A SEMI-ANALYTICAL METHOD FOR THE VIBRATION OF AND SOUND RADIATION FROM A TWO-DIMENTIONAL BEAM-STIFFENED PLATE

A semi-analytical method based on space harmonics to investigate the vibration of and sound radiation from an infinite,fluid-loaded plate is presented.The plate is reinforced with two sets of orthogonally and equally spaced beam stiffeners,which are assumed to be line forces.The response of the stiffened plate to a convected harmonic pressure in the wave-number space is obtained by adopting the Green’s function and Fourier transform methods.Using the boundary conditions and space harmonic method,we establish the relationship between the stiffener forces and the vibration displacement of the plate.In this paper,the stiffener forces are expressed in terms of harmonic amplitudes of the plate displacement,which are calculated by using a numerical reduction technique.Finally,the Fourier inverse transform is employed to find expressions of the vibration and sound radiation in physical space.Agreements with existing results prove the validity of this approach and more numerical results are presented to show that this method converges rapidly.     

Acoustic radiation induced by bubble motion in compressible fluid

Based on the theory of compressible fluid, a three-dimension boundary element method is utilized to research the motion of bubble. The far-field noise radiation during the growth and contraction is calculated by the Kirchhoff formula and the Ffowcs Williams-Hawkings （FW-H） formula with a fixed radiation surface being arranged at the near-field of bubble as a new acoustic source. The results show that the amplitude of the sound pressure induced by non-spherical bubble is lower than that of spherical bubble in the contraction phase. The retardance effect is more obvious when the observer is farther away from the bubble. In the anaphase of contraction, the observer with the maximum amplitude of sound pressure moves up with the obvious jet. Larger buoyance parameters will generate lower sound pressure amplitudes in the anaphase, while larger intensive parameters will cause higher sound pressure amplitudes in the whole procedure of bubble motion.     

Large-eddy simulation of circular cylinder flow at subcritical Reynolds number: Turbulent wake and sound radiation

The flows past a circular cylinder at Reynolds number 3900 are simulated using large-eddy simulation(LES) and the far-field sound is calculated from the LES results. A low dissipation energy-conserving finite volume scheme is used to discretize the incompressible Navier–Stokes equations. The dynamic global coefficient version of the Vreman's subgrid scale(SGS) model is used to compute the sub-grid stresses. Curle's integral of Lighthill's acoustic analogy is used to extract the sound radiated from the cylinder. The profiles of mean velocity and turbulent fluctuations obtained are consistent with the previous experimental and computational results. The sound radiation at far field exhibits the characteristic of a dipole and directivity. The sound spectra display the-5/3 power law. It is shown that Vreman's SGS model in company with dynamic procedure is suitable for LES of turbulence generated noise.     

Reflection and radiation of a wave system at the open end of a submerged elastic pipe

The reflection and radiation of a wave system at the open end of a submerged semi-infinite elastic pipe are studied. This wave system consists of a flexural wave in the pipe, an acoustic surface wave in the fluid exterior to the pipe and an acoustic wave in the pipe’s interior. Fourier transform techniques are used to formulate this semi-infinite geometry problem rigorously as a Wiener-Hopf type equation. An approximate solution is obtained by using a perturbation method in which the ratio of the massdensities of the fluid and the pipe material is regarded as a small parameter. The calculation of the reflection coefficient is emphasized, and the polar plots of the radiation coefficient are also presented.     

On aerodynamic noises radiated by the pantograph system of high-speed trains

Pantograph system of high-speed trains become significant source of aerodynamic noise when travelling speed exceeds 300 km/h. In this paper, a hybrid method of non-linear acoustic solver （NLAS） and Ffowcs Williams-Hawkings （FW-H） acoustic analogy is used to predict the aerodynamic noise of pantograph system in this speed range. When the simulation method is validated by a benchmark problem of flows around a cylinder of finite span, we calculate the near flow field and far acoustic field surrounding the pantograph system. And then, the frequency spectra and acoustic attenuation with distance are analyzed, showing that the pantograph system noise is a typical broadband one with most acoustic power restricted in the medium-high frequency range from 200 Hz to 5 kHz. The aerodynamic noise of pantograph systems radiates outwards in the form of spherical waves in the far field. Analysis of the overall sound pressure level （OASPL） at different speeds exhibits that the acoustic power grows approximately as the 4th power of train speed. The comparison of noise reduction effects for four types of pantograph covers demonstrates that only case 1 can lessen the total noise by about 3 dB as baffles on both sides can shield sound wave in the spanwise direction. The covers produce additional aerodynamic noise themselves in the other three cases and lead to the rise of OASPLs.     

VIBRATION AND ACOUSTIC RADIATION FROM SUBMERGED STIFFENED SPHERICAL SHELL WITH DECK-TYPE INTERNAL PLATE

Based on the motion differential equations of vibration and acoustic coupling system for thin elastic spherical shell with an elastic plate attached to its internal surface, in which Dirac-δ functions are employed to introduce the moments and forces applied by the attachment on the surface of shell, by means of expanding field quantities as Legendre series, a semi-analytic solution is derived for the vibration and acoustic radiation from a submerged stiffened spherical shell with a deck-type internal plate, which has a satisfactory computational effectiveness and precision for an arbitrary frequency range. It is easy to analyze the effect of the internal plate on the acoustic radiation field by using the formulas obtained by the method proposed. It is concluded that the internal plate can significantly change the mechanical and acoustic characteristics of shell, and give the coupling system a very rich resonance frequency spectrum. Moreover, the method can be used to study the acoustic radiation mechanism in similar structures as the one studied here.     

3D numerical simulation on fluid-structure interaction of structure subjected to underwater explosion with cavitation

In the underwater-shock environment,cavitation occurs near the structural surface.The dynamic response of fluid-structure interactions is influenced seriously by the cavitation effects.It is also the difficulty in the field of underwater explosion.With the traditional boundary element method and the finite element method(FEM),it is difficult to solve the nonlinear problem with cavitation effects subjected to the underwater explosion.To solve this problem,under the consideration of the cavitation effects and fluid compressibility,with fluid viscidity being neglected,a 3D numerical model of transient nonlinear fluid-structure interaction subjected to the underwater explosion is built.The fluid spectral element method(SEM) and the FEM are adopted to solve this model.After comparison with the FEM,it is shown that the SEM is more precise than the FEM,and the SEM results are in good coincidence with benchmark results and experiment results.Based on this,combined with ABAQUS,the transient fluid-structure interaction mechanism of the 3D submerged spherical shell and ship stiffened plates subjected to the underwater explosion is discussed,and the cavitation region and its influence on the structural dynamic responses are presented.The paper aims at providing references for relevant research on transient fluid-structure interaction of ship structures subjected to the underwater explosion.     

Jet formation in shock-heavy gas bubble interaction

The influences of the acoustic impedance and shock strength on the jet formation in shock-heavy gas bubble interaction are numerically studied in this work. The process of a shock interacting with a krypton or a SF 6 bubble is studied by the numerical method VAS2D. As a validation, the experiments of a SF 6 bubble accelerated by a planar shock were performed. The results indicate that, due to the mismatch of acoustic impedance, the way of jet formation in heavy gas bubble with different species is diversified under the same initial condition. With respect to the same bubble, the manner of jet formation is also distinctly different under different shock strengths. The disparities of the acoustic impedance result in different effects of shock focusing in the bubble, and different behaviors of shock wave inside and outside the bubble. The analyses of the wave pattern and the pressure variation indicate that the jet formation is closely associated with the pressure perturbation. Moreover, the analysis of the vorticity deposition, and comparisons of circulation and baroclinic torque show that the baroclinic vorticity also contributes to the jet formation. It is concluded that the pressure perturbation and baroclinic vorticity deposition are the two dominant factors for the jet formation in shock-heavy gas bubble interaction.     

Flow of variable thermal conductivity fluid due to inclined stretching cylinder with viscous dissipation and thermal radiation

The aim of the present study is to investigate the flow of the Casson fluid by an inclined stretching cylinder. A heat transfer analysis is carried out in the presence of thermal radiation and viscous dissipation effects. The temperature dependent thermal conductivity of the Casson fluid is considered. The relevant equations are first simplified under usual boundary layer assumptions, and then transformed into ordinary differential equations by suitable transformations. The transformed ordinary differential equations are computed for the series solutions of velocity and temperature. A convergence analysis is shown explicitly. Velocity and temperature fields are discussed for different physical parameters by graphs and numerical values. It is found that the velocity decreases with the increase in the angle of inclination while increases with the increase in the mixed convection parameter. The enhancement in the thermal conductivity and radiation effects corresponds to a higher fluid temperature. It is also found that heat transfer is more pronounced in a cylinder when it is compared with a flat plate. The thermal boundary layer thickness increases with the increase in the Eckert number. The radiation and variable thermal conductivity decreases the heat transfer rate at the surface.     

A cellular scale numerical study of the effect of mechanical properties of erythrocytes on the near-wall motion of platelets

The effect of mechanical properties of erythrocytes on the near-wall motion of platelets was numerically studied with the immersed boundary method. Cells were modeled as viscous-fluid-filled capsules surrounded by hyper-elastic membranes with negligible thickness. The numerical results show that with the increase of hematocrit, the near-wall approaching of platelets is enhanced, with which platelets exhibit larger deformation and orientation angle of its near-wall tank-treading motion, and the lateral force pushing platelets to the wall is increased with larger fluctuation amplitude. Meanwhile the near-wall approaching is reduced by increasing the stiffness of erythrocytes.     

Interval finite difference method for steady-state temperature field prediction with interval parameters

A new numerical technique named interval finite difference method is proposed for the steady-state temperature field prediction with uncertainties in both physical parameters and boundary conditions. Interval variables are used to quantitatively describe the uncertain parameters with limited information. Based on different Taylor and Neumann series, two kinds of parameter perturbation methods are presented to approximately yield the ranges of the uncertain temperature field. By comparing the results with traditional Monte Carlo simulation, a numerical example is given to demonstrate the feasibility and effectiveness of the proposed method for solving steady-state heat conduction problem with uncertain-but-bounded parameters.     

Vibration analysis of axisymmetric functionally graded viscothermoelastic spheres简

The present study focuses on the analysis of free vibrations of axisymmetric functionally graded hollow spheres. The material is assumed to be graded in radial di- rection with a simple power law. Matrix Frrbenious method of extended power series is employed to derive the analytical solutions for displacement, temperature, and stresses. The dispersion relations for the existence of various types of pos- sible modes of vibrations in the considered hollow sphere are derived in a compact form. In order to explore the character- istics of vibrations, the secular equations are further solved by using fixed point iteration numerical technique with the help of MATLAB software. The numerical results have been presented graphically for polymethyl methecrylate materials in respect of natural frequencies, frequency shift, inverse quality factor, displacement, temperature change, and radial stress.     

Nanoscale mass sensing based on vibration of single-layered graphene sheet in thermal environments简

Based on vibration analysis, single-layered graphene sheet （SLGS） with multiple attached nanoparticles is developed as nanoscale mass sensor in thermal environments. Graphene sensors are assumed to be in simplysupported configuration. Based on the nonlocal plate the- ory which incorporates size effects into the classical theory, closed-form expressions lot the frequencies and relative fre- quency shills of SLGS-based mass sensor are derived using the Galerkin method. The suggested model is justified by a good agreement between the results given by the present model and available data in literature. The effects of tem- perature difference, nonlocal parameter, the location of the nanoparticle and the number of nanoparticles on the relative frequency shift of the mass sensor are also elucidated. The obtained results show that the sensitivity of the SLGS- based mass sensor increases with increasing temperature difference.     

Size effect of lattice material and minimum weight design

The size effects of microstructure of lattice materials on structural analysis and minimum weight design are studied with extented multiscale finite element method（EMsFEM） in the paper. With the same volume of base material and configuration, the structural displacement and maximum axial stress of micro-rod of lattice structures with different sizes of microstructure are analyzed and compared.It is pointed out that different from the traditional mathematical homogenization method, EMsFEM is suitable for analyzing the structures which is constituted with lattice materials and composed of quantities of finite-sized micro-rods.The minimum weight design of structures composed of lattice material is studied with downscaling calculation of EMsFEM under stress constraints of micro-rods. The optimal design results show that the weight of the structure increases with the decrease of the size of basic sub-unit cells. The paper presents a new approach for analysis and optimization of lattice materials in complex engineering constructions.     

Three dimensional simulations of penetrative convection in a porous medium with internal heat sources

The problem of penetrative convection in a fluid saturated porous medium heated internally is analysed. The linear instability theory and nonlinear energy theory are derived and then tested using three dimensions simulation.Critical Rayleigh numbers are obtained numerically for the case of a uniform heat source in a layer with two fixed surfaces. The validity of both the linear instability and global nonlinear energy stability thresholds are tested using a three dimensional simulation. Our results show that the linear threshold accurately predicts the onset of instability in the basic steady state. However, the required time to arrive at the basic steady state increases significantly as the Rayleigh number tends to the linear threshold.     

Coupled extension and thickness-twist vibrations of lateral field excited AT-cut quartz plates简

In this paper, the coupled extension and thickness- twist vibrations are studied for AT-cut quartz plates under Lateral Field Excitation （LFE） with variations along the x1- direction. Mindlin＇s two-dimensional equations are used for anisotropic crystal plates. Both free and electrically forced vibrations are considered. Important vibration characteristics are obtained, including dispersion relations, frequency spectra, and motional capacitances. It is shown that, to avoid the effects of the couplings between extension and thickness-twist vibrations, a series of discrete values of the length/thickness ratio of the crystal plate need to be excluded. The results are of fundamental significance for the design of LFE resonators and sensors.     

Exact mesh shape design of large cable-network antenna reflectors with flexible ring truss supports

An exact-designed mesh shape with favorable surface accuracy is of practical significance to the performance of large cable-network antenna reflectors. In this study, a novel design approach that could guide the generation of exact spatial parabolic mesh configurations of such reflector was proposed. By incorporating the traditional force density method with the standard finite element method, this proposed approach had taken the deformation effects of flexible ring truss supports into consideration, and searched for the desired mesh shapes that can satisfy the requirement that all the free nodes are exactly located on the objective paraboloid. Compared with the conventional design method,a remarkable improvement of surface accuracy in the obtained mesh shapes had been demonstrated by numerical examples. The present work would provide a helpful technical reference for the mesh shape design of such cable-network antenna reflector in engineering practice.     

Stability analysis of a thin-walled cylinder in turning operation using the semi-discretization method

In this work, the stability of a flexible thin cylindrical workpiece in turning is analyzed. A process model is derived based on a finite element representation of the workpiece flexibility and a nonlinear cutting force law. Repeated cutting of the same surface due to overlapping cuts is modeled with the help of a time delay. The stability of the so obtained system of periodic delay differential equations is then determined using an approximation as a time-discrete system and Floquet theory. The time-discrete system is obtained using the semi-discretization method. The method is implemented to analyze the stability of two different workpiece models of different thicknesses for different tool positions with respect to the jaw end. It is shown that the stability chart depends on the tool position as well as on the thickness.     

On the validity of the Boltzmann–BGK model through relaxation evaluation

The Boltzmann-Bhatnagar-Gross-Krook（BGK）model is investigated for its validity regarding the collision term approximation through relaxation evaluation. The evaluation is based on theoretical analysis and numerical comparison between the BGK and direct simulation Monte Carlo（DSMC） results for three specifically designed relaxation problems. In these problems, one or half component of the velocity distribution is characterized by another Maxwellian distribution with a different temperature. It is analyzed that the relaxation time in the BGK model is unequal to the molecular mean collision time. Relaxation of component distribution fails to involve enough contribution from other component distributions, which makes the BGK model unable to capture details of velocity distribution, especially when discontinuity exists in distribution. The BGK model,however, predicts satisfactory results including fluxes during relaxation when the temperature difference is small. Particularly, the model-induced error in the BGK model increases with the temperature difference, thus the model is more reliable for low-speed rarefied flows than for hypersonic flows.