Bi(NO3)3 · 5H2O mediated synthesis of 4,4′-diaminotriarylmethane leuco malachite compounds under solvent-free conditions

In this report, we described the synthesis and characterization of a variety of diaminotriarylmethane derivatives with dimethylamino functional groups. These compounds were synthesized by the tandem regio-selective electrophilic aromatic substitution reaction of N,N-dimethylaniline with aryl aldehydes to form the corresponding diaminotriarylmethane compounds. In our strategy, Bi(NO₃)₃ was used as a catalyst under solvent free conditions to afford the desired products in good to excellent yields.      

Efficient synthesis of diarylidene octahydroacridines by one-pot multi-component tandem reactions

A one-pot multi-component reaction is developed for the efficient synthesis of 4,5-dibenzylidene octahydroacridines in high yields. The reaction is performed by the tandem reaction of three molar equivalent aromatic aldehydes with two molar equivalent 4-alkylcyclohexanone in the system of NH₄OAc/HOAc under microwave irradiation.      

Ionic liquid promoted synthesis of bis(indolyl) methanes

1-benzyl-3-methyl imidazolium hydrogen sulphate [bnmim][HSO₄] was found to be an effective catalyst for the condensation reaction of indoles and derivatives with benzaldehydes in microwave irradiation with lower reaction time and higher yields to give bis(indolyl) methanes.      

The binary system PbO - BiVO4

Phase equilibria established in the PbO - BiVO₄ system over the whole component concentration range up to 1000°C have been investigated. A phase diagram has been constructed using DTA and XRD.      

Thermal synthesis and characterization of Al χ La1-χ P3O9

New binary lanthanum-aluminum triphosphates were synthesized by thermal-condensation method from H₃PO₄, La₂O₃ and Al(OH)₃. These pigments could be potentially used as special inorganic pigments; their corrosion-inhibition properties were widely studied. Synthesis conditions were determined on the basis of DTA and TG measurements. The products were also characterized by X-ray diffraction analysis. Physical properties — density by pycnometric method, particle size distribution, oil number and critical pigment volume concentration (CPVC), pH and specific conductivity of their aqueous extracts were also determined.      

Separation and determination of inorganic cations in beverages by capillary electrophoresis with indirect UV detection

A rapid, simple and reliable capillary electrophoresis method for the separation and quantitation of inorganic cations with indirect UV detection at 214 nm was developed. The electrolyte was: 12 mM imidazole as background absorbance provider; 5 mM malic acid and 1.0 mM 18-crown-6 ether as complexing agents; and 20% D₂O (v/v) to improve ion mobility. The pH was 4.25. The applied voltage was 22 kV at 22°C. Nine ions were completely separated and determined with correlation coefficients of 0.9979-0.9992. The relative standard deviations (RSD) were less than 0.5% for migration time and less than 5.2% for peak area (n=8). The detection limits (S/N=3) were from 0.08 mg L⁻¹ (for Na⁺) to 0.51 mg L⁻¹ (for Cu²⁺). To assess the reliability atomic absorption (AA) was also used to determine the same samples. Satisfactory results were obtained for real samples of jasmine tea drink and coconut milk.      

Methylcellulose/SiO<Subscript>2</Subscript> hybrids: sol-gel preparation and characterization by XRD,FTIR and AFM

Methylcellulose (MC) / SiO₂ organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO₂. AFM depicts surface roughness which depends on the silica precursor and MC content.      

Synthesis and structure of new 3,7,10-substituted-phenothiazine derivatives

The synthesis of new 3,7-dibromophenothiazine derivatives bearing bromoalkyl, mercaptoalkyl and alkylthioacetate groups on the N atom at position 10 is reported. The Suzuki coupling reaction of one of these derivatives via the bromine atoms at positions 3 and 7 with bromothiophene derivatives is also discussed.      

2-(benzimidazol-2-yl)-3-hydroxychromone derivatives: spectroscopic properties and a possibile alternative intramolecular proton phototransfer

Three 2-(benzimidazol-2-yl)-3-hydroxychromone derivatives were synthesized. Their spectroscopic and fluorescent properties, due to excited state intramolecular proton transfer (ESIPT) from OH to carbonyl, were studied. Theoretical possibility of an alternative intramolecular H-bonding and experimental evidence for such behavior are discussed.      

Synthesis by self-assembly and structural characterization of a new co-crystal system {[Cu(NO3)2(H2O)2]L1(NO3)2} (L1 = 1,1′-dibenzyl-3,3′-butyl-diimidazolium-2,2′-diylidene) from copper nitrate and a carbene precursor

Herein, the first example of a co-crystal system formed by an imidazolium nitrate, a carbene precursor, and copper (II) nitrate, {[Cu(NO₃)₂(H₂O)₂]L1(NO₃)₂} (1) (L1 = 1,1′-dibenzyl-3,3′-butyl-diimidazolium-2,2′-diylidene) is reported. These two building blocks are connected in the solid state through hydrogen bonds to generate a three-dimensional supramolecular network.      

Theoretical determination of the favorable mechanism of the reaction between AlX and HX (X = Br, Cl, and F)

The reaction mechanism between AlX and HX (X = Br, Cl, and F) have been characterized in detail using DFT as well as the ab initio method. The reaction yielding AlX₃ and molecular hydrogen was calculated to be highly exothermic. The present calculations also show that the possible routes to the trihalides species start more favorable with the primary insertion product AlX₂H than with the biadduct AlX(HX)₂ one.      

Ugi products containing boronate esters

The Ugi reaction with formylphenylboronic acid derivatives as the carbonyl component proceeds to give the corresponding boron-containing dipeptide derivatives (Ugi products) in good yields.      

2-pyrrolidone - capped Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals

Water-soluble Mn₃O₄ nanocrystals have been prepared through thermal decomposition in a high temperature boiling solvent, 2-pyrrolidone. The final product was characterized with XRD, SEM, TEM, FTIR and Zeta Potential measurements. Average crystallite size was calculated as ∼15 nm using XRD peak broadening. TEM analysis revealed spherical nanoparticles with an average diameter of 14±0.4 nm. FTIR analysis indicated that 2-pyrrolidone coordinates with the Mn₃O₄ nanocrystals only via O from the carbonyl group, thus confining their growth and protecting their surfaces from interaction with neighboring particles.      

Synthesis of Xenbucin using Suzuki reaction catalyzed by Pd/C in water

Xenbucin 1, an analgesic drug, was synthesized in 4 steps using two different routes. The biaryl fragment could successfully be produced via a Pd/C catalysed Suzuki coupling in water using sodium tetraphenylborate as a phenylation reagent. Overall yields of the routes were 36% and 59%, respectively.      

Synthesis,characterization and antifungal testing of 3,4-dihydropyrimidin-2(1H)-(thio)ones containing boronic acids and boronate esters

The addition of formylphenylboronic acid derivatives to thiourea and ethyl acetoacetate proceeds in the presence of an additional Lewis acid catalyst to give the corresponding 3,4-dihydropyrimidin-2(1H)-(thio)ones (Biginelli products) in moderate yield. Compounds were tested for antifungal activity against pure cultures of Aspergillus niger, Aspergillus flavus, Candida albicans and Saccharomyces cerevisiae but, unfortunately, none showed any appreciable activity.      

Synthesis and characterization of azanonaborane-containing purine derivatives for boron neutron capture therapy

Derivatives of purine, adenine, guanine, and 2,6-diaminopurine linked to the azanonaborane (B₈N cluster) have been prepared, for possible use as powerful agents for boron neutron capture therapy (BNCT). The synthesis was carried out via a ligand exchange reaction. The exo-NH₂R group of the azanonaborane of the type [(RH₂N)B₈H₁₁NHR] can be exchanged by one hetero-nitrogen atom of the pyrimidine ring, and except for guanine, also by an N atom of the imidazole ring. The identity of the products was confirmed by NMR, elemental analysis, IR, and mass spectrometry. No reaction was found to occur with caffeine and theophylline under the same reaction conditions.      

Calorimetric study of melts in the System KF - K<Subscript>2</Subscript>NbF<Subscript>7</Subscript>

The relative enthalpies of melts in the system KF - K₂NbF₇ were measured by drop-calorimetry at the temperatures 1058, 1140 and 1208 K as a function of composition. Heat capacities of melted mixtures and enthalpies of mixing were determined using the experimental data. The molar heat capacity of melts diverges slightly from additivity. The molar enthalpy of mixing of melts shows small negative deviation from ideality which decreases with decreasing temperature. The thermal effect at mixing was assigned predominantly to association reactions producing more complex fluoroniobate anions.      

Spectral study of coumarin-3-carboxylic acid interaction with human and bovine serum albumins

Fluorescence spectroscopy and circular dichroism (CD) spectroscopy were used to investigate the interaction of coumarin-3-carboxylic acid with human serum albumin (HSA) and bovine serum albumin (BSA) under physiological conditions in a buffer solution of pH 7.4.      

ZrOCl<Subscript>2</Subscript> · 8H<Subscript>2</Subscript>O: An efficient catalyst for rapid one-pot synthesis of 3-carboxycoumarins under ultrasound irradiation in water

In this report, a rapid, efficient and environmental friendly synthesis of 3-carboxycoumarins under ultrasound irradiation in water media is described. The Knoevenagel condensation of Meldrum’s acid with substituted benzaldehydes in the presence of zirconium oxide chloride (ZrOCl₂·8H₂O) and ultrasonic irradiation in water gave the corresponding 3-carboxycoumarins in good to excellent yields.      

Synthesis of dibromo ketones by the reaction of the environmentally benign H<Subscript>2</Subscript>O<Subscript>2</Subscript>-HBr system with oximes

It was found that oximes undergo deoximation in the presence of the H₂O_2aq-HBr_aq system to form ketones and bromo ketones. This reaction provided the basis for the synthesis of dibromo ketones in yields varying from 40% to 94%. This method is environmentally friendly, sustainable, and easy to perform. The results of this investigation extend the potential of the use of oximes for the protection of carbonyl group, thus offering the ability to perform not only conventional deoximation but also the subsequent bromination of ketones. The reaction is easily scaled up and dibromo ketones can be prepared in gram amounts.