The Synthesis and Investigation of Liquid-Liquid Extraction Capability of N-Diphenylphosphino-N-ethylaniline and Its Chalcogenide Derivatives

The aminophosphine ligand was synthesized by the reaction of N-ethylaniline with chlorodiphenylphosphine in the presence of triethylamine at low temperature. Oxidation of the ligand with elemental sulfur or selenium afforded the corresponding aminophosphine sulfide and selenide. The compounds were characterized by elemental analyses, IR, ¹H and ³¹P NMR. N-diphenylphosphino-N-ethylaniline and its chalcogen derivatives were used as ligands in solvent extraction of metal picrates such as Cd²⁺ and Ni²⁺ from the aqueous to the organic phase. Influences of parameters such as pH of the aqueous phase, solvent, extraction time, and extradant concentration were investigated to determine the extraction ability of ligands for metal ions. Results of the experiments showed that an extractability of 95.5 and 97.8%, respectively for Ni²⁺, and Cd²⁺ at pH 2 could be achieved.

     

Incompletely condensed fluoroalkyl silsesquioxanes and derivatives: precursors for low surface energy materials

A novel synthetic method was developed for the controlled functionalization of fluorinated polyhedral oligomeric silsesquioxanes (F-POSS), which are useful as low surface energy materials for superhydrophobic and superoleophobic materials. Utilizing triflic acid, open-cage compounds were created and then reacted with a variety of dichlorosilanes to produce functional F-POSS structures possessing alkyl-, aryl-, and acrylate-based moieties. The crystal structure for an endo,endo-disilanol F-POSS compound was determined by single-crystal X-ray diffraction. The chemical structures were confirmed using multinuclear NMR spectroscopy ((1)H, (13)C, (19)F, and (29)Si), FT-IR, and combustion analysis. Dynamic contact angle measurements of these compounds were taken with water and hexadecane. These novel structures were found to possess excellent wetting-resistant behavior, similar to that of the parent F-POSS compound. They are the first well-defined fluorinated nano-building blocks with a controlled level of reactive functionality for the development of new superhydrophobic and superoleophobic materials.     

Highly fluorinated low‐molecular‐weight photoresists for optical waveguides

A series of highly fluorinated polymers were synthesized by copolymerization of 2,3,4,5,6‐pentafluorostyrene (PFS) and fluorinated styrene derivate monomer (FSDM). Their chemical structure were confirmed by ¹H NMR, ¹³C NMR, and ¹⁹F NMR spectra. The refractive index and cross‐linking density of the polymers can be tuned and controlled by monitoring the feed ratio of comonomers. A series of negative‐type low‐molecular‐weight fluorinated photoresists (NFPs) were prepared by composing of fluorinated polystyrene derivates (FPSDs), diphenyl iodonium salt as a photoacid generator (PAG) and solvent. The polymer films prepared from NFP by photocuring exhibited excellent chemical resistance and thermal stabilities (T_d ranged from 230.5 to 258.1 °C). A clear negative pattern was obtained through direct UV exposure and chemical development. For waveguides without upper cladding, the propagation loss of the channel waveguides was measured to be 0.25 dB/cm at 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis, characterization and properties of a novel fluorinated polyurethane

A novel fluorinated polyurethane (FPU) was prepared by fluorinated polyether glycol (PTMG-g-HFP) as a soft segment, 1,6-hexamethylene diisocyanate (HDI) or toluene diisocyanate (TDI) as a hard segment and 1,4-butanodiol (BDO) as a chain extender. Fourier transform infrared spectroscopy (FTIR), ¹H NMR, ¹³C NMR and gel permeation chromatography (GPC) were used to characterize the structure of the fluorinated polyurethane. The thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by thermogravimetric analysis (TGA). X-ray photoelectron spectroscopy (XPS) analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. And the mechanical properties of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were also measured. Chemical resistance of polyurethane films was estimated through spot tests with different solvents. The results showed that FPU had high thermal stability, strain-hardening property and good chemical resistance. The XPS measurements showed the fluorine enrichment on the surface of FPU.     

Double Schiff bases derivatives of chitosan by selective C-6 and C-2 oxidation mediated by 5-fluorosalicylaldehyde aniline by TG-GC-MS and TG-FTIR analysis

Abstract

This enhancement in the activity may be efficient on the basis that ligands mainly possess CH=N bond. The use of a structure-based drug design approach (SBDD) provides a way for investigation as well as to understand the molecular basis of the target protein and ligand molecule interactions at the atomic level. Structure-based drug design is the design and optimization of a chemical structure to identify a compound suitable for clinical testing the drug candidates. Chitosan is a polysaccharide with recognized biological activities for improving the functionality of polysaccharide 5-Fluorosalicylaldehyde aniline system. The used for selectively oxidized chitosan to produce tailored derivatives. C-2-5-Fluorosalicylaldehyde-C-6 aniline double Schiff base derivatives of chitosan were synthesized. The structure and properties of the newly synthesized product were characterized by FT-IR, ¹H-NMR, ¹³C-NMR, GC-Mass spectroscopy, and thermal analysis (DSC/TGA). An exothermic process discusses a DSC and TGA analysis of thermal behavior of this polymer was shown to be a possible thermal polymerization of the double bonds in the polymer chains and thermo-oxidation of the polymer.     

Preparation and Surface Properties of Fluorine‐Containing Diblock Copolymers PLMA‐Block‐PFAEA

A series of fluorine‐containing diblock copolymers based on lauryl methacrylate and 1H,1H,2H,2H‐perfluoroalkyl acrylate have been prepared by atom transfer radical polymerization (ATRP). The preparation process of PLMA‐Br macroinitiators was controlled within a reasonable time corresponding to the ln [M₀]/[M_t]～time plot of the reaction. FTIR, ¹H‐NMR, GPC and fluorine‐element analysis (FEA) were used to characterize the synthesized block copolymers. The solid surface activity of these polymers was demonstrated by contact angle measurement. The polymer films prepared by block copolymers with more than three fluorinated units showed low dispersion force contributions to the surface energy indicating the presence of the fluorinated block at the surface. The surface activity in solutions was measured by drop‐weight method. Ii is interesting to find, when the fluorine weight percentage is controlled constant, that PLMA‐b‐PFAEA with larger molecular size is more prominent in exploiting the fluorinated structure to reduce the surface tension of solutions. The block copolymer's ability in reducing surface tension of solutions also depends on the type of solvent.     

Synthesis of polysiloxane xerogels with fluorine-containing groups in the surface layer and their sorption properties

Hydrolysis and polycondensation reactions of tetraethoxysilane (TEOS) with 3,3,3-trifluoropropyl-trimethoxysilane (TFMS) or 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFES) were used to synthesize xerogels functionalized with fluorine-containing groups. According to transmission electron microscopy, the skeletons of synthesized polysiloxane xerogels have globular structures and consist of agglomerates of particles with fluorinated groups on their surfaces. FTIR spectroscopy showed that primary xerogel particles possess spatial polysiloxane networks, with fluorinated groups along with silanol groups and water in the surface layer. According to thermal analyses, the water content was 3–8 wt.%, and it decreased with increasing length of the fluorinated chain. Thermal destruction of the surface layer starts above 300 °C. The sorbents that were obtained were predominantly mesoporous materials with well-developed porous structures (S_BET = 400–960 m² g⁻¹, V_s = 0.66–0.93 cm³ g⁻¹). The influence of the TEOS/functional silane ratio and the natures of the functional groups on the structural and adsorptive properties were shown. The samples synthesized are organophilic. The affinity for n-hexane increases with increasing length of the fluorine-containing chain (PFES) and the content of fluorinated groups in the surface layer. The hybrid organic–inorganic materials that were obtained can be used for adsorption of hydrocarbons, including oil, from water.     

Atom transfer radical polymerization of MMA with a macromolecular ligand in a fluorinated solvent and in supercritical carbon dioxide

Macromolecular fluorinated ligands were prepared according to a three-step strategy that consists of the random copolymerization of heptadecafluorodecyl acrylate and 2-hydroxyethylacrylate, followed by the esterification of the pendant hydroxyl groups with acryloyl chloride and the Michael-type addition of tetraethyldiethylenetriamine onto the acrylic double bonds of the polymeric chains. These fluorinated macroligands were successfully used in the atom transfer radical polymerization of MMA catalyzed by a copper salt in a fluorinated solvent. The polymerization control was analyzed in relation to the copper salt, the initiator and the molecular weight and composition of the macroligand before being extended to the heterogeneous ATRP of MMA in scCO₂.     

Synthesis and vibrational spectroscopy of halotrichite and bilinite

The new uranyl complexes with tetradentate unsymmetrical N₂O₂ Schiff base ligands were synthesized and characterized by IR, UV–vis, NMR and elemental analysis. The DMF solvent is coordinated to uranyl complexes. The thermogravimetry (TG) and differential thermoanalysis (DTA) of the uranyl complexes were carried out in the range of 20–700 °C. The UO₂L¹ complex was decomposed in two and the others were decomposed in three stages. Up to 100 °C, the coordinated solvent was released then the Schiff base ligands were decomposed in one or two steps. Decomposition of synthesized complexes is related to the Schiff base characteristics. The thermal decomposition reaction is first order for the studied complexes.     

Highly Fluorinated and Crosslinkable Dendritic Polymer for Photonic Applications

Summary: A novel crosslinkable dendritic polymer has been synthesized by the thermal polymerization of peripheral aryl trifluorovinyl ether moieties of a highly fluorinated dendrimer. The resulting perfluorocyclobutane(PFCB)‐containing dendritic polymer exhibited excellent processability, low optical loss (0.36 dB · cm⁻¹ at 1 310 nm with 1% dye doping), high thermal stability, and good solvent resistance for waveguide‐based photonic applications.

Structure of the crosslinkable fluorinated dendrimer synthesized.     

THE EQUILIBRIA AND KINETICS OF THE COMPLEX FORMATION BETWEEN Fe(III) AND TARTARIC AND CITRIC ACIDS

Abstract

The equilibria and kinetics of formation of 1 : 1 iron(III) complexes with tartaric and citric acids have been studied in the pH range 1.0–2.0 in aqueous alcoholic perchlorate media. The equilibrium constants for the reactions Fe³⁺ +

H₄L^keq Complex + nH⁺ were obtained from spectrophotometric measurements in the wavelength range 360–420 nm. The values of K _eq determined at 20°, μ=1.0 M (water 100%), were 0.21 M with n=2 for tartaric and 0.0186 M² with n=3 for citric acid. The stoichiometry of the complex formation and the reaction sites of the ligands were discussed with reference to previous findings on ligands of related structures. The kinetics of the reactions were carried out by the stopped-flow technique. From the hydrogen ion dependence of the reaction rates it can be shown that complex formation occurs between FeOH²⁺ and differently protonated forms of the ligands. Forward rates for the different paths are consistent with an SN1 IP interaction in agreement with the Eigen mechanism; forward and reverse rate quotients enabled the evaluation of the equilibrium constants which agreed satisfactorily with the spectrophotometric ones. The effect of varying the solvent composition (water-alcohol) was discussed with reference to the reaction mechanism.     

Fluorinated pillared-layer metal-organic framework microrods for improved electrochemical cycling stability

Developing metal-organic framework (MOF)-based materials with good cyclic stability is the key to their practical application. Fluorinated organic compounds are usually highly chemically stability due to the high electronegativity of fluorine. Also, the pillared-layer structures based on coordination bonds have better structure and thermal stability than those based on hydrogen bonds. Herein, the fluorinated pillared-layer [Ni(2,3,4,5-tetrafluorobenzoic acid)(4,4′-bipyridine)]_n MOF ([Ni(TFBA)(Bpy)]_n) materials were constructed through a facile room-temperature solution reaction and used as electrode materials for supercapacitors. Surprisingly, the size/morphology of Ni(TFBA)(Bpy)]_n MOFs could be adjusted by varying the synthesis time. Benefting from the short ion diffusion length, unique pillar-layer structure, and strong intercomponent synergy of organic ligands, the Ni(TFBA)(Bpy)]_n MOF microrods showed a higher electrochemical energy storage capability than bulk MOFs. At the same time, compared to the non-fluorinated [Ni(benzoic acid)(Bpy)]_n MOFs (31.5% capacitance decay), the fluorinated Ni(TFBA)(Bpy)]_n MOFs have a higher cycle stability with only 2.6% capacitance loss after 5000 cycles at 3 mA/cm².     

Electrochemistry and Spin-Crossover Behavior of Fluorinated Terpyridine-Based Co(II) and Fe(II) Complexes

Due to their ability to form stable molecular complexes that have tailor-made properties, terpyridine ligands are of great interest in chemistry and material science. In this regard, we prepared two terpyridine ligands with two different fluorinated phenyl rings on the backbone. The corresponding Co^II and Fe^II complexes were synthesized and characterized by single-crystal X-ray structural analysis, electrochemistry and temperature-dependent SQUID magnetometry. Single crystal X-ray diffraction analyses at 100 K of these complexes revealed Co−N and Fe−N bond lengths that are typical of low spin Co^II and Fe^II centers. The metal centers are coordinated in an octahedral fashion and the fluorinated phenyl rings on the backbone are twisted out of the plane of the terpyridine unit. The complexes were investigated with cyclic voltammetry and UV/Vis-NIR spectroelectrochemistry. All complexes show a reversible oxidation and several reduction processes. Temperature dependent SQUID magnetometry revealed a gradual thermal SCO behavior in two of the complexes, while EPR spectroscopy provided further insights on the electronic structure of the metal complexes, as well as site of reduction.     

Synthesis and properties of fluorinated telechelic macromolecular diols prepared by radical grafting of fluorinated thiols onto hydroxyl-terminated polybutadienes

The radical grafting of C_nF_{2n +1} CH₂CH₂SH (n = 6,8) onto the double bonds of hydroxyl-terminated liquid polybutadienes (HTPBD) was studied. Various methods for investigating the amount of grafting (titration of residual thiol and fluorine analysis) were used and compared. The nature and the amount of the initiator, the quantity of thiol, the temperature and the time of the reaction. the solvent, and the microstructure of HTPBD were optimized. The kinetic aspect showed that the thiol disappeared according to a first-norder law. A method using up to 100% of grafting fluorinated mercaptan was described and standards were set up with fluorine contents of 5–59% to evaluate the physicochemical properties of these thioether group-containing polymers: solubility, refractive index, intrinsic and dynamic viscosities, and thermal characteristics (glass transition and decomposition temperatures). Finally, the surface properties of these standards showed improvements of surface energy as low as 9 mN m^?1 for a totally saturated fluorinated HTPBD. © 1993 John Wiley & Sons, Inc.     

Characterization of Interactions Between Taspine Derivate TPD7 and EGF Receptor by Cell Membrane Chromatography with Zonal Elution and Frontal Analysis

In this study, a high epidermal growth factor receptor (EGFR) expression cell membrane chromatography method was established to investigate the interactions between ligands and EGFR. The affinity of ligands for EGFR was evaluated by frontal analysis. Competition study using afatinib as the marker was used to evaluate the interactions that occurred at specific binding sites on EGFR. The results indicated that TPD7, HMQ1611 and afatinib may have direct competition at a single common binding site on EGFR. From the model of frontal analysis, the dissociation equilibrium constants (K _D) were 6.05 × 10⁻⁷ M for afatinib, 6.91 × 10⁻⁷ M for TPD7, and 9.68 × 10⁻⁷ M for HMQ1611. In cells, HMQ1611 and TPD7 could both inhibit the growth of HEK293/EGFR cells and significantly decrease EGFR phosphorylation in HEK293/EGFR cells in a dose-dependent manner. The studies showed that TPD7 and HMQ1611 could bind EGFR as afatinib. TPD7 exhibited higher inhibitory effect than HMQ1611 while TPD7 and HMQ1611 had a similar effect in HEK293/EGFR cells, thus indicating that TPD7 might be the novel blocker for cancer with high-EGFR expression.

     

Supramolecular Alloys from Fluorinated Hybrid Tri4Di6 Imine Cages

To create innovative materials, efficient control and engineering of pore sizes and their characteristics, crystallinity and stability is required. Eight hybrid Tri⁴Di⁶ imine cages with a tunable degree of fluorination and one fully fluorinated Tri⁴Di⁶ imine cage are investigated. Although the fluorinated and the non-fluorinated building blocks used herein differ vastly in reactivity, it was possible to gain control over the outcome of the self-assembly process, by carefully controlling the feed ratio. This represents the first hybrid material based on fluorinated/hydrogenated porous organic cages (POCs). These cages with unlimited miscibility in the solid state were obtained as highly crystalline samples after recrystallization and even showed retention of the crystal lattice, forming alloys. All mixtures and the fully fluorinated Tri⁴Di⁶ imine cage were analyzed by MALDI-MS, single-crystal XRD, powder XRD and in regard to thermal stability (TGA).     

Gels from a semifluorinated n-alkane in fluorinated solvents as a probe for intermolecular interactions

Diblock semifluorinated n-alkanes can form aggregates and gels in fluorinated solvents. We have investigated the thermal behavior of binary mixtures comprising F(CF₂)₈(CH₂)₁₆H and fluorinated solvents. The solvents were perfluorohexane, perfluoroheptane, perfluorooctane, perfluorooctyl bromide, perfluorodecalin, and perfluorotributylamine. The phase diagrams were used to calculate the activity coefficients of the two components and the main excess thermodynamic functions. The solubility and self-assembly behavior of F₈H₁₆ in the fluorinated solvents are related to the different solute–solvent dispersion interactions that depend on the polarizabilities and ionization potentials of the interacting species, and on the structural properties of the solvent.     

Rapid Determination of DDT and Its Metabolites in Environmental Water Samples with Mixed Ionic Liquids Dispersive Liquid–Liquid Microextraction Prior to HPLC-UV

In this paper, a novel mixed ionic liquids-dispersive liquid–liquid microextraction method was developed for rapid enrichment and determination of environmental pollutants in water samples. In this method, two kinds of ionic liquids, hydrophobic ionic liquid and hydrophilic ionic liquid, were used as extraction solvent and disperser solvent, respectively. DDT and its metabolites were used as model analytes and high-performance liquid chromatography with ultraviolet detector for the analysis. Factors that may affect the extraction recoveries, such as type and volume of extraction solvent (hydrophobic ionic liquid) and disperser solvent (hydrophilic ionic liquid), extraction time, sample pH and ionic strength, were investigated and optimized. Under the optimum conditions, the linear range was 1–100 μg L⁻¹, limits of detection could reach 0.21–0.49 μg L⁻¹, and relative standard deviation was 6.01–8.48 % (n = 7) for the analytes. Satisfactory results were achieved when the method was applied to analyze the target pollutants in environmental water samples with spiked recoveries over the range of 85.7–106.8 %.

     

Polymerization of Methylene Dichloride and Sodium Tetrasulfide: Synthesis and Kinetic Studies

The kinetics of the condensation polymerization of a novel polysulfide polymer based on methylene dichloride and sodium tetrasulfide is studied. The results of the experiments indicated that the reaction order is two. The activation energy obtained from the Arrhenius plot is 1.879 kcal mol^?1, and the pre-exponential frequency factor is A = 27.11 min^?1 at temperature range of 40～60°C. The polymer is characterized by using Fourier transform-infrared and CHN analysis. Thermal properties were evaluated by differential scanning calorimetry. The TGA-DTA was used to find out the thermal stability of polymer. The solvent resistance of the polymer was investigated by the swelling method.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Analytical Separations of Schiff Base Chelates by Reverse Phase Hplc on a 10 Micron C-18 Bonded Silica Subtrate

Abstract

Reverse phase partition chromatography on a 10 micron silica-bonded octadecyl hydrocarbon substrate is applied to the separation of neutral tetradentate chelates of copper (II), nickel (II) and palladium (II) with a range of non-fluorinated and fluorinated beta-ketoamine and salicylaldimine ligands. Variation of retention and resolution with respect to changes in ligand structure and metal chelated is investigated using acetonitrile, methanol and water solvent systems. Detection limits (254 nm) and linearity ranges of response are indicated.