Structural transition of Ti3SiC2 under high hydrostatic pressure: A first-principles study

We theoretically studied the phase transformation, electronic and elastic properties of Ti₃SiC₂ ceramic by using the pseudopotential plane-wave method within the density functional theory. Our results demonstrate that there exists a structural phase transition from α‐Ti₃SiC₂ to β‐Ti₃SiC₂ under pressure up to 384 GPa, and α‐Ti₃SiC₂ is the most stable phase at zero pressure. The calculated electronic band structure and density of states reveal the metallic behavior for the polymorphs of Ti₃SiC₂. The mechanical stability of α‐Ti₃SiC₂ at zero pressure is confirmed by the elastic constants, and is analyzed in terms of electronic level. By analyzing the ratio between bulk and shear moduli, we conclude that α‐Ti₃SiC₂ is brittle in nature.     

Structural transition of FeSe under high pressure

The density functional calculations of the energy band structure and density of state for the tetragonal PbO-type phase α-FeSe and hexagonal NiAs-type phase β-FeSe are reported in this paper. The structural phase transition from tetragonal to hexagonal FeSe under high pressure is investigated, it is found that the calculated transition pressure for the α → β phase transformation is 8.5 GPa. Some fluctuations in the transition pressure maybe occurred by different external factors such as temperature and stress condition. There is about 17% volume collapse accompanying the α → β phase transformation.     

Superconductivity in ordered LiBe alloy under high pressure: A first-principles study

The electronic, vibrational, and superconducting properties of LiBe alloy in the P2₁/m structure under pressure have been investigated using first-principles calculations. The calculated electron–phonon coupling (EPC) of LiBe with both linear response theory and the rigid muffin-tin approximation suggested that pairing electrons are mainly mediated by the Li low-lying phonon vibrations, and the increase of the Li EPC matrix element $〈I_i^2〉$ with pressure is responsible for the increased EPC parameter $\lambda$. The application of the Allen–Dynes modified McMillan equation reveals high superconducting critical temperatures of 15.2 K at 80 GPa and 18.4 K at 100 GPa for P2₁/m LiBe.     

Structural phase transition in Bi2Te3 under high pressure

Structural change in Bi₂Te₃ under high pressure up to 16.6 GPa has been studied by powder x-ray diffraction. We observed two times of phase transitions at room temperature at the pressures of 8 and 14 GPa, respectively. According to our preliminary result on electrical resistance, it is reasonable to suppose that superconducting transition with T _c =2.8 K at the pressures of 10.2 GPa is observed in phase II. On the other hand, we found anomalies of the pressure dependences of lattice parameters and volume at around 2 GPa, which probably means the change in electrical structure on the Fermi surface.     

Electronic and optical properties of lithium niobate under high pressure: A first-principles study

We theoretically study the structural, electronic, and optical properties of lithium niobate under pressure using the plane-wave pseudopotential density functional theory by CASTEP code. It was found that there is a phase transition from the R3 c structure to the Pnma structure at a pressure of 18.7 GPa. The Pnma structure was dynamically stable according to the calculation of phonon dispersion. From the charge density distributions, there exist covalent interactions along the Nb–O bond. The hybridization between O 2p and Nb 4d orbital in the Pnma phase increases with increasing pressure, while it is not changed in the R3 c phase. With increasing pressure, the average Nb–O bond length decreases and the Nb–O bond population increases, indicating the increased covalent character between Nb and O atoms under high pressure at Pnma phase, which leads to the increased hybridization between O 2p and Nb 4d orbitals. Furthermore, the optical dielectric function, refractive index, extinction coefficient, electron energy, loss and reflectivity are calculated.     

Structural transition behavior of ZnS nanotetrapods under high pressure

ZnS nanotetrapods synthesized via a solvothermal route have a octahedral core with a zincblende (ZB) structure and four hexprism-shaped arms consisting of alternately stacking ZB and wurtzite (WZ) phases, where the WZ phase has a higher volume percentage. In situ angular-dispersive X-ray diffraction (ADXRD) measurements were carried out to study the structural behavior of ZnS nanotetrapods under high pressure up to 41.3?GPa. The initial WZ structure exhibits a very high mechanical stability to ～11.3?GPa. Both the WZ and ZB structures transform to the rocksalt (RS) structure at ～15.4?GPa. The bulk moduli of the WZ (148.2?±?8.9?GPa) and RS (165.6?±?9.9?GPa) phases are both larger than the previously reported values. These phenomena are discussed based on the alternating epitaxial growth of the WZ and ZB phases in the arms of nanotetrapods. Our study suggests that the internal structure of nanomaterials could also greatly affect their stability and transition behavior.     

3C-SiC高压相变的理论研究

基于GGA近似使用第一性原理方法对3C-SiC的ZB至NaCl相的高压相变过程进行了研究，得出中间过渡相的最高对称性为Imm2(而此前有研究认为是Cmm2和Pmm2)，激活焓计算值为0.647eV，与Catti等人的结果很接近.尽管如此，计算的相变压力为69GPa仍然比实验值100GPa小很多,可能是由于实验中的相转变具有较大的滞后性.对相变压力时两相的能带结构也作了计算和分析，可以得出相变过程除几何结构的重构之外还伴随着半导体—金属的电子转变，这对于实验上准确判断相变点有一定的指导意义. 关键词： 高压相变 第一性原理 3C-SiC 激活焓     

高压下AuCu3热动力学性质的第一性原理研究

利用平面波赝势密度泛函理论研究了AuCu3的结构性质,得到了晶格常数a、体弹模量 、体弹模量对压强的一阶导数 ,计算结果与实验值相吻合。通过准谐德拜模型成功地获得了高温高压下AuCu3的状态方程、热膨胀系数、热容及德拜温度。     

高压下AuCu3热动力学性质的第一性原理研究

利用平面波赝势密度泛函理论研究了AuCu3的结构性质,得到了晶格常数a、体弹模量B0、体弹模量对压强的一阶导数B'0,计算结果与实验值相吻合.通过准谐德拜模型成功地获得了高温高压下Au-Cu3的状态方程、热膨胀系数、热容及德拜温度.     

Structural stability and mechanical properties of Be3N2 under high pressure

Abstract

A theoretical investigations on the structural stability and mechanical properties of Be₃N₂ crystallising in α and β phases was performed using first-principles calculations based on density functional theory. The obtained ground state structure and mechanical properties are in excellent agreement with the available experimental and theoretical data. A full elastic tensor and crystal anisotropy of Be₃N₂ in two phases are determined in the wide pressure range. Results indicated that the two phases of Be₃N₂ are mechanically stable and strongly pressure dependent in the range of pressure from 0 to 80 GPa. The superior mechanical properties show that the two phases of Be₃N₂ are potential candidate structures to be the hard material. And the α-Be₃N₂ has better mechanical properties than β-Be₃N₂. By the calculated B/G ratio, it is predicted that both phases are intrinsically brittleness and strongly prone to ductility when the pressure is above 65.6 and 68.5 GPa, respectively. Additionally, the pressure-induced elastic anisotropy analysis indicates that the elastically anisotropic of Be₃N₂ in both phases is strengthening with increasing pressure, and strongly dependent on the propagation direction.     

Structural stabilities, electronic, elastic and optical properties of SrTe under pressure: A first-principles study

The structural, electronic, elastic and optical properties as well as phase transition under pressure of SrTe have been systematically investigated by first-principles pesudopotential calculations. Five possible phases of SrTe have been considered. Our results show that SrTe undergoes a phase transition from NaCl-type (B1) to CsCl-type (B2) structure at 10.9 GPa with a volume collapse of 9.43%, and no further transition is found. We find that SrTe prefer h-MgO instead of wurtzite (B4) structure for its metastable phase because that the ionic compound prefers a high coordination. The elastic moduli, energy band structures, real and imaginary parts of the dielectric functions have been calculated for all considered phases, and we find that a smaller energy gap yields a larger high-frequency dielectric constant. Our calculated results are discussed and compared with the available experimental and theoretical data.     

Structural,mechanical,electronic properties,and Debye temperature of quaternary carbide Ti3NiAI2C ceramics under high pressure:A first-principles study

Quaternary carbide Ti3NiAl2C ceramics has been investigated as a potential nuclear fusion structural material,and it has advantages in certain aspects compared ...     

Structural,mechanical, electronic properties,and Debye temperature of quaternary carbide Ti_3NiAl_2C ceramics under high pressure:A first-principles study

Quaternary carbide Ti3NiAl2C ceramics has been investigated as a potential nuclear fusion structural material,and it has advantages in certain aspects compared with Ti2AlC,Ti3AlC2,and Ti3SiC2 structural materials.In this paper,quaternary carbide Ti3NiAl2C ceramics is pressurized to investigate its structural,mechanical,electronic properties,and Debye temperature.Quaternary carbide Ti3NiAl2C ceramics still maintains a cubic structure under pressure(0–110 GPa).At zero pressure,quaternary carbide Ti3NiAl2C ceramics only has three bonds:Ti–Al,Ni–Al,and Ti–C.However,at pressures of 20 GPa,30 GPa,40 GPa,60 GPa,and 70 GPa,new Ti–Ni,Ti–Ti,Al–Al,Ti–Al,and Ti–Ti bonds form.When the pressure reaches 20 GPa,the covalent bonds change to metallic bonds.The volume of quaternary carbide Ti3NiAl2C ceramics can be compressed to 72%of its original volume at most.Pressurization can improve the mechanical strength and ductility of quaternary carbide Ti3NiAl2C ceramics.At 50–60 GPa,its mechanical strength can be comparable to pure tungsten,and the material changes from brittleness to ductility.However,the degree of anisotropy of quaternary carbide Ti3NiAl2C ceramics increases with the increasing pressure.In addition,we also investigated the Debye temperature,density,melting point,hardness,and wear resistance of quaternary carbide Ti3NiAl2C ceramics under pressure.     

Structural transitions of NaAlH4 under high pressure by first-principles calculations

First-principles calculations have been performed on NaAlH₄ using the generalized gradient approximation pseudopotential method. The predicted β-NaAlH₄ (α-LiAlH₄-type) structure is energetically more favorable than α-NaAlH₄ for pressures over 15.9 GPa, which is apparently correlated with the experimental transition pressure 14 GPa. This transition is identified as first-order in nature with volume contractions of 1.8%. There is no pressure-induced softening behavior from our calculated phonon dispersion curves near the phase transition pressure. Based on the Mulliken population analysis, the β-NaAlH₄ structure is expected to be the most promising candidate for hydrogen storage.     

高压下KMgF_3晶体光学性质的第一性原理研究

本文采用第一性原理的方法,在100 GPa的压力范围内,计算了KMgF_3的理想晶体和含空位缺陷晶体的光学性质.吸收谱数据表明,在100 GPa范围内,压力因素不会导致KMgF_3晶体在可见光区有光吸收行为.钾、镁和氟空位缺陷的存在会使得KMgF_3晶体的吸收边红移(其中氟空位缺陷引起的红移最显著),但这些红移不会导致它在可见光区出现光吸收的现象.能量损失谱数据显示,压力因素不仅会使得KMgF_3晶体的能量损失谱有蓝移的行为,而且还会引起它的较强谱峰个数发生变化.在100 GPa处的缺陷晶体数据指明,氟空位缺陷会导致其能量损失谱的两个较强谱峰的峰值强度明显降低.分析表明,KMgF_3晶体有成为冲击窗口材料的可能,并且本文所获得的结果对未来的实验探究有参考作用.     

高压下BaLiF3晶体光学性质的第一性原理研究

本文采用第一性原理方法, 在190 GPa的压力范围内, 计算了BaLiF3理想晶体和含空位点缺陷晶体的光学性质. 吸收谱数据表明, 压力因素不会导致BaLiF3晶体在可见光区有光吸收的行为. 空位点缺陷的存在会使得BaLiF3的吸收边红移(其中氟空位点缺陷引起的红移最显著) , 但这些红移不会导致它在可见光区内出现光吸收的现象. 波长在532 nm处的折射率数据显示, BaLiF3的折射率将随压力升高而增大. 氟空位点缺陷将导致BaLiF3的折射率增大, 但钡空位点缺陷和锂空位点缺陷的存在对其基本没有影响. 本文预测, BaLiF3晶体有成为冲击光学窗口材料的可能.     

氮化铂在高压下的相变及弹性性质的第一原理计算

用PBE形式下的广义梯度近似（GGA）赝势平面波方法研究了氮化铂的结构相变以及弹性性质,计算了氮化铂的氯化钠（B1）、氯化铯（B2）、闪锌矿（B3）、纤维矿（B4）等四种结构并应用高压下的焓与压强的关系,得出在常温常压下B4结构是最稳定的结构,这与Yu 等人得的结果一致,且 B4→B1及B1→B2的相变压强分别发生在36.7 GPa和 185.4 GPa,同时,研究了B4结构在高压的弹性性质,发现弹性常数、体模量、剪切模量、压缩波速、剪切波速以及德拜温度均随着压强的增大而单调增大     

氮化铂在高压下的相变及弹性性质的第一原理计算

用PBE形式下的广义梯度近似（GGA）赝势平面波方法研究了氮化铂的结构相变以及弹性性质,计算了氮化铂的氯化钠（B1）、氯化铯（B2）、闪锌矿（B3）、纤维矿（B4）等四种结构并应用高压下的焓与压强的关系,得出在常温常压下B4结构是最稳定的结构,这与Yu 等人得的结果一致,且 B4→B1及B1→B2的相变压强分别发生在36.7 GPa和 185.4 GPa,同时,研究了B4结构在高压的弹性性质,发现弹性常数、体模量、剪切模量、压缩波速、剪切波速以及德拜温度均随着压强的增大而单调增大     

Structural, high pressure and elastic properties of transition metal monocarbides: A FP-LAPW study

The structural, elastic and thermal properties of four transition metal monocarbides ScC, YC (group III), VC and NbC (group V) have been investigated using full potential linearized augmented plane wave (FP-LAPW) method within generalized gradient approximation (GGA) both at ambient and high pressure. We predict a B₁ to B₂ structural phase transition at 127.8 and 80.4 GPa for ScC and YC along with the volume collapse percentage of 7.6 and 8.4%, respectively. No phase transition is observed in case of VC and NbC up to pressure 400 and 360 GPa, respectively. The ground state properties such as equilibrium lattice constant (a₀), bulk modulus (B) and its pressure derivative (B′) are determined and compared with available data. We have computed the elastic moduli and Debye temperature and report their variation as a function of pressure.