Lipid bilayer templated gold nanoparticles nanoring formation using zirconium ion coordination chemistry

We used positively charged lipids to prepare lipid bilayer assemblies (LBAs) upon which we assembled negatively charged gold nanoparticles (AuNPs). Treatment of the assembly with zirconium chloride resulted in the formation of nanorings of the diameters inversely related to the zirconium ion concentration. The nanorings were attributed to the zirconium ion coordinated AuNPs formed during the lipid bilayer budding process promoted by the acid effect of zirconium chloride. Nanoring organization was also dependent on the fluidity of lipid bilayers, an indication of LBA-assisted nanomaterials organization. We suggest that such bioorganic-inorganic hybrid assemblies coupled to unique topological and morphological variations might be useful as stimuli-responsive sensors or storage compartments for proteins or drugs.     

Quantum chemistry studies of far-infrared spectra of aromatic urethanes

Restricted Hartree-Fock and density function calculations (B3LYP), using 6-311++G(d,p), have been used to investigate the far infrared spectra of aromatic urethanes, synthesized on the basis of 2,4-and 2,6-toluene diisocyanate (2,4-TDI, 2,6-TDI), and the spectrum of ethylphenylurethane. It is shown, that the region of frequencies of 100-200cm(-1) is associated primarily with torsional vibrations of methyl groups. For almost all studied urethanes, the bands are observed in the region 385-340cm(-1), which is associated with in plane deformations of angles CCNC, COC and CNC of the urethane groups according to the calculations. The bands, observed at 300-320 and 260-280cm(-1), are assigned to in plane and out of plane deformations of the urethane skeleton, which are mixed with vibrations of methyl group connected to the benzene ring.     

Formation and catalytic activity of spherical composites with surfaces coated with gold nanoparticles

Micelle-supported gold composites with a polystyrene core and a poly(4-vinyl pyridine)/Au shell are synthesized using NaBH(4) to reduce a mixture of micelle and HAuCl(4) in acidic aqueous solution (pH approximately 2). The template micelle with a polystyrene core and a poly(4-vinyl pyridine) shell is formed by self-assembly of block copolymer polystyrene-block-poly(4-vinyl pyridine). The gold nanoparticles coated onto the surfaces of the composites possess an average diameter of about 15 nm. The composites are applied to catalyze the reduction of p-nitrophenol in the presence of NaBH(4), and the results indicate that the kinetic constant of the reaction increases when the composite concentration and the reaction temperature increase. In addition, research results also indicate that composites with high content of gold show higher catalytic activity and higher catalytic efficiency.     

Organometallic chemistry and catalysis on gold metal surfaces

As in transition metal complexes, CN-R ligands adsorbed on powdered gold undergo attack by amines to give putative diaminocarbene groups on the gold surface. This reaction forms the basis for the discovery of a gold metal-catalyzed reaction of CN-R, primary amines (R′NH₂) and O₂ to give carbodiimides (R′-NCN-R). An analogous reaction of CO, RNH₂, and O₂ gives isocyanates (R-NCO), which react with additional amine to give urea (RNH)₂CO products. The gold-catalyzed reaction of CN-R with secondary amines (HNR′₂) and O₂ gives mixed ureas RNH(CO)NR′₂. In another type of gold-catalyzed reaction, secondary amines HN(CH₂R)₂ react with O₂ to undergo dehydrogenation to the imine product, RCHN(CH₂R). Of special interest is the high catalytic activity of gold powder, which is otherwise well-known for its poor catalytic properties.     

Characteristic near-field spectra of single gold nanoparticles

We report on results for the in silico screening of a database of 10 000 flexible compounds against various crystal structures of the thymidine kinase enzyme complexed with 10 known inhibitors. We provide a quantitative analysis of the deviations in the ranking of the inhibitors depending on the choice of receptor conformation and imply that the inclusion of side-chain degrees of freedom to the receptor would significantly improve the predictive power of the screening approach. We suggest a consensus score that, in the case of several known native structures of the receptor, enables the evaluation of scoring functions without the requirement of explicit receptor-flexibility.     

Electrocatalytic hydrogen redox chemistry on gold nanoparticles

Electrocatalytic proton reduction leading to the formation of adsorbed molecular hydrogen on gold nanoparticles of 1-3 and 14-16 nm diameter stabilized by 1-mercapto-undecane-11-tetra(ethyleneglycol) has been demonstrated by cyclic voltammetry using a hanging mercury drop electrode. The nanoparticles were adsorbed to the electrode from aqueous dispersion and formed robust surface layers transferrable to fresh base electrolyte solutions. Unique electrocatalytic proton redox chemistry was observed that has no comparable counterpart in the electrochemistry of bulk gold electrodes. Depending on size, the nanoparticles have a discrete number of electrocatalytically active sites for the two-electron/two-proton reduction process. The adsorbed hydrogen formed is oxidized with the reverse potential sweep. These findings represent a new example of qualitative different behavior of nanoparticles in comparison with the corresponding bulk material.     

Nanocompatible chemistry toward fabrication of target-specific gold nanoparticles

Nanocompatible chemistry which utilizes a novel nontoxic phosphino amino acid as a reducing agent has resulted in the development of therapeutically useful gold nanoparticles under biologically benign media. Stabilization of gold nanoparticles by the edible gum arabic matrix has provided an effective pathway toward in vivo stable target-specific gold nanoparticles.     

Design of liquid-crystalline gold nanoparticles by click chemistry

Mesomorphic alkyne-based first- and second-generation dendrons were grafted onto gold nanoparticles carrying azide groups under click reaction conditions. The nanoparticles decorated with the dendrons displayed liquid-crystalline properties and good thermal stability.     

Surface chemistry of gold nanoparticles for health-related applications

Functionalization of gold nanoparticles is crucial for the effective utilization of these materials in health-related applications. Health-related applications of gold nanoparticles rely on the physical and chemical reactions between molecules and gold nanoparticles. Surface chemistry can precisely control and tailor the surface properties of gold nanoparticles to meet the needs of applications. Gold nanoparticles have unique physical and chemical properties, and have been used in a broad range of applications from prophylaxis to diagnosis and treatment. The surface chemistry of gold nanoparticles plays a crucial role in all of these applications. This minireview summarizes these applications from the perspective of surface chemistry and explores how surface chemistry improves and imparts new properties to gold nanoparticles for these applications.

Functionalization of gold nanoparticles is crucial for the effective utilization of these materials in health-related applications.     

Zwitterionic dithiocarboxylates derived from N-heterocyclic carbenes: coordination to gold surfaces

The zwitterionic dithiocarboxylates 1(+)-CS(2)(-)-4(+)-CS(2)(-) were prepared by reacting the corresponding N-heterocyclic carbenes 1,3-bis(2,6-diisoproylphenyl)imidazol-2-ylidene (1), 1,3-diisopropylimidazol-2-ylidene (2), 1,3-dibenzylimidazol-2-ylidene (3) and 1,3-diethylbenzimidazol-2-ylidene (4) with CS(2). In the latter two cases, the corresponding N-heterocylic carbene was generated in situ. Compounds 2(+)-CS(2)(-)-4(+)-CS(2)(-) were structurally characterised by single-crystal X-ray diffraction studies. The chemisorption of these zwitterionic dithiocarboxylates on solid gold substrates was investigated in situ and in real time by optical second harmonic generation (SHG). The resulting thin films were exemplarily characterised by near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS) in the case of 1(+)-CS(2)(-) and 2(+)-CS(2)(-), revealing the formation of almost contamination-free self-assembled monolayers, which exhibit a remarkable degree of orientational order.     

Nucleation of gold nanoparticles on latex particle surfaces

Gold particles were nucleated on functionalized (i.e., sulfonate or imidazole groups) latex particle surfaces. Gold ions were associated with the functional groups present on the surface of the latex particles by metal‐ligand formation and were then reduced to nucleate gold particles on the particle surface. The use of imidazole groups favored the metal‐ligand formation more effectively compared with sulfonic acid groups, so gold nucleation was investigated on the surface of imidazole‐functionalized model latex particles. The desorption of gold atoms or their surface migration first occurred during the reduction process and then gold nanoparticles were nucleated. The utilization of strong reductants, such as NaBH₄ and dimethylamine borane (DMAB) under mildly acidic conditions (i.e., pH 4) led to the deprotonation of imidazole‐rich polymer chains present on the surface of the model latex particles followed by deswelling of hydrophilic polymer surface layers. As a result, well‐dispersed gold nanoparticles were embedded in the hydrophilic polymer surface. On the other hand, the use of weak reductants led to the formation of localized gold aggregates on the surface of the latex particles. The removal of residual styrene monomer is very important because gold ions can be coordinated with the vinyl groups present in styrene monomer and would then be reduced by nucleophilic water addition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 912–925, 2008     

Stability of radical-functionalized gold surfaces by self-assembly and on-surface chemistry

We have investigated the radical functionalization of gold surfaces with a derivative of the perchlorotriphenylmethyl (PTM) radical using two methods: by chemisorption from the radical solution and by on-surface chemical derivation from a precursor. We have investigated the obtained self-assembled monolayers by photon-energy dependent X-ray photoelectron spectroscopy. Our results show that the molecules were successfully anchored on the surfaces. We have used a robust method that can be applied to a variety of materials to assess the stability of the functionalized interface. The monolayers are characterized by air and X-ray beam stability unprecedented for films of organic radicals. Over very long X-ray beam exposure we observed a dynamic nature of the radical–Au complex. The results clearly indicate that (mono)layers of PTM radical derivatives have the necessary stability to withstand device applications.

We have investigated the radical functionalization of gold with a derivative of the perchlorotriphenylmethyl radical using two methods: by chemisorption from the radical solution and by on surface chemical derivation from a precursor.     

Probing BSA binding to citrate-coated gold nanoparticles and surfaces

The interaction of bovine serum albumin (BSA) with gold colloids and surfaces was studied using zeta-potential and quartz crystal microbalance (QCM) measurements, respectively, to determine the surface charge and coverage. The combination of these two measurements suggests that BSA binding to gold nanoparticles and gold surfaces occurs by an electrostatic mechanism when citrate is present. The binding of BSA to bare gold is nearly two times greater than the binding of BSA to a citrate-coated gold surface, suggesting that protein spreading (denaturation) on the surface may occur followed by secondary protein binding. On the other hand, binding to citrate-coated gold surfaces can be fit to a Langmuir isotherm model to obtain a maximum surface coverage of (3.7 +/- 0.2) x 10(12) molecules/cm(2) and a binding constant of 1.0 +/- 0.3 microM(-1). The zeta-potential measurements show that the stabilization of colloids by BSA has a significant contribution from a steric mechanism because the colloids are stable, even at their isoelectric point (pI approximately 4.6). To be consistent with the observed phenomena, the electrostatic interactions between BSA and citrate must consist of salt-bridges, for example, of the carboxylate-ammonium type, between the citrate and the lysine on the protein surface. The data support the role of strong electrostatic binding but do not exclude contributions from steric or hydrophobic interactions with the surface adlayer.     

The temperature-dependence of the far-infrared spectra of l-alanine

Far-i.r. spectra in the region 20–600 cm⁻¹ are reported for solid l-alanine as a function of temperature between 6 and 300 K. Understanding of the temperature-sensitive as well as the temperature-insensitive bands is aided by the normal coordinate analysis of l-alanine. Bands containing contributions from hydrogen bonds, skeletal deformation and NH³₊ torsion are found to be highly sensitive to temperature changes. Although the hydrogen bonds are stronger at lower temperatures, no evidence of amide formation is detected even at 6 K. Thus the zwitterion form seems to be more stable than the amide form in the temperature range studied here.     

Self-assembly of lysozyme on the surfaces of gold nanoparticles

The interaction of lysozyme(Lys) and gold nanoparticles was investigated via UV-vis absorption and resonance light-scattering method.There are some changes of the plasmon absorption and resonance light-scattering of gold nanoparticles that were observed via the addition of Lys.The normalized plasmon absorption and resonance light-scattering intensity with gold nanoparticles were both linear wilh 1-20 nmol/L Lys.A simple model about the component of the gold nanoparticles and Lys complex was established and the calculated result was fitted well in their concentration ratio.Furthermore,the activity analysis of Lys showed that the interaction was weak and nondestructive.     

The coordination chemistry ofN-vinylimidazole

Summary The synthesis of coordination compounds of formula M(viz)_n(A)₂ is described, where viz. =N-vinylimidazole, M = Mn, Fe, Co, Ni, Cu, Zn or Cd, A = ClO ₄ ^– , BF ₄ ^– or NO ₃ ^– , and n varies from 3 to 6, depending upon the particular combination of cation and anion. The compounds are easily prepared in ethanol from the hydrated metal(II) salts and the ligand and the products were characterized using i.r., ligand-field, far-i.r. and e.p.r. spectra in conjunction with x-ray powder diagrams and magnetic techniques. Octahedral cations [M(viz)₆]²⁺ are formed in many cases, although square planar species Cu(viz)₄(A)₂ and tetrahedral species [M(viz)₄]²⁺ for M = Co and Zn are also found.Compared withN-alkylimidazole ligands, viz behaves differently in some cases, resulting in special effects in the crystal packing, and can be related to the quite rigid ligand structure. The pyridine-type N-atom of the imidazole ring appears to be coordinated; in all compounds no evidence is found for C=C double bond coordination.     

Formation of gold nanoparticles catalyzed by platinum nanoparticles: assessment of the catalytic mechanism

The understanding of how the formation of metal nanoparticles in aqueous solutions is influenced by the presence of presynthesized nanoparticles is important for precise control over size, shape, and composition of nanoparticles. New insights into the catalytic mechanism of Pt nanoparticles are gained by studying the formation of gold nanoparticles from the reduction of AuCl(4)(-) in aqueous solution in the presence of presynthesized Pt nanoparticles as a model system. The measurement of changes of the surface plasmon resonance band of gold nanoparticles, along with TEM analysis of particle size and morphology, provided an important means for assessing the reaction kinetics. The reductive mediation of Pt-H species on the Pt nanocrystal surface is believed to play an important role in the Pt-catalyzed formation of gold nanoparticles. This important physical insight is evidenced by comparison of the rates of the Pt-catalyzed formation of gold nanoparticles in the presence and in the absence of hydrogen (H(2)), which adsorb dissociatively on a Pt nanocrystal surface forming Pt-H species. Pt-H effectively mediates the reduction of AuCl(4)(-) toward the formation of gold nanoparticles. Implications of the findings to the controllability over size, composition, and morphology of metal nanoparticles in the aqueous synthesis environment are also discussed.     

A coordination cage hosting ultrafine and highly catalytically active gold nanoparticles

Ultrafine metal nanoparticles (MNPs) with size <2 nm are of great interest due to their superior catalytic capabilities. Herein, we report the size-controlled synthesis of gold nanoparticles (Au NPs) by using a thiacalixarene-based coordination cage CIAC-108 as a confined host or stabilizer. The Au NPs encapsulated within the cavity of CIAC-108 (Au@CIAC-108) show smaller size (∼1.3 nm) than the ones (∼4.7 nm) anchored on the surface of CIAC-108 (Au/CIAC-108). The cage-embedded Au NPs can be used as a homogeneous catalyst in a mixture of methanol and dichloromethane while as a heterogeneous catalyst in methanol. The homogeneous catalyst Au@CIAC-108-homo exhibits significantly enhanced catalytic activities toward nitroarene reduction and organic dye decomposition, as compared with its larger counterpart Au/CIAC-108-homo and its heterogeneous counterpart Au@CIAC-108-hetero. More importantly, the as-prepared Au@CIAC-108-homo possesses remarkable stability and durability.

The size-controlled synthesis of Au NPs was achieved by using a coordination cage CIAC-108 as a support. The Au NPs encapsulated within the cavity of CIAC-108 show smaller size (∼1.3 nm) than the ones (∼4.7 nm) anchored on the surface of CIAC-108.     

Formation of gold nanoparticles using amine reducing agents

We report on the use of amines as reducing agents in the formation of gold nanoparticles. We can predict whether the amines will function as reducing agents in this reaction based on their redox properties. The kinetics of AuNP formation can be understood in terms of Marcus electron transfer theory, where the slower reactions proceed in the inverted region owing to the difference between the Au reduction potential and the amine oxidation potential. For a certain number of the amine reducing agents, following reduction of HAuCl4, a subsequent reaction of the amine radical cation with other reducing agent molecules in solution can form poly(amine)s. These findings point collectively to the utility of amines as reducing agents in AuNP formation and provide information on the conditions under which these reactions will proceed.