Nanosecond photoelectric effects in all-oxide p-n junction of La<Subscript>0.9</Subscript>Sr<Subscript>0.1</Subscript>MnO<Subscript>3</Subscript>/SrNb<Subscript>0.01</Subscript>Ti<Subscript>0.99</Subscript>O<Subscript>3</Subscript>

Nanosecond (ns) photoelectric effects have been observed in all-oxide p-n junctions of La_0.9Sr_0.1MnO₃/SrNb_0.01Ti_0.99O₃ for the first time. The rise time was about 23 ns and the full width at half maximum was about 125 ns for the open-circuit photovoltaic pulse when the La_0.9Sr_0.1MnO₃ thin film in the p-n junction was irradiated by a laser of ≈20 ns pulse duration and 308 nm wavelength. The photovoltaic sensitivity was 80 mV/MJ for a 308 nm laser pulse.     

Acceptor Concentration Effects on Photovoltaic Response in the La1-xSrxMnO3/SrNbyTi1-yO3 Heterojunction

Photovoltaic response in the heterojunction of La1-x SrxMnO3/SrNby Ti1-yO3 （LSMO/SNTO） is analyzed theoretically based on the drift-diffusion model. It is found that the decrease of acceptor concentration in the La1-xSrxMnO3 layer of hereto junction can increase the peak value of photovoltaic signal and the speed of photovoltaic response, whereas the changing of donor concentration in the SrNby Ti1-yO3 layer has no such evident effect. Furthermore, the result also indicates that the modulation of Sr doping in La1-xSrxMnO3 is an effective method to accommodate the sensitivity and the speed of photovoltaic response for LSMO/SNTO photoelectric devices.     

The Sr content influence on the positive magnetoresistance in La1-xSrxMnO3/Si heterojunctions

<正>We fabricated La_(1-x)Sr_xMnO_3/Si(LSMO/Si) heterojunctions with different Sr doping concentrations(x = 0.1, 0.2,0.3) in LSMO and studied the Sr content influence on magnetoresistance(MR) ratio.The hetero junctions show positive MR and high sensitivity of MR ratio in a low applied magnetic field.The MR ratio is dependent on Sr content and the low Sr doping in LSMO causes a large positive MR in LSMO/Si junctions.The MR ratio for 0.1 Sr doping in the LSMO/Si heterostructure is 116%in 100 Oe(1 Oe=79.5775 A/m) at 210 K.The mechanism for the positive MR dependence on the doping density is considered to be the competition between the tunneling rate of electrons in e_g~1↑to t_(2g)↓band and that to e_g~2↑band at the interface region of LSMO.The experimental results are in agreement with those observed in La_(0.9)Sr_(0.1)MnO_3/SrNb_(0.01)Ti_(0.99)O_3 p-n junction.The results indicate that choosing low doping concentration to improve the low field sensitivity of the heterojunction devices is a very efficacious method.     

The influence of interband tunneling on leakage current in manganite/titanate heterojunction

The behavior of leakage current at reverse bias in p-La_0.9Sr_0.1MnO₃/n-SrNb_0.01Ti_0.99O₃ heterojunction has been theoretically studied by calculating interband tunneling current with various doping densities and temperatures. Our results reveal that the reduction of leakage current with decrease of doping density and increase of temperature originates from properties of interband tunneling.     

Laser Molecular Beam Epitaxy of Multilayer Heterostructure SrNb0.05Ti0.95O3/La0.9Sr0.1MnO3 in 10000 Unit-Cell Layers

Ten thousands of unit-cell multilayer heterosturctures, [SrNb0.05 Ti0.95O3/La0.9 Sr0.1MnO3]3 （SNTO/LSMO）, have been epitaxial grown on SrTiO3 （001） substrates by laser molecular beam epitaxy. The monitor of insitu. reflection high-energy electron diffraction demonstrates that the heterosturctures are layer-by-layer epitaxial growth. Atomic force microscope observation indicates that the surface of the heterosturcture is atomically smooth. The measurements of cross-sectional low magnification and high-resolution transmission electron microscopy as well as the corresponding selected area electron diffraction reveal that the interfaces are of perfect orientation, and the epitaxial crystalline structure shows the orientation relation of SNTO（001）//LSMO（001）, and SNTO[100]//LSMO[100].     

A Magnetic resonance study of La1−x SrxMnO3 manganites

Single crystals of La_0.9Sr_0.1MnO₃ and La_0.8Sr_0.2MnO₃ manganites are examined using magnetic resonance in the temperature range 80–370 K. It is found that magnetostatic oscillations arise near the Curie temperature. The possible reasons for the appearance of additional lines in the ferromagnetic resonance (FMR) spectrum are considered, and the anisotropy field and the type of crystalline magnetic anisotropy in the La_0.8Sr_0.2MnO₃ compound are determined. It is shown that the crystalline magnetic anisotropy in the La_0.9Sr_0.1MnO₃ compound exhibits specific features associated with its type of crystal structure.     

Structural and dielectric properties of La- and Ti-modified K0.5Na0.5NbO3 ceramics

We report the results of studies of rectifying behavior, positive magneoresistance (MR), the charge-transport mechanism and the effect of an electric field on a ZnO (n)/La_0.5Pr_0.2Sr_0.3MnO₃ (LPSMO) (p)/SrNb_0.002Ti_0.998O₃ (SNTO) (n) heterostructure comprising two p–n junctions fabricated using the pulsed laser deposition technique. The heterostructure exhibits rectifying behavior over a wide temperature and field range having hysteresis in I–V behavior (forward bias) due to the tunneling of charge carriers. It is also observed that, depending on the nature of the electric field bias to n-type ZnO and SNTO, the junction resistance becomes modified, which has been explained on the basis of spin injection in the heterostructure. The observation of unconventional positive MR at room temperature has been justified on the basis of interface effects and the reduction in barrier height obtained using fitting of the I–V data by a thermionic emission model.     

Mössbauer and magnetic studies of the phase state of SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript>/La<Subscript>0.9</Subscript>Ca<Subscript>0.1</Subscript>MnO<Subscript>3</Subscript> composites

The formation of an intermediate phase in SrFe₁₂O₁₉/La_0.9Ca_0.1MnO₃ composites was demonstrated for the first time using only Mössbauer spectroscopy. The SrFe₁₂O₁₉/La_0.9Ca_0.1MnO₃ composite was prepared by the two-stage (sol–gel and hydrothermal) synthesis with varying initial conditions. The X-ray diffraction studies showed that the composite consisted of two phases: well-formed structures of manganite La_0.9Ca_0.1MnO₃ and hexagonal ferrite SrFe₁₂O₁₉. It was found that nanocrystalline La_0.9Ca_0.1MnO₃ particles with size d ? 150 nm formed in the composites at the surface of plate-like SrFe₁₂O₁₉ crystallites. The Mössbauer studies showed that the composite contained additional (intermediate) phase La_0.9Ca_0.1Mn(Fe)O₃ that formed at the interface between SrFe12O19 and La_0.9Ca_0.1MnO₃ phases. The intermediate phase concentration increased with the molar content of La_0.9Ca_0.1MnO₃; in this case, the fraction of the surface of SrFe₁₂O₁₉ crystallites coated with La_0.9Ca_0.1MnO₃ increased, which led to the increase in the total area of the interface surface and the intermediate phase concentration.     

A study on surface symmetry and interfacial enhancement of SrTiO3 by second harmonic generation

The symmetry of the surfaces of SrTiO3and slightly Nb-doped SrTiO3crystals was investigated by the optical reflected second harmonic generation technique.The good agreement between experimental and theoretical results of the second harmonic intensity dependence on the azimuth angle indicates that the SrTiO3(001)surface is with 4mm symmetry and the Nb-doped SrTiO3(111)surface with 3m symmetry.The measurements of the polarization dependent second harmonic intensity confirm that conclusion.The enhancement of the surface polarization in the structure of SrTiO3capped La0.9Sr0.1MnO3films compared with that in the La0.9Sr0.1MnO3films has been obtained.     

X-ray studies of the (La,Sr)MnO<Subscript>3</Subscript> perovskite manganite structure

X-ray studies of perovskite manganites (La_0.9Sr_0.1)_0.9MnO₃ and La_1?xSr_xMnO₃ (x = 0.1, 0.15, 0.2, 0.25) are reported. The atom positions and interatomic distances and angles are calculated as a function of Sr doping at room temperature using the FullProf software. The temperature dependences of the crystal lattice parameters and unit cell volume are investigated. The effects of structural and magnetic phase transitions on the crystal lattice parameters are studied in detail. The bulk magnetoelastic contribution to thermal expansion is studied experimentally and calculated.     

Research on charge-ordering state in La0.5Sr0.5MnO2.88 and La0.5Sr0.5Mn0.5Ti0.5O3 systems

The structural, magnetic and transport properties of La_0.5Sr_0.5MnO_2.88 and La_0.5Sr_0.5Mn_0.5Ti_0.5O₃ samples have been investigated systematically. Indeed, this series has been considered to understand the influence of physical parameters such as oxygen deficiency and titanium doping effect in undoped La_0.5Sr_0.5MnO₃ sample. Ceramic material based on La_0.5Sr_0.5MnO_2.88 exhibits interesting behaviours of charge-ordering (CO), ferromagnetic (FM) states and a good conductivity down to the lowest temperatures. The substitution of Ti for Mn destroyed drastically the CO, damaged the motion of itinerant e_g electrons and changed the local parameters of perovskite cell. A change of the structure from tetragonal to rhombohedral symmetry is observed causing a weakening of double-exchange interaction. The experiment results show that the suppression of the CO is sensitive to the variety of Mn³⁺/Mn⁴⁺ ratio. In a field of 8 T at 10 K, FM and CO phase can be evaluated to be ∼20:80 according to the μ_exp/μ_cal ratio for La_0.5Sr_0.5MnO_2.88, whereas the CO state is suppressed for La_0.5Sr_0.5Mn_0.5Ti_0.5O₃ sample, FM and anti-ferromagnetic (AFM) phase are coexisted and evaluated to be ∼54:46, respectively.     

Thickness-dependent surface morphology of La0.9Sr0.1MnO3 ultrathin films

La_0.9Sr_0.1MnO₃ (LSMO) ultrathin films with various thickness (in the range of 5-50 unit cells) are grown on (0 0 1) substrates of the single-crystal SrTi_0.99Nb_0.01O₃ by laser molecular-beam epitaxy (laser-MBE), and the surface morphology of these films were measured by scanning tunneling microscopy (STM). STM images of LSMO ultrathin film surface reveal that surface morphology becomes more flat with increasing film thickness. This study highlights the important effect of strain caused by the lattice mismatch between substrates and ultrathin films. And the results should be useful to the investigations on growing manganite perovskite materials.     

Galvanomagnetic properties of La0.7Sr0.3Mn0.9Cu0.1O3

La_0.7Sr_0.3Mn_0.9Cu_0.1O₃ ceramic samples have been obtained by the conventional method of the solid-phase reaction, and their resistivity ρ has been investigated in a temperature range from 50 to 300 K in magnetic fields B = 0–20 T. Dependences are typical of perovskite manganites with a maximum at T _max = 140–150 K and an increase in ρ near T _max with increasing external magnetic field B. It has been established that the behavior of resistivity is caused by the variable range hopping conduction mechanism ρ(T) = ρ₀(T)exp[(T ₀/T)^1/4], where ρ₀(T) ～ T ^25/4. The Mott variable range hopping conduction has been observed below the Curie temperature for La_0.7Sr_0.3Mn_0.9Cu_0.1O₃ samples (T _C ～ 300 K) in a temperature range from 300 to 200 K. The influence of Cu doping on the properties of La_0.7Sr_0.3MnO₃ samples is apparently caused by an additional distortion introduced into the crystal lattice of the material and by a weakening of the double-exchange mechanism.     

Phase separation of the spin system in the La<Subscript>0.93</Subscript>Sr<Subscript>0.07</Subscript>MnO<Subscript>3</Subscript> crystal

The magnetic state of the manganite La_0.93Sr_0.07MnO₃ in the range 4.2–290 K was studied using elastic neutron scattering. The magnetic state of this compound was found to occupy a particular place in the La_1?xSr_xMnO₃ solid-solution system, in which the antiferromagnetic type of order (LaMnO₃, T_N=139.5 K) switches to ferromagnetic ordering (La_0.9Sr_0.1MnO₃, T_C=152 K) with increasing x. In the transition state, this compound contains large-scale spin configurations of two types. A fractional crystal volume of about 10% is occupied by regions of the ferromagnetic phase with an average linear size of 200 Å, while the remainder of the crystal is a phase with a nonuniform canted magnetic structure. Arguments are presented for the phase separation of the La_0.93Sr_0.07MnO₃ spin system being accounted for by Mn⁴⁺ ion ordering.     

Experimental evidence for a magnetic two-phase state in manganites

It is found that samples of manganites La_0.9Sr_0.1MnO₃ (single crystal), Eu_0.7A_0.3MnO₃ (A=Ca, Sr; ceramics), and La_0.1Pr_0.6Ca_0.3MnO₃ and La_0.84Sr_0.16MnO₃ (thin epitaxial films) that are either field-cooled (in a magnetic field) or zero-field-cooled differ in low-temperature magnetization, and the hysteresis loop of field-cooled samples exhibits a displacement. This displacement signifies that a ferro-antiferromagnetic state occurs in these samples. The exchange integral J～10^?6 eV is calculated from this displacement, which describes the exchange Mn-O-Mn coupling through the interface ferromagnetic droplet-antiferromagnetic matrix. The magnetoresistance and volume magnetostriction of La_1?x Sr_xMnO₃ single crystals exhibit similar dependences on x, temperature, and the magnetic field in the vicinity of the Curie point, which points to the fact that these dependences are due to the same reason, namely, the occurrence of a magnetic two-phase ferro-antiferromagnetic state caused by strong s-d exchange.     

Ultrafast optical probes of dynamic behavior in La0.7Sr0.3MnO3/YBa2Cu3O7 − δ/La0.7Sr0.3MnO3 heterostructure

Ultrafast pump-optical probe spectroscopy was used to analyze carriers dynamics behavior in La_0.7Sr_0.3MnO₃/YBa₂Cu₃O_{7 ? δ}/La_0.7Sr_0.3MnO₃ heterostructure. Our results show the pump signal ΔR/R for higher laser power (such as 21 and 41 mW), below T _c , first goes positive, then crosses zero and goes negative, before relaxing back to equilibrium over a time scale of a few ten picoseconds. We extract the characteristic relaxation time of the different process by fitting the data at these powers with a three-exponential decay. For higher laser power, the long characteristic relaxation time are obtained, which implies the competition between FM order and SC order in the La_0.7Sr_0.3MnO₃/YBa₂Cu₃O_{7 ? δ}/La_0.7Sr_0.3MnO₃ heterostructure.     

Optical evidence for lattice polarons in lightly doped lanthanum manganites in paramagnetic state

The reflection and absorption spectra and the resistivity data for La_0.93Sr_0.07MnO₃, La_0.9Sr_0.1MnO₃, La_0.85Sr_0.15MnO₃, La_0.92Ca_0.08MnO₃ and La_0.85Ba_0.15MnO₃ single crystals have been collected and analyzed by using small lattice polaron theory. The activation energies of the polaron hop are determined. The lattice polarons are found to be dominated in the electronic transport and optical properties in the paramagnetic state in La_0.93Sr_0.07MnO₃, La_0.92Ca_0.08MnO₃ and La_0.85Ba_0.15MnO₃ crystals. It is shown that lattice polaron involves more than one Mn site.     

Transport parameters of granular La0.67Ca0.33MnO3 films grown on an R-plane sapphire

Precisely (100)-oriented, 200-nm thick La_0.67Ca_0.33MnO₃ films have been grown by laser ablation on a sapphire (R-plane) substrate covered by a (100)SrTiO₃/(001)Bi₂SrNb₂O₉/(001)CeO₂ trilayer buffer. The azimuthal misorientation of crystal grains (50–300 nm) in the La_0.67Ca_0.33MnO₃ films decreased by about 40% as the condensation temperature was increased ered from 760 to 810° C. The lattice parameter of the grown manganate films was reduced to 3.81–3.82 Å by enriching them with oxygen. The maximum in the temperature dependence of the electrical resistivity of the La_0.67Ca_0.33MnO₃ films grown was shifted toward lower temperatures by 20–50 K relative to its position for bulk ceramic samples of a stoichiometric composition. The largest magnetoresistance (MR=42% at H=0.4 T) was found in La_0.67Ca_0.33MnO₃ films with a Mn⁴⁺ concentration on the order of 50% (T=166 K).     

Electronic excitations in hole-doped La1−xSrxMnO3 studied by resonant inelastic X-ray scattering

We report a resonant inelastic X-ray scattering (RIXS) study on perovskite manganese oxides La_1−xSr_xMnO₃ (x=0, 0.2, and 0.4) at Mn K-absorption edge. Hole-doping effect on the electronic excitations in the strongly correlated electron systems is elucidated by comparing with undoped LaMnO₃. The scattering spectra of metallic La_0.6Sr_0.4MnO₃ show that a salient peak appears in low energies indicating the persistence of the Mott gap. At the same time, the energy gap is partly filled by doping holes and the spectral weight shifts toward lower energies. Though the peak position of the excitations shows weak dispersion in momentum dependence, RIXS intensity changes as a function of the scattering angle (2θ), which is related to the anisotropy. Furthermore, anisotropic temperature dependence is observed in La_0.8Sr_0.2MnO₃ which shows a metal-insulator transition associated with a ferromagnetic transition. We consider that the anisotropy in the RIXS spectra is possibly attributed to the correlation of the orbital degrees of freedom. The anisotropy is large in LaMnO₃ with long-range orbital order, while it is small but finite in hole-doped La_1−xSr_xMnO₃ which indicates persistence of short-range orbital correlation.     

Application of novel SIMS technique for imaging the active sites of oxygen reduction at the SOFC cathode/electrolyte interfaces

The oxygen reduction active sites were visualized around the O₂/SOFC cathode/electrolyte triple phase boundaries (TPB) by the¹⁶O/¹⁸O exchange techniques and secondary ion mass spectrometry (SIMS) analysis. The higher¹⁸O concentration is observed on the cathode top surfaces (La_0.9Sr_0.1MnO₃-mesh, Au-mesh, and Ag-porous), which suggested the promotion of oxygen adsorption and oxygen surface exchange at the cathode. The oxygen diffusion through the bulk of cathode occurred at the La_0.9Sr_0.1MnO₃-mesh and the Ag-porous cathodes, not at the Au-mesh cathode. On the YSZ surfaces after removing the cathode, the active sites for oxygen incorporation were analyzed by SIMS. The active sites for oxygen incorporation were at the La_0.9Sr_0.1MnO₃/YSZ interface as well as the TPB. On the other hand, the active sites for oxygen incorporation are limited to the TPB in the case of the Au-mesh removed YSZ surface. From the SIMS analysis, the expansion of the active sites for oxygen incorporation is less than a few μm from the TPB lines. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.