DSC and p-V-T Study of PVC/PMMA Blends

Poly(vinyl chloride)/Poly(methyl methacrylate) — PVC/PMMA — blends were investigated by comparative p-V-T and differential scanning calorimetry (DSC) measurements. The study was concentrated on the glass transition range of the blends, and it was found that the blends are characterized by a single glass transition temperature suggesting miscibility of the blend components. It is shown that the glass temperature of the blends increases with both increasing heating rate and pressure. In parallel hereto one observes a decrease in the volume expansion coefficients, which is more accentuated for the polymeric melts than for the polymeric glasses. The dependence of the glass temperature on the composition of the polymer blends shows a sigmoidal behaviour which is due to the fact that positive deviations of the glass temperature from values predicted by additivity rules are observed in the high PVC concentration range, whereas in the high PMMA range negative deviations occur. This suggests a denser packing of the blends and thus a stronger interaction between the blend components in the high PVC concentration range. These packing differences increase with increasing pressure and decreasing heating rate and are generally more accentuated for the glass temperatures evaluated from p-V-T measurements.This revised version was published online in November 2005 with corrections to the Cover Date.     

FTIR Studies of Doped PMMA - PVC Blend System

The IR spectroscopy study shows miscibility between PMMA-PVC blends due to hydrogen bonding between CO of PMMA and hydrogen from CHCl of PVC. This blend system is doped by Camphor Sulphonic Acid (CSA) in the entire composition range. The doping of CSA in PVC, in PMMA and in PMMA-PVC blends shows changes in FTIR spectra. The interaction between PVC and CSA is through hydrogen bonding between CO of CSA and CHCl of PVC. Doping PMMA with CSA, indicate an interaction between H⁺ ion of CSA and oxygen atoms of CO and  OCH₃ of PMMA. Whereas in PMMA–PVC blend interaction between H⁺ ion of CSA and oxygen atom of CO of PMMA.     

FTIR studies of PVC/PMMA blend based polymer electrolytes

The polymer electrolytes composing of the blend of polyvinyl chloride-polymethyl methacrylate (PVC/PMMA) with lithium triflate (LiCF3SO3) as salt, ethylene carbonate (EC) and dibutyl phthalate (DBP) as plasticizers and silica (SiO2) as the composite filler were prepared. FTIR studies confirm the complexation between PVC/PMMA blends. The CCl stretching mode at 834 cm-1 for pure PVC is shifted to 847 cm-1 in PVC-PMMA-LiCF3SO3 system. This suggests that there is interaction between Cl in PVC with Li+ ion from LiCF3SO3. The band due to OCH3 at 1150 cm-1 for PVC-PMMA blend is shifted to 1168 cm-1 in PVC-PMMA-LiCF3SO3 system. This shift is expected to be due to the interaction between Li+ ion and the oxygen atom in PMMA. The symmetric vibration band and the asymmetric vibration band of LiCF3SO3 at 1033 and 1256 cm-1 shifted to 1075 and 1286 cm-1 in the DBP-EC plasticized PVC-PMMA-LiCF3SO3 complexes. The interaction between Li+ ions and SiO2 will lead to an increase in the number of free plasticizers (which does not interact with Li+ ions). When the silica content increases from 2% to 5%, the intensity of the peak at 896 cm-1 (due to the ring breathing vibration of free EC) increases in PVC-PMMA-LiCF3SO3-DBP-EC system.     

Miscibility studies on the blends of collagen/chitosan by dilute solution viscometry

The viscosity behavior of collagen, chitosan and their blends at several compositions (2/8, 4/6, 5/5, 6/4, 8/2) has been studied. The miscibility of this polymer system was investigated on the basis of the sign of the criteria ΔB, Δb, Δ[η], α and β determined by dilute solution viscosity. These investigations indicate that collagen/chitosan is miscible at any composition in HAc at 25 °C. According to the “memory effect”, we can conclude that collagen/chitosan is also miscible in the solid state.     

Study of the properties of rigid and plasticized PVC/PMMA blends

The aim of this work is to study the structure-properties relationship of rigid and plasticized PVC/PMMA blends. For that purpose, blends of variable compositions were prepared in the absence and in the presence of a plasticizer di (ethyl-2 hexyl) phtalate or DEHP. The miscibility of the two polymers was investigated by differential scanning calorimetric analysis (DSC) and Fourier transform infrared spectroscopy. The weight loss from 30 to 600°C was investigated by thermogravimetric analysis (TGA). The thermal degradation under nitrogen at 185°C was studied and the amount of HCl released from PVC was measured by the pH method. Furthermore, the variation of mechanical properties such as tensile behavior, hardness and impact resistance was investigated for all blend compositions.     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.     

Miscibility studies on blends of poly(phenylene oxide)/brominated polystyrene by viscometry

The viscosity behavior of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO), brominated polystyrene (PBrS) and their blends at several compositions (25/75, 50/50, 75/25, 85/15) has been studied. The miscibility of this polymer system was investigated on the basis of the sign of the criteria Δb, α, ΔK, μ, and Δ[η] determined by viscosity. These investigations indicate that PPO/PBrS is miscible at the compositions of (75/25), (85/15) and completely immiscible at the compositions of (25/75), (50/50) in chloroform at 20 °C. Results from viscometry match very well those of DSC results cited in the literature.     

Thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends

The aim of this work was to study the thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends. For that purpose, blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of diethyl-2-hexyl phthalate as plasticiser. Their miscibility was investigated by using differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). Their thermo-oxidative degradation at 180 ± 1 °C was studied and the amount of HCl released from PVC was measured by a continuous potentiometric method. Degraded samples were characterised, after purification, by FTIR spectroscopy and UV-visible spectroscopy. The results showed that the two polymers are miscible up to 60 wt% of poly(methyl methacrylate) (PMMA). This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (CO) of PMMA and hydrogen (CHCl) groups of PVC as shown by FTIR analysis. On the other hand, PMMA exerted a stabilizing effect on the thermal degradation of PVC by reducing the zip dehydrochlorination, leading to the formation of shorter polyenes.     

Miscibility of polymer blends studied by a simplified method of data analysis using light heating modulated temperature DSC

A simple method of application of light heating modulated temperature DSC to a study of miscibility of polymer blends has been developed. In this method only the sample was measured and the standard materials were not used. The total heat flow, the complex heat capacity, the reversing and non-reversing heat flows were obtained as values measured from those quantities in hypothetical glassy state at T>T_g. The values of the hypothetical glassy state were calculated by extrapolation from T<T_g. The present method gives relative values but useful information can be obtained from the results. Some results from miscible and immiscible polymer blends are shown. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structure of reactively extruded rigid PVC/PMMA blends

A novel route for producing polymer blends by reactive extrusion is described, starting from poly (vinyl chloride)/methyl methacrylate (PVC/MMA) dry blend and successive polymerization of MMA in an extruder. Small angle X‐ray scattering (SAXS) measurements were applied to study the monomer's mode of penetration into the PVC particles and to characterize the supermolecular structure of the reactive poly(vinyl chloride)/poly(methyl methacrylate) (PVC/PMMA) blends obtained, as compared to the corresponding physical blends of similar composition. These measurements indicate that the monomer molecules can easily penetrate into the PVC sub‐primary particles, separating the PVC chains. Moreover, the increased mobility of the PVC chains enables formation of an ordered lamellar structure, with an average d‐spacing of 4.1 nm. The same characteristic lamellar structure is further detected upon compression molding or extrusion of PVC and PVC/PMMA blends. In this case the mobility of the PVC chains is enabled through thermal energy. Dynamic mechanical thermal analysis (DMTA) and SAXS measurements of reactive and physical PVC/PMMA blends indicate that miscibility occurs between the PVC and PMMA chains. The studied reactive PVC/PMMA blends are found to be miscible, while the physical PVC/PMMA blends are only partially miscible. It can be suggested that the miscible PMMA chains weaken dipole–dipole interactions between the PVC chains, leading to high mobility and resulting in an increased PVC crystallinity degree and decreased PVC glass transition temperature (T_g). These phenomena are shown in the physical PVC/PMMA blends and further emphasized in the reactive PVC/PMMA blends. Copyright © 2005 John Wiley & Sons, Ltd.     

The asymmetrical orientational behavior of compatible blends of PMMA and PVC

The orientation and relaxation behavior of compatible blends of poly(methyl methacrylate) (PMMA) and poly(vinyl chloride) (PVC) was investigated. The deformation was performed at 9 K above the glass transition temperature. Based on birefringence and IR-dichroic measurements, it was found that the orientation of PMMA is strongly increased in the blends as compared to pure PMMA at identical draw ratios.The orientation of PVC, on the other hand, is not changed by blending. The results are discussed in terms of friction coefficients and their enhancement by molecular interactions.Dedicated to Prof. E. W. Fischer on the occasion of his 665th birthday     

DC Electrical Study of Modified PMMA,PVC and their Blend

Summary: Thin films of high molecular weight PMMA, PVC and their blend were prepared with solution cast method. Further they were modified by adding Camphor Sulphonic Acid (CSA) to them. DSC studies indicate single glass transition temperature (Tg) for unmodified as well as modified blends indicating the miscibility of polymers. FTIR studies show the interaction between CSA-PVC, CSA-PMMA, CSA-(PVC+PMMA) blend. The D.C. electrical study was carried out at various temperatures from room temperature (307 K) to 373 K. After modification the variation of DC conductivity (σ) is found to decrease in PVC and the PVC-PMMA blend whereas it is found to increase in PMMA with rise in temperature.     

Kinetics of isothermal thermogravimetrical degradation of PVC/ABS blends

The PVC/ABS blends were degradated by means of isothermal thermogravimetry at temperatures at 210...240°C in nitrogen. Applying the stationary point method to the data obtained from thermogravimetric curves, apparent activation energy, preexponential factor and compensation parameter for each blend were calculated. The constancy of compensation parameters points to an unchanged mechanism of poly (vinyl-chloride) (PVC) thermal degradation in the presence of acrylonitrile butadiene-styrene (ABS). Upon increasing the fraction of ABS in the blend up to 50% only the kinetics of the process is changed.     

Thermogravimetric analysis of PVC/ELNR blends

The thermal behaviour of a series of solution-cast blends of polyvinyl chloride/epoxidised liquid natural rubber (ELNR) of different mole percentage of epoxidation has been examined using thermogravimetric analysis. Thermal degradation is found to occur through a two-step route in which the first step corresponds to the dehydrochlorination of PVC to form a polyene and the second step is attributed to the decomposition of the ELNR and the polyene. Introduction of 20 and 50 mol% of epoxy group into the liquid NR is found to enhance the thermal stability of PVC. Probable mechanisms of degradation have been suggested on the basis of the kinetic analysis of the degradation studies. It is found that the mechanism is influenced by the epoxy content of the blend system. Activation energy for the degradation and the entropy change have also been reported.     

Structure formation of PVDF/PMMA blends studied

Conformational formation and crystallization dynamics of miscible PVDF/at-PMMA and PVDF/iso-PMMA polymer blends from the molten state were studied by the simultaneous DSC/FT-IR measurement. Formation of TGTG' conformation occurred before starting crystallization exothermic peak in the PMMA content (_PMMA) range from 0 to 0.4 for both blends. The formation rate of TGTG' conformation, crystal growth rate and surface free energy of PVDF crystal in blends depended linearly on _PMMA for PVDF/at-PMMA, however, those rates for PVDF/iso-PMMA slightly influenced by _PMMA. These results suggested that the former was miscible blend in molecular level, however, the latter was a miscible blend with large concentration fluctuation or a partially segregated system.     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

TG-MS analysis of nitrile butadiene rubber blends (NBR/PVC)

Blends of nitrile butadiene rubber (NBR) with polyvinyl chloride (PVC) are widely used in products such as hoses and seals. As part of a project that uses NBR/PVC blends for manufacturing forest fire hoses, blends of NBR/PVC with various inorganic fillers, such as Mg(OH)₂, china clay (organic modified kaolin) and nano clay (organic modified bentonite) were studied by TG-MS. No significant changes were observed to the type of the polymers’ decomposition products, compared to that of NBR/PVC blend without additives. The most remarkable change was the absence of HCl from decomposition products in the presence of the Mg(OH)₂ additive.     

Characterization of blends of poly(vinyl chloride) and poly(N‐vinyl pyrrolidone) by FTIR and 13C CP/MAS NMR spectroscopy

Blends of poly(vinyl chloride) (PVC) with Poly(N‐vinyl pyrrolidone) (PVP) were investigated by Fourier infrared spectroscopy (FTIR) and high‐resolution solid‐state ¹³C cross‐polarization/magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) spectroscopy. The intermolecular interactions between PVP and PVC are weaker than the self‐association of PVP and the inclusion of the miscible PVC results in the decreased self‐association of PVP chains, which was evidenced by the observation of high‐frequency shift of amide stretching vibration bands of PVP with inclusion of PVC. This result was further substantiated by the study of ¹³C CP/MAS spectra, in which the chemical shift of carbonyl resonance of PVP was observed to shift to a high field with inclusion of PVC, indicating that the magnetic shielding of the carbonyl carbon nucleus is increased. The proton spin‐lattice relaxation time in the laboratory frame (T₁ (H)) and the proton spin‐lattice relaxation time in the rotating frame (T_1ρ(H)) were measured as a function of the blend composition to give the information about phase structure. It is concluded that the PVC and PVP chains are intimately mixed on the scale of 20–30Å. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2412–2419, 1999     

Miscibility and phase separation in SAN/PMMA blends investigated by positron lifetime measurements

Miscibility and phase separation in SAN/PMMA blends have been investigated using DSC, IR spectroscopy and positron lifetime spectroscopy (PLS). Single broad glass transition observed throughout the blend compositions, may be due to overlap of two glass transitions. IR measurements clearly indicate the absence of strong interactions. This supports miscibility is due to intramolecular repulsive forces in the SAN component. On the other hand, free volume data show negative deviation from linear additivity indicating the blends are miscible. The interchain interaction parameter β exhibits a complex behavior and the extent of miscibility is not revealed. Following Wolf’s treatment, we have evaluated the geometry factor γ and hydrodynamic interaction parameter α and found α is a suitable parameter in predicting the miscibility window. The cloud points in SAN/PMMA blends increase with decreasing PMMA content. The change in free volume size correlates well with the observed change in cloud point.     

Characterization of cyclodextrincarbopol interactions by DSC and FTIR

The interactions between Carbopol and β-cyclodextrin (BCD) or hydroxypropyl-β-cyclodextrin (HPBCD) were studied by differential scanning calorimetry (DSC) and FTIR spectroscopy. Aqueous solutions of both components were desiccated by freeze-drying or heating in an oven (films) at various temperatures. The use of different drying procedures allowed their influence on the interactions to be studied. The evolution of the Carbopol glass-transition was also evaluated by DSC using first heating runs up to different temperatures. Disappearance of the Carbopol glass-transition was observed in the freeze-dried systems prepared with either of the cyclodextrins and in the films that contained HPBCD. The changes in the FTIR band of Carbopol at 1700 cm^-1 confirmed the existence of interactions with both cyclodextrins, especially with HPBCD. This information may be useful for optimising the solubilizing capacity and controlled release performance of aqueous Carbopol-cyclodextrin systems. This revised version was published online in July 2006 with corrections to the Cover Date.