利用激光多普勒测振仪的空气耦合超声声场测量*

进行了空气耦合超声声场测量的实验研究。使用激光多普勒测振仪测量由声波引起的激光路径上的介质折射率变化,进而得到空气和固体材料内部的时域瞬态声压。通过直接测量空耦换能器的辐射声功率,给出对单个空耦换能器灵敏度的直接评价方法。用空耦换能器激励K9玻璃板的漏兰姆波,观测到空气中的直达波和反射波、固体板内和空气中的漏兰姆波,实现了空气和固体中微弱声波的非侵入式实验测量,为空耦换能器的特性评估和空耦检测系统的声场测量提供了实验方法。     

Experimental analysis of flexural waves in river ice

Results of a full-scale experiment on reception of vibroacoustic signals excited in river ice by a pulsed source are discussed. The oscillograms of signals reveal the presence of air acoustic and bottom seismic waves, as well as flexural waves propagating in ice, which manifest themselves in the form of wave trains separated in arrival time. Experimental data are used to measure the group velocity and the damping decrement of flexural waves and the velocity of bottom-seismic waves. The theoretical estimate obtained for the group velocity of flexural waves in terms of the liquid-thin plate model agrees well with the value obtained from the experiment.     

Visual characteristics of inhomogeneous acoustic waves

Experimentally obtained visualizations of propagating inhomogeneous acoustic waves driven by zero-order antisymmetric Lamb waves (flexural waves) in water are presented. The inhomogeneous waves are visualized by optical holographic interferometry. A series of photographs show the evolution in time of instantaneous acoustic pressure distributions associated with propagating inhomogeneous waves. The photographs reveal characteristic features of flexurally driven inhomogeneous waves such as transversely attenuated wavefronts oriented perpendicularly to the plate boundary and a phase propagation velocity along the boundary approximately equal to the plate wave velocity (250 meters/second). Effects due to the dispersive nature of the flexural plate waves are also noted in the photographic series. Features distinguishing these subsonic, inhomogeneous surface waves (also called trapped or evanescent waves) from the leaky, lateral or head wave and also from incompressible fluid motions associated with low frequency vibrations of fluid loaded plates are identified. The relevance of inhomogeneous acoustic waves driven by subsonic flexural waves to practical sound-structure interaction problems is discussed.     

The measurement of A0 and S0 lamb wave attenuation to determine the normal and shear stiffnesses of a compressively loaded interface

Guided waves in an elastic plate surrounded by air propagate with very low attenuation. This paper describes the effect on this propagation of compressively loading an elastomer with high internal damping against one surface of the elastic plate. The propagation of both A0 and S0 Lamb modes is considered. The principal effect is shown to be increased attenuation of the guided waves. This attenuation is caused by leakage of energy from the plate into the elastomer, where it is dissipated due to high viscoelastic damping. It is shown that the increase in attenuation is strongly dependent on the compressive load applied across the solid-solid interface. This interface is represented as a spring layer in a continuum model of the system. Both normal and shear stiffnesses of the interface are quantified from the attenuation of A0 and S0 Lamb waves measured at each step of the compressive loading. The normal stiffness is also measured independently by normal incidence, bulk longitudinal wave ultrasound. The resulting predictions of wave propagation behavior, such as attenuation, obtained by the model are in excellent agreement with those measured experimentally.     

Shear-horizontal waves in a rotated Y-cut quartz plate in contact with a viscous fluid

We study shear-horizontal (SH) waves in a crystal plate of rotated Y-cut quartz in contact with a semi-infinite viscous fluid. The crystal plate and the fluid are governed by the equations of anisotropic elasticity and the theory of Newtonian fluids. A transcendental equation that determines the dispersion relations of the waves is obtained. Approximate analytical solutions to the equation are presented for the case of low viscosity fluids and the case of long waves whose wavelength is much larger than the plate thickness. The effects of the fluid viscosity and density on the dispersion relations of the waves are examined. The results obtained are fundamental and useful to the understanding and design of acoustic wave fluid sensors for measuring fluid viscosity or density.     

Dynamic material parameters in an anisotropic plate estimated by phase-stepped holographic interferometry

Material parameters in an anisotropic plate are determined using two non-destructive measuring techniques: real-time phase-stepped electronic speckle pattern interferometry and dual-reference-beam pulsed holographic interferometry. The first technique is used to measure the lower modes of vibration of the plate with free-free boundary conditions. Finite element analysis is then used to determine two effective Young's moduli and the in-plane shear modulus. The second technique is used to detect transient bending waves propagating in the plate and acoustic waves propagating in the surrounding air. A double-pulsed laser is used both to generate the waves and to make holographic recordings of the wave fields. The stiffness of the plate is estimated using the measured deformation field and an analytical solution to the plate impact problem.     

一种减小尺寸的声彩虹捕获效应结构*

该文提出了一种减小尺寸的彩虹捕获效应结构,在铁板上刻上深度相同的空气凹槽阵列并加入周期性缝板单元,通过调节缝宽得到不同的等效折射率。该文对1000 Hz～2000 Hz的声波进行仿真实验,仿真结果表明不同频率的声波被局域在不同的位置,即实现了彩虹捕获效应。由于局域处声波群速度很小,局域处声场能量得到很大的提升。相对于传统的深度渐变的空气凹槽结构,我们的结构尺寸更小,可调性更强,更容易实现对低频声波的捕获效应。该结构具有能量加强和声波空间分离的效应,相信在声吸收、声波识别等领域有着潜在的应用前景。     

On the propagation of long thickness-stretch waves in piezoelectric plates

We study the propagation of thickness-stretch waves in a piezoelectric plate of polarized ceramics with thickness poling or crystals of class 6 mm whose sixfold axis is along the plate thickness. For device applications we consider long waves with wavelengths much longer than the plate thickness. A system of two-dimensional equations in the literature governing thickness-stretch, extensional, and symmetric thickness-shear motions of the plate is further simplified. The equations obtained can be used to analyze piezoelectric plate acoustic wave devices operating with thickness-stretch modes.     

分层固体板中导波的激发与频散特性

针对无限大弹性分层固体板,研究了结构中导波的频散和激发特性。首先使用传递矩阵法推导分层板模型中导波的频散方程,然后用二分法求取导波各模式的频散曲线,进而分析结构中导波的频散特性。结果表明:在速度递增或递减的分层板中,基阶模式和高阶模式的高频极限分别等于低速层的瑞利波速和横波波速。对于含低速夹层的分层板,所有模式的高频极限都等于低速层的横波速度。在导波激发特性方面,研究了在具有一定宽度的法向力源作用下的分层板中导波各模式在结构中的法向位移谱。发现在速度递增的分层板结构中基阶模式是主导模式,而对于速度递减和含低速夹层模型,主导模式在不同的频段范围内对应不同的导波模式。      

Generalized thermoelastic Lamb waves in a plate bordered with layers of inviscid liquid

The propagation of thermoelastic waves in a homogeneous isotropic, thermally conducting plate bordered with layers of inviscid liquid or half-space of inviscid liquid on both sides is investigated in the context of generalized theories of thermoelasticity. Secular equations for the plate in closed form and isolated mathematical conditions for symmetric and antisymmetric wave modes in completely separate terms are derived. The results for coupled and uncoupled theories of thermoelasticity have been obtained as particular cases. The different regions of secular equations are obtained and special cases, such as Lame modes, thin plate waves and short wavelength waves of the secular equations are also discussed. The secular equations for thermoelastic leaky Lamb waves are also obtained and deduced. The amplitudes of displacement components and temperature change have also been computed and studied. Finally, the numerical solution is carried out for an aluminum-epoxy composite and aluminum materials plate bordered with water. The dispersion curves for symmetric and antisymmetric thermoelastic wave modes and amplitudes of displacement and temperature change in case of fundamental symmetric (S₀) and skew symmetric (A₀) modes are presented in order to illustrate and compare the theoretical results. The theory and numerical computations are found to be in close agreement. The results have been deduced and compared with the relevant publications available in the literature at the relevant stages of the work.     

Guided waves in a plate with linearly varying thickness: experimental and numerical results

The aim of this work is to give experimental and numerical results on the behaviour of guided waves that propagate downslope in a free elastic plate with slowly linearly varying thickness. We show experimentally the propagation of adiabatic modes, which are guided waves that adapt to the varying thickness of the plate. As the thickness is decreasing, a given guided wave will reach its thickness cut-off. When this happens, we show that two phenomena occur: the reflection of this wave and its propagation backward in the plate, its conversion into a different guided wave which goes on propagating downslope in the plate. The numerical study is done with the software Ansys, based on the finite element method. The results obtained confirm the experimental ones.     

套管中模式波的响应特征*

在固井质量评价中主要利用套管中模式波的幅度或衰减变化反映水泥的胶结状况,不同测井仪器在套管中激发的模式波的类型不同,研究套管中各模式波的传播特征和影响因素可充分挖掘测量数据的潜在应用价值。CBL和SBT等测井仪器在套管中主要激发拉伸波,类同于平板中的零阶对称Lamb波,水泥环封隔测井仪器的斜入射模式在套管中主要激发套管弯曲波,类同于平板中的零阶反对称Lamb波,垂直入射模式激发套管共振波,类同于平板中的高阶对称Lamb波。该文重点分析了这些模式波的衰减特征及其对微环的响应,套管弯曲波在套后耦合轻质水泥时对微环不敏感,但在套后耦合常规水泥或重水泥时,其衰减明显高于胶结良好的状况;拉伸波对微环的存在最为敏感;套管共振波对微环不敏感。     

Absorption of zero Lamb waves in an elastic layer by mechanical resonators with friction

The propagation of zero Lamb waves in a plate with mechanical resonators attached to its surfaces is studied. It is shown that, in a plate that is single-mode for symmetric (antisymmetric) waves, the zero symmetric (antisymmetric) Lamb wave can be absorbed by mechanical resonators with a certain friction. The single-mode (for symmetric or antisymmetric waves) plate can be not thin compared to the wavelength of the transverse wave.     

Nonlinear acoustic wave generation in a three-phase seabed

Generation of an acoustic wave by two pump sound waves is studied in a three-phase marine sediment, which consists of a solid frame and the pore water with air bubbles in it. To avoid shock-wave formation, the interaction is considered in the frequency range where there is a significant sound velocity dispersion. Nonlinear equations are obtained to describe the interaction of acoustic waves in the presence of air bubbles. An expression for the amplitude of the generated wave is obtained and numerical analysis of its dependence on distance and resonance frequency of bubbles is performed.     

Laser-ultrasonic generation of Lamb waves in the reaction force range

The Laser-ultrasonic generation of Lamb waves in an elastic plate is investigated theoretically and experimentally for a laser source whose intensity is high enough to create reaction forces (normal tractions) on the illuminated surface of the specimen. The analytical solutions for transient waves are derived using the integral transform method first by considering an arbitrary source shape and time excitation function, and then specifically for circular and line source shapes. The simulation study allows us not only to predict the behavior of individual wave modes but also to construct the overall responses; thus it helps us better understand the wave excitation mechanisms. The dispersive and multi-modal nature of laser-generated Lamb waves is presented by showing the spatiotemporal Fourier transform of displacements obtained by the simulation study. The transform, displayed in the frequency-wave number domain, enunciates the characteristics of the propagating individual Lamb wave modes. The simulation results are then compared with the 2-D Fourier transform of a set of experimental data obtained by scanning an aluminum plate specimen.     

Investigation of the phase velocities of guided acoustic waves in soft porous layers

A new experimental method for measuring the phase velocities of guided acoustic waves in soft poroelastic or poroviscoelastic plates is proposed. The method is based on the generation of standing waves in the material and on the spatial Fourier transform of the displacement profile of the upper surface. The plate is glued on a rigid substrate so that it has a free upper surface and a nonmoving lower surface. The displacement is measured with a laser Doppler vibrometer along a line corresponding to the direction of propagation of plane surface waves. A continuous sine with varying frequencies was chosen as excitation signal to maximize the precision of the measurements. The spatial Fourier transform provides the wave numbers, and the phase velocities are obtained from the relationship between wave number and frequency. The phase velocities of several guided modes could be measured in a highly porous foam saturated by air. The modes were also studied theoretically and, from the theoretical results, the experimental results, and a fitting procedure, it was possible to determine the frequency behavior of the complex shear modulus and of the complex Poisson ratio from 200 Hz to 1.4 kHz, in a frequency range higher than the traditional methods.     

Propagation Properties of Backward Lamb Waves in Plate Investigated by Dynamic Photoelastic Technique

The dynamic photoelastic technique is employed to visualize and quantify the propagation properties of backward Lamb waves in a plate. Higher energy leaikage of second-order symmetric backward wave mode S_(2 b) in contrast to third-order anti-symmetric backward mode A3 b is shown by the dispersion curve of a plate immersed in water,and then verified by experiments. To avoid the considerable high leakage, the plate is placed in air, both group and phase velocities of modes S_(2 b) and A3 b in the glass plate are experimentally measured. In comparison with the theoretical values, less than 5% errors are found in experiments.     

Generation of waves in an elastic plate by a torsional moment and a horizontal force

An approximate solution is determined for the motion of an infinite elastic plate, excited by a torsional moment (with the axis of the moment normal to the plate) and by a horizontal force (parallel to the plate). The driving moment and force are sinusoidal in time and applied to a small rigid indenter with a circular base, fixed to the plate. The solution is obtained from a three-dimensional approach but is evaluated only for low frequencies, where the wavelengths of the quasi-longitudinal, tranverse and bending waves are much larger than the thickness of the plate. For the case of excitation with a torsional moment, the solution contains two parts, one describing a travelling transverse wave and the other a local reaction. The local reaction is built up of two infinite sums of Love waves with imaginary wave numbers. The driving-point admittance due to the local reaction is larger than the admittance due to the tranverse wave when the diameter of the indenter is smaller than about twice the thickness of the plate. For the case of excitation with a horizontal force, the solution contains three parts that describe travelling waves (quasi-longitudinal, transverse and bending) and two parts that describe the local reaction (infinite sums of Lamb and Love waves). The admittances due to the three types of travelling waves are all of the same order of magnitude. The admittance due to the local reaction is of importance when the frequency is relatively high and the diameter of the identer much smaller than the thickness of the plate. For both cases of excitation, the admittance due to the local reaction increases with increasing thickness of the plate and tends to the value found for a semi-infinite medium.     

Generalized thermoelastic extensional and flexural wave motions in homogenous isotropic plate by using asymptotic method

In this paper the asymptotic method has been applied to investigate propagation of generalized thermoelastic waves in an infinite homogenous isotropic plate. The governing equations for the extensional, transversal and flexural motions are derived from the system of three-dimensional dynamical equations of linear theories of generalized thermoelasticity. The asymptotic operator plate model for extensional and flexural free vibrations in a homogenous thermoelastic plate leads to sixth and fifth degree polynomial secular equations, respectively. These secular equations govern frequency and phase velocity of various possible modes of wave propagation at all wavelengths. The velocity dispersion equations for extensional and flexural wave motion are deduced from the three-dimensional analog of Rayleigh-Lamb frequency equation for thermoelastic plate. The approximation for long and short waves along with expression for group velocity has also been obtained. The Rayleigh-Lamb frequency equations for the considered plate are expanded in power series in order to obtain polynomial frequency and velocity dispersion relations and its equivalence established with that of asymptotic method. The numeric values for phase velocity, group velocity and attenuation coefficients has also been obtained using MATHCAD software and are shown graphically for extensional and flexural waves in generalized theories of thermoelastic plate for solid helium material.     

Transmission of structure-borne sound from a beam into an infinite plate

An analytical study of transmission of structure-borne sound from a semi-infinite beam into an infinite, isotropic plate is presented. The beam is assumed to carry a torsional, a quasi-longitudinal and bending wave and the transmission is obtained with the help of the admittances of the beam and the plate. The analysis is restricted to the case of low frequencies but is otherwise general; thus due regard is given not only to the bending wave of the plate but also to the other propagating waves and to the local reactions. An interesting result from the study is that a bending wave on the beam will transfer a substantial part of its power into quasi-longitudinal and transverse waves in the plate, especially if the plate is thin compared with the beam. This is thought to be a factor that is important and not so easily quantifiable in the analysis of a complex structure. The local reactions on the other hand are of small importance for the power transmission from a torsional and quasi-longitudinal wave on the beam but may be important for the transmission of a bending wave, especially if the Young's modulus of the beam is larger than that of the plate.