Synergistic effects of alkali metals in the alkylation of naphthalene and toluene with ethene in the ArH–alkali metal systems in THF (ArH – naphthalene,phenanthrene)

The use of mixtures of metallic lithium and sodium in the naphthalene–alkali metal systems in THF leads to a synergistic acceleration of the naphthalene alkylation with ethene at room temperature and atmospheric pressure. The greatest synergistic effect is observed at a Li:Na molar ratio of 2:1. Under these conditions, the overall conversion of naphthalene into alkylation products (linear 1-alkylnaphthalenes and their dihydro derivatives) attains 88% after 24 h (a (Li + Na):C₁₀H₈ ratio is 2:1). The use of mixtures of metallic lithium and potassium in such systems results, however, in a synergistic retardation of the alkylation process. The strongest retarding effect is observed at a Li:K molar ratio of 1:1. The efficiency of the toluene alkylation with ethene in the naphthalene–alkali metal systems in THF is also increased on the replacement of lithium or sodium by their mixtures. The best results are obtained at a Li:Na molar ratio of 1:3. With this Li:Na ratio, toluene is almost quantitatively converted into linear and α-branched higher monoalkylbenzenes (24 h, (Li + Na):C₁₀H₈ = 2:1). The rate of the naphthalene alkylation with ethene in the presence of toluene is enhanced as well on an introduction of mixtures of lithium and sodium into the system. However the maximum of the activity is shifted here towards higher lithium content (Li:Na = 1:1). A similar synergistic effect of lithium and sodium was found on studying the toluene alkylation with ethene in the phenanthrene–Li–Na systems in THF (a (Li + Na):phenanthrene ratio is 3:1). An addition of potassium to sodium also considerably increases the efficiency of the toluene and naphthalene alkylation with ethene in the naphthalene-based systems. The possible mechanism of the alkali metal synergism in the above-mentioned alkylation reactions is discussed.     

Modeling of solid–liquid equilibria in naphthalene,normal-alkane and polyethylene solutions

A solid–liquid equilibrium (SLE) model is developed on the basis of an equation of state referred to as copolymer SAFT. This SLE model is demonstrated for hydrocarbon solutions containing totally and partially crystallizable solutes. Initially regressed and tested on the solubility data for naphthalene, normal-alkane, and polyethylene, this model is used in a sensitivity study to understand the effects of crystallizability, melting temperature, molecular weight, and pressure on solid–liquid and liquid–liquid transitions of polyethylene in subcritical and supercritical propane.     

Unsymmetric 1,3,4-oxa(thia)diazoles of quinoxaline–naphthalene conjugates

Two new series of unsymmetric 1,3,4-oxa(thia)diazoles 1a,b containing both quinoxaline and naphthalene moieties were prepared and their mesomorphic properties were investigated. The mesomorphic behavior of compounds 1a,b and 2 was studied by DSC analysis and polarized optical microscopy. All compounds 1a and 2 exhibited hexagonal columnar phases (Col_h), which were also confirmed by powder XRD diffractometer. N_cell and R_ar values equal to 5.23 and 22.73 Å² within a slice of 9.0 Å thick were also obtained for 1a (n=16), indicating that a more disc-like structure constructed by two molecules lying side-by-side was correlated in Col_h phases. In contrast, all compounds 1b were not mesogenic, and the lack of mesomorphic properties in 1b might be due to their unfavorable conformations. The PL spectra of all compounds 1a,b showed one intense peak at λ_max=509–512 nm, and these photoluminescent emissions originated from quinoxaline moiety.     

Photoinduced charge separation of phenothiazine–platinum–naphthalene diimide triads linked by twisted phenylene bridges

Two triads (i.e., 3PTZ–Pt–MNDI and 10PTZ–Pt–MNDI) consisting of 3-phenothiazine (3PTZ) or 10-phenothiazine (10PTZ), bipyridine–diacetylide platinum complex (Pt), and naphthalene diimide (MNDI) chromophores linked by highly twisted biphenylene spacers have been prepared. The formation and decay of the charge-separated (CS) states in toluene were studied by use of picosecond and nanosecond laser photolysis via selective excitation of the Pt moiety. The time required for formation of the CS state, PTZ⁺–Pt–MNDI^?, from PTZ–³Pt*–MNDI was determined to be τ _CS = 280 ps for 3PTZ⁺–Pt–MNDI^? and τ _CS = 230 ps for 10PTZ⁺–Pt–MNDI^?. The lifetimes of the CS states were determined to be τ _CR1 = 75 ns (95 %) and τ _CR2 = 285 ns (5 %) for 3PTZ⁺–Pt–MNDI^? and τ _CR = 830 ns for 10PTZ⁺–Pt–MNDI^?. Formation and decay of the CS states are discussed in terms the Marcus theory and the spin-correlated radical pair mechanism.     

Synthesis and properties of functional dyes with squaraine–naphthalene diimide hybrid structure

Naphthalene diimides (NDIs) are promising candidate for electron acceptors due to their low-lying HOMOs and LUMOs. The functinalization of soluble NDIs at the 2,6-position affects the absorption and electrochemical properties. In this study, NDI-based hybrid dyes NDI-SQ-A, B fused with squaraine chromophore were designed and synthesized in order to elucidate the effects of the substitution on their optical and electrochemical properties. These dyes were successfully synthesized by Stille coupling reactions using 3-stannylcyclobutenediones and brominated NDI derivative, followed by a condensation reaction. DFT calculation predicts that the present dyes adopt distorted structures coming from a steric hindrance between semisquaraine and NDI moieties. The hybrid dyes show low-lying LUMOs due to the introduction of electron-deficient NDI moiety and broad absorption spectra in the far-red region. The absorption spectra of their thin films were bathochromically shifted relative to those in solution, indicating that hybrid dyes formed J aggregates.     

Shape-selective isopropylation of naphthalene over H–mordenite catalysts for environmentally friendly synthesis of 2,6-dialkylnaphthalene

Recent development of advanced polymer materials such as polyethylene naphthalate, polybutylene naphthalate and liquid crystalline polymers has created an increasing demand for 2,6-dialkylnaphthalene, which has spurred interest in shape-selective naphthalene alkylation. This work deals with mordenite-catalyzed shape-selective naphthalene isopropylation to produce 2,6-diisopropylnaphthalene (2,6-DIPN). Effects of dealumination of mordenite on the structural and acidic characteristics and on the shape selectivity and activity were examined by physicochemical analysis, TPD, solid-state ²⁷Al and ²⁹Si MAS NMR, XRD, as well as catalytic alkylation reactions. Dealumination removes octahedral Al species as well as tetrahedral Al species, decreases the unit cell dimensions and reduces the number of strong acid sites in mordenites. Proper dealumination can improve selectivity to 2,6-DIPN from 33 to 61 % and significantly increases 2,6/2,7 ratio. Improved selectivity to 2,6-DIPN upon proper dealumination was attributed to the decrease in mordenite acidity, reduction in unit cell dimension and removal of some strong acid sites. However, neither the change in selectivity nor that in activity is a simple function of dealumination degree or SiO₂/Al₂O₃ ratio. Some minor difference in the apparent framework SiO₂/Al₂O₃ ratio can result in a major difference in activity or selectivity. There exist optimum conditions of dealumination as well as optimum reaction conditions for achieving higher selectivity to 2,6-DIPN.     

Solid–liquid–gas equilibrium of the naphthalene–biphenyl–CO2 system: Measurement and modeling

The first and last melting points (FLMP) method was employed to measure the melting temperature–composition (T–w$T–w$) data at solid–liquid–gas (SLG) equilibrium for the naphthalene–biphenyl–CO₂ system. Results show that the system's phase diagram is simple eutectic under all investigated pressures (0.1, 3.0, 6.0 and 8.0 MPa), and the system's eutectic composition is almost constant. The (T–w$T–w$) data measured with a high-pressure differential scanning calorimetry are in good agreement with these from FLMP. The semi-predictive model using solubility data (SMS) and the calculation model combining with G^E models (CMG) for binary systems were extended to this ternary system. For the SMS model, the Peng–Robinson equation of state (PR-EoS) with the van der Waals one-fluid mixing rule was used to correlate the solubility data of the two solutes in CO₂ to obtain the two interaction parameters k₁₂ and k₁₃ and calculate the fugacity coefficients of the solutes in the liquid and vapor phases; the UNIFAC method was also applied to the activity coefficient of the solutes in the liquid phase. For the CMG model, the PR-EoS combining respectively the MHV1, LCVM, and modified LCVM (mLCVM) mixing rules was applied to the fugacity coefficients of the solutes. Results show that the CMG model with MHV1 gives the best prediction of the system's SLG equilibrium, while the SMS model and the CMG model with mLCVM provide comparable and acceptable results.     

Comparative study of the sol–gel based solid phase microextraction fibers in extraction of naphthalene, fluorene, anthracene and phenanthrene from saffron samples extractants

We are introducing a method for the determination of some polycyclic aromatic hydrocarbons in aqueous saffron sample by direct immersion solid phase microextraction (SPME) and gas chromatography. A sol–gel technique is used for the preparation of the SPME fibers. Three kinds of sol–gel coatings on the fibers were tested and compared. They are composed of poly(dimethyl siloxane) (PDMS), poly(ethylene glycol) (PEG), and a poly(ethylene glycol) modified with multi-walled carbon nanotubes (PEG/CNTs). The effects of fiber coating, desorption time, desorption temperature, extraction time, stirring speed and salting effect were optimized. Under the optimal conditions, the detection limits (at S/N?=?3) are 7–50, 5–50, and 1–10?pg?mL^–1, respectively, for SPME fibers made from PDMS, PEG and PEG/CNTs. The relative standard deviations for one type of fiber are from 2.1% to 9.6% for all fibers (at n?=?5), and in the range from 1.9% to 9.8% from batch to batch (for n?=?3).

C–H arylation of triphenylene,naphthalene and related arenes using Pd/C

A highly selective arylation of a number of polyaromatic hydrocarbons (PAHs) with aryliodonium salts and Pd/C as the only reagent is reported. The first C–H functionalization of triphenylene is explored, and proceeds at the most sterically hindered position. This non-chelate assisted C–H functionalization extends the reactivity profile of Pd/C and provides controlled access to π-extended PAHs, an important aspect of work towards the preparation of nanographenes. Mechanistic studies suggest in situ formation of catalytically active insoluble nanoparticles, and that the reaction likely proceeds via a Pd(0)/Pd(ii) type reaction manifold.     

CuCl2-catalyzed regioselective dehydrogenative C–H activation: Synthesis of coumarin,quinolone, and naphthalene based pyrrolone derivatives

A CuCl₂-catalyzed dehydrogenative C–H activation leading to regioselective synthesis of coumarin, quinolone, and naphthalene fused heterocycles is reported. The reaction has been carried out in one pot under open atmosphere and it offers good to excellent yields of the cyclized products.     

Progress in the study of metal–organic materials applying naphthalene diimide (NDI) ligands

1,4,5,8-naphthalenediimide (NDI) derivatives are versatile in coordination and material chemistry due to their large conjugated planar structure and special electron transfer properties. This review presents an overview of metal–organic materials derived from NDIs with their structural models, analytical techniques and potential applications outlined.     

Reaction of CH acids with 2-arylidenecycloalkanones: Synthesis of β-keto acid anilide derivatives of naphthalene,indene, fluorene,and phenanthrene

Summary 2-Arylidene-cyclohexanone1, -cyclopentanone2, -1-indanone3 and-1-tetralone4 react with acetoacetanilide5 yielding 2-oxo-4-aryl-3-carboxylic acid anilides derivatives of naphthalene7, indene8, fluorene9 and phenanthrene10. Reaction of1 and3 with benzoylacetanilide6 yields the corresponding Michael adducts11 and12.

---

Reaktion von CH-Säuren mit 2-Arylidencycloalkanonen. Synthese von -Ketosäureanilid-Derivaten von Naphthalin, Inden, Fluoren und Phenanthren

Zusammenfassung 2-Arylidencyclohexanone1, -cyclopentanone2, -1-indanone3 und -1-tetralone4 reagieren mit Acetoacetanilid5 unter Bildung von 2-Oxo-4-aryl-3-carbonsäureanilid-Derivaten von Naphthalin7, Inden8, Fluoren9 und Phenanthren10. Die Reaktion von1 und3 mit Benzoylacetanilid6 ergibt die entsprechenden Michael-Addukte11 und12.

     

ortho-Quinodimethane from anthracene epidioxide: Scope of the Diels–Alder reaction and mild preparation of naphthalene derivatives

The thermal isomerisation of anthracene epidioxide 3 has been known to give phenylenedioxy-ortho-quinodimethane 5 as a reactive transient. We presented herein the scope of the Diels–Alder reaction of this transient 5 with some dienophiles. In addition, a mild synthesis of naphthalene derivatives has been developed via base-induced cleavage of the obtained Diels–Alder adducts.     

Analysis of vibrational spectra of naphthalene,deuterionaphthalenes, and chromium (η6-naphthalene)tricarbonyl based on density functional calculations

The vibrational frequencies and force constants for naphthalene (C₁₀H₈), 1,4,5,8- and 2,3,6,7-tetradeuterionaphthalenes (C₁₀H₄D₄), octadeuterionaphthalene (C₁₀D₈), and chromium (⁶-naphthalene)tricarbonyl were calculated by the DFT method using the PBE approximation in extended and split bases. The results calculated without the use of scaling factors are in good agreement with the IR and Raman experimental data. All vibrational frequencies for the free ligand and -complex molecules were assigned. The influence of coordination to the transition metal on the frequencies and force field of the naphthalene molecule (both for the free ring and the ring coordinated to the transition metal) was discussed.     

ArH＋势能曲线的从头计算

ArnH^ 是非常重要而又较简单的簇体系,对于它们的深入研究,有助于人们认识质子在溶液中的溶剂化行为,该簇中最为简单而又重要的存在形式是ArH^ 和ArnH^ 。ArH^ 可以在气相中稳定存在,在所有的ArnH^ 族中被研究得最早,实验数据也最为齐全,人们对ArH^ 体系进行了许多理论计算,但只局限于平衡键长、简正振动频率、解离能等分子参数,计算结果与已知的振动－转动光谱数据基本符合。     

The improvement of π-conjugation by the lateral benzene of anthracene and naphthalene

The 1,4-diarylnaphthalenes, 1,4-diarylanthracenes, and 9,10-diarylanthracenes containing the different side arenes, including phenyl, 2-thienyl, and 2-furyl groups, were synthesized to study the influence of structures on π-conjugation. According to photophysics and computation, the smaller dihedral angles and the lateral benzene of anthracene would increase the π-conjugation in some cases. Compared to 1,4-diarylnaphthalenes, 1,4-di(thien-2-yl)anthracene, 1,4-di(fur-2-yl)anthracene, and 9,10-di(fur-2-yl)anthracene displayed better π-conjugation in both of the ground and fluorescing excited states, but 9,10-di(thien-2-yl)anthracene only showed better π-conjugation in the fluorescing excited state.     

FRET based selective and ratiometric ‘naked-eye’ detection of CN in aqueous solution on fluorescein–Zn–naphthalene ensemble platform

We have developed a FRET-based ratiometric fluorescent probe for the detection of CN⁻ using a fluorescein–Zn–naphthalene ensemble (NFH·Zn²⁺). The sensing mechanism was ascribed by displacement approach. The chemosensor exhibits high selectivity and sensibility for CN⁻. The speculation was supported by fluorescence emission spectra, UV–vis spectrum, ¹H NMR titration experiments, and mass spectra. The interconversion of probe NFH and NFH·Zn²⁺ via the complexation/decomplexation by the modulation of Zn²⁺/CN⁻ mimics INHIBIT gate. In addition, it also shows an excellent performance in ‘dip stick’ method.     

Bulk properties and hydration numbers of components of water–salt,water–urea,and water–urea–salt systems

With an increase in the concentration of additives, the hydration numbers of compounds decrease. Thus, in a saturated 54.6% solution, urea loses approximately 3/4 of the initial amount of water, forming an aquacomplex of the composition (NH₂)₂CO?H₂O. In a supersaturated 44% solution, the sodium chloride aquacomplex is dehydrated by 2/3, and in a supersaturated 67% solution, sodium sulfate is dehydrated by 5/6. The density of these solutions is 1.354÷1.360 g/cm³ (44% NaCl) and 1.800÷1.849 g/cm³ (67% Na₂SO₄). In a saturated urea solution, NaNO₃, NaCl, and Na₂SO₄ complexes lose 53÷55% of hydration water. It is shown that the interactions in the binary water–urea system somewhat increase the hydration number of the salts (structural hydration). The hydration water density, a structurally important characteristic, increases in the series of solutions of urea, NaNO₃, NaCl, and Na₂SO₄. In the same series of additives, the excess volume of binary water–urea and water–salt systems becomes more negative.     

Effect of pressure on the solubility of naphthalene in water at 25°C

Solubility of naphthalene in water was measured at 25°C and pressures up to 200 MPa. The solubility decreased with increasing pressure. From the pressure coefficient of the solubility, the volume change V accompanying the dissolution was estimated as 13.8±0.4 cm ³ -mol ^–1 . Further we estimated the volume change V _CH accompanying hydrophobic hydration as –0.1±0.6 cm ³ -mol ^–1 using the V value, the molar volume of crystalline naphthalene, and the partial molar volume of naphthalene in n-heptane. This V _CH is much larger (i.e., less negative) than that for hydrophobic hydration of alkyl-chain compounds and suggests that the hydration structure of naphthalene differs from that of alkyl-chain compounds.     

Complex formation of nitrobenzoic acids and some naphthalene derivatives withβ-cyclodextrin

Host-guest complexation of benzoic acid, its nitro-derivatives, 1- and 2-naphthols and 1- and 2-naphthylamines with-cyclodextrin have been investigated by a spectrophotometric method. Formation constants for both the conjugate acid and base forms have been determined. Only in the case of 4-nitrobenzoic acid, is a more stable complex formed with the ionic species, compared with the undissociated one, supporting the assumption that resonance charge delocalisation and London dispersion interactions are responsible for their stability. With naphthalene derivatives, the 2-isomers give more stable complexes indicating deeper penetration into the cyclodextrin cavity.