Structural and dynamical properties of Ru(0 0 0 1) surface

I performed density functional theory (DFT) calculations combined with MD simulations to study the structural relaxation of Ru(0001) surface. The surface relaxation of the topmost layer is found to be about ?4% at absolute zero temperature. Using MD simulations in the temperatures range of 50 K and 900 K, the effect is found to be minor on the surface relaxation as compared to Pd (1 1 1) clean surface. The effect of surface vibration is also investigated using a LEED code and shows no effect of the vibrational level on the IV curves, which rules out any disagreement between proper theory and LEED results of well prepared surfaces.     

Formation, stability and CO adsorption properties of PdAg/Pd(1 1 1) surface alloys

The formation, stability and CO adsorption properties of PdAg/Pd(1 1 1) surface alloys were investigated by X-ray photoelectron spectroscopy (XPS) and by adsorption of CO probe molecules, which was characterized by temperature-programmed desorption (TPD) and high resolution electron energy loss spectroscopy (HREELS). The PdAg/Pd(1 1 1) surface alloys were prepared by annealing (partly) Ag film covered Pd(1 1 1) surfaces, where the Ag films were deposited at room temperature. Surface alloy formation leads to a modification of the electronic properties, evidenced by core-level shifts (CLSs) of both the Pd(3d) and Ag(3d) signal, with the extent of the CLSs depending on both initial Ag coverage and annealing temperature. The role of Ag pre-coverage and annealing temperature on surface alloy formation is elucidated. For a monolayer Ag covered Pd(1 1 1) surface, surface alloy formation starts at ∼450 K, and the resulting surface alloy is stable upon annealing at temperatures between 600 and 800 K. CO TPD and HREELS measurements demonstrate that at 120 K CO is exclusively adsorbed on Pd surface atoms/Pd sites of the bimetallic surfaces, and that the CO adsorption behavior is dominated by geometric ensemble effects, with adsorption on threefold hollow Pd₃ sites being more stable than on Pd₂ bridge sites and finally Pd₁ a-top sites.     

Observation of hydrogen adsorption on 6H-SiC(0 0 0 1) surface

We have used coaxial impact-collision ion scattering spectroscopy (CAICISS) and time-of-flight elastic recoil detection analysis (TOF-ERDA) to investigate the adsorption of atomic hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface. It has been found that the saturation coverage of hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface is about 1.7 ML. Upon saturated adsorption of atomic hydrogen, the √3×√3 surface structure changes to the 1×1 structure. The data of the CAICISS measurements have indicated that as a result of the hydrogen adsorption, Si adatoms on the √3×√3 surface move from T₄ to on-top sites.     

Coadsorption of water and CO molecules on Ru(0 0 1) at high CO coverages: comparisons with a Ru(0 0 1) electrode surface

The coadsorption of carbon monoxide (CO) and water molecules on a Ru(0 0 1) surface has been studied by infrared spectroscopy, LEED and STM. At high CO coverage phases, a 2×2-(2CO+D₂O) structure was observed on both UHV and electrode surfaces. Electrode potential dependent structures from CO and water adlayers on an electrode surface were reproduced on a UHV surface by controlling molecular orientations of the first layer and second over-layer water molecules. At lower CO coverages, a CO band center showed coverage dependent shift down to 1444 cm⁻¹ due to an electron transfer from a lone pair of a water molecule to CO 2π^*.     

Surface states and accumulation nanolayer induced by Ba and Cs adsorption on the n-GaN(0 0 0 1) surface

The Ba and Cs adsorption on the n-GaN(0 0 0 1) surface has been studied in situ by the threshold photoemission spectroscopy using s- and p-polarized light excitation. Two surface bands induced by Ba (Cs) adsorption are revealed in surface photoemission spectra below the Fermi level. The surface-Fermi level position is found to be changed from significantly below the conduction band minimum (CBM) at clean n-GaN surface to high above the CBM at Ba, Cs/n-GaN interfaces, with the transition from depletion to electron accumulation occurring at low coverages. Photoemission from the accumulation nanolayer is found to excite by visible light in the transparency region of GaN. Appearance of an oscillation structure in threshold photoemission spectra of the Ba, Cs/n-GaN interfaces with existing the accumulation layer is found to originate from Fabry–Perot interference in the transparency region of GaN.     

Surface phonons of GaP(1 1 0) and InAs(1 1 0)

The dispersions of low energy surface phonon modes of GaP(1 1 0) and InAs(1 1 0) measured with inelastic He-atom scattering along the and 0 0 1 directions are presented. Aside from the Rayleigh mode, additional distinct acoustic modes are observed as well as indications of optical modes. Contrary to results for GaAs(1 1 0), a rocking mode was not observed. The experimentally determined phonon dispersions are in excellent agreement with recent ab initio calculations by C. Eckl, et al. [1].     

Free radical reactions at the Ru(0 0 0 1) surface: Atomic oxygen and dissociated NH3

X-ray photoelectron spectroscopy was used to study the effect of atomic oxygen on Ru(0 0 0 1), and the effect of dissociated ammonia on RuO₂/Ru(0 0 0 1), in UHV conditions at ambient temperature. The Ru(0 0 0 1) surface was exposed, at ambient temperature, to a mixed flux of atomic and molecular oxygen generated by dissociation of O₂ in a thermal catalytic cracker, with 45% dissociation efficiency. The detailed study of the XPS spectra shows the formation of a disordered multilayer oxide (RuO₂). No formation of higher oxides of Ru was observed. The formation of RuO₂ proceeded without saturation for total oxygen exposures of up to 10⁵ Langmuir, at which point an average oxide thickness of 68 Å was observed. RuO₂ formed by the reaction with atomic oxygen was exposed to a flux of NH_x (x = 1, 2) + H generated by the cracker. The reduction of RuO₂ to Ru metal was observed by XPS. An exposure of 3.6 × 10² L of NH_x + H, resulted in the observation of adsorbed H₂O and OH, but no evidence of lattice oxide. The chemisorbed species were removed by additional NH_x + H exposure. No nitrogen adsorption was observed.     

GaAs(0 0 1) surface reconstructions: geometries, chemical bonding and optical properties

We re-examine the GaAs(0 0 1) surface by means of first-principles calculations based on a real-space multigrid method. The c(4×4),(2×4) and (4×2) surface reconstructions minimize the surface energy for anion-rich, stoichiometric and cation-rich surfaces, respectively. Structural models proposed in the literature to explain the Ga-rich GaAs(0 0 1) (4×6) surface are dismissed on energetic grounds. The electronic properties of the novel ζ(4×2) structure are discussed in detail. We calculate the reflectance anisotropy of the energetically most favoured surfaces. A strong influence of the surface geometry on the optical anisotropy is found.     

First-principles study of small palladium clusters on NiAl(1 1 0) alloy surface

Theoretical calculations focused on the geometry, stability, electronic and magnetic properties of small palladium clusters Pd_n (n=1–5) adsorbed on the NiAl(1 1 0) alloy surface were carried out within the framework of density functional theory (DFT). In agreement with the experimental observations, both Ni-bridge and Al-bridge sites are preferential for the adsorption of single palladium atom, with an adsorption energy difference of 0.04 eV. Among the possible structures considered for Pd_n (n=1–5) clusters adsorbed on NiAl(1 1 0) surface, Pd atoms tend to form one-dimensional (1D) chain structure at low coverage (from Pd₁ to Pd₃) and two-dimensional (2D) structures are more stable than three-dimensional (3D) structures for Pd₄ and Pd₅. Furthermore, metal-substrate bonding prevails over metal–metal bonding for Pd cluster adsorbed on NiAl(1 1 0) surface. The density of states for Pd atoms of Pd/NiAl(1 1 0) system are strongly affected by their chemical environment. The magnetic feature emerged upon the adsorption of Pd clusters on NiAl(1 1 0) surface was due to the charge transfer between Pd atoms and the substrate. These findings may shade light on the understanding of the growth of Pd metal clusters on alloy surface and the construction of nanoscale devices.     

Adsorption and NiO(1 0 0) formation by atomic and molecular oxygen on Ni(1 1 0)

The structure of the ordered p(2 × 1) and p(3 × 1) phases of adsorbed oxygen as well as the formation of ultrathin NiO(1 0 0) layers on a Ni(1 1 0) single crystal are investigated by grazing scattering of fast hydrogen atoms. Via ion beam triangulation based on the detection of the number of emitted electrons, we obtain direct information on the structure of oxygen adsorbates and ultrathin nickel oxide layers. For oxidation using atomic instead of molecular oxygen, the gas exposure can be reduced by almost two orders of magnitude. We compare the experimental results with computer simulations based on classical projectile trajectories for grazing scattering of fast hydrogen atoms and test structure models for oxygen adsorbed on Ni(1 1 0) and NiO(1 0 0).     

Electronic surface states of Cu(1 1 0) surface

Surface states are a unique and important class of quantum states that shave an important effect on the electronic properties of Cu(1 1 0) surface. The Cu(1 1 0) surface has been studied using ultraviolet photoemission spectroscopy (PES), inverse photoemission spectroscopy (IPES), and reflection anisotropy spectroscopy (RAS), and shows a resonance in the RAS spectra at 2.1 eV due to a transition between occupied and unoccupied surface states. The unoccupied surface state involved in the RAS transition at an energy of 1.7 eV at the point of the surface Brillouin zone has been investigated using IPES and the occupied surface state is seen in PES spectra at 0.45 eV below the Fermi level. The energy difference of the surface states, 2.15 eV, is a good match to the transition energy found in the RAS experiments.     

h-BN/Ru(0 0 0 1) nanomesh: A 14-on-13 superstructure with 3.5 nm periodicity

The structure of epitaxially grown hexagonal boron nitride (h-BN) on the surface of a Ru(0 0 0 1) single crystal was investigated using surface X-ray diffraction, which showed the system to form a commensurate 14-on-13 superstructure. This result disagrees with previous reports on superstructures of the same system and arguments based on simple thermal expansion coefficient calculations. We argue that the larger observed superstructure forms because of the strong bonding of h-BN to Ru. In comparison to h-BN/Rh(1 1 1) it can accommodate more induced lateral in-plane strain- or lock-in energy over larger regions (referred to as the holes) within the superstructure, which itself can consequently become larger.     

Tailoring surface electronic states via strain to control adsorption: O/Cu/Ru(0 0 0 1)

A possible relationship between population of the surface electronic state and chemical reactivity for Cu layers on Ru(0 0 0 1) is revealed by tunneling spectroscopy and microscopy. The surface state shifts down in energy with increasing thickness. Ab initio calculations indicate that the energy shift can be assigned to the decreasing tensile strain of the deposited film. The reactivity of the surface towards oxygen correlates with the population of this state, reaching a maximum at Cu thicknesses where the surface state is empty. These data provides an indication of the effect of strain on the reactivity of metal surfaces.     

Surface alloy formation after deposition of Ce on Rh(1 1 0)

Vapour deposition of Ce onto a Rh(1 1 0) single crystal at room temperature is studied by X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS) and low energy electron diffraction (LEED). The thicknesses of the deposited Ce layers are estimated to be between 2 and 9 Å. To study the changes in the Ce-Rh surface layer, the samples are annealed at temperatures between 500 and 1000 °C after Ce deposition.After heating, a c(2 × 2) LEED pattern appears for the sample with the thinnest deposited Ce layer (2.4 Å). For samples with thicker Ce-films, the LEED pattern co-exists of a c(2 × 2) structure and a more diffuse 6% contracted (2 × 1) structure. This appears at the same temperature as the Ce 3d and Rh 3d core levels exhibit sharp intensity changes and binding energy shifts.The intensity of the f⁰, f¹ and f² multiplets in the Ce 3d core level spectra change when the annealing temperature is increased. The relative intensity of the Ce 3d f⁰ and f² features compared to the Ce 3d f¹ features is largest after annealing to 500 °C. This is below the temperature at which the ordered surface alloy is formed. When the sample is heated above the formation temperature of the surface alloy, the relative intensity of the Ce 3d f⁰ and f² features decrease.     

Interaction of CO with atomically well-defined PtxRuy/Ru(0 0 0 1) surface alloys

The interaction of CO with structurally well-defined Pt_xRu_y surface alloys supported on Ru(0 0 0 1) was investigated by thermal desorption spectroscopy and infrared reflection-absorption spectroscopy. The surface composition and the distribution of the surface atoms were controlled by high resolution scanning tunneling microscopy. On these surfaces, which have a nearly random distribution of the two surface species, the adsorption (and desorption) of CO is strongly modified compared to the pure elemental surfaces, by strain effects and electronic ligand effects. CO adsorbs exclusively in a linear configuration on Pt and Ru atoms for all surfaces investigated. The adsorption energy of CO is lowered on the alloy surfaces with respect to both Pt(1 1 1) and Ru(0 0 0 1), similar as for pseudomorphic monolayer Pt films. For both Pt and Ru sites the adsorption strength decreases with increasing Pt concentration.     

The properties of the Pt6/BaO(1 0 0) interface and NO adsorption at the interface

The properties of the Pt₆/BaO(1 0 0) interface and NO adsorption at the interface are studied using the first-principles methods based on density functional theory. It is found that strong interaction between Pt atoms and surface O atoms is responsible for the stability of the interface. The interaction of NO gas molecule and the Pt₆/BaO(1 0 0) interface showed that the NO molecule prefers to be bound to the Pt atom of the supported Pt cluster with its N-moiety.     

Water monolayer and multilayer adsorption on Ni(1 1 1)

Water adsorbed on Ni(1 1 1) forms an ordered, hydrogen bonded ice structure with a (2√7 × 2√7)R19° unit cell. The 2√7 wetting structure forms as islands and persists up to saturation of the first layer. Adsorption of a fraction of a monolayer more water into a second layer destroys the 2√7 registry and creates a disordered ice film. Gas adsorption measurements indicate that the wetting layer is completely covered by a second layer of water before thicker multilayer ice forms. As the second layer is completed the film orders to form an incommensurate crystalline ice film with a hexagonal LEED pattern, oriented to the Ni close packed rows. This ordered, incommensurate structure persists as the ice multilayer grows thicker.     

Density functional study of the adsorption of aspirin on the hydroxylated (0 0 1) -quartz surface

In this study the adsorption geometry of aspirin molecule on a hydroxylated (0 0 1) α-quartz surface has been investigated using DFT calculations. The optimized adsorption geometry indicates that both, adsorbed molecule and substrate are strongly deformed. Strong hydrogen bonding between aspirin and surface hydroxyls, leads to the breaking of the original hydroxyl–hydroxyl hydrogen bonds (Hydrogenbridges) on the surface. In this case new hydrogen bonds on the hydroxylated (0 0 1) α-quartz surface appear which significantly differ from those at the clean surface. The 1.11 eV adsorption energy reveals that the interaction of aspirin with α-quartz is an exothermic chemical interaction.