轴向冲击载荷作用下双壁碳纳米管的动力屈曲

应用改进的有限元方法,建立考虑层间范德华力作用的壳-弹簧非线性有限元模型,基于B-R运动准则,系统地研究了双壁碳纳米管的动力屈曲问题,得到了轴向冲击载荷作用下双壁碳纳米管的临界动力屈曲载荷和临界动力失效载荷. 研究结果表明,在动力屈曲过程中,双壁碳纳米管层间距的变化非常小,各管的变形相互协调;碳纳米管中应力波的传播导致碳纳米管出现非对称屈曲模态,可明显观测到四个环向波瓣,沿着碳纳米管的轴线方向,四个波瓣的波峰和波谷交替变化. 对碳纳米管动力屈曲问题的研究表明,冲击载荷的大小和持续时间对碳纳米管的动力屈曲有 关键词： 碳纳米管 动力屈曲 冲击载荷     

Buckling analysis of carbon nanotube bundles under axial compressive,bending and torsional loadings via a structural mechanics model

A structural mechanics model is employed for the investigation of the buckling behavior of carbon nanotube bundles of three single-walled carbon nanotubes (SWCNTs) under axial compressive, bending and torsional loadings. The effects of van der Waals (vdW) forces are further modeled using a nonlinear spring element.The effects of different types of boundary conditions are studied for nanotubes with various aspect ratios. The results reveal that bundles comprising longer SWCNTs exhibit lower critical buckling load. Moreover, for the fixed-free boundary condition the rate of critical buckling load reduction is highest, while the lowest critical buckling load occurs. Simulations show good agreement between our model and molecular dynamics results.     

Influence of temperature change on column buckling of multiwalled carbon nanotubes

Based on theory of thermal elasticity mechanics, an elastic multiple column model is developed for column buckling of MWNTs with large aspect ratios under axial compression coupling with temperature change. In this model, each of the nested concentric tubes is regarded as an individual column and the deflection of all the columns is coupled together through the van der Waals interactions between adjacent tubes. The thermal effect is incorporated in the formulation. Following this model, an explicit expression is derived for the critical buckling strain for a double-walled carbon nanotube. The influence of temperature change on the buckling strain is investigated. It is concluded that the effect of temperature change on the buckling strain is dependent on the temperature changes, the aspect ratios, and the buckling modes of carbon nanotubes.     

Conical surface structures on model thin-film electrodes and tape-cast electrode materials for lithium-ion batteries

A computationally-effective approach for calculating the electromechanical behavior of SWNTs and MWNTs of the dimensions used in nano-electronic devices has been developed. It is a mixed finite element–tight-binding code carefully designed to realize significant time saving in calculating deformation-induced changes in electrical transport properties of the nanotubes. The effect of the MWNT diameter and chirality on the conductance after mechanical deformation was investigated. In case of torsional deformation, results revealed the conductance of MWNTs to depend strongly on the diameter, since bigger MWNTs reach the buckling load under torsion much earlier, their electrical conductivity changes more easily than in small diameter ones. For the same outer diameter, zigzag MWNTs are more sensitive to twisting than armchair MWNTs since the hexagonal cells are oriented in such a way that they oppose less resistance to the buckling deformations due to torsion. Thus small diameter armchair MWNTs should work better if used as conductors, while big diameter zigzag MWNTs are more suitable for building sensors.     

Torsional buckling behavior of boron-nitride nanotubes using molecular dynamics simulations

Based on molecular dynamics simulations, the mechanical properties and buckling behavior of boron-nitride nanotubes under the action of torsional load are investigated. According to the results, the torsional properties of a boron-nitride nanotube are higher than those of its carbon counterpart. The effect of geometrical parameters on these parameters is also investigated. It is observed that by increasing the radius of nanotubes of the same length, unlike the critical shear strain, the critical torque considerably increases. The effect of chirality is also found to be negligible in the cases of critical shear strain and buckling mode, unlike the critical torque.     

轴压和扭转复合载荷作用下氮化硼纳米管屈曲行为的分子动力学模拟

采用分子动力学方法模拟了氮化硼纳米管在轴压和扭转复合荷载作用下的屈曲和后屈曲行为.在各加载比例下,给出了初始线性变形阶段和后屈曲阶段原子间相互作用力的变化,确定了屈曲临界荷载关系.通过对屈曲模态的细致研究,从微观变形机理上分析了纳米管对不同外荷载力学响应的差异.研究结果表明,扶手型和锯齿型纳米管均呈现出非线性的屈曲临界荷载关系,复合加载下的屈曲行为具有强烈的尺寸依赖性.温度升高将导致屈曲临界荷载的下降,且温度的影响随加载比例的变化而变化.无论在简单加载或复合加载中,同尺寸的碳纳米管均比氮化硼纳米管具有更强地抵抗屈曲荷载的能力.     

Combined torsional buckling of double-walled carbon nanotubes with axial load in the multi-field coupled condition

The present study has theoretically investigated the combined torsional buckling of double-walled carbon nanotubes (DWCNTs) with axial load in the multi-field coupled condition. The effects of torsion, axial load, thermal-electrical change, surrounding elastic medium and the Van der Waals forces are all taken into consideration. The governing equation of buckling for CNTs subjected to thermo-electro-mechanical loadings has been established based on an elastic shell model of continuum mechanics. Reasonable s...     

热力耦合作用下双层碳纳米管的扭转屈曲

考虑碳纳米管周边弹性介质和层间范德瓦耳斯力的作用,利用连续介质力学的壳体理论,建立了热力耦合作用下碳纳米管屈曲问题的控制方程,给出了相应的临界屈曲扭矩的解析解.数值模拟结果表明,在低温和室温环境下,碳纳米管的临界屈曲载荷随着温度变化量的增加而提高;在高温环境下,碳纳米管的临界屈曲载荷随着温度变化量的增加而降低. 关键词： 碳纳米管 屈曲 热力耦合     

Transitional failure of hybrid carbon nanotubes under multiaxial loads

Transitional failure envelopes of hybrid single-walled carbon nanotubes functionalized by functional groups and filled with butane molecules under combined tension–torsion are predicted using classical molecular dynamics simulations. The observations reveal that while the tensile failure load decreases with combined torsion, the torsional buckling moment increases with combined tension. As a result, the failure envelopes under combined tension–torsion are definitely different from those under pure tension or torsion. In such combined loading, there is a multitude of failure modes (tensile failure and torsional buckling), and the failure therefore exhibits the feature of transitional failure envelopes. In addition, the functionalization by functional groups decreases both tensile failure load and torsional buckling moment, while filling with butane molecules increases only the torsional buckling moment. Consequently, the transitional failure envelopes of functionalized and filled nanotubes are absolutely different relative to what is predicted for pristine nanotubes.     

Enhancing mechanical properties of multiwall carbon nanotubes via sp3 interwall bridging

Molecular dynamics (MD) simulations under transverse shear, uniaxial compression, and pullout loading configurations are reported for multiwall carbon nanotubes (MWCNTs) with different fraction of interwall sp3 bonds. The interwall shear coupling in MWCNTs is shown to have a strong influence on load transfer and compressive load carrying capacity. A new continuum shear-coupled-shell model is developed to predict MWCNT buckling, which agrees very well with all MD results. This work demonstrates that MWCNTs can be engineered through control of interwall sp3 coupling to increase load transfer, buckling strength, and energy dissipation by nanotube pullout, all necessary features for good performance of nanocomposites.     

浓硝酸处理前后多壁碳纳米管的荧光特性研究

对浓硝酸处理前后多壁碳纳米管的荧光特性进行了研究,结果发现多壁碳纳米管在浓硝酸处理前后都能产生荧光;与浓硝酸处理前相比,浓硝酸处理后的多壁碳纳米管的荧光有所增强,且荧光谱峰向短波长方向发生蓝移。碳纳米管产生的荧光与碳纳米管在其缺陷处捕获激发光的能量以及最低空轨道和最高占有轨道之间的能隙有关。多壁碳纳米管在浓硝酸处理前后都有缺陷,因而都能在其缺陷处捕获激发光能量而产生荧光;浓硝酸处理引起多壁碳纳米管的缺陷增多、捕获激发光能量增加因而荧光也随之增强。碳纳米管的最低空轨道和最高占有轨道之间的能隙随其长度减小而增大,浓硝酸处理引起多壁碳纳米管被削短导致其最低空轨道和最高占有轨道之间的能隙增大,因而引起多壁碳纳米管的荧光谱峰向短波方向蓝移。     

Prediction of compressive post-buckling behavior of single-walled carbon nanotubes in thermal environments

In the present investigation, the axial buckling and post-buckling configurations of single-walled carbon nanotubes (SWCNTs) are studied including the thermal environment effect. For this purpose, Eringen’s nonlocal elasticity continuum theory is implemented into the classical Euler–Bernoulli beam theory to represent the SWCNTs as a nonlocal elastic beam model. A closed-form analytical solution is carried out to analyze the static response of SWCNTs in their post-buckling state in which the axial buckling load is assumed to be beyond the critical axial buckling load. Common sets of boundary conditions, named simply supported–simply supported (SS–SS), clamped–clamped (C–C), and clamped–simply supported (C–SS), are considered in the investigation. Selected numerical results are given to represent the variation of the carbon nanotube’s mid-span deflection with the applied axial load corresponding to various nonlocal parameters, length-to-diameter aspect ratios, temperature changes, and end supports. Moreover, a comparison between the post-buckling behaviors of SWCNTs at low- and high-temperature environments is presented. It is found that the size effect leads to a decrease of the axial buckling load especially for SWCNTs with C–C boundary conditions. Also, it is revealed that the value of the temperature change plays different roles in the post-buckling response of SWCNTs at low- and high-temperature environments.     

Functional and unmodified MWNTs for delivery of the water-insoluble drug Carvedilol - A drug-loading mechanism

The purpose of this study was to develop carboxyl multi-wall carbon nanotubes (MWNTs) and unmodified MWNTs loaded with a poorly water-soluble drug, intended to improve the drug loading capacity, dissolubility and study the drug-loading mechanism. MWNTs were modified with a carboxyl group through the acid treatment. MWNTs as well as the resulting functionalized MWNTs were investigated as scaffold for loading the model drug, Carvedilol (CAR), using three different methods (the fusion method, the incipient wetness impregnation method, and the solvent method). The effects of different pore size, specific surface area and physical state were systematically studied using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transformation infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), nitrogen adsorption, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The functional MWNTs allowed a higher drug loading than the unmodified preparations. The methods used to load the drug had a marked effect on the drug-loading, dissolution, and physical state of the drug as well as its distribution. In addition, the solubility of the drug was increased when carried by both MWNTs and functional MWNTs, and this might help to improve the bioavailability.     

Radial buckling of multi-walled carbon nanotubes under hydrostatic pressure

Radial buckling stresses of carbon nanotubes (CNTs) need to be studied in high-pressure resonance Raman scattering spectrum. In this work, the closed-form expression of the critical buckling stress of multi-walled carbon nanotubes (MWCNTs) under hydrostatic pressure is derived that can be conveniently employed. Using the derived formulae, the critical buckling stresses of single-walled carbon nanotubes and double-walled carbon nanotubes with different diameters are calculated. The results are in good agreement with other reported literatures. In addition, the critical buckling stresses of each layer of a quintuple-walled CNT in different buckling modes are predicted, showing that the buckling instability can occur not only in the outermost rolled layer, but also in other rolled layer of MWCNTs by considering different diameters and buckling modes.     

Superconductivity in entirely end-bonded multiwalled carbon nanotubes

We report that entirely end-bonded multiwalled carbon nanotubes (MWNTs) can exhibit superconductivity with a transition temperature (T(c)) as high as 12 K, which is approximately 30 times greater than T(c) reported for ropes of single-walled nanotubes. We find that the emergence of this superconductivity is highly sensitive to the junction structures of the Au electrode/MWNTs. This reveals that only MWNTs with optimal numbers of electrically activated shells, which are realized by end bonding, can allow superconductivity due to intershell effects.     

Preparation and characterization of biocompatible magnetic carbon nanotubes

Magnetic carbon nanotubes consisting of multi-wall carbon nanotubes (MWNTs) core and Fe₃O₄ shell were successfully prepared by in situ thermal decomposition of Fe(acac)₃ or FeCl₃ or Fe(CO)₅ in 2-pyrrolidone containing acid treated MWNTs at 240 °C with the protection of nitrogen gas. The samples were characterized by TEM, XRD, SEAD, XPS and superconducting quantum interference device. Also, their biocompatibility was compared with naked carbon nanotubes. The results showed that after coated with Fe₃O₄ nanoparticles, the obtained magnetic carbon nanotubes show superparamagnetic characteristic at room temperature, and their blocking temperature is about 80 K. The magnetic properties of the nanotubes are relevant to the content of magnetic particles, increasing content of magnetic nanoparticles leads to higher blocking temperature and saturation magnetization. The results of antimicrobial activities to bacterial cells (Escherichia coli) showed that the MWNTs have antimicrobial activity, while the magnetic nanotubes are biocompatible even with a higher concentration than that of MWNTs.     

Enhanced mechanical properties and morphological characterizations of poly(vinyl alcohol)-carbon nanotube composite films

Tensile tests were carried out on free-standing composite films of poly(vinyl alcohol) (PVA) and multiwall carbon nanotubes (MWNTs) for different loading levels. Results show that overall mechanical properties of the composite were greatly improved as compared to the neat PVA film. For PVA-based materials at significant high loading level such as 9.1 wt.% MWNTs, considerable increases in Young's modulus, tensile strength and toughness by factors of 4.5, 2.7 and 4.1, respectively, were achieved. Raman, SEM, TEM, and DSC techniques were used to evaluate the PVA/MWNTs composite system. Strong acid-modification of the pristine MWNTs and the subsequent ultrasonication processing allowed good distribution of the nanotubes in the matrix. SEM together with DSC result shows apparent good wetting of the nanotubes by the PVA matrix, which are supportive of good interfacial bonding between the modified carbon nanotubes and the hosting polymer matrix.     

磁场辅助热处理金属化碳纳米管场发射性能

利用化学镀方法对多壁碳纳米管(multi-walled carbon nanotubes,MWNTs)表面金属化镀镍(MWNTs/Ni),采用丝网印刷制备MWNTs/Ni场发射阴极,并在磁场辅助下热处理所得阴极,研究磁场辅助热处理对MWNTs/Ni阴极的场发射性能的影响,经300mT磁场辅助热处理的MWNTs/Ni的场发射阴极开启场强约为0.80V·μm~(-1),场增强因子β约为16068,对单根MWNTs/Ni在磁场中的受力情况进行建模分析,实验结果表明:磁场辅助热处理有助于提高MWNTs/Ni在阴极表面的直立分布,提高了MWNTs/Ni的场发射性能。     

多壁碳纳米管膜湿敏特性的研究

研究了多壁碳纳米管(MWNTs)薄膜的湿敏特性，实验所用的多壁碳纳米管是用热灯丝化学气相沉积法(CVD)合成的.分别对未修饰和修饰的多壁碳纳米管膜温度和湿度特性进行研究后发现，修饰的多壁碳纳米管对温度和湿度非常敏感，且对湿度的响应时间和恢复时间短，重复性好.而未修饰的多壁碳纳米管对温度和湿度不太敏感.对修饰多壁碳纳米管的湿敏特性进行了理论分析，给出了其理论表示式. 关键词： 多壁碳纳米管 化学修饰 湿敏特性 物理吸附