECL, uniform dispersion of the Ru(bpy)₃²⁺ over nanocomposite hydrogel significantly enhanced the long term stability of ECL.     

Designing and fabrication of a novel gold nanocomposite structure: application in electrochemical sensing of bisphenol A

In this article, a highly sensitive electrochemical sensor is introduced for direct electro-oxidation of bisphenol A (BPA). The novel nanocomposite was prepared based on multi-walled carbon nanotube/thiol functionalised magnetic nanoparticles (Fe₃O₄-SH) as an immobilisation platform and gold nanoparticles (AuNPs) as an amplifying electrochemical signal. The chemisorbed AuNPs exhibited excellent electrochemical activity for the detection of BPA. Some analysing techniques such as Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and energy-dispersive x-ray diffraction exposed the formation of nanocomposite. Under optimum conditions (pH 9), the sensor showed a linear range between 0.002–240 μM, with high sensitivity (0.25 μA μM^?1) along with low detection limit (6.73 × 10^?10 M). Moreover, nanocomposites could efficiently decrease the effect of interfering agents and remarkably enhance the utility of sensor at detection of BPA in some real samples.     

Stripping Analysis of As(III) by Means of Screen‐Printed Electrodes Modified with Gold Nanoparticles and Carbon Black Nanocomposite

A novel sensor based on carbon black‐gold nanoparticle nanocomposite modified screen‐printed electrode (CB‐AuNPs/SPE) for the detection of As(III) has been developed. The sensor was prepared modifying the SPE with CB and AuNPs by a drop casting automatable deposition. The As(III) was detected by CB‐AuNPs/SPE using anodic stripping voltammetry, with a high sensitivity (673±6 µA µM^?1 cm^?2) and reaching a LOD of 0.4 ppb. Finally, CB‐AuNPs/SPE has been applied to As(III) trace analysis in drinking water, obtaining satisfactory recovery values (99±9 %).     

Catalytic reduction of 4-nitrophenol using biogenic gold and silver nanoparticles derived from Breynia rhamnoides

A simple, green method is described for the synthesis of Gold (Au) and Silver (Ag) nanoparticles (NPs) from the stem extract of Breynia rhamnoides. Unlike other biological methods for NP synthesis, the uniqueness of our method lies in its fast synthesis rates (~7 min for AuNPs) and the ability to tune the nanoparticle size (and subsequently their catalytic activity) via the extract concentration used in the experiment. The phenolic glycosides and reducing sugars present in the extract are largely responsible for the rapid reduction rates of Au(3+) ions to AuNPs. Efficient reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of AuNPs (or AgNPs) and NaBH(4) was observed and was found to depend upon the nanoparticle size or the stem extract concentration used for synthesis.     

Colorimetric aptamer based assay for the determination of fluoroquinolones by triggering the reduction-catalyzing activity of gold nanoparticles

The authors describe a colorimetric assay for the detection of fluoroquinolones (FQs). It is based on the use of gold nanoparticles (AuNPs) modified with complementary DNA strands and analyte-specific FQ-binding aptamers. The modified AuNPs possess enzyme-like activity that can catalyze the reduction of nitrophenol by NaBH₄. In the absence of ciprofloxacin, the flower-shape coating on the AuNPs prevents the reduction of yellow 4-nitrophenol. In the presence of ciprofloxacin, the DNA/aptamer flower leaves on the AuNPs and the AuNPs can exert their catalytic activity. This results in a color change from yellow to colorless. The assay is highly selective for FQs, fast (1 h), and has a limit of detection as low as 1.2 nM in case of ciprofloxacin. It was successfully applied to the determination of ciprofloxacin in spiked water, serum and milk samples to give LODs of 1.3, 2.6 and 3.2 nM, respectively.     

Biogenic Synthesis of Gold Nanoparticles on a Green Support as a Reusable Catalyst for the Hydrogenation of Nitroarene and Quinoline

Direct attachment of gold nanoparticles to a green support without the use of an external reducing agent and using it for removing toxic pollutants from wastewater, i. e., reduction of nitroarene to amine, are described. A novel approach involving the reduction of gold by the jute plant (Corchorus genus) stem-based (JPS) support itself to form nanoparticles (AuNPs) to be used as a catalytic system (‘dip-catalyst’) and its catalytic activity for the hydrogenation of series of nitroarenes in aqueous media are presented. AuNPs/JPS catalyst was characterized using SEM, UV-Vis, FTIR, TEM, XPS, and ICP-OES. Confined area elemental mapping exhibits uniform and homogeneous distribution of AuNPs on the support surface. TEM shows multi-faceted AuNPs in the range of 20–30 nm. The reactivity of AuNPs/JPS for the transfer hydrogenation of nitroarene as well as hydrogenation of quinoline under molecular H₂ pressure was evaluated. Sodium borohydride, when used as the hydrogen source, demonstrates a high catalytic efficiency in the transfer hydrogenation reduction of 4-nitrophenol (4-NP). Quinoline is quantitatively and chemoselectively hydrogenated to 1,2,3,4-tetrahydroquinoline (py-THQ) using molecular hydrogen. Reusability studies show that AuNPs are stable on the support surface and their selectivity is not affected.