Cycling performance of LiNi<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>Mn<Subscript>2 − <Emphasis Type="Italic">y</Emphasis></Subscript>O<Subscript>4</Subscript> prepared by the solid-state reaction

In order to improve the cycling performance of LiMn₂O₄, a part of Mn in LiMn₂O₄ was replaced by Ni. LiNi _y Mn_{2 − y} O₄ (y = 0.02, 0.05, 0.10, 0.15, and 0.20) were synthesized by preheating a mixture of LiOH, MnO₂ (CMD), and NiO at 400°C for 10 h and then calcining at 850°C for 48 h in air with intermediate grinding. The voltage vs. discharge capacity curves at a current density of 300 μA/cm² between 3.5 and 4.3 V showed two plateaus, but the plateaus became unclear as the value of y increased. The sample with y = 0.02 had the largest first discharge capacity of 118.1 mA h/g. The LiNi_0.10Mn_1.90O₄ sample had a relatively large first discharge capacity of 95.0 mA h/g and snowed an excellent cycling performance.     

<Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> Diagram of MgO–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System: Microstructure Design

A computer model of the T–x–y diagram of MgO–SiO₂–Al₂O₃ system is used to show the possibility of analysis of its microstructure constitution in terms of competition between primary and eutectic crystals by means of vertical mass balance diagrams calculated for a given centroid over the whole temperature range. The usefulness of horizontal mass balance diagrams is considered for studying phase relations at a fixed temperature along the chosen isopleth. Mass balances were used to determine the crystallization path at the quasi-peritectic liquidus point with the invariant reaction L + Al₂O₃ = 3Al₂O₃ · 2SiO₂ + MgO · Al₂O₃, whose composition was taken into account in giving a rationale to corundum armor element technology.     

Thermal analysis of the Ce<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Tb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> pigments

Compounds based on CeO₂ were synthesized as high-temperature environment-friendly inorganic pigments with interesting hues. The pigments have been synthesized by using the solid state reaction in the temperature range from 1,300 to 1,600 °C. The host lattice of these pigments is CeO₂ that is doped by terbium ions. The incorporation of doped ions provides interesting orange colours after application into ceramic glaze. The goal was to develop conditions for the synthesis of these compounds and to determine the influence of calcination temperature on their colouring effects. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. The pigments were also evaluated from the standpoint of their structure and particle sizes.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

TiO<Subscript>2</Subscript>/TiO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>N<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> nanocomposite and its acetaldehyde photodecomposition ability

Nitrogen-doped titania was coupled with the commercial titania nanoparticles by mechanical milling in liquid medium. The as-prepared nanocomposites (TiO₂/TiO_2−x N _y ) were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) specific surface area, UV–Vis spectroscopy, chemiluminescence, and acetaldehyde decomposition activity techniques. When a small amount of nitrogen-doped titania was added into the commercial titania, higher intensity and longer lifetime of ¹O₂ was observed, and the photocatalytic activity was efficiently improved. The TiO_2−x N _y acts as the acceptor of photoinduced holes. The recombination of the electron-hole was effectively depressed by the heterogeneous electron transfer. This could be an effective way to obtain highly active photocatalysts.     

Obtaining nanostructured films of PbSe<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>S<Subscript>1–<Emphasis Type="Italic">y</Emphasis></Subscript> solid solutions by chemical deposition

We propose a technique for wet-chemical codeposition of lead sulfide and selenide using thiourea and selenourea to form films of PbSe _y S_1–y substitutional solid solutions. The synthesized nanocrystalline layers with NaCl (B1) structure simultaneously contain both PbS-based and PbSe-based PbSe _y S_1–y solid solutions (0 < y < 0.9).     

Sol-Gel Synthesis and Properties of Y<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Ba<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> Nanocrystals

The sol-gel method was used to prepare Y_1–xBa_xFeO₃ (x = 0, 0.05, 0.1, 0.15, 0.2) nanocrystals. The influence of the dopant content on the particle size and magnetic properties of yttrium ferrite was examined.     

Ionic conduction of Li<Subscript>8 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Mg<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>ZrO<Subscript>6</Subscript> solid solutions

A boundary of existence of solid solutions in the Li_8−2x Mg _x ZrO₆ system is found to be 7 mol % MgO. The transport properties of Li_{8 − 2x} Mg _x ZrO₆ solid solutions (the electronic component of total conductivity, the temperature and concentration dependences of conductivity and activation energy) are studied. It is supposed that, for Li₈ZrO₆ phase and solid solution based on it, an abrupt change of conductivity in the temperature range from 663 to 713 K is caused by the transition of electrolyte into the superionic state.     

Preparation of mesoporous Ce<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> mixed oxides and their catalytic properties in methane combustion

Mesoporous Ce_{1 ? x} Fe _x O₂ mixed oxide catalysts of different molar ratios (x = 0.1–0.5) were prepared by the citric acid sol-gel method and the microwave technique. The activities of Ce_{1 ? x} Fe _x O₂ mixed oxides on methane combustion were investigated, and the structure and reductive properties were characterized by XRD, BET, DRS, and TPR. The data showed that Ce_{1 ? x} Fe _x O₂ mixed oxides prepared were mesoporous material. When x ≤ 0.2, the transition metal Fe incorporated into the lattice of CeO₂ to form cubic Ce_{1 ? x} Fe _x O₂ solid solutions, and mixed phases of cubic Ce_{1 ? x} Fe _x O₂ solid solutions and α-Fe₂O₃ existed when x > 0.2. Ce_{1 ? x} Fe _x O₂ solid solutions show higher activity for methane combustion than pure CeO₂, especially for Ce_0.9Fe_0.1O₂.     

Synthesis of (Ni<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)<Subscript>2</Subscript>P (0 ≤ <Emphasis Type="Italic">x</Emphasis> ≤ 0.65) substitution solid solution

The phosphides (Ni_{1 ? x} Co _x )₂P (0 ≤ x ≤ 0.65) crystallizing in the hexagonal system, space group P \(\bar 6\)2m, were synthesized in two steps starting from the continuous solid solution (Ni_{1 ? x} Co _x )₃(PO₄)₂ · 8H₂O. The initial phosphates were first completely dehydrated at 800°C and then reduced with hydrogen at 900–1000°C for 1–2 h.     

Mg<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>SiO<Subscript>4</Subscript> compound obtained via sol–gel method: structural,morphological and electrochemical properties

Prospective cathode materials Mg_2-xMn _x SiO₄ (0.0?≤?x?≤?0.4) for magnesium-ion secondary battery were synthesized using sol gel method. Crystalline structure, morphology, particle size, electrical and electrochemical properties of the samples were investigated. X-ray diffraction patterns of the materials exhibited no extra peak for x?≤?0.6 indicated that Mg_2-xMn _x SiO₄ materials were successfully synthesized. Mn doping in magnesium site did not affect the formation of single phase, and this probably due to the low concentration of Mn to induces structural changes. Mn doping contributed to the enhancement of the electrochemical performance of Mg₂SiO₄. For this work, Mg_1.4Mn_0.6SiO₄ which possesses the largest unit cell volume, smallest charge transfer resistance, and highest conductivity value showed the most promising electrochemical performance compared to the other samples. These results indicated the suitability of the Mg_2-xMn _x SiO₄ to be exploiting further for potential applications as solid electrolytes in electrochemical devices and strengthen the fact that doping could be an effective way to enhanched the structural, electrical and electrochemical performance of materials.

Open image in new window

     

Production and characteristics of substituted lanthanum niobate LaNb<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>W<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4 + δ</Subscript>

Solid solutions LaNb_1–x W _x O_{4 + δ} (x = 0.02–0.10, Δx = 0.02) were investigated, which crystallize in the monoclinic system (space group I2/c) at room temperature and undergo a phase transition into the tetragonal modification with increasing temperature. The stability of various modifications was analyzed by high-temperature X-ray powder diffraction analysis. The electrical conductivity of sintered samples was studied by impedance spectroscopy. Insertion of tungsten into the niobium sublattice leads to an increase in the conductivity of the solid solutions.     

Electrotransport Properties of Ceramics Based on Bi<Subscript>4</Subscript>V<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript>x</Subscript>O<Subscript>11 − <Emphasis Type="Italic">x</Emphasis></Subscript>

Conditions for the formation of single-phase compounds in the synthesis of solid solutions Bi₄V_{2 − x} Fe_xO_{11 − x} are studied. The sequence of phase transitions is determined. Parameters of unit cells of solid solutions are determined. The net conductance as a function of temperature and composition is studied.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 607–609.Original Russian Text Copyright © 2005 by Emel’yanova, Buyanova, Zhukovskii.     

Storage performance of LiFe<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>PO<Subscript>4</Subscript> nanoplates (<Emphasis Type="Italic">x </Emphasis>= 0, 0.5, and 1)

Although LiFePO₄ (LFP) is considered to be a potential cathode material for the lithium-ion batteries, its rate performance is significantly restricted by sluggish kinetics of electrons and lithium ions. Several attempts have been made so far to improve the performance of LiFePO₄ by reducing the grain size, doping with aliovalent atoms, and coating conductive materials such as carbon or RuO₂. We report here synthesis of LFP nanoplates by solvothermal method, tailoring the thickness as well as carbon coverage at surfaces to explore their influence on the storage performance. Due to the fact that Li⁺ ion diffuses along the b-axis, solvothermal method was aimed to control the thickness of nanoplates across the b-axis. We synthesized several nanoplates with various plate thicknesses along b-axis; among those, nanoplates of LFP with ～30-nm-thick b-axis having thin (2–5 nm) and uniform layer of carbon coating exhibits high storage capacity as well as high rate performances. Thus, a favorable morphology for LiFePO₄ has been achieved via solvothermal method for fast insertion/extraction of Li⁺ as compared to spherical nanoparticles of carbon-coated LFP. Galvanostatic cycling shows a capacity of 164?±?5 mAh g^?1 at 0.1 C rate, 100?±?5 mAh g^?1 at 10 C rate, and 46?±?5 mAh g^?1 at 30 C rate, with excellent capacity retention of up to 50 cycles. Further attempts have been made to synthesize LiMnPO₄ (LMP) as well as Li(Fe_1???x Mn _x )PO₄/C (x?=?0.5) nanoplates using solvothermal method. Although LiMnPO₄ does not exhibit high storage behavior comparable with that of LiFePO₄, the mixed systems have shown an impressive storage performance.     

Density-Functional Theory of Vibrations in Ni<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>V<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Clusters

We have performed the calculation of the vibrational frequencies, Fermi energy and binding energy for several clusters of Ni and vanadium atoms by using the first principles. The calculations are performed by using the density-functional theory in the local-density approximation with spin polarized orbitals. The calculation of vibrational frequencies shows that some of the clusters have positive vibrational frequencies which describe the oscillations of the stable clusters. The negative vibrational frequencies indicate that these clusters are instable with respect to these vibrations when no energy of this frequency is supplied. We find that for vanadium concentration less than 11.1% the clusters of Ni and V atoms are not stable. Hence ferromagnetism in Ni is predicted below 11.1% vanadium. We find the vibrational frequencies of several clusters for which the vanadium concentration is more than 11.1%. We are able to find a phase transition by use of quantum mechanics alone without the use of classical mechanical variables or thermodynamic variables such as temperature.     

Impedance spectroscopy of oxide ceramics with overall composition of Bi<Subscript>4</Subscript>V<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Me<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>11 − δ</Subscript>

The paper presents a generalization for some studies of conducting properties of ceramics based on solid solutions with the general composition of Bi₄V_{2 − x} Me _x O_{11 − δ} of the BIMEVOX family obtained using the impedance spectroscopy method. The regularities of the impedance spectra and typical complex plane plots are considered and the corresponding equivalent circuits are analyzed.     

Chemical etching of Cd<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te solid solution single crystals with iodine solutions in methanol

Chemical etching of Cd_{1 ? x} Mn _x Te (0.04 < x < 0.5) solid solution (ss) single crystals in I₂ + CH₃OH etching mixtures was studied. Concentration and kinetic curves of etching rates were plotted. As the manganese concentration of the solid solution increases, the rates of their etching by iodine-methanol etchants increase, too. The etchant compositions and chemical-dynamic polishing protocols for Cd_{1 ? x} Mn _x Te single crystals were optimized.     

Aqueous germanate solution,alternative sol–gel precursor for preparation of Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> diluted magnetic semiconductors

The solids content and gelation time of aqueous germanate solution were examined in this work. Samples of 5, 10 and 20 mol% Mn doped Ge were prepared by using the aqueous germanate solution as a liquid Ge precursor. No second phase such as Mn₅Ge₃ was detected in the 5 and 10 mol% Mn doped samples, implying that Mn ions were uniformly diluted into the Ge host matrix. The 5 and 10 mol% Mn-doped Ge samples exhibit room-temperature ferromagnetic behaviors that are likely originated from the RKKY (Ruderman–Kittel–Kasuya–Yosida)-like interaction between the localized Mn ions in the Ge matrix. Therefore, the aqueous germanate solution can be an alternative sol–gel precursor for preparation of the Mn _x Ge_1−x diluted magnetic semiconductors (DMSs).     

Potassium-conducting solid electrolytes in K<Subscript>1 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>GaO<Subscript>2</Subscript> system

New solid electrolytes with a high conductivity by K⁺ ions in the K_{1 − 2x} Sr _x GaO₂ system are synthesized and studied. It is found that the introduction of Sr²⁺ ions into potassium monogallate leads to the formation of solid solutions with KGaO₂ structure in a wide range of additive concentration. These solid solutions exhibit a high conductivity; the conductivity increases monotonically with increasing concentration of strontium within the single-phase range. The electrical characteristics are related to the electrolyte structure. The results are compared with the earlier data for the gallate solid electrolytes with the additives of four-charged cations and the systems based on potassium monoferrite and monoaluminate.