Synthesis, structure and electrochemistry of cationic diruthenium complexes of the type [(N∩N)2Ru2(CO)2(μ-CO)2(μ-OOCFc)] containing a ferrocenecarboxylato bridge and two chelating aromatic diimine ligands

The dinuclear bis(ferrocenecarboxylato) complex Ru₂(CO)₄(μ-OOCFc)₂(py)₂ (Fc = ferrocenyl, py = pyridine) was found to react with aromatic diimines (2,2′-dipyridyl, 4,4′-dimethyl-2,2′-dipyridyl, 1,10-phenanthroline, 5-nitro-1,10-phenanthroline, and 5-amino-1,10-phenanthroline) in methanol to give the cationic diruthenium complexes [(N∩N)₂Ru₂(CO)₂(μ-CO)₂(μ-OOCFc)]⁺ (1: N∩N = 2,2′-dipyridyl, 2: N∩N = 4,4′-dimethyl-2,2′-dipyridyl, 3: N∩N = 1,10-phenanthroline, 4: N∩N = 5-nitro-1,10-phenanthroline, 5: N∩N = 5-amino-1,10-phenanthroline), which have been isolated as the hexafluorophosphate salts. The molecular structure of 3, solved by single-crystal X-ray analysis of the tetraphenylborate salt [3][BPh₄], shows a diruthenium backbone bridged by two carbonyl and by one ferrocenecarboxylato ligand, the two 1,10-phenanthroline ligands being in the axial positions. Cyclic voltammetry in dichloromethane reveals for all compounds two successive oxidations due to ferrocene/ferrocenium redox couple and oxidation of the diruthenium core.     

Enantioselektive synthese von isobutenyl-cyclobutancarbons?uren als vierring—analoga zur chrysanthemums?ure—II1

The enantiomers of 2,2-dimethyl-3-cis-(2'-methylpropenyl)-cyclobutane-1-carboxylic acids (4 and 4') and 2,2-dimethyl-3-trans-(2'-methylpropenyl)-cyclobutane-1-carboxylic acids (10 and 10') were synthesized m optically pure state. Starting from (?)-α-pinene (14) resp. (+)-α-pinene (14') 2,2-dimethyl-3-cis-formyl-cyclobutane-1-car-boxylic acid methylester (21 and 21') was received in an enantioselective pathway and isomerised by acid-catalysisto 2,2-dimethyl-3-trans-formyl-cyclobutane-1-carboxylic acid methylester (23 and 23'). In a following Wittig-reaction the 4 aldehyde-esters 21, 21', 23 and 23' were converted to the enantiomers of isobutenyl-cyclobutane-carboxylic acid methylesters and esterified by m-phenoxibencylic alcohol resp. hydrolysed to isobutenyl-cyclo-butane-carboxylic acids.     

Crown ethers with converging neutral binding sites: Synthesis and complexation with t-butylammonium hexafluorophosphate

The influence of substituents in close proximity to crown ether cavities, on the stability of complexes of the crown ethers with t-butylammonium salts, has been investigated. Crown ethers with intra-annular donor substituents (2–4) were prepared by the reaction of 2-acetylresorcinol (1) with polyethylene glycol ditosylates and subsequent modification of the acetyl group. Crown ethers with substituents above and below the plane of the crown ether 0 atoms were synthesized by the reaction of 2,2'-dihydroxy-1,1'-biphenyls with polyethylene glycol ditosylates. Chloromethylation of 5,5'-dimethyl-1,1'-biphenyl crown ethers (6) yielded 4,4'-bis(chloromethyl)-1,1'-biphenyl crown ethers (10). 3,3'-Disubstituted-1,1'-biphenyl crown ethers (13–24) were synthesized by the reaction of 3,3'-diallyl-2,2'-dihydroxy-1,1'-biphenyl (12) with polyethylene glycol ditosylates. The allyl groups of 13 were isomerized with sodium hydride to propen- 1-yl groups. Ozonolysis of 13 and 14 gave the corresponding dialdehydes (15 and 18) which were converted into other 3,3'-disubstituted biphenyl-20-crown-6 derivatives (RCH₂COOMe, CH₂COOH, CH₂OH, CH₂Cl, CH₂OMe, OH and Me) by standard operations. The thermodynamic stability of the complexes of these functionalized crown ethers with t-butylammonium hexafluorophosphate has been studied in deuterochloroform in competition experiments with m-xyleno-18-crown-5 and benzo-15-crown-5 as the reference compounds. The nature of the 2-substituents in the crown ethers 2 and 3 has little effect on the stability of the complexes. The stability of the complexes of 3,3'-disubstituted biphenyl crown ethers depends of ringsize and the size and nature of the substituents. The most stable complexes are those of 24 (R = Me) and 14 (R=CH=CHMe).The Me groups in 24 represent the optimum between relief of O-O repulsion in the polyether ring and steric hindrance of complexation. The propen-1-yl substituents of 14 stabilize the complex because they provide extended π-electron donor stabilization. Substitution at the 4- and 4'-positions of the aryl groups has little effect on the stability of the complexes.     

Some metallofluorescent derivatives of 2,2'-diamino-diphenyl-n,n,n',n'-tetraacetic acid

The N,N,N',N'-tetraacetic acid derivatives of five 4,4'-disubstituted 2,2'-diaminodiphenyls have been prepared and their fluorescent properties examined. 2,2'-Diaminodiphenyl-4,4'-dicarboxylic acid-N,N,N',N'-tetraacetic acid exhibits intense fluorescence in aqueous solution above pH 4, and forms stable non-fluorescent l:1 complexes with copper(II) and nickel(II) ions at pH 7.5. The quenching of the fluorescence of the compound by nickel(II) may be used in the fluorimetric determination of nickel.     

Synthesis, characterization and crystal structure determination of platinum(IV) complexes containing, bipyridine derivatives and chloride, [Pt(5,5′-dmbipy)Cl4] and [Pt(6-mbipy)Cl4]

The complex [Pt(5,5′-dmbipy)Cl₄] (1) (5,5′-dmbipy is 5,5′-dimethyl-2,2′-bipyridine) was prepared from the reaction of H₂PtCl₆·6H₂O with 5,5′-dimethyl-2,2′-bipyridine in methanol. The same method was employed to make [Pt(6-mbipy)Cl₄] (2) (6-mbipy is 6-methyl-2,2′-bipyridine). Both complexes were characterized by elemental analysis, IR, UV–Vis, ¹H NMR, ¹³C NMR and ¹⁹⁵Pt NMR spectroscopy. Their solid state structures were determined by the X-ray diffraction method.     

Studies of heterocyclic compounds: III. Synthesis and thermal decompositions of some 2-thiophenemercuric derivatives

2-Thiophenemercuric chloride(I), on reaction with sodium or silver thiocyanate, silver azide, silver acetate, and silver trifluoromethanesulfonate gave the 2-thiocyanate (2), 2-azide (4), 2-acetate (5) and 2-trifluoromethanesulfonate (6), respectively. The thermal decompositions of these compounds, together with that of 2,2'-dithienyl mercury, have been studied. The 2-thiophenemercuric triflate (6) decomposes at room temperature to give 2,2'-dithienylmercury. The 2-azide (4), when treated with either cyclohexene or triphenylphosphine, gave only the 2,2'-dithienylmercury. All the 2-thiophenemercuric salts decompose at about 300°C to give only a black insoluble residue. With the aid of some control experiments and comparison with previous work on phenyl- and p-tolyl-mercuric salts, a mechanism is proposed to account for the results.     

Mixed-ligand complexes of copper(I) with diimines and phosphines: Effective catalysts for the coupling of phenylacetylene with halobenzene

New copper(I) mixed-ligand complexes 1–4 of the formula Cu(N–N)PR₃X, where N–N = 1,10-phenanthroline (phen), 2,2′-bipyridine (bpy), 5,5′-dimethyl-2,2′-bipyridine (5,5′dimbpy) and PR₃ = tricyclohexylphosphine, tris(2-cyanoethyl)phosphine and isopropyldiphenylphosphine, have been synthesized. The complexes were characterized by EA, IR, NMR and single crystal X-ray diffraction. The solution fluorescence emission spectra were measured. The single crystal X-ray analysis showed that the copper(I) ion is four-coordinate with a distorted tetrahedral geometry. The complexes catalyze the formation of diphenylacetylene from the coupling of halobenzene with phenylacetylene. The complex Cu(5,5′-dimethylbpy)P{(cyhexyl)₃}I showed the highest catalytic activity. At room temperature all four complexes exhibit, in dichloromethane, emission maxima in the 329–344 nm range, corresponding to intra-ligand excited states.     

Chelate polypyridine ligand rearrangement in Au(III) complexes

The reaction of gold(III) neutral complexes AuBr(CN)₂(N–N) {N–N = 2,2′-bipyridine (bpy), 5,5′-dimethyl-2,2′-bipyridine (^Me2bpy), 1,10-phenanthroline (phen)} with a stoichiometric amount of K[AuCl₄] · 2H₂O in nitromethane at room temperature led to the formation of 1:1 electrolytes which were characterized by NMR and IR spectroscopy, conductivity measurements, elemental analyses and X-ray diffraction. Both the anions and the cations of these salts are singly charged square-planar Au(III) complexes and the cations have general formula [AuCl₂(N–N)]⁺. A hypothesis on the possible reaction mechanisms is presented to give an explanation for the formation of the reaction products.     

Heterocyclic-fused tropylium ions—VI : Syntheses and stability of 4h-dithieno[2,1-b;3,4-b']tropylium fluoborate and 7h-dithieno[l,2-b;4,3-b']tropylium fluoborate

The synthesis of the two novel dithienotropylium ions 4H - dithieno[2,1-b; 3,4-b']tropyliumfluoborate 1 and 7H - dithieno[1,2 - b; 4,3 - b']tropyliumfluoborate 2 is described. The key reaction in achieving the tricyclic ring system was the reaction of 3,3' - bis - bromomethyl - 2,2' - bithienyl and 2,2' - bisbromomethyl - 3,3' - bithienyl, respectively, with sodium ethyl malonate. The pK_R+ values of 1 and 2 were determined by potentiometric titration and found to be 5.6 and 6.0, respectively.     

Oxidative Coupling in a Series of Derivatives of 4a,9-Diaza-1,2,4a,9a-tetrahydrofluorene. 6. Reactions with Substituted 2-Aminoethanols

Oxidative coupling of derivatives of 4a,9-diaza-1,2,4a,9a-tetrahydro-9H-fluorene with 2-ethyl-, 2,2-dimethyl-, and 2-hydroxymethyl-2-methylaminoethanol in the presence of MnO₂ led to the selective formation of the corresponding mono- and di(hydroxymethyl)quinonediimines, subsequent cyclization of which gave the products of 6,7-annelation. Coupling with 2,2-di(hydroxymethyl)aminoethanol gave the annelation products directly.     

Spectrophotometric or absorptiometric determination of copper with 2,2'-diaminodiethylether-n,n.n', n'-tetraacetic acid

A spectrophotometric determination of copper with 2,2'-diaminodiethylether-N,N,N',N'-tetraacetic acid is proposed. Maximum absorbance is obtained at 720 mμ at pH 2 (1–3) and 25–650 μg Cu/ml can be determined. The reaction is unaffected by temperature or time of standing, and very few ions interfere. A 1 : 1 copper-EEDTA complex is formed.     

Synthesis and reactions of 2-naphthyltellurium trichloride

TeCl₄, and naphthalene, when heated to 110° in the absence of a solvent, yielded 2-naphthyltellurium trichloride (2), which on treatment with degassed Raney Ni afforded 2,2'-binaphthyl in excellent yield. Reaction of 2 with propene and cis-2-butene produced the corresponding 1:1-adducts, which however could not be coupled to 2-(2-chloroalkyl)naphthalenes with this reagent.     

The preparation of novel 4,4'- and N,N'-linked pipecolic acid derivatives

Routes used for the preparation of the novel 4,4'- and N,N'-linked pipecolic acids (1a,band 2b,c) are described and discussed together with the characterisation of the products and intermediates.     

Approaches to wired terpyridine: Bithienyl alkynyl derivatives of 2,2′:6′,2″-terpyridine and their ruthenium(II) complexes

Two approaches to the formation of ruthenium(II) complexes containing ligands with conjugated 2,2′:6′,2″-terpyridine (tpy), alkynyl and bithienyl units have been investigated. Bromination of 4′-(2,2′-bithien-5′-yl)-2,2′:6′,2″-terpyridine leads to 4′-(5-bromo-2,2’-bithien-5′-yl)-2,2′:6′,2″-terpyridine (1), the single crystal structure of which has been determined. The complexes [Ru(1)₂][PF₆]₂ and [Ru(tpy)(1)][PF₆]₂ have been prepared and characterized. Sonogashira coupling of the bromo-substituent with (TIPS)CCH did not prove to be an efficient method of preparing the corresponding complexes with pendant alkynyl units. The reaction of 4′-ethynyl-2,2′:6’,2″-terpyridine with 5-bromo-2,2′-bithiophene under Sonogashira conditions yielded ligand 2, and the heteroleptic ruthenium(II) complex [Ru(2)(tpy)][PF₆]₂ has been prepared and characterized.     

New synthesis of substituted 3-aryl-1-naphthaldehydes

A general, unequivocal procedure for the preparation of specifically substituted 3-aryl-1-naphthaldehydes was developed. Benzylmagnesium bromides with 5-aryl-2, 2-dimethyl-4-pentene-3-ones (12) gave exclusively 1,4-addition products, 5,6-diaryl-2,2-dimethyl-3-hexanones (13). The hexanones on oxidation with peracetic acid gave 3,4-diarylbutanoic acids (14), which were cyclized to tetralones (15). The tetralones on treatment with MeMgI followed by dehydration and dehydrogenation gave 3-aryl-1-methylnaphthalenes (10), which were converted into corresponding aldehydes (11). When benzylmagnesium bromides were added to 4-aryl-3-butene-2-ones (1), mixtures of 1,2 and 1,4-addition products were formed. Further treatment of these mixtures also yielded the desired methylnaphthalenes along with various identified side products.     

Studies of nucleosides and nucleotides—LXXIV: Purine cyclonucleosides—34 a new method for the synthesis of 2'-substituted 2'-deoxyadenosines

8,2'-O-Cycloadenosine was protected at 3' and 5'-OHs with acetyl groups and cleaved using liq. H₂S. Subsequent dethiolation and mesylation gave 2'-O-mesyl-3',5'-di-O-acetyl-arabinosyladenine (6). When 6 or its deacetylated parent compound (7) was heated with sodium azide in DMF, 3'-azido-3'-deoxyxylofuranosyladenine (9) was the only product. The cyclonucleoside was then protected with tetrahydropyranyl groups and subjected to a similar series of reactions as above to give 2'-O-mesyl-3',5'-di-O-tetrahydropyranylarabinosyladenine (14). The compound 14 was heated with sodium azide after which acidic deprotection afforded 2'-azido-2'-deoxyadenosine (16). Hydrogenation of 16 gave 2'-amino-2'-deoxyadenosine (18). 2'-Chloro-2'-deoxyadenosine (19) was also obtained by treatment of 14 with lithium chloride and subsequent deprotection. UV, IR and NMR spectral data of these compounds are described.     

AcylCo(III) Salen : A new unsymmetrical ketone synthesis

New acyl complexes of N,N'-ethylenebis(salicylideneiminato)cobalt(III) 2 were prepared and their acyl transfer reactions with several nucleophiles were examined. The reaction with MeMgI at room temp gave unsymmetrical ketones of the type MeCOR in reasonably good yields.     

Total synthesis of the sesquiterpene (±)-hirsutene using an organoselenium-mediated cyclization reaction

Cyclization of 2-carbomethoxy-3-(4',4'-dimethylcyclopent-2-enylmethyl)cyclopentanone (4) with N-phenylselenophthalimide and tin(IV) chloride affords cis-syn-cis-1β-carbomethoxy-4,4-dimethyl-3β-phenylselenotricyclo [6.3.0.0^2,6]undecan-11-one (8) and cis-anti-cis-1β-carbomethoxy-4,4-dimethyl-3α-phenylselenotricyclo [6.3.0.0^2,6]undecan-11-one (9). Both of these selenides can be elaborated to cis-anti-cis-4,4-dimethyl-1β-methyltricyclo [6.3.0.0^2,6]undecan-11-one (13) which upon treatment with CH₂Br₂/ TiCl₄/Zn affords the sesquiterpene (±)-hirsutene (1) in 20% overall yield.     

Synthesis and characterization of coordination polymers of a carboxylato cyclophane with metal [Zn(II) and Cd(II)]-2,2′-bipyridines

N,N′,N′′,N′′′-Tetrakis(3-carboxy-propionyl)-1,6,20,25-tetraaza-[6.1.6.1] paracyclophane, H₄cp has been complexed with metal (Zn(II) and Cd(II)) 2,2′-bipyridyls. The resulting complexes of the composition [{Zn(2,2′-bpy)}₂(cp)]_n·4H₂O 1 and [{Cd(2,2′-bpy)}₂(cp)]_n·5H₂O 2 (2,2′-bpy = 2,2′-bipyridine) have been characterized using spectroscopic (IR, solid state UV–Vis), elemental analysis and single-crystal X-ray diffraction measurements. In these complexes the cyclophane coordinates in different modes, and in complex 2, Cd(II) is hepta-coordinated. However, under harsh reaction conditions (using excess nitric acid and a longer reaction time) debranching of the cyclophane is observed in the reaction of Zn(2,2′-bpy)(NO₃)₂ with H₄cp, and a complex of the composition [Zn(2,2′-bpy)(Suc)]_n3 (suc = succinate) is isolated. Using non-covalent interactions, complexes 1 and 2 provide 3D supramolecular structures, whereas an infinite 1D chain structure is observed for complex 3. The thermal and photoluminescence properties of the complexes have also been studied.