Mixed adsorption of poly(vinylpyrrolidone) and sodium dodecylbenzenesulfonate on kaolinite

The mixed adsorption of the nonionic polymer poly(vinylpyrrolidone) (PVP) and the anionic surfactant sodium dodecylbenzenesulfonate (SDBS) on kaolinite has been studied. Both components adsorb from their mixture onto the clay mineral. The overall adsorption process is sensitive to the pH, the electrolyte concentration, and the amounts of polymer and surfactant. Interpretation of the experimental data addresses also the patchwise heterogeneous nature of the clay surface. In the absence of PVP, SDBS adsorbs on kaolinite by electrostatic and hydrophobic interactions. However, when PVP is present, surfactant adsorption at 10(-2) M NaCl is mainly driven by charge compensation of the edges. The adsorption of PVP from the mixture shows similar behavior under different conditions. Three regions can be distinguished based on the changing charge of polymer-surfactant complexes in solutions with increasing SDBS concentration. At low surfactant content, PVP adsorbs by hydrogen bonding and hydrophobic interactions, whereas electrostatic interactions dominate at higher surfactant concentrations. Over the entire surfactant concentration range, polymer-surfactant aggregates are present at the edges. The composition of these surface complexes differs from that in solution and is controlled by the surface charge.     

Electrokinetic and thermodynamic analysis of the adsorption process of N-cetylpyridinium chloride on polyester fabric

An electrokinetic and thermodynamic analysis of the adsorption process of N-cetylpyridinium chloride on polyester fabric is described in the present work. The electrokinetic study was performed by means of electrophoretic mobility measurements of the polyester-surfactant system. The most significant result is the increase in electrokinetic potential, zeta, toward more positive values as the surfactant concentration in the dispersion medium is raised. Given the molecular structure of N-cetylpyridinium chloride (N-CP-Cl), which contains a pyridinium group, positively charged, it is feasible that such increase in |zeta| is due to the electrostatic attraction between the carboxyl groups of polyester, ionized at pH 8.5, and the pyridinium group of the surfactant. The uptake of N-CP-Cl by the fiber is experimentally determined at four temperatures: the strong increase in the amount of the surfactant incorporated onto the fiber as the initial concentration of N-CP-Cl is larger shows that the electrostatic attraction between the fiber and the surfactant is the main mechanism of the adsorption of the surfactant onto the fiber. The obtained data on the kinetics and thermodynamics of adsorption of N-cetylpyridinium chloride onto the polyester, standard free energy, enthalpy, and entropy related to the process of adsorption are in accordance with our hypothesis on the mechanisms of adsorption. From a different point of view, the efficient coverage of polyester by N-CP-Cl is also demonstrated by the changes experienced by the surface free energy of polyester upon treatment with N-CP-Cl.     

Nickel Sorption Mechanisms in a Pyrophyllite-Montmorillonite Mixture

Nickel sorption on pyrophyllite, montmorillonite and a 1:1 pyrophyllite-montmorillonite mixture was studied at pH 7.5 and a reaction time of 40 min. The main modes of Ni uptake under these reaction conditions are adsorption on montmorillonite and surface precipitation on pyrophyllite. For the clay mixture, where adsorption on the montmorillonite component and surface precipitation on the pyrophyllite component compete for Ni uptake, X-ray absorption fine structure spectroscopy (XAFS) was used to estimate the distribution of Ni over the mixture components. This was done by comparison to pyrophyllite-montmorillonite mixtures with known Ni distributions over the mixture components. Nickel uptake on singly reacted pyrophyllite was slightly higher than on singly reacted montmorillonite. This was consistent with the XAFS results for the clay mixture, which suggested that the pyrophyllite component sorbed slightly more Ni than the montmorillonite component. Our findings suggested that both adsorption and surface precipitation were important mechanisms in the overall Ni uptake in the clay mixture, and that neither sorption mechanism truly out-competed the other in the reaction time of 40 min employed. Therefore, both mechanisms should be considered when modeling Ni sorption in similar systems. Copyright 1999 Academic Press.     

Effect of lateral heterogeneity in mixed surfactant-stabilized interfaces on the oxidation of unsaturated lipids in oil-in-water emulsions

The development of lipid oxidation in oil-in-water (O/W) emulsions is widely influenced by the properties of the interfacial layer, which separates the oil and water phases. In this work, the effect of the structure of the interface on the oxidative stability of surfactant stabilized O/W emulsions was investigated. Emulsions were prepared with either single Tween 20 or Tween 20/co-surfactant mixtures in limiting amounts. The co-surfactants, Span 20 and monolauroyl glycerol have the same hydrophobic tail as Tween 20 but differ by the size and composition of their polar headgroup. Metal-initiated lipid oxidation, monitored through the measurement of oxygen uptake, formation of conjugated dienes and volatile compounds, developed more rapidly in the emulsions stabilized by the surfactant mixture than in the single Tween 20-stabilized emulsion. The reconstitution of Tween 20/co-surfactant films at the air-water interface and their surface-pressure isotherms highlighted that, contrary to single Tween 20 molecules, Tween 20/co-surfactant mixtures exhibited an heterogeneous distribution within the interfacial layer, offering probably easier access of water-soluble pro-oxidants to the oil phase. These observations provide direct information about the link between the homogeneity of the interface layer and the oxidative stability of emulsions.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

Thermodynamics of Chromium(VI) Anionic Species Sorption onto Surfactant-Modified Montmorillonite Clay

Batch sorption experiments performed on Cr(VI) species sorption showed a significantly enhanced removal of inorganic hexavalent chromium anionic species from aqueous solution by montmorillonite clays modified with quaternary amine, hexadecyltrimethylammonium (HDTMA) bromide. Unmodified clay had no affinity for chromium(VI) species. The sorption of Cr(VI) species has been carried out as a function of pH, contact time, adsorbate concentration (4.14x10(-5) to 8.62x10(-3) M), and temperature (5-45 degrees C). The surfactant-modified clay surface was stable when exposed to extremes in pH. The optimum pH for maximum sorption of Cr(VI) species was found to be at pH 1 and was constant between pH 2 and pH 6. The sorption data obtained was well described by DKR and Langmuir sorption isotherms. Sorption energy (E) for (i) surfactant sorption by montmorillonite clay and (ii) sorption of chromium(VI) species by surfactant modified clay have been computed from the DKR equation. Sorption energy evaluated for the sorption of both surfactant and Cr(VI) species showed that an ion-exchange mechanism was operative. The mechanism of retention appears to be replacement of counterion of the surfactant by Cr(VI) anionic species. Adsorbent capacity for the sorption of Cr(VI) species has been evaluated from the Langmuir sorption isotherm data. Thermodynamic parameters (Delta H degrees, Delta S degrees and Delta G degrees ) for surfactant sorption on montmorillonite clay and Cr(VI) sorption by modified clay have been evaluated. The specific rate constant for sorption of Cr(VI) species on modified montmorillonite was rapid during the first 10 min and equilibrium was found to be attained within 30 min. The sorption of Cr(VI) species onto modified montmorillonite clay followed first-order rate kinetics. Copyright 2000 Academic Press.     

胶束溶液体系对毛细管电动色谱酸性化合物分离的影响

以阴离子表面活性剂十二烷基硫酸钠（SDS）、非离子表面活性剂吐温20（ Tween 20）及两者组成的混合胶束体系作为毛细管胶束电动色谱（MECC）的分离介 质，进行4种结构相似的酸性化合物的MECC分离研究，考察了胶束的类型、表面活 性剂的浓度、缓冲溶液的pH值及有机改性剂乙醇对分离的影响。结果表明各因素对 酸性药物的MECC分离有不同的影响规律。SDS胶束体系对溶质的保留值最大， Tween 20体系的保留值最小，二者的分离选择性正好相反，混合胶束体系的分离行 为则介于两者之间；在SDS和Tween 20体系中，表面活性剂浓度增加，溶质的保留 时间均随之递增，混合胶束体系中，总浓度一定，随Tween 20配比的增加，溶质的 保留时间先减少后增加；缓冲溶液的pH值增大，使溶质的分离效果均能变差；有机 改性剂乙醇的加入对容量因子的影响主要与溶质的疏水性有关，并对分离作用机理 进行了探讨。在SDS和Tween 20 MECC体系下，分别进行了实样测定，取得了满意的 结果。     

Adsorption Behavior of Lysozyme and Tween 80 at Hydrophilic and Hydrophobic Silica–Water Interfaces

Nonionic surfactants such as Tween 80 are used commercially to minimize protein loss through adsorption and aggregation and preserve native structure and activity. However, the specific mechanisms underlying Tween action in this context are not well understood. Here, we describe the interaction of the well-characterized, globular protein lysozyme with Tween 80 at solid–water interfaces. Hydrophilic and silanized, hydrophobic silica surfaces were used as substrates for protein and surfactant adsorption, which was monitored in situ, with ellipsometry. The method of lysozyme and Tween introduction to the surfaces was varied in order to identify the separate roles of protein, surfactant, and the protein–surfactant complex in the observed interfacial behavior. At the hydrophobic surface, the presence of Tween in the protein solution resulted in a reduction in amount of protein adsorbed, while lysozyme adsorption at the hydrophilic surface was entirely unaffected by the presence of Tween. In addition, while a Tween pre-coat prevented lysozyme adsorption on the hydrophobic surface, such a pre-coat was completely ineffective in reducing adsorption on the hydrophilic surface. These observations were attributed to surface-dependent differences in Tween binding strength and emphasize the importance of the direct interaction between surfactant and solid surface relative to surfactant–protein association in solution in the modulation of protein adsorption by Tween 80.     

Surfactant immobilized interlayer species bonded to montmorillonite as recyclable adsorbent for lead ions

Removal of lead ( Pb2+ ) ions from aqueous solution by adsorption onto surfactant-immobilized interlayer species bonded to montmorillonite clay (SIIS-clay) was investigated. Surfactant-immobilized interlayer chromate bound to clay (SIICr-clay) was prepared by treatment of montmorillonite clay with hexadecyltrimethylammonium (HDTMA) bromide followed by chromate adsorption at the intergallery framework of the clay. Experiments were carried out as a function of solution pH, solute concentration, and temperature (5-45 degrees C). The Dubinin-Kaganer-Radushkevich (DKR) model was adopted to describe the single-solute adsorption isotherms. Adsorption energy for lead ions on SIICr-clay computed from the DKR equation shows that a precipitation mechanism was operative. The thermodynamic parameters ( Delta G 0, Delta H 0, and Delta S 0) for lead ion adsorption on SIICr-clay were also determined from the temperature dependence. The kinetics of metal ion adsorption was examined and the first-order rate constant was finally evaluated. Adsorbed lead ions could be recovered completely on leaching with the disodium salt of ethylenediamine tetraacetic acid (EDTA) solution and the adsorbent was found to readsorb lead ions repeatedly after leaching. Thus, surfactant-modified smectite clays offer an effective method for designing a recyclable adsorbent for lead ions.     

疏水化水溶性两性纤维素接枝共聚物与粘土的相互作用

运用紫外光谱法研究了疏水化水溶性两性纤维素接枝共聚物(羧甲基纤维素接枝丙烯酰胺及N,N 二甲基辛基(2 甲基丙烯酰氧乙基)溴化铵的共聚物, CGAO)在粘土上的吸附,考察了聚合物浓度、无机盐浓度、温度、 pH、 表面活性剂和粘土浓度等因素对CGAO在粘土上吸附量的影响,以及通过X射线衍射分析了CGAO在粘土上的吸附位置.结果表明， CGAO在粘土上的吸附规律与一般聚合物有很大差别,而且CGAO未深入到粘土晶层间,只在其表面吸附. 粘土与CGAO作用前后的粒度分析表明CGAO对粘土粒子有很好的桥接聚集作用. 扫描电镜分析显示粘土与CGAO作用后,其颗粒形态发生了显著变化.     

Characterization of chitosan nanofiber fabric by electrospray deposition: electrokinetic and adsorption behavior

Cationic biopolymer nanofiber fabrics were prepared from a chitosan/poly(ethylene oxide) blend solution by electrospray deposition. Their electrokinetic properties and DNA adsorption behavior were analyzed as a function of pH. The zeta potential was determined from streaming potential/streaming current measurements. The adsorption of DNA onto the fabrics was investigated by spectrophotoscopy. The adsorption behavior of DNA correlated well with the electrokinetic properties of the fabrics. This revealed that the electrokinetic approach was a useful option for characterization of novel nanofiber assemblies made by the electrostatic spray process. In addition, these results provided fundamental information about chitosan nanofiber fabrics for both biomedical and analytical applications.     

Preparation and characterization of organoclays based on an amphoteric surfactant

The uptake of the amphoteric surfactant, cocamidopropyl betaine (CAB) by a sodium montmorillonite clay was studied with respect to concentration and pH. A series of organoclays was prepared in which the basal spacings were found to depend on both parameters. Adjusting the solution pH during preparation influenced the adoption of either 1.8 or 2.0 nm spacing, whereas the 3.9 nm spacing in the same sample was unaffected. The presence of the carboxyl group in the CAB molecule enabled dispersion of the clay at higher pH by which means pure organoclays of high spacing could be obtained, whereas, without dispersing the clay, mixed populations were obtained. The results indicate the optimum parameters for preparing organoclays of desired spacings for use in clay-reinforced nanocomposites.     

Dispersion stability of a ceramic glaze achieved through ionic surfactant adsorption

The adsorption of cetylpyridinium chloride (CPC) and sodium dodecylbenzenesulfonate (SDBS) onto a ceramic glaze mixture composed of limestone, feldspar, quartz, and kaolin has been investigated. Both adsorption isotherms and the average particle zeta potential have been studied in order to understand the suspension stability as a function of pH, ionic strength, and surfactant concentration. The adsorption of small amounts of cationic CPC onto the primarily negatively charged surfaces of the particles at pH 7 and 9 results in strong attraction and flocculation due to hydrophobic interactions. At higher surfactant concentrations a zeta potential of more than +60 mV results from the bilayered adsorbed surfactant, providing stability at salt concentrations < or = 0.01 M. At 0.1 M salt poor stability results despite substantial zeta potential values. Three mechanisms for SDBS adsorption have been identified. When anionic SDBS monomers either adsorb by electrostatic interactions with the few positive surface sites at high pH or adsorb onto like charged negative surface sites due to dispersion or hydrophobic interactions, the magnitude of the negative zeta potential increases slightly. At pH 9 this increase is enough to promote stability with an average zeta potential of more than -55 mV, whereas at pH 7 the zeta potential is lower at about -45 mV. The stability of suspensions at pH 7 is additionally due to steric repulsion caused by the adsorption of thick layers of neutrally charged Ca(DBS)2 complexes created when the surfactant interacts with dissolved calcium ions from the calcium carbonate component.     

Zn adsorption by different fractions of Galician soils

To evaluate the contribution of organic matter, oxides, and clay fraction to Zn adsorption in six soils from Galicia (Spain), after soil characterization, adsorption isotherms were obtained by adding nine solutions containing between 20 and 500 mg L(-1) concentrations of Zn(NO(3))(2). Distribution coefficients were obtained from the data of adsorption isotherms. Zn adsorption isotherms corresponding to untreated soil and to the organic matter removed samples and organic matter and oxides removed samples were compared with curves pattern and adjusted to Langmuir and Freundlich empirical models. Untreated soils described L-curves whereas when soils were deprived of any component, the curves described were S-type. Distribution coefficients allowed knowing the Zn adsorption capacity of the untreated soil, and of the organic matter, oxides, and clay fraction. Soil organic matter is the main component that affects Zn adsorption as long as soil pH is near neutrality. At acid pH, the oxides are the main component that affects Zn adsorption, although to a much smaller extent than the organic matter near neutral conditions. So soil pH is the main soil factor that determines Zn adsorption, before any other soil property.     

Polychlorinated Biphenyls-contaminated Soil Washing with Mixed Surfactants Enhanced by Electrokinetics

On the basis of comparing the adsorption loss of different surfactants[single nonionic surfactant sorbitanmonooleatepolyoxyethylene ether(Tween 80), anionic surfactant sodium dodecyl benzene sulfonate(SDBS), and mixed surfactants Tween 80/SDBS(3:2), Tween 80/SDBS(4:1)] and their performance in the enhancement of polychlorinated biphenyls(PCBs) desorption from soil, the impact of electric field intensity on the desorption of PCBs and the transport of surfactants in washing resulted solution were investigated in this study. With regard to the remediation cost, 1000 mg/L mixed Tween 80/SDBS(3:2) was recognized as an optimum concentration in the remediation of PCBs-contaminated soil, because Tween 80/SDBS(3:2) had the highest washing capacity and relatively low adsorption loss onto soil. Electrokinetics can enhance the washing efficiency of PCBs-contaminated soil by Tween 80/SDBS(3:2) effectively and safely at an electric field intensity of 1.5 V/cm for 10 d, for the desorption of PCBs was 1.57 times more than that without electrokinetics, and the most of organic residue in washing resulted solution was removed in an electrical field to avoid the possible secondary contamination risk.     

Adsorption of methylene blue on Cu(II)-exchanged montmorillonite

Cu(2+)-exchanged montmorillonite (CEM) was prepared using the method of ion exchange reaction. The goal was to determine the adsorption of methylene blue (MB) onto montmorillonite and CEM. The results showed that treatment with Cu(2+) slightly reduced the adsorption of montmorillonite. Temperature, pH value, and ionic strength in the medium had greater or smaller effects on interaction between MB and the clay. The data obtained from MB adsorption onto the tested adsorbents followed the Langmuir and BET equations. Also, the adsorption processes were endothermic and spontaneous in nature.     

Adsorptive removal of tannin from aqueous solutions by cationic surfactant-modified bentonite clay

The removal of tannin from aqueous media by cationic surfactant-modified bentonite clay was studied in a batch system. The surfactant used was hexadecyltrimethylammonium chloride. Adsorbent characterizations were investigated using X-ray diffraction, infrared spectroscopy, surface area analysis, and potentiometric titration. The effects of pH, contact time, initial solute concentration, adsorbent dose, ionic strength, and temperature on the adsorption of tannin onto modified clay were investigated. The adsorbent exhibited higher tannin removal efficiency (>99.0%) from an initial concentration of 10.0 micromol/L at pH 3.0. Adsorption capacity decreased from 90.1 to 51.8% with an increase in temperature from 10 to 40 degrees C at an initial concentration of 25.0 micromol/L. The adsorption process was found to follow pseudo-first-order kinetics. Film diffusion was found to be the rate-limiting step. Tannin adsorption was found to decrease with increase in ionic strength. The tannin equilibrium adsorption data were fitted to Langmuir and Freundlich isotherm models, the former being found to provide the best fit of the experimental data. The maximum monolayer adsorption capacity for tannin was 69.80 micromol/g at 30 degrees C. Comparison of adsorption capacity of the modified clay with reported adsorbents in the literature was also presented. Adsorbed tannin on modified clay can be recovered by treatment with 0.1 M NaOH solution. Regeneration experiments were tried for four cycles and results indicate a capacity loss of <10.0%. From the results it can be concluded that the surfactant-modified clay could be a good adsorbent for treating tannin-contaminated waters.     

Nanocomposite-based lignocellulosic fibers 3: polyelectrolyte adsorption onto heterogeneous fiber surfaces

Wood and natural fibers are composed of multiple polymeric components. Lignin, one primary component, is typically removed to various degrees during paper-making, but is present on thermomechanically isolated fibers. The effect of the residual lignin on the adsorption of poly(diallyldimethylammonium) chloride (PDDA) onto lignocellulosic fibers was investigated under varying solution conditions (electrolyte concentration and pH). Using nitrogen elemental analysis it was shown for the samples containing the highest concentration of lignin, PDDA adsorption to the fibers was reduced for all solution conditions. Upon extracting the alkali-soluble lignin, the samples showed the greatest amount of PDDA adsorption, achieving ~1.6% (w/w), under neutral solution conditions without the presence of added electrolyte. Furthermore, the influence of polyelectrolyte loading and electrokinetic potential on subsequent multilayer formation of PDDA and montmorillonite clay was quantified. It was revealed that electrokinetic potential of fiber after PDDA adsorption, rather than the amount of adsorbed PDDA layer, controlled the subsequent clay adsorption. Significant mass of PDDA/clay (up to ~75% of starting dry fiber mass for only 4 bi-layers) can be adsorbed onto steam-exploded wood fibers through the multilayer assembly process. This paper provides insight into how non-covalent modification of heterogeneous fibrous substrates offers a novel route for the creation of organic/inorganic fiber materials.     

有机凹凸棒土对二氯苯酚的吸附研究

本研究采用超声法用十六烷基三甲基溴化铵改性凹凸棒土制得了有机凹凸棒土(HDTMA-凹凸棒土),并采用XRD和FT-IR对其结构进行了表征。通过吸附实验研究了HDTMA-凹凸棒土对水溶液中二氯苯酚的吸附性能和吸附机理。结果表明:经有机改性后,HDTMA+成功进入到凹凸棒土的层间,HDTMA-凹凸棒土对二氯苯酚的吸附量比未改性凹凸棒土增大了近20倍。Freundlich方程能够较好的描述吸附等温线。二氯苯酚在HDTMA-凹凸棒土上主要是焓推动为主的物理吸附过程,且吸附过程放热。