Synthesis of Urinary Metabolites of Retinoic Acid

Urinary metabolites 5-methyl-5-[2-(2,6,6-trimethyl -3-oxo-1-cyclohexen-1-yl)-vinyl]-2-tetrahydrofuranone (1) and 5-[2-(6-hydroxymethyl-2, 6-dimethyl-3-oxo-1- cyclohexen-1-yl)vinyl]-5-methyl-2-tetrahydrofuranone (2) of retinoic acid have been synthesized from 4-[2,2,6-trimethyl-3-(tetrahydro-2 H -pyran-2-yl)oxy-1-cyclohexen-1-yl]-3-buten-2-one (4) and methyl 2-(3,3-ethylenedioxy-1-butenyl)-1, 3-dimethyl-4-oxo-2-cyclohexene-1-carboxylate (5) .     

联萘衍生物的磺化反应研究

研究了1-和2-苯基萘, 1, 1'-和2, 2'-联萘, 2, 2-二羟基-, 2, 2'-二甲氧基和-2, 2'-甲基磺酰氧基-1, 1'-联萘等七种萘衍生物和三氧化硫的磺化反应。1-苯基萘和1, 1'-联萘的磺化先发生在4位上, 第二取代位置为6和7位。2-苯基萘和2, 2'-联萘均首先得到8位磺酸取代物, 进一步磺化得到8, 4'-和8, 8'-二磺酸取代物。2, 2'-二甲氧基-1, 1'-联萘以13:87的比例得到3位和6位磺酸取代物。2, 2'-二甲磺酰氧基-1, 1'-联萘以58:42的比例得到5位和6位磺酸取代物。2, 2'-二羟基-1, 1'-联萘的等摩尔磺化得到比例为35:65的5位和6位磺酸取代物, 和大于6摩尔的SO~3反应则以62:38的比例得到5位和6位磺酸取代物。     

Facile Synthesis of Novel Pentofuranose Analogs of Phospha Sugar Derivatives

Novel pentofuranose analogs of phospha sugar derivatives were synthesized starting from 1-phenyl-2-phospholene 1-oxide ( 1 ). First, the allylic oxidation of 1-phenyl-2-phospholene 1-oxide ( 1 ) with CrO 3 in Ac 2 O-AcOH or 3-hydroxy-1-phenyl-2-phospholene ( 2 ) with MnO 2 afforded 1-phenyl-4-oxo-2-phospholene 1-oxide ( 3 ). The C-5 alkylation of 3 in the presence of NaH by using benzyl bromide or methyl iodide as electrophiles afforded the target title compounds.     

Regio - and stereospecific halogenation of 7alogenoalkenes in liquid hydrogen fluoride

The products of bromo and chlorofluorination of E and Z-1,2-dichloroethylenes, 1, 3-dichloro-1-propenes, 1, 1-dichloro- ethylene and 1, 3-dichloro-2-fluoro-1-propene by N-bromosuccinimide and hexachloromelamine in anhydrous hydrogen fluoride have been studied. It was found that the reaction was in all cases 100% regio and 93–100% trans-stereospecific with the exception of E-1, 2-dichloro-ethylene, its trans-stereospecificity being 85%.Threo and erithro-1-bromo-1, 2-dichloro-2-fluoroethanes, 2-bromo-1, 3-dichloro-1-fluoropropanes and 1, 2, 3-trichloro-1-fluoro-propanes as well 1, 1, 2-trichloro-2-fluoroethane, 1-bromo-2, 2-dichloro-2-fluoroethane, 1, 2, 2-trichloro-2 fluoroethane, 1-bromo-1, 3-dichloro-2, 2-difluoropropane, and 1, 1, 3-trichloro-2,2-difluoropropane were obtained in 50–70% yield.The bromination of E and Z-1, 3-dichloro-1-propenes with molecular bromine in carbon tetrachloride in the dark is non-stereospecific and gives a mixture of erithro and threo-1, 2-dibromo-1, 3-dichloropropanes in the ratio about 1:1. However, the bromination reaction in anhydrous hydrogen fluoride solution proceeds with a high degree of stereospecificity (94–95%) and gives threo-1, 2-dibromo-1, 3-dichloropropane from Z and erithro-1, 2-dibromo-1, 3-dichloropropane from E-1, 3-dichloro-1-propene.The data obtained are considered in terms of an electrophilic mechanism of halogenoalkene halogenation in anhydrous hydrogen fluoride and a free-radical mechanism in carbon tetrachloride.     

液相色谱双保留机理动力学过程研究

本文根据质量平衡原理建立了反相色谱双保留机理的质量平衡模型, 导出了色谱流出曲线的一阶矩和二、三阶中心矩, 获得了双保留机理色谱容量因子和塔片高度的表达式. 讨论了各种色谱动力学参数对柱效和峰形的影响, 对改善色谱峰对称度和提高柱效的措施作了理论说明。     

Oligomers as initiators of free radical polymerization

Methyl methacrylate, benzyl methacrylate, butyl methacrylate, and methacrylic acid can be polymerized by 1, 2, 2-tetraphenyl-1, 2-diphenoxyethane (TPPA), 1, 1, 2, 2-tetraphenyl-1, 2-bis-(trimethylsiloxy) ethane (TPSA), and 1, 1, 2, 2-tetraphenyl-1, 2-dicyanoethane (TPCA) (1–3). The polymerization with these initiators is characterized by three steps; in the first period oligomers from MMA and initiator radicals are formed by primary radical termination.     

中心为氨基、末端为硝基的苯乙炔树枝状分子的合成

将固定相合成与“收敛/发散”方法相结合,合成了第一、二代苯乙炔树枝状分子.通过Heck-Cassar-Sonogashira-Hagihara偶联反应,将其中心和末端分别修饰上供电子的氨基和拉电子的硝基,得到第一、二代中心为氨基、末端为硝基的苯乙炔树枝状分子NH₂-G1-(NO₂)₂和NH₂-G2-(NO₂)₄.用傅里叶变换红外光谱跟踪了整个固定相合成过程.苯乙炔树枝状分子的紫外-可见吸收光谱呈现出规律性变化.     

Chloromethylation of substituted di(2-thienyl)methanes and the reductive desulfuration of some diamines of the thiopene series

The action of chloromethyl ether on di(2-thienyl)methane, 1, 1-di-(2-thienyl)ethane, 2, 2-di(2-thienyl)propane, 2, 5-bis(dimethyl-2-thienylmethyl)thiophene, and 1, 1, 1-tri(2-thienyl)ethane has given, respectively: 5-chloromethyl -2 -thienylthiophene, 1, 1-bis(5-chloro-methyl-2-thienyl)ethane, 2, 2-bis(5-chloromethyl-2-thienyl)propane, 2, 5-bis(dimethyl-5-chloromethyl-2-thienylmethyl)thiophene, 1-(2-thienyl)-1, 1-bis(5-chloromethyl-2-thienyl)-ethane, and the corresponding amines: 5-diethylaminomethyl-2-thienylthiophene, 1,1-Bis(5-diethylaminomethyl-2-thienyl)ethane, 2, 2-bis(5-aminomethyl-2 -thienyl)propane, 2, 2-bis(5-methylaminomethyl-2-thienyl)propane, 2, 5-bis(dimethyl-5-dimethylaminomethyl-2-thienylmethyl)thiophene, and 2, 8, 8, 14, 20, 20-hexamethyl-2, 14-diaza-3, 2, 3, 2-α-cyclotetrathiene. The reductive desulfonation over Raney nickel of the diacetyl derivatives of 2, 2-bis(5-aminomethyl-2-thienyl)propane and 2, 2-bis(5-methylaminomethyl-2-thienyl)propane has given the diacetyl derivatives of aliphatic amines.     

Relative Contributions of Diabatic and Adiabatic Channels to Photoisomerization and Photocyclization of Diarylethylenes

Relative contributions of diabatic and adiabatic channels to photoisomerization and photocyclization processes were measured for stilbene, 1-phenyl-2-(2-naphthyl)ethylene (Ph-2N), 1,2-di-(1-naphthyl)ethylene (1N-1N), 1-(1-naphthyl)-2-(2-naphthyl)ethylene (1N-2N), and 1,2-di-(2-naphthyl)ethylene (2N-2N) by the steady-state spectrophotometric method in solutions at room temperature. The effects of solvent nature and atmospheric oxygen on the quantum yields of these processes in 1N-1N and 2N-2N were studied.     

Li~3Al的几何结构和垂直激发态光谱的量子化学研究

在ab initio DZP水平上, 用能量梯度法对Li~3Al的三种几何构型进行了优化, 并对其中两个能量较低的构型用单、双激发组态相互作用(CISD)进行了垂直跃迁能和振子强度计算, 结果表明: Li~3Al(C~2~v)中存在着三个强度较大的跃迁, 分别是从基态跃迁到1^1B~1, 2^1B~1, 5^1A~1态。Li~3Al(D~3~h)中存在着四个强度较大的跃迁, 分别是从基态跃迁到1^1B~2, 2^1A~1, 3^1B~2, 3^1A~1态。这些强度较大的跃迁均为粒子穴跃迁。     

Further examples of the failure of surrogates to properly model the structural and hydrothermal chemistry of transuranium elements: insights provided by uranium and neptunium diphosphonates

In situ hydrothermal reduction of Np(VI) to Np(IV) in the presence of methylenediphosphonic acid (C1P2) results in the crystallization of Np[CH2(PO3)2](H2O)2 (NpC1P2-1). Similar reactions have been explored with U(VI) resulting in the isolation of the U(IV) diphosphonate U[CH2(PO3)2](H2O) (UC1P2-1), and the two U(VI) diphosphonates (UO2)2[CH2(PO3)2](H2O)3.H2O (UC1P2-2) and UO2[CH2(PO3H)2](H2O) (UC1P2-3). Single crystal diffraction studies of NpC1P2-1 reveal that it consists of eight-coordinate Np(IV) bound by diphosphonate anions and two coordinating water molecules to create a polar three-dimensional framework structure wherein the water molecules reside in channels. The structure of UC1P2-1 is similar to that of NpC1P2-1 in that it also adopts a three-dimensional structure. However, the U(IV) centers are seven-coordinate with only a single bound water molecule. UC1P2-2 and UC1P2-3 both contain U(VI). Nevertheless, their structures are quite distinct with UC1P2-2 being composed of corrugated layers containing UO 6 and UO 7 units bridged by C1P2; whereas, UC1P2-3 is found as a polar three-dimensional network structure containing only pentagonal bipyramidal U(VI). Fluorescence measurements on UC1P2-2 and UC1P2-3 exhibit emission from the uranyl moieties with classical vibronic fine-structure.     

Li3Al和Li2B2的稳定性和垂直激发态光谱

对于较大的簇合物，电子衍射技术或许能得到有用的信息[1].而小簇合物Mn（3≤n《50）的几何结构就没有标准的方法加以测定．对于二聚体和三聚体[2-5]，振动光谱和转动光谱能够得到精确的核间距和基态的势能面．当n》4时，若要得到一个有价值的结果，需要进行很复杂的振动结构分析．对于这类小簇合物只能得到它们的吸收光谱[6-7].因此，计算其垂直激发态就具有非常重要的意义．用量子化学解释簇合物的吸收光谱已成为一个非常诱人的课题[8].从头算对碱金属簇合物的垂直激发态计算，并与实验光谱进行比较，已成功地预测了一些碱金属簇合物的基…     

Rh—V／SiO2上H2的化学吸附方式

ＣＯ加氢反应机理是许多研究者感兴趣的课题．负载的Ｒｈ是ＣＯ加氢反应的优良催化剂．ＣＯ在Ｒｈ上吸附态的研究已有许多报道［１～７］,而对Ｈ２有关的吸附态的研究却少见报道．Ｗｏｒｌｅｙ等［８］利用高压超纯Ｈ２在２．２％Ｒｈ／Ａｌ２Ｏ３膜上首次观测到Ｒｈ—Ｈ...     

Bimetallic effects in homopolymerization of styrene and copolymerization of ethylene and styrenic comonomers: scope, kinetics, and mechanism

This contribution describes the homopolymerization of styrene and the copolymerization of ethylene and styrenic comonomers mediated by the single-site bimetallic "constrained geometry catalysts" (CGCs), (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 [EBICGC(TiMe2)2; Ti2], (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](ZrMe2)}2 [EBICGC(ZrMe2)2; Zr2], (mu-CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 [MBICGC(TiMe2)2; C1-Ti2], and (mu-CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](ZrMe2)}2 [MBICGC(ZrMe2)2; C1-Zr2], in combination with the borate activator/cocatalyst Ph3C+ B(C6F5)4- (B1). Under identical styrene homopolymerization conditions, C1-Ti2 + B1 and Ti2 + B1 exhibit approximately 65 and approximately 35 times greater polymerization activities, respectively, than does monometallic [1-Me2Si(3-ethylindenyl)(tBuN)]TiMe2 (Ti1) + B1. C1-Zr2 + B1 and Zr2 + B1 exhibit approximately 8 and approximately 4 times greater polymerization activities, respectively, than does the monometallic control [1-Me2Si(3-ethylindenyl)(tBuN)]ZrMe2 (Zr1) + B1. NMR analyses show that the bimetallic catalysts suppress the regiochemical insertion selectivity exhibited by the monometallic analogues. In ethylene copolymerization, Ti2 + B1 enchains 15.4% more styrene (B), 28.9% more 4-methylstyrene (C), 45.4% more 4-fluorostyrene (D), 41.2% more 4-chlorostyrene (E), and 31.0% more 4-bromostyrene (F) than does Ti1 + B1. This observed bimetallic chemoselectivity effect follows the same general trend as the pi-electron density on the styrenic ipso carbon (D > E > F > C > B). Kinetic studies reveal that both Ti2 + B1 and Ti1 + B1-mediated ethylene-styrene copolymerizations follow second-order Markovian statistics and tend to be alternating. Moreover, calculated reactivity ratios indicate that Ti2 + B1 favors styrene insertion more than does Ti1 + B1. All the organozirconium complexes (C1-Zr2, Zr2, and Zr1) are found to be incompetent for ethylene-styrene copolymerization, yielding only mixtures of polyethylene and polystyrene. Model compound (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)][Ti(CH2Ph)2]}2 {EBICGC[Ti(CH2Ph)2]2; Ti2(CH2Ph)4} was designed, synthesized, and structurally characterized. In situ activation studies with cocatalyst B(C6F5)3 suggest an eta(1)-coordination mode for the benzyl groups, thus supporting the proposed polymerization mechanism. For ethylene-styrene copolymerization, polar solvents are found to increase copolymerization activities and coproduce atactic polystyrene impurities in addition to ethylene-co-styrene, without diminishing the comonomer incorporation selectivity. Both homopolymerization and copolymerization results argue that substantial cooperative effects between catalytic sites are operative.     

Hypohalite ion catalysis of the disproportionation of chlorine dioxide

The disproportionation of chlorine dioxide in basic solution to give ClO2- and ClO3- is catalyzed by OBr- and OCl-. The reactions have a first-order dependence in both [ClO2] and [OX-] (X = Br, Cl) when the ClO2- concentrations are low. However, the reactions become second-order in [ClO2] with the addition of excess ClO2-, and the observed rates become inversely proportional to [ClO2-]. In the proposed mechanisms, electron transfer from OX- to ClO2(k1OBr- = 2.05 +/- 0.03 M(-1) x s(-1) for OBr(-)/ClO2 and k1OCl-= 0.91 +/- 0.04 M(-1) x s(-1) for OCl-/ClO2) occurs in the first step to give OX and ClO2-. This reversible step (k1OBr-/k(-1)OBr = 1.3 x 10(-7) for OBr-/ClO2, / = 5.1 x 10(-10) for OCl-/ClO2) accounts for the observed suppression by ClO2-. The second step is the reaction between two free radicals (XO and ClO2) to form XOClO2. These rate constants are = 1.0 x 10(8) M(-1) x s(-1) for OBr/ClO2 and = 7 x 10(9) M(-1) x s(-1) for OCl/ClO2. The XOClO2 adduct hydrolyzes rapidly in the basic solution to give ClO3- and to regenerate OX-. The activation parameters for the first step are DeltaH1(++) = 55 +/- 1 kJ x mol(-1), DeltaS1(++) = - 49 +/- 2 J x mol(-1) x K(-1) for the OBr-/ClO2 reaction and DeltaH1(++) = 61 +/- 3 kJ x mol(-1), DeltaS1(++) = - 43 +/- 2 J x mol(-1) x K(-1) for the OCl-/ClO2 reaction.     

Chloromethylation of substituted di(2-thienyl)methanes and the reductive desulfuration of some diamines of the thiopene series

The action of chloromethyl ether on di(2-thienyl)methane, 1, 1-di-(2-thienyl)ethane, 2, 2-di(2-thienyl)propane, 2, 5-bis(dimethyl-2-thienylmethyl)thiophene, and 1, 1, 1-tri(2-thienyl)ethane has given, respectively: 5-chloromethyl -2 -thienylthiophene, 1, 1-bis(5-chloro-methyl-2-thienyl)ethane, 2, 2-bis(5-chloromethyl-2-thienyl)propane, 2, 5-bis(dimethyl-5-chloromethyl-2-thienylmethyl)thiophene, 1-(2-thienyl)-1, 1-bis(5-chloromethyl-2-thienyl)-ethane, and the corresponding amines: 5-diethylaminomethyl-2-thienylthiophene, 1,1-Bis(5-diethylaminomethyl-2-thienyl)ethane, 2, 2-bis(5-aminomethyl-2 -thienyl)propane, 2, 2-bis(5-methylaminomethyl-2-thienyl)propane, 2, 5-bis(dimethyl-5-dimethylaminomethyl-2-thienylmethyl)thiophene, and 2, 8, 8, 14, 20, 20-hexamethyl-2, 14-diaza-3, 2, 3, 2--cyclotetrathiene. The reductive desulfonation over Raney nickel of the diacetyl derivatives of 2, 2-bis(5-aminomethyl-2-thienyl)propane and 2, 2-bis(5-methylaminomethyl-2-thienyl)propane has given the diacetyl derivatives of aliphatic amines.     

A combined ab initio/Franck-Condon study of the A-X single-vibronic-level emission spectrum of CCl2 and the photodetachment spectrum of CCl2 -.

State-of-the-art ab initio calculations have been carried out on the X1A1, ?3B1 and A1B1 states of CCl2 and the X2B1 state of CCl2-. Franck-Condon factors including anharmonicity have been calculated, between the CCl2 states, and between the CCl2- X2B1 state and the CCl2 states. They are used to simulate the A-X single-vibronic-level (SVL) emission spectra of CCl2 determined by M.-L. Lui et al. [PCCP 2003, 5, 352] and the 364 nm laser photodetachment spectrum of CCl2- obtained by R. L. Schwartz et al. [J. Phys. Chem. A 1999, 103, 8213]. Comparison between simulated and observed spectra confirms the vibrational assignments of the X2B1 SVL emission spectra and the T0 position of the A1B1 state of CCl2. For the photodetachment spectrum of CCl2-, spectral simulation shows that the higher binding energy ?3B1(CCl2) <-- X2B1(CCl2-) band is well separated from the X1A1(CCl2) <-- X2B1(CCl2-) band. It is concluded that the observed second band, which overlaps heavily with the X1A1(CCl2) <-- X2B1(CCl2-) band in the photodetachment spectrum of CCl2- cannot be assigned to the CCl2(?3B1) + e --> CCl2-(X2B1) detachment process. Further ab initio calculations carried out in the present investigation support the suggestion that the second band in the 364 nm photodetachment spectrum of CCl2- is due to detachment from an excited state of CCl2-, a linear quartet state, to a triplet state of CCl2. These calculations identify the anionic state to be the lowest 4Sigmag- (4Sigma-) state, which photodetaches vertically to the 3Sigmag- (3Sigma-; adiabatically ?3B1) and/or 3Pi(u) (3Pi) states of CCl2 to give the second band observed in the 364 nm photodetachment spectrum of CCl2-.     

Synthesis of deuterium-labeled derivatives of dimethylallyl diphosphate

Short practical syntheses for five deuterium-labeled derivatives of dimethylallyl diphosphate (DMAPP) useful for enzymological studies are reported. These include the preparation of the C1-labeled derivatives (R)-[1-2H]3-methylbut-2-enyl diphosphate ((R)-[1-2H]1-OPP) and (S)-[1-2H]3-methylbut-2-enyl diphosphate ((S)-[1-2H]1-OPP), the C2-labeled derivative [2-2H]3-methylbut-2-enyl diphosphate ([2-2H]1-OPP), and the methyl-labeled derivatives (E)-[4,4,4-2H3]3-methylbut-2-enyl diphosphate ((E)-[4,4,4-2H3]1-OPP) and (Z)-[4,4,4-2H3]3-methyl-but-2-enyl diphosphate ((Z)-[4,4,4-2H3]1-OPP).     

Synthesis and structural characterization of mono- and bisfunctional o-carboranes

Functionalized o-carboranes are interesting ligands for transition metals. Reaction of LiC2B10H11 with Me2NCH2CH2Cl in toluene afforded 1-Me2NCH2CH2-1,2-C2B10H11 (1). Treatment of 1 with 1 equiv. of n-BuLi gave [(Me2NCH2CH2)C2B10H10]Li ([1]Li), which was a very useful synthon for the production of bisfunctional o-carboranes. Reaction of [1]Li with RCH2CH2Cl afforded 1-Me2NCH2CH2-2-RCH2CH2-1,2-C2B10H10 (R = Me2N (2), MeO (3)). 1 and 2 were also prepared from the reaction of Li2C2B10H10 with excess Me2NCH2CH2Cl. Treatment of [1]Li with excess MeI or allyl bromide gave the ionic salts, [1-Me3NCH2CH2-2-Me-1,2-C2B10H10][I] (4) and [1-Me2N(CH2=CHCH2)CH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10][Br] (6), respectively. Interaction of [1]Li with 1 equiv. of allyl bromide afforded 1-Me2NCH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10 (5). Treatment of [1]Li with excess dimethylfulvene afforded 1-Me2NCH2CH2-2-C5H5CMe2-1,2-C2B10H10 (7). Interaction of [1]Li with excess ethylene oxide afforded an unexpected product 1-HOCH2CH2-2-(CH2=CH)-1,2-C2B10H10 (8). 1 and 3 were conveniently converted into the corresponding deborated compounds, 7-Me2NHCH2CH2-7,8-C2B9H11 (9) and 7-Me2NHCH2CH2-8-MeOCH2CH2-7,8-C2B9H10 (10), respectively, in MeOH-MeOK solution. All of these compounds were characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of 4 and 6-10 were confirmed by single-crystal X-ray analyses.     

Syntheses and characterization of mu,eta(1),eta(1)-3,5-di-tert-butylpyrazolato derivatives of aluminum

The 3,5-di-tert-butylpyrazolato (3,5-tBu(2)pz) derivatives of aluminum [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)R(1)R(2)](2) (R(1) = R(2) = Me 1; R(1) = R(2) = Et, 2; R(1) = R(2) = Cl, 3; R(1) = R(2) = I, 4; [(eta(2)-3,5-tBu(2)pz)(3)Al], 5; [Al(2)(eta(1),eta(1)-3,5-tBu(2)pz)(2)(mu-E)(C triple bond CPh)(2)] (E = S (6), Se (7), Te (8)) have been prepared in good yield. Compounds 1 and 2 were obtained by the reactions of H[3,5-tBu(2)pz] with Me(3)Al and Et(3)Al, respectively. Reaction of [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)H(2)](2) with the pyrazole H[3,5-tBu(2)pz] gave [(eta(2)-3,5-tBu(2)pz)(3)Al] (5). The reaction of [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)R(2)](2) (R = H, Me) and I(2) yielded 4, while the reaction of 1 equiv of K[3,5-tBu(2)pz] and AlCl(3) afforded 3. In addition, the reaction of [Al(2)(eta(1),eta(1)-3,5-tBu(2)pz)(2)(mu-E)H(2)] and HC triple bond CPh gave 6, 7, and 8. All compounds have been characterized by elemental analysis, NMR, and mass spectroscopy. The molecular structure analyses of compounds 1, 3, 6, and 7 by X-ray crystallography showed that complexes 1 and 3 are dimeric with two eta(1),eta(1)-pyrazolato groups in twisted conformation while 6 and 7 with two eta(1),eta(1)-pyrazolato groups display a boat conformation.