Preparation and optical properties of Cu2O hollow microsphere film and hollow nanosphere powder via a simple liquid reduction approach

In this work, we report a simple liquid reduction approach to prepare Cu₂O hollow microsphere film and hollow nanosphere powder with Cu(OH)₂ nanorods as precursor and ascorbic acid as the reductant at 60 °C. When Cu(OH)₂ nanorod array film grown on a copper foil is used as the precursor, Cu₂O thin film made up of hollow microspheres with average diameter of 1.2 μm is successfully prepared. When the Cu(OH)₂ nanorods are scraped from the copper foil and then used as the precursor, Cu₂O hollow nanosphere powder with the average diameter of 270 nm is obtained. The samples are characterized by X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and ultraviolet-vis light (UV-vis) absorption spectra. A possible formation mechanism of Cu₂O hollow spheres is discussed.     

In situ synthesis of Cu2O nano/microstructures on a copper substrate assisted with mixed cationic/anionic surfactants

Different morphologies of Cu₂O nano/microstructures have been successfully prepared on copper foil via a mild hydrothermal process in the presence of mixed cationic/anionic surfactants, by using copper foil to serve as both copper source and substrate. The reaction system of mixed cationic/anionic surfactants and the reaction temperature play key roles in the formation of different morphologies of Cu₂O nano/microstructures. X-ray diffraction (XRD), field emission scanning electron microscope (SEM), transmission electron microscope (TEM), selected area electron diffraction (SAED) and room temperature photoluminescence (PL) spectra are used to characterize the as-obtained products. The PL results confirmed that the Cu₂O structures exhibited good optical properties. A reasonable formation mechanism was proposed based on the experimental results.     

Morphology transformation of Cu<Subscript>2</Subscript>O by adding TEOA and their antibacterial activity

Cu₂O polyhedral particles and hollow spheres were successfully synthesized by adjusting the concentration of triethanolamine (TEOA). The as-prepared samples were structurally characterized by the scanning electron microscope (SEM), X-ray powder diffraction (XRD), and transmission electron microscopy (TEM). The results revealed that the solid polyhedral Cu₂O with sizes ranging from 70 to 150 nm was in good crystallization. The diameter of the hollow Cu₂O spheres increased to 350–450 nm. It was found that the sizes and morphologies of the products could be significantly affected by the concentration of TEOA. And the morphology of Cu₂O transformed from solid polyhedrons to hollow spheres with the further enrichment of TEOA concentration. A possible mechanism was proposed to explain the formation of the hollow Cu₂O spheres. In addition, we investigated the antibacterial activities of the samples. It was demonstrated that the hollow Cu₂O sphere exhibited better antibacterial activities for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) compared with the solid polyhedral Cu₂O.     

Controlled synthesis of cuprous oxide nanospheres and copper sulfide hollow nanospheres

Uniform Cu₂O nanospheres have been successfully synthesized by reducing CuSO₄ with ascorbic acid in sucrose solution at room temperature. The diameter of the Cu₂O nanospheres can be tuned from 90 to 280 nm by adding different amounts of sucrose in the solution. Furthermore, CuS hollow nanospheres with different diameters have been obtained based on the Kirkendall effect using the as-prepared Cu₂O nanospheres as sacrificial templates. Cu₂O/Cu_7.2S₄ core/shell nanospheres and Cu_7.2S₄ hollow nanospheres are obtained as the intermediate products at different stages of the conversion process. Through the post-treatment of sodium citrate solution, Cu_7.2S₄ hollow nanospheres can be changed into CuS hollow nanospheres. The products are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and field-emission scanning electron microscopy (FESEM). Optical properties of the products have also been studied.     

One-pot synthesis of uniform hollow cuprous oxide spheres fabricated by single-crystalline particles via a simple solvothermal route

Uniform Cu₂O hollow spheres fabricated by single-crystalline particles (smaller than 20 nm) are facile synthesized in ethylene glycol (EG) solution by a simple solvothermal route without using pre-fabricated templates and reductive agents. EG in this protocol is not only used as a solvent, complexing agent, and reducing agent, but also served as a structure-directing agent for the formation of hollow structure. By control of reaction conditions, such as reaction time, temperature, and the anions, the morphology and structure of the hollow spheres can be tuned. A coordination adsorption and oriented attachment and Ostwald ripening mechanism is proposed for explaining the formation process of hollow Cu₂O spheres in EG solution; and importantly, the hollow Cu₂O spheres exhibit an excellent property for the electro-catalytic oxidization of ascorbic acid in acetic acid buffer solution. Moreover, the hollow spherical Cu₂O particles could be potentially applied in catalysis, sensor, and as model for fundamental research.     

Graphene-based hollow TiO2 composites with enhanced photocatalytic activity for removal of pollutants

Catalytically active graphene-based hollow TiO₂ composites(TiO₂/RGO) were successfully synthesized via the solvothermal method. Hollow TiO₂ microspheres are uniformly dispersed on RGO. X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (DRS) and photoluminescence (PL) were used for the characterization of prepared photocatalysts. The mass of GO was optimized in the photocatalytic removal of rhodamine B (RhB) as a model dye pollutants. The results showed that graphene-based hollow TiO₂ composites exhibit a significantly enhanced photocatalytic activity in degradation of RhB under either UV or visible light irradiation. The formation of the graphene-based hollow TiO₂ composites and the photocatalytic mechanisms under UV and visible light were also discussed.     

Effect of calcination temperature on the structure and hydroxylation activity of Ni0.5Cu0.5Fe2O4 nanoparticles

Nanocrystalline Ni_0.5Cu_0.5Fe₂O₄ was synthesized by sol-gel method with varying calcination temperature over the range of 500-1000. The powders obtained were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). In addition, thermal analysis (TG-DTG-DTA) of the precursor was carried out. The study reveals the simultaneous decomposition and ferritization process at rather low temperature (280-350). For the crystalline structure investigated, single cubic spinel is gained when the precursor was decomposed at 800-1000, whereas separated crystal CuO formed when calcination temperature is below 800. The increase of calcination temperature favors the appearance of Fe_B³⁺, Cu_A²⁺ and O on the spinel surface. The hydroxylation activity is relative to the amount of Cu_B²⁺ species on the spinel surface. The lattice oxygen species on the spinel surface are favorable for the deep oxidation of phenol.     

Microwave-assisted synthesis of Fe3O4 nanorods and nanowires in an ionic liquid

Without using inert gas to prevent the oxidation of Fe²⁺, Fe₃O₄ nanorods and nanowires have been successfully synthesized via a microwave-assisted ionic liquid method (MAIL). Compared to the traditional methods, the whole reaction process can be carried out more easily and faster. Our result shows that temperature and time of microwave heat played important roles in the formation of Fe₃O₄ with different morphologies. These products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and FT-IR spectra.     

Syntheses of optically efficient (La1−x−yCexTby)F3 nanocrystals via a hydrothermal method

Optically efficient cerium and terbium doped lanthanide fluoride (La_1−x−yCe_xTb_y)F₃ nanocrystals with different doping concentrations have been synthesized by a hydrothermal route in the presence of ethylenediamine tetraacetic acid disodium salt (EDTA). The results showed that the formation of nanocrystals with different morphologies depends on terbium ion Tb³⁺ doping concentration, but independent of cerium ion Ce³⁺ doping concentration. With increase in Tb³⁺ doping concentration, the morphologies of nanocrystals evolved from a spherical shape to a plated-like one. In addition, both the photoluminescence quantum yield (PL QY) and the fluorescence lifetime of nanocrystals increased with the increase in Ce³⁺ doping concentration in cerium and terbium co-doped system. The PL QY reached up to 55%, and the lifetime up to 7.3 ms. Transmission electron microscopy (TEM), X-ray diffraction (XRD), selected area electron diffraction (SAED), X-ray fluorescence (XRF), energy dispersive spectroscopy (EDS), ultraviolet-visible (UV-vis) absorption, photoluminescence (PL) and infrared (IR) spectroscopies were employed to characterize the properties of nanocrystals. The growth mechanism of nanocrystals with different morphologies and optical properties of nanocrystals with different doping concentrations were investigated.     

Molten salt synthesis of LaF<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> nanoplates with tunable size and their luminescence properties

A molten salt route to LaF₃:Eu³⁺ nanoplate with tunable size was developed and the products were characterized by the X-ray diffraction (XRD), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM) and high-resolution TEM (HR-TEM). It is found that the nanoplates with different sizes (ca. 46, 20, and 12 nm) could be obtained when the molar ratio of the reagents NH₄F and La(NO₃)₃ · 6H₂O was adjusted. The possible formation process of reaction was discussed, and the reasonable mechanism of size controlling was also proposed. Furthermore, the luminescent properties of all the samples with different sizes and doping levels were investigated at room temperature.     

Template-free synthesis of ZnV2O4 hollow spheres and their application for organic dye removal

Hollow ZnV₂O₄ spheres with the shell aggregated by small nanoparticles were successfully synthesized through a facile one-pot template-free solvothermal method. The as-prepared product was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), and Brunauer-Emmett-Teller N₂ adsorption-desorption analyses. The formation of ZnV₂O₄ hollow spheres was based on flowerlike intermediate products supported reduction-dissolution-aggregation process at the expense of consumption of all the flowerlike products. The obtained ZnV₂O₄ hollow spheres showed a good adsorption capacity of methylene blue (MB) organic dye, which might be attributed to their special structural feature with large surface area. The adsorption kinetics and isotherm of MB on ZnV₂O₄ hollow spheres were also studied.     

Facile synthesis and phase control of copper chalcogenides with different morphologies

A series of stoichiometric and nonstoichiometric copper–chalcogenide nanocrystallines with different morphologies, e.g., extremely high aspect ratio nanofibers (Cu₉S₈), tubular structure (Cu _x S (x=∼1.86–1.96), nanorods (CuS, Cu₃₁S₁₆), platelets (β-CuSe, Cu₃Se₂), rope-like Cu₃Se₂, as well as spherical nanoparticles (Cu₇Se₄, Cu_2−x Se), have been successfully synthesized in 20 vol% water and 80 vol% organic solvents mixture under mild conditions. The products were characterized by various techniques, including X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electronic diffraction (ED), and high-resolution transmission electron microscopy (HRTEM). The studies of the optical properties revealed that the copper chalcogenides have a wide absorption in the range of about 400–700 nm, with accessional IR band. Systematic studies showed that the mixture of 20 vol% water and 80 vol% organic solvents played a key role in controlling the copper chalcogenides with different morphologies and phases.     

Sol–gel synthesis of 8 nm magnetite (Fe3O4) nanoparticles and their magnetic properties

Magnetite (Fe₃O₄) nanoparticles were successfully synthesized by a sol–gel method. The obtained nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive analysis by X-ray (EDAX), transmission electron microscopy (TEM), superconducting quantum interference device (SQUID) and Mössbauer spectrometry. XRD and Mössbauer measurements indicate that the obtained nanoparticles are single phase. TEM analysis shows the presence of spherical nanoparticles with homogeneous size distribution of about 8 nm. Room temperature ferromagnetics behavior was confirmed by SQUID measurements. The mechanism of nanoparticles formation and the comparison with recent results are discussed. Finally, the synthesized nanoparticles present a potential candidate for hyperthermia application given their saturation magnetization.     

Green synthesis of soya bean sprouts-mediated superparamagnetic Fe3O4 nanoparticles

Superparamagnetic Fe₃O₄ nanoparticles were first synthesized via soya bean sprouts (SBS) templates under ambient temperature and normal atmosphere. The reaction process was simple, eco-friendly, and convenient to handle. The morphology and crystalline phase of the nanoparticles were determined from scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD) spectra. The effect of SBS template on the formation of Fe₃O₄ nanoparticles was investigated using X-ray photoemission spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The results indicate that spherical Fe₃O₄ nanoparticles with an average diameter of 8 nm simultaneously formed on the epidermal surface and the interior stem wall of SBS. The SBS are responsible for size and morphology control during the whole formation of Fe₃O₄ nanoparticles. In addition, the superconducting quantum interference device (SQUID) results indicate the products are superparamagnetic at room temperature, with blocking temperature (T_B) of 150 K and saturation magnetization of 37.1 emu/g.     

Doping dependent room-temperature ferromagnetism and structural properties of dilute magnetic semiconductor ZnO:Cu nanorods

Copper doped ZnO nanoparticles were synthesized by the chemical technique based on the hydrothermal method. The crystallite structure, morphology and size were determined by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) for different doping percentages of Cu²⁺ (1-10%). TEM/SEM images showed formation of uniform nanorods, the aspect ratio of which varied with doping percentage of Cu²⁺. The wurtzite structure of ZnO gradually degrades with the increasing Cu²⁺ doping concentration and an additional CuO associated diffraction peak was observed above 8% of Cu²⁺ doping. The change in magnetic behavior of the nanoparticles of ZnO with varying Cu²⁺ doping concentrations was investigated using a vibrating sample magnetometer (VSM). Initially these nanoparticles showed strong room-temperature ferromagnetic behavior, however at higher doping percentage of copper the ferromagnetic behavior was suppressed and paramagnetic nature was enhanced.     

Novel synthesis and electrophoretic response of low density TiO-TiO2-carbon black composite

Novel low density TiO-TiO₂-carbon black composite was synthesized, which involved the deposition of inorganic coating on the surface of core-shell latex particles and subsequent removal of latex particles by calcination in high-purity nitrogen. The morphology and interior structure were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The images exhibited the composite had spherical shape and smooth surface, and the interior structure was hollow or porous. X-ray diffraction peaks (XRD) were mostly in agreement with the standard diffraction patterns of rutile TiO₂. In addition, the observed peaks at 2θ of 43.5°, 50.6° and 74.4° can be indexed to (1 1 1), (2 0 0) and (2 2 0) planes of cubic phase TiO. The X-ray photoelectron spectroscopy (XPS) results indicated that composite consisted of carbon black, TiO and TiO₂. The apparent density of the composite was suitable to 1.62 g cm⁻³, due to density matching with suspending media. Glutin-arabic gum microcapsules containing TiO-TiO₂-carbon black composite electrophoretic liquid were prepared via complex coacervation. The particles in the microcapsules showed excellent electrophoretic mobility under a DC field.     

A novel approach to fabrication of superparamagnetite hollow silica/magnetic composite spheres

We described a method for synthesizing hollow silica/magnetic composite spheres using sulfonic acid functionalized hollow silica spheres (SAFHSS) as templates. The Fe₃O₄ nanoparticles were deposited on or imbedded in the hollow silica shell by a precipitation reaction. The morphologies, composition and properties of the hollow composite spheres were characterized by transmission electron microscopy, Fourier transform infrared analysis, X-ray diffraction measurement and vibrating-sample magnetometry measurement. The results indicated crystal sizes and amount of the Fe₃O₄ nanoparticles on the SAFHSS. The magnetic properties of the hollow composite spheres were controlled by adjusting the proportion between Fe²⁺ and Fe³⁺ and iron ion total concentration. When appropriate loading species were added into the system, superparamagnetite hollow composite spheres were obtained. The method also could be applicable to prepare other superparamagnetite hollow silica/ferrite composite spheres.     

Synthesis of fluorinated TiO2 hollow microspheres and their photocatalytic activity under visible light

Fluorinated TiO₂ hollow microspheres with three-dimensional hierarchical architecture were prepared by solvothermally treatment using solid microspheres as precursor. The obtained solid and hollow TiO₂ microspheres were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectrum (DRS) and photoluminescence (PL) spectra. The photocatalytic activity of as-prepared solid and hollow TiO₂ microspheres was determined by degradation of methyl orange (MO) under visible light irradiation. The results showed that the surface fluorination, the existence of accessible mesopores channels, and the increased light harvesting abilities could remarkably improve the photocatalytic activity of TiO₂ hollow microspheres.     

CO oxidation activity of Cu–CeO2 nano-composite catalysts prepared by laser vaporization and controlled condensation

Ceria supported copper catalysts were synthesized by laser vaporization and controlled condensation method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDAX) and temperature programmed reduction (TPR). The catalytic activity of the nanopowders for CO oxidation reaction was tested in a fixed bed flow tube reactor in Ar–20%O₂–4%CO mixture. Irrespective of the copper content, the catalytic activity of the nanopowders is similar in the initial CO test, and the catalytic activity improves (i.e. the light-off temperature decreases) during a subsequent run. The lowest light-off temperature during the second run is recorded in the material with 20% copper. TEM studies on 20%Cu–CeO₂ sample in the as-prepared condition and after CO test exhibit two types of ceria particles namely, polygonal particles 3–5 nm in size and spherical particles of 15–20 nm in size. Rapid cooling of the nanoparticles formed during the laser ablation results in incorporation of a large amount of copper within the ceria as solid solution. Presence of solid solution of copper is confirmed by EDAX and electron diffraction analyses. In addition, copper-rich surface layer of Cu₂O is found over the spherical particles. The cerium oxide components are essentially identical before and after CO test, except that the polygonal CeO₂ particles contain newly formed fine crystals of CuO. TPR results reveal two reduction peaks, which further supports, the presence of two different copper species in the material. The shift in light-off temperature during the second run is attributed to the synergistic interaction between newly formed CuO crystals with the CeO₂ matrix.     

Ti<Superscript>3+</Superscript>-doped TiO<Subscript>2</Subscript> hollow sphere with mixed phases of anatase and rutile prepared by dual-frequency atmospheric pressure plasma jet

A novel method of synthesizing Ti³⁺-doped TiO₂ was proposed. Ti³⁺-doped TiO₂ hollow spheres were prepared with different thickness of carbon shell by using atmospheric pressure plasma jet generated by dual-frequency power sources. The as-synthesized Ti³⁺-doped TiO₂ hollow microspheres were characterized by X-ray diffraction (XRD) pattern, scanning electron microscope (SEM) images, high-resolution transmission electron microscopy (HRTEM) images, Raman spectra, X-ray photoelectron spectroscopy (XPS), and UV–vis spectra. These results indicated that these samples had mixed phases of anatase and rutile and the structure of hollow sphere varied with different thickness of carbon shell. The Ti-O-C chemical bond was the connection between the TiO₂ hollow sphere and carbon layer. Amount of Ti³⁺ ions were found, which were accompanied with the formation of oxygen vacancies. Meantime, the as-synthesized catalysts also display strong absorption in the visible light region and have a narrow band energy gap. Optical emission spectroscopy (OES) was used to observe different excited species in the discharge area. These results showed that the oxygen content had a significant impact on the number of oxygen vacancies. Finally, the photocatalytic activities of as-prepared samples were evaluated by decomposition of rhodamine B aqueous solution, which showed better photocatalytic activity under UV–vis light irradiation.