Mechanical characterization of melt-textured Y0.95Er0.05Ba2Cu3O7−δ superconductor prepared in air

The effect of Er substitution on the mechanical properties of ab- and a(b)c-planes of melt-textured YBa₂Cu₃O_7?δ is reported in the present work. The non-oxygenated samples were characterized by scanning electron microscopy, X-ray diffraction and mechanical properties by instrumented indentation and conventional Vickers indentation whereas the superconducting properties were determined by resistivity measurements on oxygenated samples. The X-ray pattern and EDS analysis revealed the presence of Y-123, Y-211 and BaCeO₃ phases. Er substitution up to 5 wt.% did not affect the superconducting properties. No difference in hardness was observed for the ab- and a(b)c-planes. Elastic modulus of the a(b)c-plane was 10% higher than of the ab-plane. Differences in indentation fracture toughness obtained by conventional Vickers indentation of the ab- and a(b)c-planes was observed. The addition of 5 wt.% of Er did not affect significantly the mechanical properties of melt-textured samples when compared with pure melt-textured YBa₂Cu₃O_7?δ.     

X-ray absorption spectroscopy of the 90K superconductor YBa2Cu3O7−δ

X-ray absorption spectroscopy has been used to probe the Cu environment of the new highT _c YBa₂Cu₃O_7– superconductor. Evidences of other valencies than two are found for copper. Besides Cu¹⁺ which is localized on Cu₁ sites when the unit cell is oxygendeficient, one invokes a ground state which merges bivalent 3d ⁹ to 3d ⁹ L configurations as proposed in a recent paper (L stands for a ligand hole in the CuO bond) very similar to that observed in many light rare earth oxides.     

Superlattice structures in solid solution of high-Tc YBa2Cu3O7−δ and (Pb,Cu)Sr2(Ca,Y)Cu2O7−δ superconductors

A complete solid solution range exists between the systems YBa₂Cu₃O_7−δ and (Pb,Cu)Sr₂(Ca,Y)Cu₂O_7−δ has been found with general stoichiometry (Pb_0.75xCu_1−0.75x)(Sr_2xBa_2−2x)(Ca_0.5xY_1−0.5x)Cu₂O_7−δ. Energy dispersive spectrometry and X-ray diffraction identified that a true solid solution exists. Superlattice structures observed by electron diffraction across the solid solution range have a modulation range have a modulation periods along a* which can be varied by altering both the compositional parameter x and the overall oxygen content. The existence of these superlattices infers that the solid solution is non-random and therefore thermodynamically non-ideal. The superconducting transition temperatures, T_c, across the solid solution range are also strongly dependent on the composition, x, but no direct relationship with the modulation period has been established. From these studies it may be concluded that the solid solution between known superconductors is possible, although involving some partial ordering of the lattice, but ordering of cations in the rock-salt to charge reservoir layer is not a significant factor in determining the superconducting properities, which depend more closely on the overall composition and hence on the ability of the charge reservoir layer to transfer charge to the superconducting layers.     

Observation of RF superconductivity in Y1Ba2Cu3O9−δ AT 3 GHz

Two samples of Y₁Ba₂Cu₃O_9−δ, one fabricated at Los Alamos National Laboratory and the other at the University of Wuppertal, were tested in the rf field of a niobium cavity at 3 GHz and in a temperature range from 4.2 to 300 K. The data show a sharp reduction of the Joule losses in the samples beginning at an onset temperature of 98 and 92 K, respectively. The residual losses of the sample were measured at 4.2 K where the host cavity was superconducting. The ratio of these losses to the ones observed slightly above T_c was less than 1.1 × 10⁻². This indicates that only a small fraction of the conduction electrons of the Y₁Ba₂Cu₃O_9-δ sample remain unpaired. The dependence of the rf losses on the rf magnetic field allows the determination of a maximum surface current density which is found to be about 5 × 10⁴ A/cm².     

Magnetoresistance hysteresis of granular YBa2Cu3O7−δ high-temperature superconductor in weak magnetic fields

The variation of the transverse magnetoresistance of YBa₂Cu₃O_～6.95 high-temperature superconducting ceramic with external magnetic field intensity H _ext first increasing from zero to ～500 Oe (Δρ⁺ / ρ_{273 K}) and then decreasing from about 500 Oe to zero (Δρ^? / ρ_{273 K}) is studied for transport current densities varying from j/j _c ≈ 0.01 to ≈0.99 (where j _c is the critical current density in the absence of the magnetic field) at 77.3 K. It is found that the field dependence of the magnetoresistance of YBa₂Cu₃O_～6.95 high-temperature superconductor is characterized by pronounced hysteresis, the difference Δρ⁺ / ρ_{273 K} ? Δρ^? / ρ_{273 K} increasing with j/j _c. As j/j _c grows, the effective critical fields of Josephson weak links, H _c2J , and the lower critical fields of superconducting grains, H _c1A , decline. When field H _ext rises, the critical fields are lower than when H _ext diminishes: H _c2J ⁺ < H _c2J ^? and H _c1A ⁺ < H _c1A ^? .     

The hole concentration on oxygen sites in the highT c superconductor Y1−Ba2−Cu3−O7−x

From XPS core level spectroscopy the average copper charge on the Cu sites in the high temperature superconductor Y₁Ba₂Cu₃O_7–x is determined as function of the oxygen vacancy concentrationx. Analysis of these data leads to the suggestion that there are holes on the oxygen sites in the basal plane of the crystal structure. The probability for holes on these oxygen ions is rather constant for 0x0.3 with a value of 0.64 and decreases to zero forx=0.5. The dependence of the superconducting transition temperature on the hole concentration is discussed. An energy level diagram for Cu²⁺ and Cu³⁺ in YBa₂Cu₃O_7–x is constructed.     

Superconductivity above 100 K in multi-phase Y−Ba−Cu−O

We report the synthesis, characterization and superconducting temperature of high-temperature superconducting Y_0.3Ba_0.7CuO₃, Y_0.4Ba_0.6CuO₃ and Y_1.2Ba_0.8CuO₄. The volume fraction of the superconducting phase is estimated to be of the order of 10%.HighT _c superconductivity withT _c -onsets up to 125 K (midpoint 102 K, zero resistance: 90 K) is observed in multi-phase Y–Ba–Cu–O oxygen defect compounds with the nominal composition of Y_1.2Ba_0.8CuO_4–y (0y0.4).     

Critical temperature and orthorhombicity of Y2Ba4Cu7O15−δ

Superconducting properties have been systematically studied for oxygen content controlled Y₂Ba₄O₇O_15?δ (Y247) polycrystalline bulks sintered under various conditions, 940–975 °C and P(O₂) = 4–16 atm. T_c of oxygen annealed Y247 samples at 400 °C varied largely depending on the sintering conditions from ～60 to ～90 K. Samples sintered under higher P(O₂) exhibited lower T_c, whereas they were confirmed to be of Y247 single phase by powder X-ray analyses. Strong relationship between orthorhombicity defined as 1000(b ? a)/(a + b) and T_c was found in Y247 as in the cases of REBa₂Cu₃O_7?δ with light rare-earth elements, such as La, Nd, Sm, Eu and Gd. In addition, T_c‘s of samples with nominal compositions of Y_2+xBa_4?xO₇O_15?δ systematically decreased with an increase of x. These results indicated that partial substitution of Y for Ba occurred in the Y247 compounds possibly due to high occupancy ratio of oxygen at the Cu–O_1-δ chain during the sintering process.     

Preparation and properties of Y1−xHoxBa2Cu3O7−δ thin films by TFA-MOD method

Y_1?xHo_xBa₂Cu₃O_7?δ (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) thin films were prepared on LaAlO₃ (0 0 1) substrates by trifluoroacetate metal organic deposition (TFA-MOD) without change of the processing parameters. The highest J_c was attributed to the sample of Y_0.6Ho_0.4Ba₂Cu₃O_7?δ thin film, whose critical current density is about 1.6 times as compared to that of YBa₂Cu₃O_7?δ thin film at 77 K and self field. The flux pinning type was not varied with Ho substitution and can be attributed to δl pinning model, which is attributed to the close ionic radius between the Y³⁺ and Ho³⁺ ions. The improvement of J_c by Ho substitution without change of the processing parameters will provide an effective route to enhance the J_c of YBCO-based thin films using TFA-MOD method.     

Crystalline-electric field interactions in DyBa2Cu3O7−δ and TmBa2Cu3O7−δ from161Dy- and169Tm-Mössbauer spectroscopy

¹⁶¹Dy- and¹⁶⁹Tm-Mössbauer spectroscopy is employed to measure the temperature dependence of the electric quadrupole interaction at the rare earth nucleus in orthorhombic and tetragonal phases of DyBa₂Cu₃O_7?δ and TmBa₂Cu₃O_7?δ. Analyses of the quadrupole splittings in terms of the crystalline-electric field parametersB _n ^m are compared with available data from inelastic neutron scattering and¹⁵⁵Gd-Mössbauer measurements.     

Structural relaxation,metal-to-insulator transition and pseudo-gap in oxygen deficient НоBa2Cu3O7−δ single crystals

The effect of annealing at room temperatures on the conductivity in the basis plane of oxygen deficient HoВа₂Сu₃О_7?δ single crystals, tempered from a temperature of 650 °C is investigated. We determine that during the annealing process an extension of the area of the linear dependence of the resistivity ρ_ab(T) occurs. A shift downwards of the temperature interval corresponding to the metal-to-insulator transition and a considerable transformation of the form of the resistivity transfers to the superconducting state was observed. The absolute value of the temperature that the pseudo-gap regime commences is reduced by about 20 K. The results are attributed to labile oxygen ordering without changing the concentration of oxygen in the sample. The estimation of the cluster sizes is characterized by the differences in oxygen content. We perform a comparative analysis between the experimental data with the predictions of the high temperature superconductivity cluster theory.     

Dynamics of atoms in the high-temperature superconductor YBa2Cu3O7−δ

In order to obtain insight into the role played by the phonons in the superconducting phase transition, we have performed infrared reflectivity and inelastic neutron scattering experiments on single phase YBa₂Cu₃O_7–(0.1,T _c =94 K, T _10–90=1 K). These experimental results, together with published Raman scattering and specific heat data are used to determine the parameters of a rigid-ion model; the model is able to reproduce qualitatively the experimental data. On the basis of our model we derive and discuss the phonon density of states and the pattern of atomic displacements of some important vibrational modes. In particular, the model reveals the existence of high-frequency oxygen breathing modes and of low-frequency copper dimerization modes in both the CuO₃-chains and the CuO₂-planes. Furthermore, Jahn-Teller like oxygen modes exist in the chains. The possible role of these modes with respect to the pairing mechanism is discussed. In addition there exist low-frequency chain-degrading modes which favour jumps of oxygen atoms out of the CuO₃-chains into neighbouring vacant sites in the basal plane.     

Seebeck-effect in the mixed state of Y−Ba−Cu−O

We report on measurements of the Seebeck-effect, the Nernst-effect, and the magnetoresistance in the mixed state of ac-axis oriented expitaxial film of Y–Ba–Cu–O. In contrast to conventional superconductors we find a large Seebeck-coefficientS, which is comparable in magnitude to the Nernst-effect. The broadening of the super-conducting transitions of magnetoresistance and Seebeck-effect are rather similar with respect to (1) the temperature dependence, (2) the dependence on the direction between magnetic field and crystal axis and (3) the dependence on the direction between magnetic field and driving forces. The large Seebeck-effect has to be attributed to dissipation due to normal quasiparticle-excitations, since the vortex-contribution to the Seebeck-effect is by far too small to account for the observed magnitude ofS. It is argued that such a quasiparticle contribution to the dissipation is large in the high-T _c superconductors because of the small coherence lengths and thus the small vortex cores. Another possibility is that granularity leads to dissipation proportional to the normal state transport properties. The Seebeck-voltage depends on all dissipative processes other than vortex motion, whereas the Nernst-effect depends only on the vortex motion. Therefore by measurements of thermomagnetic effects the various dissipative properties may be separated.     

Enhanced JC in air-processed GdBa2Cu3O7−δ superconductor bulk grown by the additions of nano-particles

Single domain superconductor GdBa₂Cu₃O_7?δ bulks with variable additions of (ZnO + ZrO₂ + SnO₂) nano-particles was prepared in air by using top seed melt-textured growth process. The effect of nano-particle additions on superconductivity properties has been investigated. An enhancement of the critical current J_C in low and intermediate field at 77 K and trapped field was discovered by the additions of the nano-particles. At the same time, the superconductor transition temperature, T_C, slightly decreases from 93.5 K to 91.5 K. The experimental results show that the accumulation of the nano-particle inclusions may improve J_C of the specimens.     

Doping effect of Ag nanoparticles on critical current of YBa2Cu3O7−δ bulk superconductor

The objective of this work is to investigate the effect of Ag nanoparticles on critical current of YBa₂Cu₃O_7?δ (YBCO) superconductor. Ag nanoparticles with different particle sizes from 30 to 1000 nm were prepared through the chemical reduction of AgNO₃ in an alcohol solution. Then, samples of YBCO superconductors were doped by 1 and 2 wt.% of Ag nanoparticles with different sizes. Samples were characterized with XRD, SEM and EDX measurements. Critical current measurements were performed using a standard four-probe technique at liquid nitrogen temperature. The results showed by increasing of Ag nanoparticles up to 700 nm the J_c increases, but decreases by further increase in Ag particles size. The critical current enhancement is attributed to the improved connectivity between the grain boundaries and better crystallization of the grains.     

Magnetotransport study of in situ magnetic field textured Dy1Ba2Cu3O7−δ superconductors

The electrical resistivity, thermoelectric power and the Nernst effect have been studied as a function of temperature and magnetic field for a typical superconductor DyBa₂Cu₃O_7– magnetically textured in situ at 1035°C. The three transport coefficients show hybrid microscopic features. In particular, we show the anisotropy with respect to the field direction (H//a,H//c) in all transport coefficients. We verify that Tinkham's law is obeyed for the broadening of the resistive transition in a magnetic field. Similarly we obtainanisotropic broadening exponents for each integrated excess property. From Arrhenius plots we obtain orders of magnitude for the activation energies characterizing each property. They are markedly different from each other.     

Rapid change of electronic anisotropy in overdoped (Y,Ca)Ba2Cu3O7−δ

Electronic anisotropy was studied for overdoped (Y, Ca)Ba₂Cu₃O_7−δ with various doping levels (p). It was found that the pseudogap-like behavior in the resistivity disappear when p exceeds 0.17, independent of the oxygen deficiency. The anisotropy ratio γ estimated from upper critical fields showed a rapid decrease at around p = 0.18, approaching γ = 3 for p > 0.20.     

Growth of Cu0.5Tl0.5Ba2Ca3Cu4−yZnyO12−δ superconductor with optimum carriers

We have tried to vary the carriers concentration in Cu_0.5Tl_0.5Ba₂Ca₃Cu_4?yZn_yO_12?δ (y = 0, 1, 1.5, 2, 2.5) superconductor with the help of post-annealing experiments carried out in nitrogen, oxygen and air and to investigate its effects on the superconductivity parameters. The zero resistivity critical temperature [T_c(R = 0)], the magnitude of diamagnetism and critical current [I_c(H = 0)] are found to increase in Zn free samples after post-annealing in oxygen and air, while these superconducting properties have been suppressed after post-annealing in nitrogen at 550 °C for 6 h. The post-annealing of Zn-doped samples in air has marginally increased the superconducting properties, while these properties have been suppressed after post-annealing in nitrogen and oxygen. These studies have led us to the definite conclusion that the Zn-doped material has grown with optimum carriers concentration.