A 1H NMR study of 1,4-bis(N-hexadecyl-N, N-dimethylammonium)butane dibromide/sodium anthranilate system: spherical to rod-shaped transition

The effect of addition of sodium anthranilate to 5 mM micellar solutions of gemini surfactant 1,4-bis(N-hexadecyl-N,N-dimethylammonium)butane dibromide is investigated by ¹H NMR. The solubilization site of anthranilate anion near the micellar surface is inferred. In the micelles, the An⁻ ions intercalate among the surfactant headgroups producing morphological changes.     

Solute partition study in aqueous sodium dodecyl sulfate micellar solutions for some organic reagents and metal chelates

The partition constants (K _d) have been estimated for nitrophenols, thiazolylazo dyestuffs and metal chelate compounds into the sodium dodecyl sulfate (SDS) micellar phase at an ionic strength of 0.10M [(H⁺, Na⁺)Cl^–] and at 20 °C. The equilibrium partition data obtained by batch-wise solution spectrophotometry (equilibrium shift method) agree well with those by the micellar electrokinetic capillary chromatography (MECC) with the SDS micellar pseudo-stationary phase. The MECC clearly discriminates a very small difference (0.03) in the logK _d values of some metal chelates. The plot of theK _d values with the van der Waals volume of the solute molecules obviously shows the leveling-off of theK _d values over solute size near 110 ml/mol, which seems to be consistent with the results obtained in the Triton X-100 micellar system. This phenomenon arises most probably from the rigidity of the micellar pseudo-phase (a micellar volume-constraint effect) in sharp contrast with true two-phase partitioning such as solvent extraction systems.     

Study of the reaction Fe(CN)4(bpy)2− + S2O82− in Sulfobetaine Aqueous Micellar Solutions

The reaction Fe(CN)₄(bpy)^2? + S₂O₈^2? has been studied in aqueous micellar solutions of N‐tetradecyl‐N,N‐dimethyl‐3‐ammonio‐1‐propanesulfonate, SB3‐14. The influence of changes in the surfactant concentration as well as in the peroxodisulfate ions concentration on k_obs was investigated. Spectroscopic and conductivity measurements have given information about the distribution of both anionic reagents between the aqueous and micellar pseudophases of the SB3‐14 micellar solutions. A discussion about the adequacy of various equations based on the pseudophase model to rationalize kinetic micellar effects for anion‐anion reactions in sulfobetaine micellar solutions has been done. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 225–231, 2001     

NMR study on solubility of benzyl alcohol and its transfer free energy from D_2O to cationic micelle

A new kind of surfactant, [CnH_(2n+1)OCH2CH(OH)CH2N(CH3)3]Cl (n=12, 14, 16) was synthesized. The solubility of benzyl alcohol in micellar solutions was determined by 1H NMR method. The results indicate that the length of alkyl chains of surfactant affects the solubility of ben-zyl alcohol in 2.5 × l0~(-2) mol/L micellar solutions. The solubility of benzyl alcohol per liter of micellar solution is 0.095 mole for n=12, 0.115 mole for n=14, 0.165 mole for n=16. The transfer free energy of benzyl alcohol from aqueous phase to micellar phase is -24.29 kJ/mol for n=12, -24.37 kJ/mol for n=14, -24.49 kJ/mol for n=16.     

Kinetics of basic hydrolysis of tris(1,10‐phenanthroline)iron(II) in macromolecular assemblies of CTAB

The kinetics of basic hydrolysis of tris(1,10‐phenanthroline)iron(II) has been carried out in aqueous, N‐cetyl‐N,N,N‐trimethyl ammonium bromide (CTAB) micellar, and CTAB reverse micellar media by UV–visible spectroscopy system. The reaction follows the overall second‐order kinetics; first order in each Fe(II) complex and the base (^?OH). CTAB micelles catalyze the reaction rate through the adsorption of the Fe(II) complex and the hydroxyl ions on the micellar surface. In the reverse micellar medium, interesting physicochemical features are observed. Being ionic nature of reactants, both the reactants prefer to stay and react inside the water pool in place of the hydrophobic environment. The rate increases with w, that is, the size of the water pool, attains a maximum value at w = 8.33, and then decreases. But the rate increases as the concentration of surfactant increases at fixed w values. For a better explanation of the kinetic data, the activation parameters, standard enthalpy of activation (Δ^?H°), standard entropy of activation (Δ^?S°), and energy of activation (E_a) were determined. All kinetic data corroborate the proposed mechanism. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 579–589, 2011     

A Volumetric Study of Water–Decyltrimethylanimonium Bromide–Pentanol Ternary System from 25 to 130°C at 2 and 19 MPa

Density measurements on decyltrimethylammonium bromide (DeTAB)–water and pentanol (PentOH)–DeTAB–water systems as functions of both alcohol and surfactant m _S concentrations were carried out at 2 and 19 MPa from 25 to 130°C. From experimental data for the water–DeTAB binary system, the standard (infinite dilution) partial molar volumes, expansibilities, and compressibilities of DeTAB, and the corresponding properties in the micellar phase are calculated. The trends of the standard partial molar volumes of PentOH V _R ^o in DeTAB micellar solutions as functions of m _S reflect the transfer of PentOH from the aqueous to the micellar phase, except at 130°C and 19 MPa. On the basis of an equation previously used, the distribution constant of PentOH between the aqueous and the micellar phases and the standard partial molar volume of alcohol in the aqueous and the micellar phases are obtained from V _R ^o data. Comparisons with data for PentOH in dodecyltrimethylammonium bromide are made.     

TIME-RESOLVED SPECTROSCOPIC STUDIES ON PHOTOPHYSICAL PROPERTIES OF BENOXAPROFEN IN MICELLAR SOLUTIONS: AN INTRAMICELLAR FLUORESCENCE QUENCHING

The micellar dependencies of the photophysical properties of benoxaprofen (BXP), a 2-phenyl benzoxazole derivative, have been investigated using fluorescence spectroscopy and laser flash photolysis techniques. The fluorescence of BXP in aqueous solution has been observed to be remarkably quenched upon addition of a surfactant, cetyltrimethyl ammonium bromide (CTAB) or Triton X-100, in contrast to its enhancement in sodium dodecyl sulfate (SDS) micellar solution. Time-resolved fluorescence measurements show that the fluorescence decays biexponentially in the micellar solution, indicating the relaxation of micellar environments surrounding the excited BXP. The major component of fluorescence lifetimes in CTAB or Triton X-100 micellar phase is even shorter (330–427ps) than in SDS micellar phase (731 ps). The nonradiative decay constants are significantly larger (ca 3.0 times 10⁹ s^?1) in the CTAB or Triton X-100 micellar phase than in SDS micelles by a factor of ca 10. The major nonradiative decay is interpreted to be the internal conversion due to nuclear geometric change of BXP in the first excited singlet state. This is consistent with the observation that the quantum yields of intersystem crossing are very low (less than 0.01) in the micellar solutions as determined by the laser flash photolysis technique. The laser-induced transient absorption spectrum of BXP in CTAB or Triton X-100 micellar solution shows that the decay kinetics of the transients in CTAB or Triton X-100 are significantly different from first order kinetics in SDS.     

Spectroelectrochemical and spectrophotochemical properties of N-tetradecyl-N '-ethyl-viologen: Micellar effects

The results of Spectroelectrochemical studies in homogenous solutions have shown that below the cmc value the cation radical of N-tetradecyl-N '-ethyl viologen (TDEV) dimerizes. The TDEV and tetradecyltriethyl-ammonium bromide (TDEA) micelles were found to stabilize the cation radical TDEV^.+ and increase the rate constant for the reaction TDEV+TDEV²⁺ = TDEV^.+ as compared with the results obtained at concentrations below cmc.Based on the spectrophotochemical measurements for TDEV it was found that the quantum yield (Φ) of photoreduction in micellar evironment of TDEA was twice as large as Φ for reactions performed in homogenous solution. Moreover, in micellar solutions photoreduction of TDEV leads to a cation radical of reduced TDEV (TDEV⁺), but in homogenous solution to the dimer of TDEV [TDEV]₂. Therefore, the process of dimerization of TDEV^.+ cation radical is inhibited by micellar catalysis.     

Micelles as Containers for Self‐Assembled Nanodevices: A Fluorescent Sensor for Lipophilicity

Potentiometric titrations, fluorescence versus pH titrations, dynamic light scattering and fluorescence polarization anisotropy studies demonstrate that inside the nanodimensioned Triton X‐100 micelles, 1‐pyrenecarboxylic acid, PCOO^?, forms an apical complex with the Zn²⁺ cation encircled by a lipophilic cyclen ligand and hugely increasing its fluorescence. The ability of the Zn²⁺‐cyclen‐PCOO^? complex plus its micellar container to act as a fluorescent sensor to evaluate the lipophilicity of molecular species is demonstrated on the fatty acid series CH₃(CH₂)_xCOOH (x=0–16). At pH 7.4 a decrease in fluorescence is observed on the addition of fatty acids that is directly related to their chain length, that is, to their tendency to enter the micellar containers, where they dislocate PCOO^? from the Zn²⁺ centre. The independent determination of fatty acid pK_a values in the presence of Triton X‐100 micelles confirms that our fluorescent micellar device is capable of sensing their lipophilicity.     

直链醇对反胶束体系中木素过氧化物酶催化活性的影响

根据研究发现, 在有醇作助表面活性剂的CTAB反胶束中木素过氧化物酶(LiP)不能表现活力, 而在水介质中CTAB对LiP的催化活性影响又不是很大. 为了揭示其中醇的影响, 本工作就不同碳链长度的醇对LiP酶催化性能的影响进行了研究. 由于CTAB反胶束体系中醇浓度较高, 且碳原子数大于4的直链醇在水中的溶解度又很小, 为此采用了LiP可在其中显示催化活性的CTAB正胶束、AOT反胶束和Brij30反胶束作介质, 通过研究这些介质中不同链长的醇对LiP催化活力的影响, 来探讨CTAB反胶束中木素过氧化物酶(LiP)不能表现活力的原因. 结果表明, 不管表面活性剂聚集体的结构、电性质及反胶束大小如何, 只要醇的浓度超过500 mmol•L^－1 (丁醇≥1200 mmol•L^－1), LiP在上述原本可显示活力的介质中均无催化活性. 据此推测CTAB反胶束中木素过氧化物酶(LiP)不能表现活力的原因主要是由助表面活性剂醇造成的.     

Effect of pH on kinetics of the decay of the radicals formed during photolysis of 2,2,4,6-tetramethyl-1,2-dihydroquinoline in aqueous and micellar solutions

Kinetics of the decay of the transient radicals formed from 2,2,4,6-tetramethyl-1,2-dihydroquinoline (TMQ) in aqueous and micellar solutions of sodium dodecyl sulfate were studied by flash photolysis as a function of pH. In aqueous and micellar solutions of TMQ the mechanism of the decay of the transient species and the reaction products are different from those in homogeneous organic solutions. The decay of the transient radicals follows first-order kinetics in the entire range of pH under consideration in both aqueous and micellar solutions. In aqueous solutions at pH 9–12, the decay rate constant decreases from 25.3 to 3.7 s⁻¹. In micellar solutions at different pH, different types of micellar catalysis were observed. At pH 1, the rate constant in a micellar solution is slightly lower than that in an aqueous solution. At pH 3–11, the decay rate constant increases (positive micellar catalysis). The apparent rate constant depends linearly on the concentration of TMQ in micelles. The rate constant for the reaction of the transient radical cation with TMQ was determined (200 L mol⁻¹ s⁻¹). At pH>13, the decay rate constant in micelar solutions is lower than that in aqueous solutions (negative micellar catalysis). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 703–708, April, 1997.     

Kinetics and mechanism of intramolecular general base-catalyzed alkanolysis of phenyl salicylate in the presence of anionic micelles

The alkanolysis of ionized phenyl salicylate, PS^?, has been studied in the presence and absence of micelles of sodium dodecyl sulphate, SDS, at 0.05 M NaOH, 30 or 32°C and within the alkanol, ROH, (ROH = HOCH₂CH₂OH and CH₃OH) contents of 15–74 or 92%, v/v. The alkanolysis of PS^? involves intramolecular general base catalysis. At a constant concentration of SDS, [SDS]_T, the observed pseudo first-order rate constants, k_obs, for the reactions of ROH with PS^? obtained at different concentration of ROH, [ROH]_T, obey the relationship: k_obs = k[ROH]_T/(1 + K_A[ROH]_T) where k is the apparent second-order rate constant and K_A is the association constant for dimerization of ROH molecules. Both k and K_A decrease with increase in [SDS]_T. At a constant [ROH]_T, the rate constants, k_obs, show a decrease of nearly 2-fold with increase in [SDS]_T from 0.0–0.3M. These results are explained in terms of pseudo-phase model of micelle. The rate constants for alkanolysis of PS^? in micellar pseudophase are insignificant compared with the corresponding rate constants in aqueous-alkanol pseudophase. This is attributed largely to considerably low value of [ROH] in the specific micellar environment where micellar bound PS^? molecules exist. The increase in [ROH]_T decrease the value of the binding constant of PS^? with SDS micelle. The effects of anionic micelles on the rates of alkanolysis of PS^? are explained in terms of the porous cluster micellar structure.     

Volumes and compressibilities of pentanol in aqueous alkyltrimethylammonium bromide solutions at different temperatures

Speed of sound and density properties of ternary water-tetradecyltrimethylammonium bromide-pentanol system at 15, 25 and 35°C and of water-hexadecyltrimethylammonium bromide-pentanol system at 25, 35 and 45°C were measured at fixed alcohol concentration as a function of surfactant concentration. The apparent molar volumes V_,R and isentropic compressibilities K _,R ^S of pentanol in micellar solutions as a function of the surfactant concentration show irregular behavior which depends on the alkyl chain length of the surfactant and tends to disappear with increasing temperature. These anomalies are ascribed to micellar transitions. For both surfactants at high concentrations, V_,R decrease and the magnitude of the change seems to depend on the type of densimeter used. This observation is tentatively explained in terms of a correlation between the micellar structure and features of the densimeter. From this work and literature data, the apparent molar isothermal compressibilities K _,R ^T of the alcohol in micellar solutions were calculated at 25°C. V_,R , K _,R ^S and K _,R ^T are interpreted in terms of the distribution constant of the alcohol between the aqueous and the micellar phases and of the apparent molar property of the alcohol in the micellar and the aqueous phases. For a given surfactant increasing the temperature increases V_,R and K _,R ^S in the micellar phase while the distribution constant is weakly dependent. At a given temperature, an increase in the alkyl chain length of the surfactant increases the apparent molar volume and slightly changes the apparent molar compressibility of the alcohol in the micellar phase.     

Kinetics and mechanism of the picolinic acid catalysed chromium(VI) oxidation of ethane-1,2-diol in the presence and absence of surfactants

The kinetics and mechanism of the Cr^VI oxidation of ethane-1,2-diol in the presence and absence of picolinic acid (PA) in aqueous acid media have been carried out under the conditions: [ethane-1,2-diol]_T [Cr^VI]_T and [PA]_T [Cr^VI]_T at different temperatures. The micellar effect on the title reactions has been studied in order to substantiate the suggested mechanism. Under the experimental conditions, ethane-1,2-diol is predominantly oxidised to hydroxyethanal and the kinetic contribution from the glycol splitting path is negligible. In the absence of PA, the simple alcohol oxidation mechanism, involving one —OH group, operates. In the PA-catalysed path, a Cr^VI–PA cyclic complex has been proposed as the active oxidant. In the PA-catalysed path, the Cr^VI–PA complex is the subject of nucleophilic attack by the substrate to form a ternary complex which subsequently experiences a redox decomposition (through 2e transfer) leading to hydroxyethanal and the Cr^IV–PA complex. The Cr^IV–PA complex then participates further in the oxidation of organic substrate and ultimately is converted into the inert Cr^III–PA complex. It is striking to note that the uncatalysed path shows a second-order dependence on [H⁺], while the PA-catalysed path shows a zeroth-order dependence on [H⁺]. Both the uncatalysed and PA-catalysed paths show first-order dependence on [ethane-1,2-diol]_T and on [Cr^VI]_T. The PA-catalysed path is first-order in [PA]_T. All these observations (i.e. dependence patterns on the reactants) remain unaltered in the presence of externally added surfactants. The effect of the cationic surfactant (i.e. cetylpyridinium chloride, CPC) and anionic surfactant (i.e. sodium dodecyl sulfate, SDS) has been studied both in the presence and absence of PA. CPC acts as an inhibitor and restricts the reaction to aqueous phase, while SDS acts as a catalyst and the reactions proceed simultaneously in both aqueous and micellar phase, with an enhanced rate in the micellar phase. The observed micellar effects have been explained by considering the preferential partitioning of the reactants between the micellar and aqueous phase. The applicability of different kinetic models, e.g. the Menger–Portnoy model, Piszkiewicz cooperative model, pseudo-phase ion exchange (PIE) model, has been tested to explain the observed micellar effects.     

Micellar effects upon the reaction of hydroxide ion with 2-phenoxyquinoxaline

Cationic micelles of alkyltrimethylammonium chloride and bromide (alkyl = n? C₁₂H₂₅, n? C₁₄H₂₉, and n? C₁₆H₃₃) catalyze and anionic micelles of sodium dodecyl sulfate inhibit the reaction of hydroxide ion with 2-phenoxyquinoxaline (1). Inert anions such as chloride, nitrate, mesylate, and n-butanosulfonate inhibit the reaction in CTABr by competing with OH^? at the micellar surface. The overall micellar effects on rate in cationic micelles and dilute electrolyte can be treated quantitatively in terms of the pseudo-phase ion-exchange model. The determined second-order rate constants in the micellar pseudo-phase are smaller than the second-order constants in water. © 1994 John Wiley & Sons, Inc.     

Effect of a Weak Electrolyte on the Critical Micellar Concentration of Sodium Dodecyl Sulfate

The critical micellar concentration of sodium dodecyl sulfate is strongly altered bytris(hydroxy-methyl)methylammonium ions. The effect of buffer solutions containing this weak electrolyte as the counterion source has been studied using various concentrations of the acid–base system as well as modifying the pH. Results show that counterion concentrations ranging from 0 to 340 × 10⁻³M induce an appreciable diminution of the critical micellar concentration from 8 to 0.7 × 10⁻³M. The analysis of data suggests that the critical micellar concentration of sodium dodecyl sulfate depends on the concentration of weak electrolytes in a way very similar to that of strong electrolytes.     

Study of the bromide oxidation by bromate in zwitterionic micellar solutions

The redox reaction Br⁻ + BrO₃⁻ has been studied in aqueous zwitterionic micellar solutions of N‐tetradecyl‐N, N‐dimethyl‐3‐ammonio‐1‐propanesulfonate, SB3‐14, and N‐hexadecyl‐N,N‐dimethyl‐3‐ammonio‐1‐propanesulfonate, SB3‐16. A simple expression for the observed rate constant, k_obs, based on the pseudophase model, could explain the influences of changes in the surfactant concentration on k_obs. The kinetic effect of added NaClO₄ on the reaction rate in SB3‐14 micellar solutions has also been studied. They were rationalized by considering the binding of the perchlorate anions to the sulfobetaine micelles and their competition with the reactive bromide ions for the micellar surface. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 388–394, 2000     

Effects of Micellar Aggregates on the Kinetics and Mechanism of the Reaction between 4‐Nitrobenzenediazonium Ions and Some Amino Acids

We have explored the kinetics and mechanism of the reaction between 4‐nitrobenzenediazonium ions (4NBD), and the hydrophilic amino acids (AA) glycine and serine in the presence and absence of sodium dodecyl sulfate (SDS) micellar aggregates by means of UV/VIS spectroscopy. The observed rate constants k_obs were obtained by monitoring the disappearance of 4NBD with time at a suitable wavelength under pseudo‐first‐order conditions. In aqueous acid (buffer‐controlled) solution, in the absence of SDS, the dependence of k_obs on [AA] was obtained from the linear relationship found between the experimental rate constant and [AA]. At a fixed amino acid concentration, k_obs values show an inverse dependence on acidity in the range of pH 5–6, suggesting that the reaction takes place through the nonprotonated amino group of the amino acid. All kinetic evidence is consistent with an irreversible bimolecular reaction with k=2390±16 and 376±7 M ^?1 s^?1 for glycine and serine, respectively. Addition of SDS inhibits the reaction because of the micellar‐induced separation of reactants originated by the electrical barrier imposed by the SDS micelles; k_obs values are depressed by factors of 10 (glycine) and 6 (serine) on going from [SDS]=0 up to [SDS]=0.05M . The hypothesis of a micellar‐induced separation of the reactants was confirmed by ¹H‐NMR spectroscopy, which was employed to investigate the location of 4NBD in the micellar aggregate: the results showed that the aromatic ring of the arenediazonium ion is predominantly located in the vicinity of the C(β) atom of the surfactant chain, and hence the reactive ? N group is located in the Stern layer of the micellar aggregate. The kinetic results can be quantitatively interpreted in terms of the pseudophase kinetic model, allowing estimations of the association constant of 4NBD to the SDS micelles.     

Effect of the Media on the Quantum Yield of Singlet Oxygen (O2(1Δg)) Production by 9H‐Fluoren‐9‐one: Microheterogeneous Systems

The quantum yield (Φ_Δ) of singlet oxygen (O₂(¹Δ_g) production by 9H‐fluoren‐9‐one (FLU) is very sensitive to the nature of the solvent (0.02 in a highly polar and protic solvent, such as MeOH, to 1.0 in apolar solvents). This high sensitivity has been used for probing the interaction of FLU with micellar media and microemulsions based on anionic (sodium dodecyl sulfate, SDS; bis‐(2‐ethylhexyl)sodium sulfosuccinate, AOT), cationic (cetyltrimethylammonium chloride, CTAC) and nonionic (Triton X‐100, TX) surfactants. Values of Φ_Δ of FLU vary in a wide range (0.05–1.0) in both microheterogeneous media and neat solvent, and provide information on the microenvironment of FLU, i.e., on its localization within organized media. In ionic and nonionic micellar media, as well as in four‐component microemulsions, FLU is, to various extents, exposed to solvation by the polar and protic components of the microheterogeneous systems (water and/or butan‐1‐ol) in the micellar interfacial region (Φ_Δ=0.05–0.30). In contrast, in AOT reverse micelles (consisting of AOT as surfactant, cyclohexane as hydrophobic component, and water), FLU is located in the hydrophobic continuous pseudophase, and is totally separated from the micellar water pools (Φ_Δ≈1.0).     

Pulse radiolysis study of redox reactions of safranine T in sodium dodecylsulphate (SDS) micellar medium

Reaction of hydrated electrons with safranine T (SF⁺), a phenazine dye useful as sensitizer in photogalvanic cell and the transient semireduced species formed by this reaction have been studied in SDS micellar medium using the technique of pulse radiolysis. Thee _aq ⁻ reaction with SF⁺ in the micellar environment was only marginally slower (5.1 × 10⁹ dm³ mol⁻¹ s⁻¹) as compared to that in homogeneous aqueous medium (2.2 × 10¹⁰ dm³ mol⁻¹ s⁻¹) explicable on the basis of our finding that although a large fraction of the dye gets localized near the micelle Stern layer where the molecule experiences a dielectric.constant of ≈40, a small but significant concentration of the dye exists in the aqueous bulk as charge pair complex with the anionic surfactant monomer (association constant for the formation of the complex being 2.8 × 10⁴ dm³ mol⁻¹). The transient semireduced absorption band observed in the micellar medium showed a red shift of ≈ 50 nm and also the decay of the transient, which was very fast with 2k = 1 × 10⁹ dm³ mol⁻¹ s⁻¹ in aqueous medium, was stable in the SDS micellar medium over a few tens of milliseconds suggesting that the radical is incorporated deeper than the parent molecule in the SDS micelle. The effect of this stability on the photogalvanic conversion needs to be examined.