界面及热残余应力对超磁致伸缩复合材料有效性能的影响

本文基于Mori-Tanaka理论，考虑了界面相对超磁致伸缩复合材料的有效性能的影响，得到了具有界面相的超磁致伸缩复合材料的有效性能的一般解析表达。考虑到固化过程中热残余应力对超磁致伸缩复合材料有效性能的影响，通过数值计算，给出超磁致伸缩复合材料有效弹性模量、有效磁致伸缩应变及有效热膨胀系数随夹杂物长径比、体分比、界面参数和固化热残余应力的变化特征曲线，数值结果表明：界面和固化热残余应力对于超磁致复合材料有效性能的影响是显著的。     

Static elastic and thermoelastic field fluctuations in multiphase composites

The spatially fluctuating strain and stress fields in a random heterogeneous thermoelastic medium are characterized by their mean values and square means in each phase. In the present paper the calculation of these quantities, which has been presented in a previous work for the case of a mechanical load only. is extended to include thermal expansion. Besides the derivation of some exact relations between the square means and the analytical properties of the effective thermal expansion coefficient the field fluctuations are calculated within an effective-medium procedure supposing an aggregate topology of the composite. Explicit results obtained for isotropic phases and spherical grain shapes are given in a more convenient representation than in our former work.     

基于细观力学方法的混凝土热膨胀系数预测

建立混凝土材料的有效性质与微结构参数之间的关系,是混凝土材料优化设计的基础。本文用细观力学方法对复合材料宏观有效热膨胀系数进行研究,得到了含有一球形夹杂物的无限大介质在均匀变温作用下的应力场。假定混凝土为由骨料和砂浆基质组成的二相复合材料,根据混凝土宏观体积热膨胀量与组成混凝土的各相介质细观体积热膨胀量相等的原则,采用基于Mori-Tanaka方法的混凝土宏观有效剪切模量,推导出混凝土有效热膨胀系数的解答。对稀疏解法、自洽方法和有限单元数值试验结果的比较说明,本文提出的基于自洽方法的混凝土宏观有效热膨胀系数的理论公式能够较好的描述混凝土的热学特性,该方法可以推广到多相复合材料宏观有效热膨胀系数的预测中。     

Local effective thermoelastic properties of graded random structure matrix composites

Summary  We consider a linearly thermoelastic composite medium, which consists of a homogeneous matrix containing a statistically inhomogeneous random set of ellipsoidal uncoated or coated inclusions, where the concentration of the inclusions is a function of the coordinates (functionally graded material). Effective properties, such as compliance and thermal expansion coefficient, as well as first statistical moments of stresses in the components are estimated for the general case of inhomogeneity of the thermoelastic inclusion properties. The micromechanical approach is based on the Green function technique as well as on the generalization of the multiparticle effective field method (MEFM), previously proposed for the research of statistically homogeneous random structure composites. The hypothesis of effective field homogeneity near the inclusions is used; nonlocal effects of overall constitutive relations are not considered. Nonlocal dependences of local effective thermoelastic properties as well as those of conditional averages of the stresses in the components on the concentration of the inclusions are demonstrated. Received 11 November 1999; accepted for publication 4 May 2000     

正交各向异性材料热弹性问题的三维无网格法计算模型及应用

建立了正交各向异性材料热弹性问题的三维无网格伽辽金(Element Free Galerkin, EFG)法计算模型。利用该计算模型对三维复合材料汽轮机叶轮和轴承座进行了热弹性分析,对比了材料方向角及热导率因子、热膨胀系数因子和拉压弹性模量因子不同组合情况下轴承座的最大热变形总位移和当量应力值,讨论了材料方向角及上述正交各向异性因子对热变形和当量应力的影响规律,并与各向同性材料进行了对比。结果表明:三维EFG模型的热变形总位移和当量应力相对误差范数分别比有限元法小0.1215%和0.1359%;材料方向角同时影响热变形的大小和方向,但对当量应力方向影响不大;正交各向异性材料因子主要影响热变形和当量应力的大小。在考虑热-机械载荷作用下的三维复合材料零件结构设计中,当以刚度或强度为主要需求时,材料方向角、热导率因子、热膨胀系数因子、拉压弹性模量因子分别在(45°~60°,8:1:4~10:1:5,(1/6):(1/5):1~(1/5):(1/4):1,(7/5):1:(9/5)~(3/2):1:2)或(0°~10°,(1/10):1:(1/5)~(1/8):1:(1/4),(1/5):1:(1/6)~(1/4):1:(1/5),1:(1/5):(1/10)~1:(1/4):(1/8))范围内取值能有效降低轴承座等结构的热变形和当量应力。     

Thermo-elastic properties of heterogeneous materials with imperfect interfaces: Generalized Levin's formula and Hill's connections

We study the thermo-elastic properties of heterogeneous materials containing spherical particles or cylindrical fibres. The interface between the matrix and second-phase inhomogeneity is imperfect with either the displacement or the stress experiencing a jump across it. We relate the effective coefficient of thermal expansion (CTE) to the effective elastic moduli and thereby generalize Levin's formula, and reveal two connections among the effective elastic moduli, thereby generalizing Hill's connections. In contrast to the classical results, the effective CTE in the presence of an imperfect interface is strongly dependent on the size of the inhomogeneity, besides the interface elastic and thermo-elastic properties. This size dependence has been accurately captured by simple scaling laws.     

Size-dependent effective thermoelastic properties of nanocomposites with spherically anisotropic phases

Composites made of semi-crystalline polymers and nanoparticles have a spherulitic microstructure which can be reasonably represented by a spherically anisotropic volume element. Due to the high surface-to-volume ratio of a nanoparticle, the particle-matrix interface stress, usually neglected in determining the effective elastic moduli of particle-reinforced composites, may have a non-negligible effect. To account for the latter in estimating the effective thermoelastic properties of a composite consisting of nanoparticles embedded in a semi-crystalline polymeric matrix, this work adopts a coherent interface model for the nanoparticle-matrix interface and proposes an extended version of the classical generalized-self consistent method. In particular, Eshelby's formulae widely used to calculate the elastic energy change of a homogeneous medium due to the introduction of an inhomogeneity are extended to the thermoelastic case. The nanoparticle size effect on the effective thermoelastic moduli of the composite are theoretically shown and numerically illustrated.     

Estimates of thermoelastic characteristics of composites reinforced by short anisotropic fibers

We construct a mathematical model describing thermomechanical interaction between composite structure elements (isotropic particles of the matrix and anisotropic short fibers) and the macroscopically isotropic elastic medium with desired thermoelastic characteristics. At the first stage of this model, the self-consistency method is used to obtain relations determining the elasticity moduli of the composite, and at the second stage, the model permits determining its linear thermal expansion coefficient. The dual variational statement of the linear thermoelasticity problem in an inhomogeneous solid permits obtaining two-sided estimates for the bulk elasticity modulus, shear modulus, and linear thermal expansion coefficient of the composite under study. The calculated dependencies presented in the paper permit predicting the thermoelastic characteristics of a composite reinforced by anisotropic short fibers (including those in the form of nanostructure elements).     

Thermal effects on interfacial stress transfer characteristics of carbon nanotubes/polymer composites

The paper presents an analytical method to investigate thermal effects on interfacial stress transfer characteristics of single/multi-walled carbon nanotubes/polymer composites system under thermal loading by means of thermoelastic theory and conventional fiber pullout models. In example calculations, the mechanical properties and the thermal expansion coefficients of carbon nanotubes and polymer matrix are, respectively, treated as the functions of temperature change. Numerical examples show that the interfacial shear stress transfer behavior can be described and affected by several parameters such as the temperature field, volume fraction of CNT, and numbers of wall layer and the outermost radius of carbon nanotubes. From the results carried out it is found that mismatch of thermal expansion coefficients between the carbon nanotubes and polymer matrix may be more important in governing interfacial stress transfer characteristics of carbon nanotubes/polymer composite system.     

SMA短纤维复合材料的热胀系数和相变应变系数

基于Eshelby的等效夹杂模型、Mori和Tanaka的场平均法,考虑到形状记忆合金（SMA）的强物理非线性,发展了增量型的等效夹杂模型（Incremental Equivalent Inclusion Model)。讨论了SMA短纤维增强的铝基复合材料的热胀系数和相变应变系数。特别研究了SMA短纤维复合材料纤维几何尺寸和体积分数等参数对SMA复合材料的热胀系数和相变应变系数的影响。这些工作对于指导材料设计和了解SMA复合材料热机械特性是非常有意义的。     

金属基复合材料中的热残余应变场及其对材料细观行为的影响

基于SiC／Al基复合材料中的SiC颗粒周期性排布的假设,采用轴对称体胞方法研究了金属基复合材料中的热残余应变场与粒子形状、体积分数等参数间的内在联系;在此基础上,探讨了热残余应变对夹杂内部和基体—夹杂界面的应力集中因子的影响．所得结果对于理解热残余应变对空洞形核的影响有参考价值。     

热对流条件下考虑球形夹杂分布的材料热弹接触摩擦热影响分析

机械传动关键活动零部件接触副往往受到力载荷和摩擦热载荷的耦合作用,使得接触界面间的接触力学行为的分析变得极其复杂. 利用基于等效夹杂方法建立的考虑热对流非均质材料热弹接触力学分析模型研究不同摩擦系数、夹杂位置和材料属性等参数对材料表面及内部温升及热应力分布影响规律. 此外,进一步分析了接触副材料中含分布球形夹杂时摩擦热造成的影响. 结果表明:接触副表面温升梯度受热对流系数的影响较大;下表面温升和热应力随摩擦系数增大而增大;分布夹杂则将接触副材料下表面温升及热应力分布变得更为复杂.      

弹塑性复合材料力学性能的细观研究

应用细观力学的Eshelby等效夹杂理论研究了复合材料的弹塑性问题。以铝基复合材料为例,建立了多轴载荷下复合材料弹塑性应力-应变关系,并且理论预报与实验结果符合较好,分析了夹杂形状、体积分数及加载路径对材料宏观性能的影响。同时,还研究了热塑性复合材料热膨胀系数与工艺温度之间的变化规律,分析了热残余应变对材料设计的影响。     

Interface effect on the effective bulk modulus of a particle-reinforced composite

Classical micromechanical methods for calculating the effective moduli of a heterogeneous material are generalized to include the interface (surface) effect. By using Hashin‘s Composite Sphere Assemblage (CSA) model, a new expression of the bulk modulus for a particle-reinforced composite is derived. It is emphasized that the present study is within the finite-deformation framework such that the effective properties are not influenced by the interface stress itself solely, but influenced by the change of the interface stress due to changes of the shape and size of the interface, itence some inadequacies in previous papers are pointed out.     

Inhomogeneity of the first and second statistical moments of stresses inside the heterogeneities of random structure matrix composites

In this paper linearly thermoelastic composite media are treated, which consist of a homogeneous matrix containing a statistically homogeneous random set of heterogeneities. Effective properties (such as compliance, thermal expansion, stored energy) as well as the first statistical moments of stresses in the phases are estimated for the general case of nonhomogeneity of the thermoelastic inclusion properties. The micromechanical approach is based on the generalization of the “multiparticle effective field” method (MEFM, see for references Buryachenko, Appl. Mech. Rev. (2001), 54, 1–47), previously proposed for the estimation of stress field averages in the phases. The method exploits as a background the new general integral equation proposed by the author before and makes it possible to abandon the use of the central concept of classical micromechanics such as effective field hypothesis as well as their satellite hypothesis of “ellipsoidal symmetry”. The implicit recursion representations of the effective thermoelastic properties and stress concentration factor are expressed through some building blocks described by numerical solutions for both the one and two inclusions inside the infinite medium subjected to the inhomogeneous effective fields evaluated from subsequent self-consistent estimations. One also estimates the inhomogeneous statistical moments of local stress fields which are extremely useful for understanding the evolution of nonlinear phenomena such as plasticity, creep, and damage. Just at some additional assumptions (such as an effective field hypothesis) the involved tensors can be expressed through the Green function, Eshelby tensor and external Eshelby tensor. These estimated inhomogeneities of effective fields lead to the detection of fundamentally new effects for the local stresses inside the heterogeneities.     

物性与温度相关材料广义热弹性模型及渐近分析

计及材料物性与温度的相关性,基于Clausius不等式和L-S广义热弹性理论,通过对自由能公式的高阶展开,构建了具有变物性特征的广义耦合热弹性动力学模型。推导了各向同性材料表面受热冲击问题的线性化控制方程组,利用热冲击的瞬时特征,借助于Laplace正、逆变换技术及其极限性质,给出了变物性条件下一维热冲击问题的温度场、位移场和应力场的渐近表达式。通过算例,得到了热冲击作用下各物理场的分布规律以及材料物性与温度相关性对于热弹性响应的影响规律。结果表明：材料物性与温度相关性对于各物理场的阶跃位置、阶跃间隔以及阶跃峰值均产生影响,但值得注意的是,相比于位移场和应力场的显著影响,其对温度场的影响效果并不明显。     

Thermal stress intensity factor for functionally gradient half space with an edge crack under thermal load

Summary The aim of this work is to investigate the thermal stress intensity factor of a functionally gradient half space with an edge crack under a steady heat flux. All material properties of the functionally gradient half space, except for the coefficient of linear thermal expansion, are exponentially dependent on the distance from the boundary of the plate. The coefficient of linear thermal expansion is assumed to be two-dimensionally dependent. The problem is reduced to a singular integral equation by using the Fourier transform. The thermal stress intensity factor versus the nonhomogeneous material parameters is calculated and represented in figures. The numerical results show that thermal stress intensity factor is dramatically decreased when the material nonhomogeneous parameters are appropriately selected.     

Two-dimensional thermoelastic contact problem of functionally graded materials involving frictional heating

The two-dimensional thermoelastic sliding frictional contact of functionally graded material (FGM) coated half-plane under the plane strain deformation is investigated in this paper. A rigid punch is sliding over the surface of the FGM coating with a constant velocity. Frictional heating, with its value proportional to contact pressure, friction coefficient and sliding velocity, is generated at the interface between the punch and the FGM coating. The material properties of the coating vary exponentially along the thickness direction. In order to solve the heat conduction equation analytically, the homogeneous multi-layered model is adopted for treating the graded thermal diffusivity coefficient with other thermomechanical properties being kept as the given exponential forms. The transfer matrix method and Fourier integral transform technique are employed to convert the problem into a Cauchy singular integral equation which is then solved numerically to obtain the unknown contact pressure and the in-plane component of the surface stresses. The effects of the gradient index, Peclet number and friction coefficient on the thermoelastic contact characteristics are discussed in detail. Numerical results show that the distribution of the contact stress can be altered and therefore the thermoelastic contact damage can be modified by adjusting the gradient index, Peclet number and friction coefficient.     

功能梯度材料结构热力耦合概率分析方法

基于自洽平均微观力学W-T(Wakashima-Tsukamoto)模型和拉丁超立方抽样,建立一种功能梯度平板热力耦合概率分析方法.以材料物理属性和空间分布的不确定性随机参数作为概率分析的输入,以热应力作为输出,基于本征正交分解POD(Proper Orthogonal Decomposition)对热应力的随机时间历...     

Micromechanics-based thermoelastic model for functionally graded particulate materials with particle interactions

Thermoelastic behavior of functionally graded particulate materials is investigated with a micromechanical approach. Based on a special representative volume element constructed to represent the graded microstructure of a macroscopic material point, the relation between the averaged strains of the particle and matrix phases is derived with pair-wise particle interactions, and a set of governing equations for the thermoelastic behavior of functionally graded materials is presented. The effective coefficient of thermal expansion at a material point is solved through the overall averaged strain of two phases induced by temperature change under the stress-free condition, and is shown to exhibit a weak anisotropy due to the particle interactions within the graded microstructure. When the material gradient is eliminated, the proposed model predicts the effective coefficient of thermal expansion for uniform composites as expected. If the particle interactions are disregarded, the proposed model recovers the Kerner model. The proposed semi-analytical scheme is consistent and general, and can handle any thermal loading variation. As examples, the thermal stress distributions of graded thermal barrier coatings are solved for two types of thermal loading: uniform temperature change and steady-state heat conduction in the gradation direction.