Formation of ordered self-assembled monolayers by adsorption of octylthiocyanates on Au(111)

Self-assembled monolayers (SAMs) were formed by the spontaneous adsorption of octythiocyanate (OTC) on Au(111) using both solution and ambient-pressure vapor deposition methods at room temperature and 50 degrees C. The surface structures and adsorption characteristics of the OTC SAMs on Au(111) were characterized by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). The STM observation showed that OTC SAMs formed in solution at room temperature have unique surface structures including the formation of ordered and disordered domains, vacancy islands, and structural defects. Moreover, we revealed for the first time that the adsorption of OTC on Au(111) in solution at 50 degrees C led to the formation of SAMs containing small ordered domains, whereas the SAMs formed by vapor deposition at 50 degrees C had long-range ordered domains, which can be described as (radical3 x 2 radical19)R5 degrees structures. XPS measurements of the peaks in the S 2p and N 1s regions for the OTC SAMs showed that vapor deposition is the more effective method as compared to solution deposition for obtaining high-quality SAMs by adsorption of OTC on gold. The results obtained will be very useful in understanding the SAM formation of organic thiocyanates on gold surfaces.     

β-联碳酰基类衍生物有序自组装膜的STM研究

在大气条件下, 利用扫描隧道显微镜研究了四个β-联碳酰基类衍生物在高定向裂解石墨(HOPG)表面的自组装结构. 研究分子的结构中均包含π电子共轭体系和烷基链. 实验研究了分子结构对自组装结构的影响, 并利用分子结构的变化实现了自组装膜结构的调控. 结果表明, 在甲苯溶剂中制备的这些自组装结构均长程有序, 分子间氢键和偶极相互作用是影响自组装膜结构变化的重要因素.     

Self-assembly of normal alkanes on the Au (111) surfaces

The self-assembled monolayers (SAMs) of normal alkanes (n-C(n)H(2n+2)) with different carbon chain lengths (n=14-38) in the interfaces between alkane solutions (or liquids), and the reconstructed Au (111) surfaces have been systematically studied by means of scanning tunneling microscopy (STM). In contrast to previous studies, which concluded that some n-alkanes (n=18-26) can not form well-ordered structures on Au (111) surfaces, we observed SAM formations for all these n-alkanes without any exceptions. We find that gold reconstruction plays a critical role in the SAM formation. The alkane monolayers adopt a lamellar structure in which the alkane molecules are packed side-by-side, to form commensurate structures with respect to the reconstructed Au (111) surfaces. The carbon skeletons are found to lie flat on the surfaces, which is consistent with the infrared spectroscopic studies. Interestingly, we find that two-dimensional chiral lamellar structures form for alkanes with an even carbon number due to the specific packing of alkane molecules in a tilted lamella. Furthermore, we find that the orientation of alkane molecules deviates from the exact [011] direction, because of the intermolecular interactions among the terminal methyl groups of neighboring lamellae; this results in differences of molecular orientation between mirror structures of adjacent zigzag alkane lamellae. Structural models have been proposed, that shed new light on monolayer formation.     

Significance of local density of states in the scanning tunneling microscopy imaging of alkanethiol self-assembled monolayers

A systematic scanning tunneling microscopy (STM) study of alkanethiol self-assembled monolayers (SAMs) is presented as a function of the bias voltage, tunneling current, and tip-termini separation. Stable and etch-pit free SAMs of close-packed undecanethiol/Au(111) were obtained after annealing in ultrahigh vacuum. STM revealed two distinct c(4x2) structures with four nonequivalent molecules per unit cell. For both structures, reversible contrast variations occur upon systematically tuning the bias voltage, the current, and the tip-termini distance. These contrast transitions originate from probing the corresponding local density of states (LDOS) of each molecule and not from the reorientation of the alkanethiol chains. The STM contrast is particularly sensitive to the tip-termini separation in the range of 0.5-2.5 A, reflecting the distance-dependence of LDOS. At a fixed tip elevation, the STM contrast is less sensitive to changes in bias within 0.1-1.2 V. For the first time, we demonstrate that LDOS may override the physical height variations in the STM topographic contrast for alkanethiol SAM systems.     

Comprehensive investigation of self-assembled monolayer formation on ferromagnetic thin film surfaces

We report a simple, universal method for forming high surface coverage SAMs on ferromagnetic thin (< or =100 nm) films of Ni, Co, and Fe. Unlike previous reports, our technique is broadly applicable to different types of SAMs and surface types. Our data constitutes the first comprehensive examination of SAM formation on three different ferromagnetic surface types using two different surface-binding chemistries (thiol and isocyanide) under three different preparation conditions: (1) SAM formation on electroreduced films using a newly developed electroreduction approach, (2) SAM formation on freshly evaporated surfaces in the glovebox, and (3) SAM formation on films exposed to atmospheric conditions beforehand. The extent of SAM formation for all three conditions was probed by cyclic voltammetry for surfaces functionalized with either (11-thiolundecyl)ferrocene (Fc-(CH2) 11-SH) or (11-isocyanoundecyl)ferrocene (Fc-(CH2) 11-NC). SAM formation was also probed for straight-chain molecules, hexadecanethiol and hexadecaneisocyanide, with contact angle measurements, X-ray photoelectron spectroscopy, and reflection-absorption infrared spectroscopy (RAIRS). The results show that high surface coverage SAMs with low surface-oxide content can be achieved for thin, evaporated Ni and Co films using our electroreduction process with thiols. The extent of SAM formation on electroreduced films is comparable to what has been observed for SAMs/Au and to what we observe for SAMs/Ni, Co, and Fe samples prepared in the glovebox.     

Disorder-order phase change of omega-(N-pyrrolyl)alkanethiol self-assembled monolayers on gold induced by STM scans and thermal activation

Molecular ordering of pyrrolyl-terminated alkanethiol self-assembled monolayers (PyC(n)SH SAMs) on Au(111) substrates (n = 11 or 12) was investigated by scanning tunneling microscopy (STM) and various spectroscopic methods. The SAMs, which were in a disordered state when formed at room temperature, could be ordered either globally by thermal annealing at 70 degrees C, or locally via stimulation with repetitive STM scans. The ordered phase was characterized by small domains of molecular rows formed along 112[combining macron] directional set with an inter-row corrugation period close to 1.44 nm, in which defects were abundant. Based on the experimental results, the molecular arrangement in the ordered PyC(n)SH SAM was proposed to be a (5x radical3)rect structure with a molecular deficiency >or=10%. While mechanical interactions between molecules and scanning probe tips had been pointed out as the major cause of scan-induced phase transformations in other SAM systems, electronic or electrostatic factors were thought to affect considerably the scan-induced ordering process in this SAM system. From comparison of surface molecular coverage between disordered and thermally ordered SAMs of PyC(12)SH, it was inferred that the disorder could be ascribed to both kinetic and thermodynamic factors. The kinetic barrier to the ordered phase was supposed to result from strong dipole-dipole interactions among the pyrrolyl endgroups.     

Mixed self-assembled monolayers of semirigid tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes)

Single-component and mixed self-assembled monolayers (SAMs) of one- and three-ring semirigid tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes)-that is, thiopyran (1), 4-(4-cyclohexylidene-cyclohexylidene)tetrahydro-4H-thiopyran (2), and 4-(tetrahydro-4H-thiopyran-4-cyclohexylidene-4'-ylidene)tetrahydro-4H-thiopyran (3)--on Au(111) substrates have been prepared and studied by cyclic voltammetry (CV), atomic force microscopy (AFM), and scanning tunneling microscopy (STM). It was found that the shortest adsorbate 1 more readily forms a SAM than 2 or 3. Notwithstanding, the SAMs of 2 or 3 are thermodynamically more stable due to favorable intermolecular attractions. Holes were made with the AFM tip establishing tilt angles of 30-50 degrees with respect to the surface normal for all SAMs. STM imaging showed well-ordered, line-shaped packing patterns with molecular resolution for the SAM of 2. Similar patterned structures were not observed for 1 and 3. Mixed SAMs were prepared by exposing a SAM of 1 to ethanol solutions of either 2 or 3. STM imaging revealed that domains of molecules of 2 or 3 amidst a monolayer of 1 are formed in both cases. Whereas in the mixed SAM of 1 and 2 the domains are irregularly shaped, circular islands of uniform size are found in the mixed SAM of 1 and 3.     

Standing up versus looping over: controlling the geometry of self-assembled monolayers of α,ω-diynes on gold

It is shown that self-assembled monolayers (SAMs) composed of α,ω-diynes on gold have different structures depending on the concentration of molecules used to make the SAM. Evidence for both hairpinned and standing-up molecules is provided. This behavior is in contrast to SAMs of α,ω-dithiols on gold, which generally form SAMs with only the straight conformation. The looped SAMs composed of α,ω-diynes offer a less densely packed and thus somewhat accessible surface that may be useful when the underlying surface is used as an electrode. Furthermore, biasing the structure of the molecules in the SAM between looped and standing-up may be useful in the design of dynamic surfaces.     

Amino-carboxylic recognition on surfaces: from 2D to 2D + 1 nano-architectures

The control of the electronic properties of the interfaces between small organic molecules and the substrate is key for the development of efficient and reliable organic-based devices. A promising and widely covered route is to interpose a Self-Assembled Monolayer (SAM) to bridge the molecular film and the electrode. The morphology and the electronic level alignment of the triple substrate-SAM-organic layered system can be tuned by properly selecting the SAM composition. We have recently proposed a novel approach to the problem where, under ultra-high vacuum conditions, a molecular film is anchored to the SAM by exploiting the recognition between molecules functionalized, respectively, with -NH(2) and -COOH end-groups. Here we briefly review the role of the amino-carboxylic interaction in the formation of ordered organic 2-dimensional architectures on solid surfaces. We then describe the anchoring process of carboxylic molecules on amine based SAMs we have recently reported on. New results are presented showing how multiple anchoring sites per molecule may be exploited for tailoring the molecular orientation as well as the density of the anchored molecules.     

Atomic‐Level Elucidation of the Initial Stages of Self‐Assembled Monolayer Metallization and Nanoparticle Formation

The development of high‐performance molecular electronics and nanotech applications requires deep understanding of atomic level structural, electronic, and magnetic properties of electrode/molecular interfaces. Recent electrochemical experiments on self‐assembled monolayers (SAMs) have identified highly practical means to generate nanoparticles and metal monolayers suspended above substrate surfaces through SAM metallizations. A rational basis why this process is even possible is not yet well‐understood. To clarify the initial stages of interface formation during SAM metallization, we used first‐principles spin‐polarized density functional theory (DFT) calculations to study Pd diffusion on top of 4‐mercaptopyridine (4MP) SAMs on Au(111). After distinguishing potential‐energy surfaces (PESs) for different spin configurations for transition metal atoms on the SAM, we find adatom diffusion is not possible over the clean 4MP–SAM surface. Pre‐adsorption of transition‐metal atoms, however, facilitates atomic diffusion that appears to explain multiple reports on experimentally observed island and monolayer formation on top of SAMs. Furthermore, these diffusions most likely occur by moving across low‐lying and intersecting PESs of different spin states, opening the possibility of magnetic control over these systems. Vertical diffusion processes were also investigated, and the electrolyte was found to play a key role in preventing metal permeation through the SAM to the substrate.     

Control of alkanethiolate monolayer structure using vapor-phase annealing

We describe an annealing procedure for self-assembled monolayers (SAMs) that uses vapor-phase molecules to modify the local domain structure. Existing SAMs of decanethiolate on Au{111} were annealed using vapor-phase dodecanethiol molecules, so that the original and newly introduced molecules could be distinguished using scanning tunneling microscopy (STM). Molecules deposited from the vapor phase inserted at existing monolayer defect sites and domain boundaries, and at substrate step edges forming discrete network-like domains. The SAM molecular lattice can be preserved across molecular terrace boundaries between the decanethiolate and dodecanethiolate domains. Candidate molecular electronic component molecules were inserted from solution in the decanethiolate matrix as isolated molecules. These inserted molecules could then be surrounded by dodecanethiolate molecules introduced from the vapor phase, thus demonstrating a method for controlling the local environment of inserted molecules.     

Reaction of 5-40 eV ions with self-assembled monolayers

The reaction of 5-40 eV O(+) and Ne(+) ions with alkanethiolate and semifluorinated alkanethiolate self-assembled monolayers (SAMs) is studied under ultrahigh vacuum (UHV) conditions. Whereas Ne(+) simply sputters fragments from the surface, O(+) can also abstract surface atoms and break C-C bonds in both the hydrocarbon and fluorocarbon SAM chains. Isotopic labeling experiments reveal that O(+) initially abstracts hydrogen atoms from the outermost two carbon atoms on an alkanethiolate SAM chain. However, the position of the isotopic label quickly becomes scrambled along the chain as the SAM is damaged through continuous ion bombardment. Scanning tunneling microscopy (STM) monitors changes in the SAM conformational structure at various stages during 5 eV ion bombardment. STM images indicate that O(+) reacts less efficiently with dodecanethiolate molecules packed internally within a structural domain than it does with molecules adsorbed at domain boundaries or near defect sites. STM images recorded after Ne(+) bombardment suggest that Ne(+) attacks the SAM exclusively near the domain boundaries. Taken collectively, these experiments advance our understanding of the degradation pathways suffered by polymeric satellite materials in the low-earth orbit (LEO) space environment.     

Understanding the nonfouling mechanism of surfaces through molecular simulations of sugar-based self-assembled monolayers

This paper presents a molecular simulation study of the interactions of a protein (lysozyme) with self-assembled monolayers (SAMs) of mannitol and sorbitol terminated alkanethiols in the presence of explicit water molecules and ions. The all-atom simulations were performed to calculate the force generated on the protein as a function of its distance above the SAM surfaces. The structural and dynamic properties of water molecules both above the SAM surfaces and around the SAM head groups were analyzed to provide a better understanding of the nonfouling behavior of the sugar-based SAM surfaces. Results from this work suggest that both mannitol and sorbitol SAMs generate a tightly bound, structured water layer around the SAM chains. This hydration layer creates a repulsive force on the protein when it approaches the surface, resulting in a nonfouling surface despite the presence of hydrogen-bond donor groups. This work demonstrates the importance of strong surface-water interactions for surface resistance to nonspecific protein adsorption.     

Molecular tilting and its impact on frictional properties of n-alkane self-assembled monolayers

Hydrophobic, methyl-terminated self-assembled monolayer (SAM) surfaces can be used to reduce friction. Among methyl-terminated SAMs, the frictional properties of alkanethiol SAMs and silane SAMs have been well-studied. In this research, we investigated friction of methyl-terminated n-hexatriacontane (C36) SAM and compared its friction properties with the alkanethiol and silane SAMs. Alkane SAM does not have an anchoring group. The alkane molecules stand on the surface by physical adsorption, which leads to a higher surface mobility of alkane molecules. We found that C36 SAM has a higher coefficient of friction than that of octadecyltrichlorosilane (OTS) silane. When an atomic force microscope (AFM) tip was swiped across the alkane SAM with a loading force, we found that the alkane SAM can withstand the tip loading pressure up to 0.48 GPa. Between 0.48 and 0.49Ga, the AFM tip partially penetrated the SAM. When the tip moved away, the deformed SAM healed and maintained the structural integrity. When the loading pressure was higher than 0.49 GPa, the alkane SAM was shaved into small pieces by the tip. In addition, we found that the molecular tilting of C36 molecules interacted with the tribological properties of the alkane SAM surface. On one hand, a higher loading force can push the rod-like alkane molecules to a higher tilting angle; on the other hand, a higher molecular tilting leads to a lower friction surface.     

Microscopic wetting of self-assembled monolayers with different surfaces: a combined molecular dynamics and quantum mechanics study

Molecular dynamics simulations are used to study the micronature of the organization of water molecules on the flat surface of well-ordered self-assembled monolayers (SAMs) of 18-carbon alkanethiolate chains bound to a silicon (111) substrate. Six different headgroups (-CH(3), -C═C, -OCH(3), -CN, -NH(2), -COOH) are used to tune the character of the surface from hydrophobic to hydrophilic, while the level of hydration is consistent on all six SAM surfaces. Quantum mechanics calculations are employed to optimize each alkyl chain of the different SAMs with one water molecule and to investigate changes in the configuration of each headgroup under hydration. We report the changes of the structure of the six SAMs with different surfaces in the presence of water, and the area of the wetted surface of each SAM, depending on the terminal group. Our results suggest that a corrugated and hydrophobic surface will be formed if the headgroups of SAM surface are not able to form H-bonds either with water molecules or between adjacent groups. In contrast, the formation of hydrogen bonds not only among polar heads but also between polar heads and water may enhance the SAM surface hydrophilicity and corrugation. We explicitly discuss the micromechanisms for the hydration of three hydrophilic SAM (CN-, NH(2)- and COOH-terminated) surfaces, which is helpful to superhydrophilic surface design of SAM in biomimetic materials.     

Assembled monolayers of Mo3S4(4+) clusters on well-defined surfaces

A class of inorganic monolayers formed by assembling the molybdenum-sulfur cluster, Mo3S4(4+), onto a well-defined Au(111) surface is presented. The monolayers have been comprehensively characterized by electrochemistry, X-ray photoelectron spectroscopy (XPS), and in situ scanning tunneling microscopy (in situ STM). The voltammetric data show strong reductive and oxidative desorption signals from Au-S interactions, supported by the presence of both S and Mo signals in XPS. In situ STM shows many small pits in the dense adlayers uniformly spread over the surface, which is a typical feature of self-assembled monolayers (SAMs) of alkanethiols. The density of the pits is ca. 23 (+/-5)% and is significantly higher than for straight-chain alkanethiol SAMs with a single -SH group. The pit shapes are irregular, suggesting multiple Au-S interactions from Mo3S4(4+). High resolution images disclose bright round spots of ca. 8 A diameter representing individual molecules in the SAM. This is the first example of in situ monolayer formation by a metal-chalcogenide cluster directly anchored onto the gold surface through core ligands and offers a simple way to prepare a new class of functionalized inorganic monolayers.     

Odd-even variations in the wettability of n-alkanethiolate monolayers on gold by water and hexadecane: a molecular dynamics simulation study

Molecular dynamics (MD) simulations were performed to investigate odd-even chain length dependencies in the wetting properties of self-assembled monolayers (SAMs) of n-alkanethiols [CH3(CH2)n-1SH] on gold by water and hexadecane. Experimentally, the contact angle of hexadecane on the SAMs depends on whether n is odd or even, while contact angles for water show no odd-even dependence. Our MD simulations of this system included a microscopic droplet of either 256 water molecules or 60 hexadecane molecules localized on an n-alkanethiolate SAM on gold with either an even or odd chain length. Contact angles calculated for these nanoscopic droplets were consistent with experimentally observed macroscopic trends in wettability, namely, that hexadecane is sensitive to structural differences between odd- and even-chained SAMs while water is not. Structural properties for the SAMs (including features such as chain tilt, chain twist, and terminal methyl group tilt) were calculated during the MD simulations and used to generate IR spectra of these films that compared favorably with experimental spectra. MD simulations of SAMs in contact with slabs of water and hexadecane revealed that the effects of these solvents on the structure of the SAM was restricted to the chain terminus and had no effect on the inner structure of the SAM. The density profiles for water and hexadecane on the SAMs were different in that water displayed a significant depletion in its density at the liquid/SAM interface from its bulk value, while no such depletion occurred for hexadecane. This difference in contact may explain the lack of an odd-even variation in the wetting characteristics of water on these surfaces, because the water molecules are positioned further away from the surface and, therefore, are not sensitive to the structural differences in the average orientations for the terminal methyl groups in odd- and even-chained SAMs. In contrast, the differences in the wetting properties of hexadecane on the odd- and even-chained SAMs may reflect the closer proximity of these molecules to the SAM surface and a resulting greater sensitivity to the differences in the terminal methyl group orientations in the SAMs. SAM-solvent interaction energies were calculated during the MD simulations, yielding interaction energies that differed on the even- and odd-chained surfaces by approximately 10% for hexadecane and negligibly for water, in accord with estimates using experimental wetting results.     

Interfacial energy exchange and reaction dynamics in collisions of gases on model organic surfaces

Molecular beam scattering experiments and molecular dynamics simulations have been combined to develop an atomic-level understanding of energy transfer, accommodation, and reactions during collisions between gases and model organic surfaces. The work highlighted in this progress report has been motivated by the scientific importance of understanding fundamental interfacial chemical reactions and the relevance of reactions on organic surfaces to many areas of environmental chemistry. The experimental investigations have been accomplished by molecular beam scattering from ω-functionalized self-assembled monolayers (SAMs) on gold. Molecular beams provide a source of reactant molecules with precisely characterized collision energy and flux; SAMs afford control over the order, structure, and chemical nature of the surface. The details of molecular motion that affect energy exchange and scattering have been elucidated through classical-trajectory simulations of the experimental data using potential energy surfaces derived from ab initio calculations. Our investigations began by employing rare-gas scattering to explore how alkanethiol chain length and packing density, terminal group relative mass, orientation, and chemical functionality influence energy transfer and accommodation at organic surfaces. Subsequent studies of small molecule scattering dynamics provided insight into the influence of internal energy, molecular orientation, and gas–surface attractive forces in interfacial energy exchange. Building on the understanding of scattering dynamics in non-reactive systems, our work has recently explored the reaction probabilities and mechanisms for O₃ and atomic fluorine in collisions with a variety of functionalized SAM surfaces. Together, this body of work has helped construct a more comprehensive understanding of reaction dynamics at organic surfaces.     

Time-dependent organization and wettability of decanethiol self-assembled monolayer on Au(111) investigated with STM

A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.     

Physical structure of standing-up aromatic SAMs revealed by scanning tunneling microscopy

Long-range-ordered aromatic SAMs are formed on Au(111) using 4-nitrophenyl sulfenyl chloride as a precursor. Although the main structure is a √3 × √3 with a molecular density similar to that usually found for aliphatic SAMs, particular spots presenting specific shapes are also observed by STM. These include hexagons, partial hexagons, parallelograms, and zigzags resulting from specific arrangements of adsorbed molecules. These molecular arrangements are reversible as they form and dissociate or "vanish" in various areas on the surface. STM shows that these particular structures provide some order to their surrounding because areas void of these structures look less ordered. More interestingly, STM shows submolecular details of the molecules involved in forming these structures, hence providing direct experimental evidence for the ability of the STM to provide physical structure information of standing up SAMs. This is indeed a heavily debated question, and this work reports the first experimental example where submolecular physical structure is revealed by STM for standing-up SAMs.