Thermal decomposition and kinetic data of Cd(BF4)2·6H2O

The thermal dehydration and decomposition of Cd(BF₄)₂·6H₂O were studied by means of DTA, TG, DSC and X-ray diffraction methods and the end products of the thermal decomposition were identified. The results of thermal analysis show that the compound is fused first, then it is dehydrated until Cd(BF₄)₂·3H₂O is obtained, which has not been described in the literature so far. The enthalpy of phase transition is H _ph.tr.=115.6 kJ mol^–1 Separation of the compound is difficult since it is highly hygroscopic. Then, dehydration and decomposition take place simultaneously until CdF₂ is obtained which is proved by X-ray diffraction. On further increasing the temperature, CdF₂ is oxidized to CdO and the characteristic curve assumes a linear character.Based on TG data, kinetic analyses were carried out separately for both parts of the curve: first until formation of the trihydrate and then — until formation of CdF₂. The formal kinetic parameters are as follows:for the first phase:E ^*=45.3 kJ mol^–1; rate equationF=^2/3; correlation coefficient 0.9858 for the second phase:E ^*=230.1 kJ mol^–1; rate equationF=(1–)^2/3[1-(1–)^1/3]^–1; correlation coefficient 0.9982.     

Thermal decomposition kinetics and reversible hydration study of the Li2Zn(HPO4)2·H2O

The dilithium zinc hydrogen phosphate monohydrate (Li₂Zn(HPO₄)₂·H₂O) was synthesized at the ambient temperature by using zinc acetyl acetonate monohydrate, phosphoric acid and lithium hydroxide monohydrate. The thermal stability of the Li₂Zn(HPO₄)₂·H₂O was studied by non-isothermal kinetic method (Ozawa and Kissinger) from the differential scanning calorimetric (DSC) data. The studied hydrate undergoes two endothermic thermal transformations, which the first transformation is due to the release of water molecule of crystallization and the second one is due to the release of water of constituent from HPO₄^2? anions and transforms to P₂O₇^4?. The activation energies (E_a) calculated for the dehydration step and decomposition step of the Li₂Zn(HPO₄)₂·H₂O from different methods were found to be consistent. The dehydration and rehydration processes of the synthesized compound were investigated and found that the water of crystallization can be removed and rehydrated without the disrupting the structure of the material, provided it is not heated beyond 200 °C. The dehydration and rehydration processes of the synthesized Li₂Zn(HPO₄)₂·H₂O exhibits similar property to the zeolite.     

Thermal dehydration and decomposition of FeCl3·xH2O

Thermal dehydration and decomposition characteristics of Fe(III) chloride hydrate have been studied by both isothermal and non-isothermal methods. After the initial melting at 35–40°C both dehydration and decomposition of the salt proceed simultaneously at temperature above 100°C. At 250–300°C a stable hydrated Fe(OH)₂Cl is formed representing the first plateau region in the TG curve. Around 400°C, a second plateau is observed corresponding to the formation of mostly Fe₂O₃ which however retains some OH groups and Cl^– ions. However, these temperature ranges vary with the TA equipments used. Chemical analysis of the products of decomposition at temperatures above 140°C also gives evidence for the formation of FeOCl which on hydrolysis in water gives FeCl₃ in solution. The FT-IR spectra suggest the presence of structural OH groups even for samples calcined at 300–400°C. The XRD patterns of the products of decomposition in the temperature range 160–400°C indicate the presence of -FeOOH, some unidentified basic chlorides and -Fe₂O₃.The authors wish to thank the Director, R. R. L. Bhubaneswar for his kind permission to publish this paper. One of the authors (SKM) is grateful to the Council of Scientific and Industrial Research (CSIR), New Delhi for the award of a fellowship.     

Spectroscopic investigation and magnetic properties of Na2Pb1−xCuxP2O7 glasses

Phosphate glasses have several technological interests due to their specific physical properties such as high thermal expansion coefficient, high refractive indice and low melting temperature, that make them suitable for use as conductors, ionic conductors, semiconductors and biomedical materials. The phosphate glasses, in particular the pyrophosphate forms, are not widely studied. In this work we have elaborated the Na₂Pb_1−xCu_xP₂O₇ glasses, with a large range of composition (0 ≤ x ≤ 1), by conventional melting method. Thermal parameters of the glasses were determined using the differential scanning calorimetry. The structure of the glasses was investigated by IR spectroscopy. The local environment of paramagnetic ions Cu²⁺ was analyzed by EPR and magnetic measurements. It was showed that the network structure of the glasses was drastically influenced by the copper content.     

Lack of salt effect on the kinetics of the reaction SO2−4 + H3O+ → HSO−4 + H2O

It is found that the broadening of the 1100-cm⁻¹ line of SO⁻²₄, caused by increasing [H₃O⁺], is unaffected by addition of 4 M LiCl, NaBr, KCl and NH₄Cl. This finding is in line with the lack of influence of NaCl reported earlier. The significance of these findings, in terms of the reaction mechanism, is discussed.     

Thermal Transformations of CuNH4PO4⋅H2O

The isothermal and non-isothermal transformations of polycrystalline CuNH₄PO₄⋅H₂O in vacuum and in various gas atmospheres (in open air and in gaseous ammonia atmosphere) were studied at 20–800°C by means of differential thermal analysis, thermogravimetry, X-ray diffraction, paper chromatography, optical microscopy and chemical analyses. The effects of the gas phase composition on the kinetic peculiarities of total gas evolution and on the partial processes of dehydration, ammonia removal and rearrangement of the anionic sub-lattice were considered. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition study of HAuCl4·3H2O and AgNO3 as precursors for plasmonic metal nanoparticles

Thermal decomposition of HAuCl₄·3H₂O and AgNO₃, as precursors for Au and Ag nanoparticles, respectively, was monitored by coupled TG–DTA with TG/EGA–FTIR and EGA–MS techniques in a flowing 80 %Ar + 20 %O₂ and Ar atmospheres in the temperature range of 30–600 °C. The intermediate and final products of thermal decomposition were analysed by ex situ XRD and FTIR techniques. The thermal degradation of HAuCl₄·3H₂O starts immediately after melting at 75 °C and takes place in three steps in the temperature range of 75–320 °C with total mass loss of 49.4 and 49.7 % in artificial air and Ar atmospheres, respectively. EGA by MS and FTIR revealed a simultaneous release of H₂O and HCl in the temperature range of 75–235 °C. EGA by MS revealed a release of Cl₂ at around 225 °C and in the interval of 250–320 °C. According to the XRD analysis, the main solid product in the end of the first decomposition step at 190 °C is AuCl₃; in the end of the second decomposition step at 240 °C is AuCl and the final product at 320 °C is Au. The thermal decomposition of AgNO₃ takes place in a single step in the temperature range of 360–515 °C with a total mass loss of 39.0 and 37.8 % in flowing artificial air and Ar atmospheres, respectively. According to EGA–MS and EGA–FTIR the main evolved gases are NO₂, NO and O₂. The final product of the thermal decomposition at 600 °C is Ag irrespective of the atmosphere.     

Kinetics of decomposition of the liquid phase of the ternary system LiOH-H2O2-H2O in the presence of the solid phase of Li2O2 · H2O

The kinetics of decomposition of hydrogen peroxide in the liquid phase of the ternary system LiOH-H₂O₂-H₂O was studied in the presence the solid phase of Li₂O₂·H₂O and without it. The main kinetic parameters of the processes studied were determined.     

Thermochemical investigations of the systems KCl−KBr−H2O,K2SO4−(NH4)2SO4−H2O and KNO3−NH4NO3−H2O at 298.15 K

For the equilibrium solid phases occurring in the systems: KCl?KBr?H₂O, K₂SO₄?(NH₄)₂SO₄?H₂O and KNO₃?NH₄NO₃?H₂O, the concentration dependencies of differential solution enthalpies, Δ_sol H ₂ for several crystallization paths, were measured. The limiting differential solution enthalpies, Δ_sol H ₂ ⁰ , were determined by extrapolation of the above dependencies to the ionic strength,I _m ⁰ , corresponding to the appropriate binary solutions. For KCl?KBr?H₂O system only, the clear dependence between Δ_sol H ₂ ⁰ andI _m ⁰ values was found and discussed.     

Thermal decomposition of lutetium nitrate trihydrate Lu(NO3)3·3H2O

Journal of Thermal Analysis and Calorimetry - The thermal decomposition of lutetium nitrate starts with essentially a process of dehydration of the initial monomer Lu(NO3)3·3H2O with further...     

Theoretical investigation of the decomposition of monofluoromethanol

Ab initio calculations have been used to study the decomposition pathways of monofluo-roinethanol. Equilibrium geometries and transition state structures were optimized at the HF/6-31G(d) and MP2/6-31G(d) levels. Single point energies were obtained at different levels of theory. The most favorable reaction to dissociation is the 1,2-HF elimination which is consistent with the experimental results.     

Synthesis, characterization and magnetic investigation of (NH4)0.5Mn1.25(H2O)2[BP2O8]·0.5H2O

A new borophosphate compound with the composition (NH₄) _χ Mn_((3?χ)/2)(H₂O)₂ [BP₂O₈]·(1?x)H₂O was prepared under mild hydrothermal conditions and characterized by X-ray powder diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) methods. The title compound was synthesized from MnCl₂·2H₂O, H₃BO₃, and (NH₄)₂HPO₄ with variable molar ratios by heating at 180 °C for 7 days in an autoclave. The X-ray diffraction data of the water insoluble polycrystalline powder was indexed using the TREOR program in hexagonal system with the unit cell parameters of a = 9.5104, c = 15.7108 Å, Z = 6 and the space group P6₅ (No.176). (NH₄) _χ Mn_((3?χ)/2)(H₂O)₂ [BP₂O₈]·(1?x)H₂O is isostructural with (NH₄) _χ M _((3?χ) ^2)/II (H₂O)₂ [BP₂O₈]·(1?x)H₂O (M^II = Co, Cd, Mg; x = 0.5–1). Its unit cell parameters and hkl values were in good agreement with the other isostructural compounds. This is the first report presenting both the synthetic details and the indexed X-ray powder diffraction pattern of this compound along with the characterization by FTIR, thermal gravimetric analysis, scanning electron microscopy and EPR.      

Temperature dependence of the substrate selectivity in the hydroxylation of alkylbenzenes in the H2O2−H2SO4 system

The substrate selectivity in the hydroxylation of methylbenzenes in the H₂O₂−H₂SO₄ (70 wt.%) system was studied at 15–55 °C. The activation entropy correlates with the basicity of the arenes, while the substrate selectivity and activation enthalpy correspond both with the basicity and ionization potentials of ArH. We concluded that the structure of the reaction transition state is intermediate between a charge transfer complex and σ-complex. L. M. Litvinenko Institute of Physical Organic and Coal Chemistry, National Academy of Sciences of Ukraine, 70 R. Lyuksemburg ul., Donetsk 340114, Ukraine. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 35, No. 1, pp. 39–43, January–February, 1999.     

An investigation of the polythermal diagram of the H2ONa2HPO4Na2SO4 system

The polythermal diagram of the ternary system H₂ONa₂HPO₄Na₂SO₄ has been established, setting up nine isotherms obtained between 0 and 25°C by conductimetric analysis. The solubility domains of the various solid phases have been determined. One eutectic, three stable and one metastable transitional transformations have been observed. Temperature and composition of the eutectic point have been obtained by thermal analysis at constant flow.     

The thermal dehydration and decomposition of Ba[Cu(C2O4)2(H2O)]·5H2O

The thermal behaviour of Ba[Cu(C₂O₄)₂(H₂O)]·5H₂O in N₂ and in O₂ has been examined using thermogravimetry (TG) and differential scanning calorimetry (DSC). The dehydration starts at relatively low temperatures (about 80°C), but continues until the onset of the decomposition (about 280°C). The decomposition takes place in two major stages (onsets 280 and 390°C). The mass of the intermediate after the first stage corresponded to the formation of barium oxalate and copper metal and, after the second stage, to the formation of barium carbonate and copper metal. The enthalpy for the dehydration was found to be 311±30 kJ mol^–1 (or 52±5 kJ (mol of H₂O)^–1). The overall enthalpy change for the decomposition of Ba[Cu(C₂O₄)₂] in N₂ was estimated from the combined area of the peaks of the DSC curve as –347 kJ mol^–1. The kinetics of the thermal dehydration and decomposition were studied using isothermal TG. The dehydration was strongly deceleratory and the -time curves could be described by the three dimensional diffusion (D3) model. The values of the activation energy and the pre-exponential factor for the dehydration were 125±4 kJ mol^–1 and (1.38±0.08)×10¹⁵ min^–1, respectively. The decomposition was complex, consisting of at least two concurrent processes. The decomposition was analysed in terms of two overlapping deceleratory processes. One process was fast and could be described by the contracting-geometry model withn=5. The other process was slow and could also be described by the contracting-geometry model, but withn=2.The values ofE _a andA were 206±23 kJ mol^–1 and (2.2±0.5)×10¹⁹ min^–1, respectively, for the fast process, and 259±37 kJ mol^–1 and (6.3±1.8)×10²³ min^–1, respectively, for the slow process.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthday     

Thermal dehydration and decomposition of cobalt chloride hydrate (CoCl2·xH2O)

Dehydration and decomposition of an undried and a partly dried sample of hydrated CoCl₂ have been investigated by using both isothermal and non-isothermal weight loss methods. The intermediate products of dehydration and decomposition at different temperatures have been characterized by chemical analysis, X-ray diffraction, microscopy, infrared and diffuse reflectance spectroscopy. Though XRD failed to identify clearly the formation of basic salt, infrared spectra reveal the occurrence of hydrogen bonded OH groups in the samples heated at even 500°–600°C. This is further supported from the diffuse reflectance spectra of dehydrated samples which indicate tetragonally distorted co-ordination structures due to the presence of H₂O. Thermodynamic functions for different steps of dehydration have been calculated and discussed in the light of structural changes taking place in the dehydrated salts.The authors wish to express their sincere thanks to Mr. D. N. Ney, head of Pyrometallurgy Division for his keen interest and support during the course of investigation. Thanks are also due to Director R. R. L. Bhubaneswar for his kind permission to publish the paper. One of the authors is thankful the CISR, New Delhi for awarding a Junior Research Fellowship.     

Analysis of (NH4)6Mo7O24·4H2O thermal decomposition in argon

Nanometric carbides of transition metals and silicon are obtained by using precursors. Control of the course of these processes require data concerning transformations of single precursor, transformations of precursor in the presence of reducing agent and synthesis of the carbide. In this work, the way of investigating such processes is described on the example of thermal decomposition of (NH₄)₆Mo₇O₂₄·4H₂O (precursor) in argon. The measurements were carried out by TG–DSC method. The solid products were identified by XRD method, and the gaseous products were determined by mass spectrometry method. There was demonstrated that the investigated process proceeded in five stages. Kinetic models (forms of f(α) and g(α) function) most consistent with experimental data and coefficients of Arrhenius equation A and E were determined for the stages. The Kissinger method and the Coats–Redfern equation were applied. In case of the Coats–Redfern equation, the calculations were performed by analogue method. In this way good consistency between the calculated and determined conversion degrees α(T) at practically constant values of A and E were obtained for distinguished stages and different sample heating rates.