Polymerization of α-Hydroxyacetylenes by Transition Metal Catalysts

Abstract

α-Hydroxyacetylenes (2-propyn-1-ol, DL-3-butyn-2-ol, 1-octyn-3-ol, 2-phenyl-3-butyn-2-ol) with a hydroxy functional group were polymerized by various Mo- and W-based catalysts. In general, the catalytic activities of Mo-based catalysts were greater than those of W-based catalysts for these polymerizations. In the polymerization of 2-propyn-l-ol, MoCl₅ alone and the MoCl₅-EtAlCl₂ catalyst system gave a quantitative yield of polymer. In the polymerization of 2-propyn-l-ol and its homologues by Mo-based catalysts, the polymer yield decreased as the bulkiness of the substituent increased. On the other hand, the polymer yield increased as the bulkiness of the substituent increased in WCl₆-EtAlCl₂-catalyzed polymerization. Polymers with a bulkier substituent showed better solubility in organic solvents than those without a substituent [e.g., poly (2-propyn-l-ol)]. The structures of the resulting polymers were characterized by various instrumental methods such as ¹H- and ¹³C-NMR, IR, and UV-visible spectroscopies. Thermogravimetric analyses and thermal transitions of the resulting polymers were also studied.     

Poly(10-undecene-1-ol) characterized by MALDI-TOF MS and NMR spectroscopy

Poly(10-undecene-1-ol)s were synthesized by metallocene-catalyzed polymerization. MALDI-TOF MS allows obtaining detailed information on the monomer units in the polymer chains and the nature of the head and end groups of these polymers in dependence on the Al alkyl triisobutyl aluminum (TIBA) as well as methylalumoxan (MAO), both used as protecting agent for the hydroxyl groups of the monomer. The peak-to-peak distances of the main peaks could be distinctly assigned to the monomer unit 10-undecene-1-ol. Evaluating the MALDI-TOF peak distributions, polymers with -H, -C₄H₉, -CH₃ head groups in combination with vinylidene and saturated (–CH₃) end groups could be detected. By ¹H NMR spectroscopy, it was verified that with the used catalysts polymers with vinylidene end groups were obtained predominantly. The presence of saturated end groups could be proved qualitatively by combination of ¹H and ¹³C NMR spectroscopy for polymers produced by TIBA protection, which strikingly confirm the results from MALDI-TOF MS. For the polymers prepared with only MAO protection, saturated groups are also proved but discrimination between head and end groups was not possible. A polymerization mechanism corresponding to the detected different head and end groups is proposed.     

Preparation and polymerization of methylenecyclobutene and 1-methyl-3-methylenecyclobutene

Methylenecyclobutene (MCB) and 1-methyl-3-methylenecyclobutene (MMCB) were synthesized, characterized, and polymerized by anionic and cationic initiators. Structural analyses of the polymers were carried out by infrared and NMR spectros-copy. The cationic polymerization of MCB appeared to proceed entirely by a 1,5-propagation mechanism to form low molecular weight polymers in low yields. Anionic polymerization of this monomer, on the other hand, proceeded primarily through a 1,2-propagation path, again forming only low molecular weight polymeric products in low yield. In contrast to MCB, the methyl-substituted monomer, MMCB, polymerized readily with cationic initiators to produce unusually high molecular weight polymers in high conversions. On the basis of both infrared and NMR spectroscopic analyses, it was concluded that the polymers also contained essentially only 1,5-addition repeating units. Anionic initiators such as n-BuLi were unable to induce polymerization of this monomer, but polymerization by Ziegler-Natta catalysts proceeded readily to yield polymers virtually identical in structure and molecular weight to those obtained with cationic initiators.     

Ring‐opening metathesis polymerization of cis‐cyanocyclooct‐4‐ene: Search for active catalysts,variation of monomer to catalyst ratios and monomer concentrations

The ring‐opening metathesis polymerization (ROMP) of cis‐cyanocyclooct‐4‐ene initiated by ruthenium‐based catalysts of the first, second, and third generation was studied. For the polymerization with the second generation Grubbs catalyst [RuCl₂(?CHPh)(H₂IMes)(PCy₃)] (H₂IMes = N,N′‐bis(mesityl)‐4,5‐dihydroimidazol‐2‐ylidene), the critical monomer concentration at which polymerization occurs was determined, and variation of monomer to catalyst ratios was performed. For this catalyst, ROMP of cis‐cyanocyclooct‐4‐ene did not show the features of a living polymerization as M_n did not linearly increase with increasing monomer conversion. As a consequence of slow initiation rates and intramolecular polymer degradation, molar masses passed through a maximum during the course of the polymerization. With third generation ruthenium catalysts (which contain 3‐bromo or 2‐methylpyridine ligands), polymerization proceeded rapidly, and degradation reactions could not be observed. Contrary to ruthenium‐based catalysts of the second and third generation, a catalyst of the first generation was not able to polymerize cis‐cyanocyclooct‐4‐ene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hyperbranched Poly(ester‐enamine) from Spontaneous Amino‐yne Click Reaction for Stabilization of Gold Nanoparticle Catalysts

Hyperbranched polymers have garnered much attention due to attractive properties and wide applications, such as drug‐controlled release, stimuli‐responsive nano‐objects, photosensitive materials and catalysts. Herein, two types of novel hyperbranched poly(ester‐enamine) (hb‐PEEa) were designed and synthesized via the spontaneous amino‐yne click reaction of A₂ monomer (1, 3‐bis(4‐piperidyl)‐propane (A_2a) or piperazine (A_2b)) and B₃ monomer (trimethylolpropanetripropiolate). According to Flory's hypothesis, gelation is an intrinsic problem in an ideal A₂+B₃ polymerization system. By controlling the polymerization conditions, such as monomer concentration, molar ratio and rate of addition, a non‐ideal A₂+B₃ polymerization system can be established to avoid gelation and to synthesize soluble hb‐PEEa. Due to abundant unreacted alkynyl groups in periphery, the hb‐PEEa can be further functionalized by different amino compounds or their derivates. The as‐prepared amphiphilic PEG‐hb‐PEEa copolymer can readily self‐assemble into micelles in water, which can be used as surfactant to stabilize Au nanoparticles (AuNPs) during reduction of NaBH₄ in aqueous solution. As a demonstration, the as‐prepared PEG‐hb‐PEEa‐supported AuNPs demonstrate good dispersion in water, solvent stability and remarkable catalytic activity for reduction of nitrobenzene compounds.     

Chiral terpene auxiliaries IV: new monoterpene PHOX ligands and their application in the catalytic asymmetric transfer hydrogenation of ketones

New PHOX ligands, derived in three steps from (1R,2S,3R,5R)-3-amino-apopinan-2-ol 1 and (1R,2R,3S,5R)-3-amino-pinan-2-ol 2 were applied as chiral ligands for the formation of ruthenium catalysts. The catalysts were used in asymmetric transfer hydrogenations of prochiral ketones producing the corresponding alcohols in moderate to high yields and enantioselectivity.     

Norbornene‐functionalized PEO‐b‐PCL: A versatile platform for mikto‐arm star,umbrella‐like,and comb‐like graft copolymers

Well‐defined in‐chain norbornene‐functionalized poly(ethylene oxide)‐b‐poly(?‐caprolactone) copolymers (NB‐PEO‐b‐PCL) were synthesized from a dual clickable containing both hydroxyl‐ and alkyne‐reactive groups, namely heterofunctional norbornene 3‐exo‐(2‐exo‐(hydroxymethyl)norborn‐5‐enyl)methyl hexynoate. A range of NB‐PEO‐b‐PCL copolymers were obtained using a combination of orthogonal organocatalyzed ring‐opening polymerization (ROP) and click copper‐catalyzed azide–alkyne cycloaddition (CuAAC). Ring‐opening metathesis polymerization (ROMP) of NB‐PEO‐b‐PCL macromonomers using ruthenium‐based Grubbs’ catalysts provides comb‐like and umbrella‐like graft copolymers bearing both PEO and PCL grafts on each monomer unit. Mikto‐arm star A₂B₂ copolymers were obtained through a new strategy based on thiol–norbornene photoinitiated click chemistry between 1,3‐propanedithiol and NB‐PEO‐b‐PCL. The results demonstrate that in‐chain NB‐PEO‐b‐PCL copolymers can be used as a platform to prepare mikto‐arm star, umbrella‐, and comb‐like graft copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 4051–4061     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

Renewable isosorbide-enchained semi-fluorinated aromatic ether polymers

Isosorbide-based renewable semi-fluorinated polymers were synthesized via base-mediated step-growth polycondensation of isosorbide diol monomer with bis-trifluorovinyl ether (TFVE) monomer in excellent yields. As the first example employing secondary alcohols in this addition/elimination polymerization affording fluorinated arylene vinylene ether (FAVE) polymers, reasonable to high-molecular weights (10–84 kDa) and reproducible glass transition temperatures (T_g) ranging from 120 to 130°C were achieved. Containing 23–31 wt.% renewable isosorbide repeat unit, the amorphous polymers are processable in common organic solvents and form tough, transparent films. Depending on basic conditions, these renewable semi-fluorinated polymers contain reactive fluoroalkene enchainment for post-polymerization functionalization and further retain the ability to thermally crosslink without the need for catalysts or initiators. Structural characterization of this complex asymmetric polymer was determined by multi-nuclear NMR including multiple 2D-NMR techniques. Renewable FAVE chemistry based on isosorbide presents an intriguing option for alternative renewable materials containing fluorine.     

Side‐chain terpyridine polymers through atom transfer radical polymerization and their ruthenium complexes

Polymers containing side‐chain terpyridine ligands of well‐defined architectures and controllable molecular weights and molecular weight distributions are reported. These polymers were synthesized by the atom transfer radical polymerization (ATRP) of a newly synthesized terpyridine monomer with three functional initiators. The obtained polymers were characterized with ¹H NMR and gel permeation chromatography techniques. The efficiency of the ATRP technique and the overall control of the molecular characteristics of the polymers were demonstrated by a kinetic study of the polymerization reaction. Subsequently, the ruthenium(III)/ruthenium(II) complexation chemistry was employed for the attachment of bis(dodecyloxy)‐functionalized terpyridine moieties onto each side 2,2′:6′,2″‐terpyridine unit of the main polymeric backbone. Thus, the grafting approach was successfully combined with the metal–ligand coordination chemistry for the preparation of highly soluble polymeric complexes. The resulting complexes were fully characterized by means of ¹H NMR, gel permeation chromatography, and ultraviolet–visible spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4838–4848, 2005     

ADMET reactions in miniemulsion

This work investigates acyclic diene metathesis (ADMET) polymerization reactions in aqueous miniemulsion. Different types of ruthenium‐based catalysts and different surfactants (anionic, cationic, and nonionic) were evaluated. A Ru‐indenylidene catalyst (Umicore M2) showed higher activity in water if compared to the Ru‐benzylidene catalysts (Hoveyda Grubbs second generation and Grubbs first generation). Moreover, the catalyst activity was affected by the type of the surfactant. In summary, the Umicore M2 catalyst and the nonionic poly(ethylene oxide) based surfactant Lutensol AT80 were found to be the most suitable combination for ADMET reactions in miniemulsion allowing the preparation of polymers with number average molecular weight (M_n) of up to 15 kDa. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1300–1305     

Monomer sequencing and microstructural analysis on polymers of dimethyl norbornene dicarboxylate and 7‐oxanorbornene dicarboxylic derivatives employing ruthenium catalysts by ring‐opening metathesis polymerization

The physiochemical properties, comonomer sequencing, and regiospecificity of the linkages between monomeric units within homo/copolymers based on 5,6‐di‐substituted norbornene and 7‐oxanorbornene type monomers by ring‐opening metathesis polymerization are reported and correlated to their primary and secondary structural elements. In general, first‐generation Grubbs‐ I1 ruthenium catalyst generates polymers with high trans content that exhibits an extended secondary structure with exo,exo substituents, whereas second‐generation Grubbs‐ I2 catalyst produces polymers with high cis content that forms tight turns, resulting in a compact structure. Furthermore, I2 ‐produced polymers exhibit a high level of alternating cis–trans double bonds along their polymeric backbone. In stark contrast, both first‐ and second‐generation Grubbs catalysts display complete reversal in cis/trans selectivity when an oxygen atom is in position‐7 of the norbornene‐ring along with mono‐endo‐substitution in position‐5 or 6, and hence highlighting the importance of stereoelectronic complexation by the catalyst with the next incoming monomer for cis/trans selectivity. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2477–2501     

Efficient preparation of enantiomerically pure (E)-4-(tributylstannanyl)but-3-en-2-ol via lipase-mediated resolution

The practical preparation of enantiomerically pure (E)-4-(tributylstannanyl)but-3-en-2-ol 1 from 3-butyn-2-ol 2 is reported. A modified Guibé's Pd-catalyzed hydrostannation of 2 provided the racemic γ-hydroxy vinylstannane 1 in a good yield. The enzymatic esterification of 1, with an inexpensive lipozyme, afforded (R)-3 and (S)-1 with very high enantiomeric excesses and chemical yields. This procedure is suitable for the multigram scale preparation of the potential chiral building blocks, (R)-1 and (S)-1.     

Preparation and properties of novel thermotropic liquid crystalline hyperbranched polyesters composed of five‐membered heterocyclic mesogen by A2 + B3 approach

New thermotropic liquid crystalline (LC) hyperbranched (HB) polyesters containing 2,5‐diphenyl‐1,3,4‐thiadiazole (DTD) unit as mesogen in the interiors were prepared at various mole ratios (A₂/B₃) by melt and solution polycondensations of a dioxydiundecanol of DTD (A₂) and 1,2,3‐propanetricarboxylic acid (B₃) via the A₂ + B₃ approach and their LC and optical properties were investigated. FTIR and ¹H‐NMR spectroscopies indicated that all the expected HB polyesters, which show good solubilities in organic solvents, are produced without gelation during the polymerization. Among them, the HB polymer prepared in the mole ratio of A₂/B₃ = 3/2 by the solution polycondensation had the highest inherent viscositiy. DSC measurents, polarizing microscope observations of optical textures, and X‐ray analyses suggested that the LC properties of HB polymers depend on the polymerization methods and the feed mole ratios. In the HB polymers prepared using the melt polycondensation, only the polymer prepared in the mole ratio of A₂/B₃ = 3/1 formed a highly‐ordered, tilted, crystal‐like smectic phase, but all the polymers prepared by the solution polycondensation formed highly‐ordered, tilted, smectic phases. Solution and solid‐state UV‐vis and photoluminescent (PL) spectra indicated that the HB polymers show maximum absorbances and blue‐light emission on the basis of the DTD unit, where the Stokes‐shifts were observed, probably because of intermolecular aggregation effects © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2998–3008, 2007     

7-氧杂降冰片烯的官能化及其开环易位聚合

设计合成了含氧化乙烯重复单元和咪唑盐侧基的降冰片烯类单体,用Grubbs催化剂(PCy3)2Ru(CHPh)Cl2(1)和(SIMes)(PCy3)Ru(CHPh)Cl2(2)对单体进行了开环易位聚合(ROMP).考察了单体在不同条件下(溶剂、温度等)的聚合反应,尤其是在离子液体中ROMP的聚合特征.结果表明,2的催化活性比1的高;2催化单体在有机溶剂中聚合所得聚合物的分子量不可控,而在离子液体[BMIm]PF6中能够顺利进行均相聚合反应,且对聚合物的分子量可控性较好.用核磁共振谱(NMR)对合成的单体及聚合物的结构进行了表征.用差示扫描量热法(DSC)测定聚合物的玻璃化转变温度为-17.34℃,采用循环伏安法测得聚合物的电化学稳定窗口为3.0V.     

Ring opening metathesis polymerisations of norbornene and norbornadiene derivatives containing oxygen: a study on the regeneration of Grubbs catalyst

Ring opening metathesis polymerisation (ROMP) of norbornene and norbornadiene derivatives containing oxygen are investigated using Grubbs well-defined ruthenium initiator. A series of 7-alkoxy norbornadiene monomers (2b-d), containing alkoxy groups with decreasing steric hindrance in the 7-position have been prepared. The ROMP reactions of monomers showed that as the reaction proceeds the initiator is consumed first and then is partially regenerated at the expense of the propagating species. A small amount of another carbene species X, giving a broad signal at 17.44 ppm, is also formed which is extremely stable in solution. The species X is an active metathesis species and is able to perform ROMP on strained cyclic olefins. ROMP of monomers without alkoxy groups in the 7-position (3, 4a, 4b, 5a and 5b) and also monomers with alkoxy groups in the 5 and/or 6 positions of norbornene (6 and 7) have been performed under similar conditions. None of these systems exhibited regeneration of the initiator and no resonances due to species X can be seen in the ¹H NMR spectra. The results confirm that the presence of oxygen in the 7-position of the norbornadiene monomer plays an important role in the process of regeneration of the initiator. It is found that the steric bulk and the position of substituents of the monomer have a pronounced influence on the extent of regeneration of the initiator.     

Linear and A2+B3‐type hyperbranched polyesters comprising phenylbenzothiazole unit: Preparation,liquid crystalline,and optical properties

Novel liquid crystalline (LC) hyperbranched (HB) polyesters comprising phenylbenzothiazole (PBT) unit as mesogen in the interiors were prepared at various feed mole ratios (A₂/B₃) by solution polycondensation of a dioxydiundecanol derivative of PBT (A₂ monomer) with trimesic acid trimethyl ester (B₃ monomer) via A₂+B₃ approach and their LC and optical properties were investigated. Analogous linear polyesters containing the PBT unit in the main chains were also prepared by the solution polycondensation of A₂ monomer with aromatic or aliphatic dimethyl esters. FTIR and ¹H‐NMR spectroscopies indicated that the HB polyesters are produced without gelation during the polycondensation and have degree of branching (DB) of 7–46%. The structures of HB polymers changed depending on the feed mole ratios and the polymer prepared in the mole ratio of A₂/B₃ = 3/2 had the highest inherent viscosity and DB. Acetylation of terminal OH group‐having HB polyesters prepared in excess mole ratios of A₂/B₃ afforded ones bearing acetoxy groups in the terminals. DSC measurements, polarizing microscope observations of textures, and X‐ray analyses suggested that only the terminal OH group‐having HB polymer prepared in the mole ratio of A₂/B₃ = 3/1 form smectic C phase. In the linear polymers, the polymers derived by using the aromatic dimethyl esters had no LC melt, but those from the aliphatic dimethyl esters formed LC smectic C phase. The acetoxy group‐bearing HB polymers showed more stable smectic A or C phase than those with the OH terminals. Solution UV‐vis and photoluminescent (PL) spectra indicated that the linear and the HB polymers have analogous optical properties and display maximum absorbances and blue‐light emission on the basis of the PBT unit, where the Stokes shifts were observed because of intermolecular aggregation effects, but there is a large difference between the optical behaviors of the linear and the HB polymers in film, whose E_g values of the linear polymers decreased and those of the HB polymers vice versa. Quantum efficiencies (Φ) had a tendency of increase in the linear polymers and the HB polymers forming LC phases. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6688–6702, 2008     

Olefin metathesis polymerization: Some recent developments in the precise polymerizations for synthesis of advanced materials (by ROMP,ADMET)

Recent results for synthesis of end-functionalized polymers (EFP) by using olefin metathesis polymerization have been introduced including basic characteristics in ring-opening metathesis polymerization (ROMP) of cyclic olefins and acyclic diene metathesis (ADMET) polymerization for synthesis of conjugated polymers. Several approaches were demonstrated for synthesis of EFP by living ROMP using molybdenum (exclusive coupling with aldehyde) and ruthenium catalysts (sacrificial ROMP, chain transfer). Cis specific (Z selective) ROMPs were achieved by molybdenum, ruthenium, and vanadium catalysts by the ligand modification. The catalytic synthesis of EFP with high cis selectivity has been achieved by combined ROMP with chain transfer by V(CHSiMe₃)(N-2,6-Cl₂C₆H₃)[OC(CF₃)₃](PMe₃)₂. The ADMET polymerization using molybdenum and ruthenium catalysts afforded defect-free, high molecular weight poly(arylene vinylene)s containing all trans olefinic double bonds. The methods for precise synthesis of EFPs, exhibiting unique optical properties combined with the end groups, were developed. The catalytic one-pot syntheses for EFPs have also been developed.     

Understanding the effect of allylic methyls in olefin cross-metathesis

A series of NMR spectroscopy experiments have been conducted with both the model compound, 3-methyl-1-pentene and the corresponding ADMET monomer 3,6,9-trimethylundeca-1,10-diene (11) to better understand the effect of allylic methyls during olefin metathesis chemistry. Traditional ADMET catalysts such as Schrock’s molybdenum (1), and Grubbs’ ruthenium 1st and 2nd generation (2 and 3) were examined under cross-metathesis and ADMET conditions. Regardless of catalyst selection, 50% or less metathesis conversion was observed for all reactions, especially in the case of the more sterically encumbered diene. With Schrock’s molybdenum catalyst 1, the reaction leads to an accumulation of the non-productive metallacyclobutane, trapping the catalyst in an inactive form. With Grubbs’ ruthenium catalysts 2 and 3, the substrate coordinates to the metal center primarily to yield non-productive metathesis, which results in a build-up of the methylidene complex leading to catalyst decomposition. These results are directly correlated to the orientation of the substrate’s bulk during the metallacyclobutane formation, the alkyl branch being adjacent to the metal center in the case of the molybdenum catalyst 1, and opposite to it in the case of ruthenium catalyst 2 and 3.     

Hyperbranched polyimides prepared by ideal A2+B3 polymerization,non-ideal A2+B3 polymerization and AB2 self-polymerization

In this paper, hyperbranched polyimides having the same repeating unit were synthesized by employing ideal A₂+B₃ polymerization, non-ideal A₂+B₃ polymerization and AB₂ self-polymerization methods. The polymerization behavior, polymer properties were compared for three methods. Hyperbranched polyimides by ideal A₂+B₃ polymerization, non-ideal A₂+B₃ polymerization and AB₂ self-polymerization methods show apparent difference in many physical properties, such as inherent viscosity, glass transition temperature, and film formation behavior etc. The hyperbranched polymers by the non-ideal A₂+B₃ polymerization are suitable for smooth, flexible and self-standing film preparation, which provides useful information for hyperbranched polymers toward self-standing materials.