Surface modification of permalloy (Ni<Subscript>80</Subscript>Fe<Subscript>20</Subscript>) nanoparticles for biomedical applications

We report a simple and novel method for surface biofunctionalization onto recently reported Ni₈₀Fe₂₀ permalloy nanoparticles (~71 nm) and the immobilization of a model protein, IgG from human serum. The strategy of protein immobilization involved attachment of histidine-tagged streptavidin to the Ni₈₀Fe₂₀ nanoparticles via a non-covalent ligand binding followed by biotinylated human IgG binding on the nanoparticle surface using the specific high affinity avidin–biotin interaction. The biofunctionalization of Ni₈₀Fe₂₀ permalloy nanoparticles was confirmed by Fourier Transform InfraRed (FTIR) spectroscopy and protein denaturing gel electrophoresis (lithium dodecyl sulfate-polyacrylamide gel electrophoresis, LDS-PAGE). This protocol for surface functionalization of the novel nanometer-sized Ni₈₀Fe₂₀ permalloy particles with biological molecules could open diverse applications in disease diagnostics and drug delivery.     

Modification of the “Transcritical” state in Ni<Subscript>75</Subscript>Fe<Subscript>16</Subscript>Cu<Subscript>5</Subscript>Mo<Subscript>4</Subscript> films produced by RF sputtering

The saturation magnetization, the perpendicular and rotational anisotropy constants, and the coercitivity of Ni₇₅Fe₁₆Cu₅Mo₄ thin magnetic films produced by rf sputtering are measured in the initial state and after annealing. A relation between the presence of perpendicular anisotropy and the “transcritical” state in the films is established. It is shown that, after additional thermal treatment, the magnetic softness of the films can be improved.     

Magnetic and dielectric properties of Mn<Subscript>0.2</Subscript>Ni<Subscript>0.8</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles synthesized by PEG-assisted hydrothermal method

We present a systematic investigation on the structural and magnetic properties of Mn_0.2Ni_0.8Fe₂O₄ nanoparticles synthesized by a polyethylene glycol (PEG)-assisted hydrothermal route. XRD, FT-IR, TEM and VSM were used for the structural, morphological, dielectric properties and magnetic investigation of the products, respectively. Average crystallite size of product was estimated using Line profile fitting as 6 ± 1 nm and particle size as 6.5 ± 1.0 nm from TEM micrographs. Magnetization measurements have shown that the particles have a blocking temperature of 134 K. Magnetization and the coercive field of the sample increase by decreasing the temperature. The conductivity measurements reveal the semiconducting behaviour for the sample. Temperature-dependent dielectric properties: dielectric permittivity (ε) and ac conductivity (σ_ac) for the sample were studied as a function of applied frequency in the range from 1 Hz to 3 MHz. These studies indicated that the dielectric dispersion curve for the sample showed usual dielectric dispersion which can be explained on the basis of Koop’s theory, which is based on the Maxwell–Wagner model for the interfacial polarization of homogeneous double structure.     

The evolution of electronic configuration and magnetic characterization of Fe<Subscript>9</Subscript>Ni<Subscript>1</Subscript>, Fe<Subscript>8</Subscript>Ni<Subscript>2</Subscript> alloy in theoretical calculation

To analyze the origin of the magnetic enhancement of Fe-Ni alloy, the electronicconfigurations and magnetic properties were investigated using density functional theorybased on the first-principle. The supercell (5 × 1 × 1) of Fe,Fe₉Ni₁ and Fe₈Ni₂ were constructed. Thedefect formation energy, band structure, density of states and electron density differencewere calculated. The results showed that Ni doping changed the electronic configuration ofFe atoms, resulting in the enhancement of spin polarization of Fe and the larger Bohrmagnetic moment in Fe-Ni alloys (Fe₉Ni₁). The results showed thatthe charge transfer and the atomic spacing between Fe atoms and the dopant Ni atoms playedan important role in determination of magnetic moment. The value of Fe supercell(5 × 1 × 1), Fe₉Ni₁ and Fe₈Ni₂ were 23.14,23.34 and 22.61μ _B, respectively.     

Structure and magnetoresistive properties of three-layer thin films of spin-valve type

Three-layer thin films of spin-valve type Co/Сu/Ni_xFe_100-x at x = 20–80 at.% were prepared by electron-beam sputter deposition. The investigated phase state and magnetoresistive properties were done for as-deposited and annealed to 400, 550, and 700 K films. The measurements of field dependences of magnetoresistance were held at different temperatures. It was demonstrated that phase state, crystal structure, and magnetoresistive properties of Co/Сu/Ni_xFe_100-x systems strongly dependent on both Ni_xFe_100-x composition Ni_xFe_100-x and heat treatment conditions.     

Mechanical alloying of Ni<Subscript>80</Subscript>Ta<Subscript>20</Subscript> and Ni<Subscript>80</Subscript>Nb<Subscript>20</Subscript>. Crystallization of the amorphous phase

The sequence and crystallization kinetics of the amorphous phase have been analyzed by differential scanning calorimetry and X-ray diffraction for mechanochemically activated Ni₈₀Ta₂₀ and Ni₈₀Nb₂₀ samples. The formation of equilibrium products from the amorphous phase occurs through the formation of metastable products of the A3 type. The kinetic parameters (activation energy and reaction order) and thermodynamic characteristics of this process are determined. Crystallization of the amorphous phase for the Ni₈₀Ta₂₀ and Ni₈₀Nb₂₀ systems occurs due to the growth of existing nuclei through the polymorphic and eutectic mechanisms, respectively. The thermal effects of the synthesis of equilibrium products from a mechanochemically activated mixture of components are identified.     

Physical properties,crystal and magnetic structure of layered Fe<Subscript>1.11</Subscript>Te<Subscript>1-</Subscript><Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> superconductors

The physical and structural properties of Fe_1.11Te and Fe_1.11Te_0.5Se_0.5 have been investigated by means of X-ray and neutron diffraction as well as physical property measurements. For the Fe_1.11Te compound, the structure distortion from a tetragonal to monoclinic phase takes place at 64 K accompanied with the onset of antiferromagnetic order upon cooling. The magnetic structure of the monoclinic phase was confirmed to be of antiferromagnetic configuration with a propagation vector k = (1/2, 0, 1/2) based on Rietveld refinement of neutron powder diffraction data. The structural/magnetic transitions are also clearly visible in magnetic, electronic and thermodynamic measurements. For superconducting Fe_1.11Te_0.5Se_0.5 compound, the superconducting transition with T _c = 13.4 K is observed in the resistivity and ac susceptibility measurements. The upper critical field H _c2 is obtained by measuring the resistivity under different magnetic fields. The Kim’s critical state model is adopted to analyze the temperature dependence of the ac susceptibility and the intergranular critical current density is calculated as a function of both field amplitude and temperature. Neutron diffraction results show that Fe_1.11Te_0.5Se_0.5 crystalizes in tetragonal structure at 300 K as in the parent compound Fe_1.11Te and no structural distortion is detected upon cooling to 2 K. However an anisotropic thermal expansion anomaly is observed around 100 K.     

Structure,charge ordering and physical properties of Yb<Subscript>2</Subscript>Fe<Subscript>3</Subscript>O<Subscript>7</Subscript>

The structural and physical properties of the layered Yb₂Fe₃O₇ have been extensively investigated. Transmission electron microscopy (TEM) observations at room temperature reveal the presence of diffuse zigzag-type streaks at 1/3(h h l) running along the c* axis direction, suggesting the presence of a charge ordered state with a shorter coherence length in comparison with that in Lu₂Fe₃O₇. The measurements of magnetization demonstrate that the replacement of Lu³⁺ by the magnetic Yb³⁺ ion in this layered system could result in visible effects on the low-temperature magnetic properties: the ferrimagnetic phase transition temperature decreases and an additional magnetic anomaly possibly attributed to antiferromagnetic coupling between Yb and Fe layers appears at around 50 K. Analysis of the dielectric properties shows that the Yb₂Fe₃O₇ material in general has a large dielectric constant of about 5000 at room temperature, and a broader relaxation time distribution in comparison with ErFe₂O₄.     

Electro-optic properties of epitaxial Sr<Subscript>0.6</Subscript>Ba<Subscript>0.4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>6</Subscript> films grown on MgO substrates using Li<Subscript>x</Subscript>Ni<Subscript>2-x</Subscript>O buffer layer

Textured Li_xNi_2-xO (LNO) thin films have been fabricated on (001)MgO substrates by pulsed laser deposition technique. The as-deposited LNO films shows a conductivity of 2.5×10^-3 Ω m and possess a transmittance of about 35% in the visible region. Subsequent deposition of Sr_0.6Ba_0.4Nb₂O₆ (SBN60) thin film on these LNO-coated MgO substrates resulted in a textured SBN layer with a 〈001〉 orientation perpendicular to the substrate plane. Phi scans on the (221) plane of the SBN layer indicated that the films have two in-plane orientations with respect to the substrate. The SBN unit cells were rotated in the plane of the film by ± 8.2° as well as ± 45° with respect to the LNO/MgO substrate. Besides the highly (00l)-orientation, the SBN films also exhibited a dense microstructure as shown by scanning electron microscopy. The electro-optic coefficient (r₃₃) of the SBN film was measured to be 186 pm/V. On the basis of our results, we have demonstrated that the LNO film can be used as a buffer layer as well as a transparent bottom electrode for waveguide applications. The SBN/LNO heterostructure is also a suitable candidate for integrated electro-optics devices. PACS  42.79.Gn; 42.82.Et; 78.20.Ci     

Structural evolutions of the mechanically alloyed Al<Subscript>70</Subscript>Cu<Subscript>20</Subscript>Fe<Subscript>10</Subscript> powders

Elemental mixtures of Al, Cu, Fe powders with the nominal composition of Al₇₀Cu₂₀Fe₁₀ were mechanically alloyed in a planetary ball mill for 80 h. Subsequent annealing of the as-milled powders were performed at 600–800°C temperature range for 4 h. Structural characteristics of the mechanically alloyed Al₇₀Cu₂₀Fe₁₀ powders with the milling time and the heat treatment were investigated by X-ray diffraction (XRD), differential scanning calorimeter (DSC) and differential thermal analysis (DTA). Mechanical alloying of the Al₇₀Cu₂₀Fe₁₀ did not result in the formation of icosahedral quasicrystalline phase (i-phase) and a long time milling resulted in the formation of β-Al(Cu,Fe) solid solution phase (β-phase). The i-phase was observed only for short-time milled powders after heat treatment above 600°C. The β-phase was one of the major phases in the Al₇₀Cu₂₀Fe₁₀ alloy. The w-Al₇Cu₂Fe₁ phase (w-phase) was obtained only after heat treatment of the short-time milled and unmilled samples. The present investigation indicated that a suitable technique to obtain a large amount of quasicrystalline powders is to use a combination of short-time milling and subsequent annealing.     

Microemulsion-mediated in-situ synthesis and magnetic characterization of polyaniline/Zn<Subscript>0.5</Subscript>Cu<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite

Polyaniline/Zn_0.5Cu_0.5Fe₂O₄ nanocomposite was synthesized by a simple, general and inexpensive in-situ polymerization method in w/o microemulsion. The effects of polyaniline coating on the magnetic properties of Zn_0.5Cu_0.5Fe₂O₄ nanoparticles were investigated. The structural, morphological and magnetic properties of as-prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, scanning electron microscopy (SEM) and magnetic measurements. The morphology analysis confirmed that polyaniline was deposited on the porous surface of magnetic Zn_0.5Cu_0.5Fe₂O₄. It was shown that the saturation magnetization and coercivity of Zn_0.5Cu_0.5Fe₂O₄ decreased after polyaniline coating, which can be interpreted by the interparticle dipole–dipole interactions that contributed to magnetic anisotropy and changed the magnetic properties of the nanoparticles. PACS  74.25.Ha; 81.05.-t; 81.05.Lg     

La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> thin films on SrTiO<Subscript>3</Subscript> and CaTiO<Subscript>3</Subscript> buffered Si substrates: structural,static, and dynamic magnetic properties

Nearly 50-nm thick La_0.7Sr_0.3MnO₃ (LSMO) films were grown on Si substrates using molecular beam epitaxy on (001) Si substrates over-layered by a 20 nm thick SrTiO₃ (STO) or by a 20 nm thick CaTiO₃ (CTO) film. In addition, a reference LSMO film was directly deposited on a (001) STO substrate by pulsed laser deposition. For all the samples, X-ray diffraction revealed an excellent epitaxy of the LSMO film and small mosaicity around (001), with in-plane [100] and [010] cubic axes. The LSMO/CTO films are in-plane compressed while the LSMO/STO ones are in-plane extended. The temperature dependence of their static magnetic properties was studied using a SQUID, showing a Curie temperature overpassing 315 K for all the samples. Hysteresis loops performed at room temperature (294 K) with the help of a vibrating sample magnetometer (VSM) are also discussed. At 294 K Micro-strip ferromagnetic resonance (MS-FMR) was used to investigate the dynamic magnetic properties. It allows concluding to a strong anisotropy perpendicular to the films and to a weak fourfold in-plane anisotropy with easy axes along the [110] and [1[`1]0 1\bar{1}0 ] directions. Their values strongly depend on the studied sample and are presumably related to the strains suffered by the films.     

Polarization modes in the Ba<Subscript>2</Subscript>Mg<Subscript>2</Subscript>Fe1<Subscript>2</Subscript>O<Subscript>22</Subscript> multiferroic

The spectra of complex permittivity of a Ba₂Mg₂Fe₁₂O₂₂ single crystal belonging to the family of Y-type hexaferrites have been measured over a wide temperature range (10–300 K) with the aim of determining the dynamic parameters of the phonon and magnetic subsystems in the terahertz and infrared frequency ranges (3–4500 cm⁻¹). A factor-group analysis of the vibrational modes has been performed, and the results obtained have been compared with the experimentally observed resonances. The oscillator parameters of all nineteen phonon modes of E _u symmetry, which are allowed by the symmetry of the Ba₂Mg₂Fe₁₂O₂₂ crystal lattice, have been calculated. It has been found that, at temperatures below 195 and 50 K, the spectral response exhibits new absorption lines due to magnetic excitations.     

Magnetic properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.47</Subscript>Al<Subscript>0.03</Subscript>O<Subscript>2</Subscript> as positive electrode for Li-ion batteries

The layered LiNi_0.5Mn_0.47Al_0.03O₂ was synthesized by wet chemical method and characterized by X-ray diffraction and analysis of magnetic measurements. The powders adopted the α-NaFeO₂ structure. This substitution of Al for Mn promotes the formation of Li(Ni_0.47²⁺Ni_0.03³⁺Mn_0.47⁴⁺Al_0.03³⁺)O₂ structures and induces an increase in the average oxidation state of Ni, thereby leading to the shrinkage of the lattice unit cell. The concentration of antisite defects in which Ni²⁺ occupies the (3a) Li lattice sites in the Wyckoff notation has been estimated from the ferromagnetic Ni²⁺(3a)–Mn⁴⁺(3b) pairing observed below 140 K. The substitution of 3% Al for Mn reduces the amount of antisite defects from 7% to 6.4–6.5%. The analysis of the magnetic properties in the paramagnetic phase in the framework of the Curie–Weiss law agrees well with the combination of Ni²⁺ (S = 1), Ni³⁺ (S = 1/2) and Mn⁴⁺ (S = 3/2) spin-only values. Delithiation has been made by the use of K₂S₂O₈. According to this process, known to be softer than the electrochemical one, the nickel ions in the (3b) sites are converted into Ni⁴⁺ in the high spin configuration, while Ni²⁺(3a)–Mn⁴⁺(3b) ferromagnetic pairs remain, as the Li⁺(3b) ions linked to the Ni²⁺(3a) ions in the antisite defects are not removed. The results show that the antisite defect is surrounded by Mn⁴⁺ ions, implying the nonuniform distribution of the cations in agreement with previous NMR and neutron experiments.     

Magnetic properties of the Nd<Subscript>0.5</Subscript>Gd<Subscript>0.5</Subscript>Fe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> single crystal

The magnetic properties of the Nd_0.5Gd_0.5Fe₃(BO₃)₄ single crystal have been studied in principal crystallographic directions in magnetic fields to 90 kG in the temperature range 2–300 K; in addition, the heat capacity has been measured in the range 2–300 K. It has been found that, below the Néel temperature T _N = 32 K down to 2 K, the single crystal exhibits an easy-plane antiferromagnetic structure. A hysteresis has been detected during magnetization of the crystal in the easy plane in fields of 1.0–3.5 kG, and a singularity has been found in the temperature dependence of the magnetic susceptibility in the easy plane at a temperature of 11 K in fields B < 1 kG. It has been shown that the singularity is due to appearance of the hysteresis. The origin of the magnetic properties of the crystal near the hysteresis has been discussed.     

FMR and TEM Studies of Co and Ni Nanoparticles Implanted in the SiO<Subscript>2</Subscript> Matrix

Fused silica plates have been implanted with 40 keV Co⁺ or Ni⁺ ions to high doses in the range of (0.25–1.0) × 10¹⁷ ions/cm², and magnetic properties of the implanted samples have been studied with ferromagnetic resonance (FMR) technique supplemented by transmission electron microscopy, electron diffraction and energy dispersive X-ray spectroscopy. The high-dose implantation with 3d-ions results in the formation of cobalt and nickel metal nanoparticles in the irradiated subsurface layer of the SiO₂ matrix. Co and Ni nanocrystals with hexagonal close packing and face-centered cubic structures have a spherical shape and the sizes of 4–5 nm (for cobalt) and 6–14 nm (for nickel) in diameter. Room-temperature FMR signals from ensembles of Co and Ni nanoparticles implanted in the SiO₂ matrix exhibit an out-of-plane uniaxial magnetic anisotropy that is typical for thin magnetic films. The dose and temperature dependences of FMR spectra have been analyzed using the Kittel formalism, and the effective magnetization and g-factor values have been obtained for Co- and Ni-implanted samples. Nonsymmetric FMR line shapes have been fitted by a sum of two symmetrical curves. The dependences of the magnetic parameters of each curve on the implantation dose and temperature are presented.     

Structural and magnetic properties of layered Ca<Subscript>3</Subscript>Co<Subscript>4</Subscript>O<Subscript>9</Subscript> thin films

Layered cobalt oxides Ca₃Co₄O₉ thin films have been grown directly on c-cut sapphire substrates using pulsed laser deposition. X-ray diffraction and transmission electron microscopy characterizations show that the deposited films present the expected monoclinic structure and a texture along the direction perpendicular to the Al₂O₃(001) plane. The Ca₃Co₄O₉ structure presents six variants in the film plane. Rutherford backscattering spectroscopy shows that the films are stoichiometric and that the film thickness agrees with the nominal value. The susceptibility χ of the films, recorded along the c-axis of the substrate, after field cooling and zero field cooling in an applied field of 1 kOe shows two magnetic transitions at 19 and 370 K which agree well with previous findings on single crystal samples. In turn, at low temperature (5 K), the magnetization curve along the c-axis exhibits coercive field and remanent magnetization much smaller than those reported for bulk samples, which can be related to the influence of structural variants and structural defects.     

Magnetic properties of Pb<Subscript>2</Subscript>Fe<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>9</Subscript> single crystals

Single crystals of Pb₂Fe₂Ge₂O₉ have been grown. They were subjected to X-ray diffraction, magnetic, neutron diffraction, Mössbauer and spin resonance studies. It has been established that Pb₂Fe₂Ge₂O₉ is a weak ferromagnet with a Néel temperature T _N = 46 K, and the exchange and spin-flop transition fields have been estimated. It has been demonstrated that the weak ferromagnetic moment is actually the result of the single-ion anisotropy axes for the magnetic moments of different magnetic sublattices being not collinear.     

Magnetic and Magnetodielectric Properties of Ho<Subscript>0.5</Subscript>Nd<Subscript>0.5</Subscript>Fe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>

The magnetic and magnetodielectric properties of Ho_0.5Nd_0.5Fe₃(BO₃)₄ ferroborate with the competing Ho–Fe and Nd–Fe exchange couplings have been experimentally and theoretically investigated. Step anomalies in the magnetization curves at the spin-reorientation transition induced by the magnetic field B ║ c have been found. The spontaneous spin-reorientation transition temperature T_SR ≈ 8 K has been refined. The measured magnetic properties and observed features are interpreted using a single theoretical approach based on the molecular field approximation and calculations within the crystal field model of the rare-earth ion. Interpretation of the experimental data includes determination of the crystal field parameters for Ho³⁺ and Nd³⁺ ions in Ho_0.5Nd_0.5Fe₃(BO₃)₄ and parameters of the Ho–Fe and Nd–Fe exchange couplings.     

Anomalous magnetic relaxation in thin Pd<Subscript>0.99</Subscript>Fe<Subscript>0.01</Subscript> films

The magnetic relaxation in Pd_0.99Fe_0.01 films, which have the thicknesses that are practically important for cryoelectronics (25 and 40 nm), is detected and experimentally studied. The relaxation is shown to be substantial only in thin films. The magnetization relaxation is found to be well described by the sum of two exponential functions with characteristic times that differ by an order of magnitude from each other. The characteristic relaxation time and the ratio of the contributions of two relaxations depend on temperature. The activation energies of the relaxation processes are determined. The activation volume is shown to correspond to a 20-nm ferromagnetic cluster. The results obtained agree with the model of two-component magnetization in thin PdFe films [6].