Thermoelastic damping in micro-scale circular plate resonators

The governing equations of coupled thermoelastic problems are established for out-of-plane vibration of a circular plate. The analytical expression for thermoelastic damping is obtained. Then the thermoelastic damping is studied under different environmental temperature, plate dimensions and boundary conditions.     

Damping in micro-scale generalized thermoelastic circular plate resonators

The out-of-plane vibrations of a generalized thermoelastic circular plate are studied under different environmental temperature, plate dimensions and boundary conditions. The analytical expressions for thermoelastic damping of vibration and phase velocity of circumferential surface wave modes are obtained. It is noticed that the damping of vibrations and phase velocities of circumferential surface wave modes significantly depend on thermal relaxation time in addition to thermoelastic coupling in circular plates under resonance conditions. The surface conditions also impose significant effects on the vibrations of such resonators. The expressions for displacement and temperature fields in the plate resonator are also derived and obtained. Some numerical results have also been presented for illustration purpose in case of silicon material plate.     

Analysis of thermoelastic dissipation in circular micro-plate resonators using the generalized thermoelasticity theory of dual-phase-lagging model

This study investigates the thermoelastic dissipation of micro-plate resonators by using the generalized thermoelasticity theory of dual-phase-lagging model. Explicit formulae of thermoelastic damping and frequency shift are derived. Influences of the plate thickness and vibration frequency on the thermoelastic damping are examined. Phenomena distinct from those of classical theory are observed in the numerical results of thermoelastic damping in micro-plate resonators. These results may bring new insights into the study of thermoelastic damping at submicrometer or nanometer scale.     

Nonlinear longitudinal waves in the presence of the interaction between the strain and temperature fields and the field of nonequilibrium atomic defects

The propagation of nonlinear longitudinal waves in a plate is studied by taking into account the interaction of the longitudinal displacement component with the temperature field and the field of concentration of nonequilibrium atomic point defects. A nonlinear evolution equation is derived for describing the self-consistent thermoelastic longitudinal strain fields. It is shown that the thermoelastic effect on the strain waves manifests itself in the appearance of dissipative terms, which describe the heat transfer and the thermoelastic interaction caused by the strain-induced heat release due to the recombination of nonequilibrium atomic defects. The soliton solutions to the evolution equation are investigated, and the characteristic features of their damping are considered with allowance for the low-frequency and high-frequency losses.     

Thermoelastic damping in torsion microresonators with coupling effect between torsion and bending

Predicting thermoelastic damping (TED) is crucial in the design of high Q MEMS resonators. In the past, there have been few works on analytical modeling of thermoelastic damping in torsion microresonators. This could be related to the assumption of pure torsional mode for the supporting beams in the torsion devices. The pure torsional modes of rectangular supporting beams involve no local volume change, and therefore, they do not suffer any thermoelastic loss. However, the coupled motion of torsion and bending usually exists in the torsion microresonator when it is not excited by pure torque. The bending component of the coupled motion causes flexural vibrations of supporting beams which may result in significant thermoelastic damping for the microresonator. This paper presents an analytical model for thermoelastic damping in torsion microresonators with the coupling effect between torsion and bending. The theory derives a dynamic model for torsion microresonators considering the coupling effect, and approximates the thermoelastic damping by assuming the energy loss to occur only in supporting beams of flexural vibrations. The thermoelastic damping obtained by the present model is compared to the measured internal friction of single paddle oscillators. It is found that thermoelastic damping contributes significantly to internal friction for the case of the higher modes at room temperature. The present model is validated by comparing its results with the finite-element method (FEM) solutions. The effects of structural dimensions and other parameters on thermoelastic damping are investigated for the representative case of torsion microresonators.     

Quality factors for the nano-mechanical tubes with thermoelastic damping and initial stress

The Quality factors (Q-factor) are defined as the ratio of the kinetic and potential energy to dissipation for various damping mechanisms of structures. Therefore, improvement in the Q-factors is an important issue in micro- and nano-resonator applications for the high performance. Also, it is well known that the thermoelastic damping is more crucial than the other damping factors in a device. Thus, the vibration of nano-mechanical circular tube is investigated with thermoelastic damping and initial stress effects in this work. To simplify the shell equations for the transverse displacement-dominated problems, the Donnell-Mushtari-Vlasov (DMV) approach is adopted. Applying the stress function, the equations of motion for deflection, compatibility equation and heat conduction equation are derived. Using an iterative scheme, the natural frequencies and the Q-factors under the initial stress are obtained, and the influences of the dimensions of the shell, the mode numbers and initial stress are discussed in detail.     

Thermoelastic vibrations in micro-/nano-scale beam resonators with voids

In this paper the closed form expressions for the transverse vibrations of a homogenous isotropic, thermoelastic thin beam with voids, based on Euler-Bernoulli theory have been derived. The effects of voids, relaxation times, thermomechanical coupling, surface conditions and beam dimensions on energy dissipation induced by thermoelastic damping in (micro-electromechanical systems) MEMS/(nano-electromechanical systems) NEMS resonators are investigated for beams under clamped and simply supported conditions. Analytical expressions for deflection, temperature change, frequency shifts and thermoelastic damping in the beam have been derived. Some numerical results with the help of MATLAB programming software in case of magnesium like material have also been presented. The computer simulated results in respect of damping factor and frequency shift have been presented graphically.     

Analysis of Frequency Spectrum of Laser-Induced Vibration of Microbeam Resonators

The vibration phenomenon during pulsed laser heating of micro-beams is investigated. The beam is made of silicon and is heated by a laser pulse with a non-Gaussian temporal profile and with an ultrashort pulse duration of 2ps, which incites vibration due to the thermoelastic damping effect. This coupled thermoelastic problem is solved using an analytical-numerical technique based on the Laplace transformation. The damping ratio and resonant frequency shift ratio of beams due to the air damping effect and the thermoelastic damping effect are also examined and discussed.     

Suppression of thermoelastic damping in MEMS beam resonators by piezoresistivity

Microelectronic mechanical (MEM) beam resonators with high quality factors are always preferred in practical applications. As one of the damping sources, thermoelastic damping (TED) caused by irreversible heat flows is usually considered as an upper limit of the overall damping effect. A new method is proposed in this work to compensate TED by taking advantage of the piezoresistive effect. Such a method is implemented by applying an electrostatic field along the beam length with a negative piezoresistive coefficient. During a resonance, the stretched part of the beam generates a higher electrical power density and thus a higher temperature, while the compressed region leads to a lower temperature. Such a temperature distribution is opposite to the temperature change caused by the thermoelastic effect. The working principle is described by a set of coupled differential equations, which are subsequently solved by the finite element method. The result indicates that the TED in the beam resonators can be completely compensated when the strength of electrical field is tuned to a critical value, namely CEF. The value of the CEF is further analyzed by a series of parametric studies on various material properties and geometric factors.     

Thermoelastic damping effect on in-extensional vibration of rotating thin ring

Sensitive devices such as resonant sensors and radio frequency micro-electro-mechanical system (RF-MEMS) filters etc., require high Quality factors (Q-factors) defined as the ratio of total system energy to dissipation that occurs due to various damping mechanisms. Also, thermoelastic damping is considered to be one of the most important factors to elicit energy dissipation due to the irreversible heat flow of oscillating structures in the micro scales. In this study, the Q-factor for thermoelastic damping is investigated in rotating thin rings with in-plane vibration. First, in order to obtain the temperature profile of the model, a heat conduction equation for the thermal flow across the radial direction is solved based on the bending approximation so-called in-extensional approximation of the ring. Using the temperature distribution coupled with a displacement, a governing equation of the ring model can then be derived. Eventually, an eigen-value analysis is performed to obtain the natural frequency of rotating thin rings, and the analytical and numerical values of Q-factors can then be determined by the definition. Furthermore, the effects of rotating speed, dimensions of the ring, mode numbers and ambient temperatures on the Q-factor are discussed in detail.     

Time-domain simulation of damped impacted plates. I. Theory and experiments

A time-domain formulation for the flexural vibrations in damped rectangular isotropic and orthotropic plates is developed, in order to investigate transient excitation of plates by means of sound synthesis. The model includes three basic mechanisms of damping (thermoelasticity, viscoelasticity and radiation) using a general differential operator. The four rigidity factors of the plate are modified by perturbation terms, each term corresponding to one specific damping mechanism. The first damping term is derived from the coupling between the thermoelastic stress-strain relations and the heat diffusion equation. The second term is obtained from the general differential formulation of viscoelasticity. The third term is obtained through a Pade approximation of the damping factor which governs the coupling of the plate with the surrounding air. The decay factors predicted by the model reproduce adequately the dependence on both dimensions and frequency of the decay factors measured on rectangular plates of various sizes and thicknesses made of four different materials (aluminum, glass, carbon fiber, and wood). The numerical resolution of the complete problem, including initial and boundary conditions, and the comparison between real and simulated sounds are presented in a companion paper.     

Point mobility of a cylindrical plate incorporating a tapered hole of power-law profile

The paper describes the results of experimental measurements of point mobility carried out on circular plates containing tapered holes of quadratic power-law profile with attached damping layers. The obtained results are compared to the developed numerical model, as a means of validation. The profiles of the tapered hole in the plates are designed to replicate near zero reflection of quasi-plane waves from a tapered hole in geometrical acoustics approximation, also known as acoustic black hole effect. The driving point mobility measurements are provided, showing a comparison of the results for a constant thickness circular plate, a constant thickness plate with a layer of damping film applied and a plate with a quadratic power-law profile machined into the center, which is tested with a thin layer of elastic damping material attached. The results indicate a substantial suppression of resonant peaks, agreeing with a numerical model, which is based on the analytical solution available for the vibration of a plate with a central quadratic power-law profile. The paper contains results for the case of free boundary conditions on all edges of the plates, with emphasis placed on the predictions of resonant frequencies and the amplitudes of vibration and loss factor.     

Circumferential thermoelastic waves in orthotropic cylindrical curved plates without energy dissipation

In this article, the propagation of guided thermoelastic waves in the circumferential direction of orthotropic cylindrical curved plates subjected to stress-free, isothermal boundary conditions is investigated in the context of the Green-Naghdi (GN) generalized thermoelastic theory (without energy dissipation). The coupled wave equations and heat conduction equation are solved by the Legendre orthogonal polynomial series expansion approach. The convergency of the method is discussed through a numerical example. The dispersion curves of thermal modes and elastic modes are illustrated simultaneously. Dispersion curves of the corresponding pure elastic cylindrical plate are also shown to analyze the influence of the thermoelasticity on elastic modes. The displacement, temperature and stress distributions are shown to discuss the differences between the elastic modes and thermal modes. A thermoelastic cylindrical plate with a different ratio of radius to thickness is considered to discuss the influence of the ratio on the characteristics of circumferential thermoelastic waves.     

Generalized thermoelastic Lamb waves in a plate bordered with layers of inviscid liquid

The propagation of thermoelastic waves in a homogeneous isotropic, thermally conducting plate bordered with layers of inviscid liquid or half-space of inviscid liquid on both sides is investigated in the context of generalized theories of thermoelasticity. Secular equations for the plate in closed form and isolated mathematical conditions for symmetric and antisymmetric wave modes in completely separate terms are derived. The results for coupled and uncoupled theories of thermoelasticity have been obtained as particular cases. The different regions of secular equations are obtained and special cases, such as Lame modes, thin plate waves and short wavelength waves of the secular equations are also discussed. The secular equations for thermoelastic leaky Lamb waves are also obtained and deduced. The amplitudes of displacement components and temperature change have also been computed and studied. Finally, the numerical solution is carried out for an aluminum-epoxy composite and aluminum materials plate bordered with water. The dispersion curves for symmetric and antisymmetric thermoelastic wave modes and amplitudes of displacement and temperature change in case of fundamental symmetric (S₀) and skew symmetric (A₀) modes are presented in order to illustrate and compare the theoretical results. The theory and numerical computations are found to be in close agreement. The results have been deduced and compared with the relevant publications available in the literature at the relevant stages of the work.     

Dynamic stability of thermoelastic coupling moving plate subjected to follower force

The dynamic characteristics and stability of the moving thermoelastic coupling rectangular plate subjected to uniformly distributed tangential follower force are investigated. Based on the heat conduction equation containing the thermoelastic coupling term and the thin plate theory, the thermoelastic coupling differential equation of motion of the rectangular plate under the action of uniformly distributed tangential follower force is established. Dimensionless complex frequencies of the moving thermoelastic coupling rectangular plate with four edges simply supported, two opposite edges simply supported and other two edges clamped are calculated by the differential quadrature method. The effects of the dimensionless thermoelastic coupling factor and dimensionless moving speed on the stability and critical load of the moving plate are analyzed. The results show that the divergence loads of the first order mode increase with the increase of the dimensionless thermoelastic coupling factor, and decrease with increasing the dimensionless moving speed.     

Transverse Vibration and Stability Analysis of Circular Plate Subjected to Follower Force and Thermal Load

Transverse vibration and stability analysis of circular plate subjected to follower force and thermal load are analyzed . B ased on the thin plate theory in involving the variable temperature, the differential equation of transverse vibration for the axisymmetric circular plate subjected to follower force and thermal load is established. Then, the differential equation of vibration and corresponding boundary conditions are discretized by the differential quadrature method. Meanwhile, the generalized eigenvalue under three different boundary conditions are calculated. In this case, the change curve of the first order dimensionless complex frequency of the circular plate subjected to the follower force in the different conditions with the variable temperature coefficient and temperature load is analyzed. The stability and corresponding critical loads of the circular plate subjected to follower force and thermal load with simply supported edge, clamped edge and free edge are discussed. The results provide theoretical basis for improving the dynamic stability of the circular plate.     

Calculation of thermoelastic stresses near the crystallization front for melt-grown single-crystal rods with a circular cross section

Approximate expressions for the thermoelectric stress tensor components in an isotropic crystal rod of a circular cross section, applicable in the entire crystal including the region near the crystallization front, are obtained. Using the resultant approximate formulas, the stress fields in leucosapphire single crystals are calculated for model temperature fields. It is shown that exactly near the crystallization front, thermoelastic stresses reach maximal values.     

Flexural and transversal wave motion in homogeneous isotropic thermoelastic plates by using asymptotic method

The present investigation is concerned with the flexural and transversal wave motion in an infinite, transversely isotropic, thermoelastic plate by asymptotic method. The governing equations for the flexural and transversal motions have been derived from the system of three-dimensional dynamical equations of linear theory of coupled thermoelasticity. The asymptotic operator plate model for free vibrations; both flexural and transversal, in a homogenous thermoelastic plate leads to fifth degree and cubic polynomial secular equations, respectively, that governs frequency and phase velocity of various possible modes of wave propagation at all wavelengths. All the coefficients of differential operator have been expressed as explicit functions of the material parameters. The velocity dispersion equations for the flexural and transversal wave motion have been deduced from the three-dimensional analog of Rayleigh-Lamb frequency equation for thermoelastic plate waves. The approximations for long and short waves and expression for group velocity have also been derived. The thermoelastic Rayleigh-Lamb frequency equations for the considered plate are expanded in power series in order to obtain polynomial frequency and velocity dispersion relations whose equivalence is established with that of asymptotic method. The dispersion curves for phase velocity, group velocity and attenuation coefficient of various flexural and transversal wave modes are shown graphically for aluminum-epoxy material elastic and thermoelastic plates.     

脉冲热能沉积薄板中热弹性弯曲运动的分析

研究脉冲热能沉积薄板中,由于板厚方向的温度梯度和空间径向温度Gauss分布状态,所产生的辐射热能引起的弯曲运动效应。文章从非耦合的经典的Bernoulli—Euler理论出发,得到热弯曲动力学方程,求解初值问题,利用Laplace变换和Hankel变换,针对短脉冲和连续热辐射进行了分析,并给出热弹性弯曲波的数值计算结果。与文献[8]的实验结果比较,二者是相符的。     

Optimal Damping of Perturbations of Moving Thermoelastic Panel

The translational motion of a thermoelastic web subject to transverse vibrations caused by initial perturbations is considered. It is assumed that a web moving with a constant translational velocity is described by the model of a thermoelastic panel simply supported at its ends. The problem of optimal damping of vibrations when applying active transverse actions is formulated. For solving the optimization problem, modern methods developed in control theory for systems with distributed parameters described by partial differential equations are used.