Oleic acid coating on the monodisperse magnetite nanoparticles

Monodisperse magnetite nanoparticles provide a more factual model to study the interface interactions between the surfactants and magnetic nanoparticles. Monodisperse magnetite nanoparticles of 7 and 19 nm coated with oleic acid (OA) were prepared by the seed-mediated high temperature thermal decomposition of iron(III) acetylacetonate (Fe(acac)₃) precursor method. Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS) reveal that the OA molecules were adsorbed on the magnetic nanoparticles by chemisorption way. Analyses of transmission electron microscopy (TEM) shows the OA provided the particles with better isolation and dispersibility. Thermogravimetric analysis (TGA) measurement results suggest that there were two kinds of different binding energies between the OA molecules and the magnetic nanoparticles. The cover density of OA molecules on the particle surface was significantly various with the size of magnetite nanoparticles. Magnetic measurements of the magnetite nanoparticles show the surface coating reduced the interactions among the nanoparticles.     

Superparamagnetic silica nanoparticles with immobilized metal affinity ligands for protein adsorption

Superparamagnetic silica-coated magnetite (Fe₃O₄) nanoparticles with immobilized metal affinity ligands were prepared for protein adsorption. First, magnetite nanoparticles were synthesized by co-precipitating Fe²⁺ and Fe³⁺ in an ammonia solution. Then silica was coated on the Fe₃O₄ nanoparticles using a sol–gel method to obtain magnetic silica nanoparticles. The condensation product of 3-Glycidoxypropyltrimethoxysilane (GLYMO) and iminodiacetic acid (IDA) was immobilized on them and after charged with Cu²⁺, the magnetic silica nanoparticles with immobilized Cu²⁺ were applied for the adsorption of bovine serum albumin (BSA). Scanning electron micrograph showed that the magnetic silica nanoparticles with an average size of 190 nm were well dispersed without aggregation. X-ray diffraction showed the spinel structure for the magnetite particles coated with silica. Magnetic measurement revealed the magnetic silica nanoparticles were superparamagnetic and the saturation magnetization was about 15.0 emu/g. Protein adsorption results showed that the nanoparticles had high adsorption capacity for BSA (73 mg/g) and low nonspecific adsorption. The regeneration of these nanoparticles was also studied.     

A novel non-thermal process of TiO2-shell coating on Fe3O4-core nanoparticles

In this work magnetite (Fe₃O₄) nanoparticles coated with titanium dioxide (TiO₂) were prepared by a novel non-thermal method. In this method, magnetite and pure TiO₂ (anatase) nanoparticles were individually prepared by the sol–gel method. After modifying the surface of magnetite nanoparticles by sodium citrate, titanium dioxide was coated on them without using conjunction or heat treatment to obtain Fe₃O₄:TiO₂ core–shell nanoparticles. XRD, EDX, SEM, TEM and VSM were used to investigate the structure, morphology and magnetic properties of the samples. The average crystallite size of the powders was measured by Scherrer's formula. The results obtained from different measurements confirm the formation of Fe₃O₄:TiO₂ core–shell nanoparticles with a decrease in saturation magnetization. Hysteresis loops of the core–shell nanoparticles show no exchange bias effects, which confirms that there is no interaction or interdiffusion at the interface.     

The Study of Aggregation Processes in Colloidal Solutions of Magnetite–Silica Nanoparticles by NMR Relaxometry,AFM, and UV–Vis-Spectroscopy

Colloidal solutions of magnetic nanoparticles were studied as a promising magnetic resonance imaging (MRI) contrast agent. The problem of aggregative stability of solutions is considered. Sol-gel synthesis of magnetite colloidal solutions stabilized by silica is described. Transmittance spectra were measured to analyze sedimentation of nanoparticles in magnetite–silica solutions of different compositions and concentrations. It is shown that the synthesized nanoparticles can be used as MRI contrast agents. The surface morphology and particle size of Fe₃O₄/SiO₂ layers were estimated by atomic force mictroscopy (AFM) technique. The mechanism of magnetic-field-induced aggregation of Fe₃O₄/SiO₂ nanoparticles into chain-like and fractal structures is described.     

Preparation of Fe3O4/polystyrene composite particles from monolayer oleic acid modified Fe3O4 nanoparticles via miniemulsion polymerization

Fe₃O₄/polystyrene composite particles were prepared from oleic acid (OA) modified Fe₃O₄ nanoparticles via miniemulsion polymerization. It was concluded that the surface properties of OA modified magnetite nanoparticles have a great effect on preparation of the composite particles. When Fe₃O₄ nanoparticles coated by multilayer of OA was employed, there were large amounts of free polystyrene particles in the product. Fe₃O₄/polystyrene composite particles with defined structure and different magnetite content can be readily prepared from monolayer OA modified Fe₃O₄ nanoparticles. It was concluded that surface of the monolayer OA modified Fe₃O₄ nanoparticles is more hydrophobic than that of the multilayer coated ones, thus improving the dispersibility of the Fe₃O₄ nanoparticles in styrene monomer and allowing preparation of the Fe₃O₄/polystyrene composite particles with defined structure and controllable magnetite content.     

Synthesis of aqueous ferrofluids of ZnxFe3−xO4 nanoparticles by citric acid assisted hydrothermal-reduction route for magnetic hyperthermia applications

Superparamagnetic and monodispersed aqueous ferrofluids of Zn substituted magnetite nanoparticles (Zn_xFe_3−xO₄, x=0, 0.25, 0.3, 0.37 and 0.4) were synthesized via hydrothermal-reduction route in the presence of citric acid, which is a facile, low energy and environmental friendly method. The synthesized nanoparticles were characterized by X ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) spectroscopy, scanning and transmission electron microscopy (SEM and TEM) and the dynamic light scattering (DLS) method. The results showed that a certain amount of citric acid was required to obtain single phase Zn substituted magnetite nanoparticles. Citric acid acted as a modulator and reducing agent in the formation of spinel structure and controlled nanoparticle size and crystallinity. Mean particle sizes of the prepared nanoparticles were around 10 nm. The results that are obtained from XRD, magnetic and power loss measurements showed that the crystallinity, saturation magnetization (M_S) and loss power of the synthesized ferrofluids were all influenced by the substitution of Zn in the structure of magnetite. The Zn substituted magnetite nanoparticles obtained by this route showed a good stability in aqueous medium (pH 7) and hydrodynamic sizes below 100 nm and polydispersity indexes below 0.2. The calculated intrinsic loss power (ILP) for the sample x=0.3 (e.g. 2.36 nH m²/kg) was comparable to ILP of commercial ferrofluids with similar hydrodynamic sizes.     

Microwave-assisted synthesis of magnetite nanoparticles for MR blood pool contrast agents

Microwave-assisted polyol process was developed for the synthesis of magnetite nanoparticles with precisely controlled size, high crystallinity and high water solubility. The process is simple, time-saving and low energy-consuming due to the advantages of polyols and microwave irradiation combined. The crystal phases of the nanoparticles were determined by transmission electron microscopy, X-ray powder diffraction and Raman spectrum. The coating materials of the nanoparticles were analyzed by Fourier transformed infrared spectroscopy and thermal gravimetric analysis. Precise size tuning enables an easier way to adjust the relaxation properties of the magnetite nanoparticles. The colloid nanoparticles with high longitudinal relaxivity (r₁) and low ratio of transverse relaxivity (r₂) to r₁ have a potential application in magnetic resonance angiography.     

Magnetic and Mössbauer studies of fucan-coated magnetite nanoparticles for application on antitumoral activity

Fucan-coated magnetite (Fe₃O₄) nanoparticles were synthesized by the co-precipitation method and studied by Mössbauer spectroscopy and magnetic measurements. The sizes of the nanoparticles were 8–9 nm. Magnetization measurements and Mössbauer spectroscopy at 300 K revealed superparamagnetic behavior. The magnetic moment of the Fe₃O₄ is partly screened by the Fucan coating aggregation. When the magnetite nanoparticles are capped with oleic acid or fucan, reduced particle-particle interaction is observed by Mössbauer and TEM studies. The antitumoral activity of the fucan-coated nanoparticles were tested in Sarcoma 180, showing an effective reduction of the tumor size.     

Evidence for magnetic interactions among magnetite nanoparticles dispersed in photoreticulated PEGDA-600 matrix

Magnetite nanoparticles having mean diameter of about 8 nm have been prepared by a thermo-chemical route. Different amounts (5 and 10% wt) of a stable dispersion of magnetite nanoparticles in n-hexane were added to polyethylene glycol diacrylate (PEGDA-600) oligomer containing 2% wt of radicalic photoinitiator. The homogenized mixture was poured on a silica glass substrate and the resulting film was photoreticulated in N₂ atmosphere using a UV lamp. As a result, a polymer-based magnetic nanocomposite was obtained, where the magnetic nanoparticles are dispersed in the diamagnetic matrix, as checked by SEM. Morphology, composition, and size of as-prepared nanoparticles were checked by SEM and X-ray diffraction. The magnetic properties of magnetite nanoparticles prior to and after inclusion in the polymeric matrix have been studied by means of an alternating-gradient magnetometer (T interval: 10–300 K, H_MAX: 18 kOe). FC-ZFC curves were obtained in the same temperature interval. The results show that the nanocomposites cannot be simply described as containing superparamagnetic particles undergoing an anisotropy-driven blocking and that collective magnetic interactions play a non-negligible role. Low-temperature hysteretic properties indicate that the polymeric matrix affects the effective anisotropy of magnetite nanoparticles. Dispersion of magnetite NPs in PEGDA has non-trivial consequences on their magnetic properties.     

Mössbauer study of a Fe3O4/PMMA nanocomposite synthesized by sonochemistry

Magnetite nanoparticles of 10 nm average size were synthesized by ultrasonic waves from the chemical reaction and precipitation of ferrous and ferric iron chloride (FeCl₃ · 6H₂O y FeCl₂ · 4H₂O) in a basic medium. The formation and the incorporation of the magnetite in PMMA were followed by XRD and Mössbauer Spectroscopy. These magnetite nanoparticles were subsequently incorporated into the polymer by ultrasonic waves in order to obtain the final sample of 5 % weight Fe₃O₄ into the polymethylmethacrylate (PMMA). Both samples Fe₃O₄ nanoparticles and 5 % Fe₃O₄/PMMA nanocomposite, were studied by Mössbauer spectroscopy in the temperature range of 300 K–77 K. In the case of room temperature, the Mössbauer spectrum of the Fe₃O₄ nanoparticles sample was fitted with two magnetic histograms, one corresponding to the tetrahedral sites (Fe^3?+?) and the other to the octahedral sites (Fe^3?+? and Fe^2?+?), while the 5 % Fe₃O₄/PMMA sample was fitted with two histograms as before and a singlet subspectrum related to a superparamagnetic behavior, caused by the dispersion of the nanoparticles into the polymer. The 77 K Mössabuer spectra for both samples were fitted with five magnetic subspectra similar to the bulk magnetite and for the 5 % Fe₃O₄/PMMA sample it was needed to add also a superparamagnetic singlet. Additionally, a study of the Verwey transition has been done and it was observed a different behavior compared with that of bulk magnetite.     

Preparation of superparamagnetic magnetite nanoparticles by reverse precipitation method: Contribution of sonochemically generated oxidants

Magnetic iron oxide nanoparticles were successfully prepared by a novel reverse precipitation method with the irradiation of ultrasound. TEM, XRD and SQUID analyses showed that the formed particles were magnetite (Fe₃O₄) with about 10 nm in their diameter. The magnetite nanoparticles exhibited superparamagnetism above 200 K, and the saturation magnetization was 32.8 emu/g at 300 K. The sizes and size distributions could be controlled by the feeding conditions of FeSO₄ · 7H₂O aqueous solution, and slower feeding rate and lower concentration lead to smaller and more uniform magnetite nanoparticles. The mechanisms of sonochemical oxidation were also discussed. The analyses of sonochemically produced oxidants in the presence of various gases suggested that besides sonochemically formed hydrogen peroxide, nitrite and nitrate ions contributed to Fe(II) ion oxidation.     

Sonochemical synthesis of monodispersed magnetite nanoparticles by using an ethanol–water mixed solvent

The magnetite nanoparticles were synthesized in an ethanol–water solution under ultrasonic irradiation from a Fe(OH)₂ precipitate. XRD, TEM, TG, IR, VSM and UV/vis absorption spectrum were used to characterize the magnetite nanoparticles. It was found that the formation of magnetite was accelerated in ethanol–water solution in the presence of ultrasonic irradiation, whereas, it was limited in ethanol–water solution under mechanical stirring. The monodispersibility of magnetite particles was improved significantly through the sonochemical synthesis in ethanol–water solution. The magnetic properties were improved for the samples synthesized under ultrasonic irradiation. This would be attributed to high Fe²⁺ concentration in the magnetite cubic structure.     

Preparation of magnetic latexes functionalized with chloromethyl groups via emulsifier-free miniemulsion polymerization

Functionalized crosslinked polystyrene-co-divinylbenzene-co-chloromethylstyrene magnetic latex particles were prepared via emulsifier-free miniemulsion polymerization using 2, 2′ azobis (2-amidinopropane) dihydrochloride (V-50) as an initiator and in the presence of magnetite nanoparticles in the monomers. Transmission electron microscopy (TEM) proved the presence of magnetite nanoparticles in polymer particles. Differential scanning calorimetery (DSC) analysis of the product showed an exothermic signal due to crosslinking of chains through electrophilic aromatic substitution of phenyl groups with chloromethyl groups in the presence of the dispersed Fe₃O₄ as Lewis acid. This was proven by thermogravimetric analysis (TGA) via the loss of gaseous HCl. The results were also compared with those of magnetite-free miniemulsion polymerization using V-50.     

Mössbauer spectroscopy and proton relaxometry study of magnetite nanoparticles designed for preparing diagnostic contrast media

Mössbauer spectroscopy, proton relaxometry, and transmission electron microscopy are used to study magnetite nanoparticles designed for creating diagnostic contrast media. Superparamagnetic magnetite nanoparticles with a size of 5–7 nm and blocking temperature of T _b = 50 K are examined as a component of diagnostic contrast media with relaxation times T ₁ and T ₂ capable of circulating in the bloodstream for a long time. Larger ferrimagnetic nanoparticles (30–40 nm) can be concentrated in pathological tissues by applying an external magnetic field, thereby providing a means for hyperthermia.     

Synthesis and characterization of magnetite nanopowders

We have synthesized the iron oxide nanoparticles using the newly developed mechanical ultrasonication method with the FeSO₄ · 7H₂O. We have also investigated the crystallographic structural properties, morphology, and magnetic properties of the nanopowders. According to the high resolution X-ray diffraction result, the as-synthesized iron oxide nanoparticles were magnetite (Fe₃O₄). The particle size of the magnetite nanoparticles was about 6 nm confirmed by transmission electron microscopy image. The particle shape was almost a sphere confirmed by scanning electron microscopy image. The coercivity and saturation magnetization of the as-synthesized iron oxide nanopowders were 114 Oe, and 3.7 emu/g, respectively.     

Preparation of monodisperse magnetite nanoparticles under mild conditions

In this paper, we reported a method to prepare monodisperse magnetite nanoparticles at mild temperature using cheap and non-toxic precursors. It overcomes the shortages of chemical co-precipitation method and thermal decomposition method and combines the advantages of facile, cheap, large-scale, monodisperse, nanosize, and low synthesis temperature and low toxic. In this method, FeCl₃ · 6H₂O, FeCl₂ · 4H₂O and sodium oleate were mixed in toluene/ethanol/water mixture solvent and refluxed at 74 °C to prepare magnetite nanoparticles directly. The nanoparticles were characterized by transmission electron microscopy, dynamic light scattering, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer and thermogravimetric analysis. The magnetic properties of nanoparticles were measured by superconducting quantum interference device. The results showed that the nanoparticles are well-monodisperse with about 4–5 nm of average diameter. The nanoparticles were proved to be superparamagnetic with saturated magnetization 23.6 emu/g and blocking temperature 24.4 K. A possible formation mechanism of monodisperse magnetite nanoparticles was presented at the same time.     

Applications of polymeric micelles with tumor targeted in chemotherapy

The chitosan-coated magnetic nanoparticles (CS MNPs) were in situ synthesized by cross-linking method. In this method; during the adsorption of cationic chitosan molecules onto the surface of anionic magnetic nanoparticles (MNPs) with electrostatic interactions, tripolyphosphate (TPP) is added for ionic cross-linking of the chitosan molecules with each other. The characterization of synthesized nanoparticles was performed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS/ESCA), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), dynamic light scattering (DLS), thermal gravimetric analysis (TGA), and vibrating sample magnetometry (VSM) analyses. The XRD and XPS analyses proved that the synthesized iron oxide was magnetite (Fe₃O₄). The layer of chitosan on the magnetite surface was confirmed by FTIR. TEM results demonstrated a spherical morphology. In the synthesis, at higher NH₄OH concentrations, smaller sized nanoparticles were obtained. The average diameters were generally between 2 and 8?nm for CS MNPs in TEM and between 58 and 103?nm in DLS. The average diameters of bare MNPs were found as around 18?nm both in TEM and DLS. TGA results indicated that the chitosan content of CS MNPs were between 15 and 23?% by weight. Bare and CS MNPs were superparamagnetic. These nanoparticles were found non-cytotoxic on cancer cell lines (SiHa, HeLa). The synthesized MNPs have many potential applications in biomedicine including targeted drug delivery, magnetic resonance imaging?(MRI), and magnetic hyperthermia.     

Preparation of magnetite aqueous dispersion for magnetic fluid hyperthermia

An aqueous magnetic suspension was prepared by dispersing amphiphilic co-polymer-coated monodispersed magnetite nanoparticles synthesized through thermal decomposition of iron acetylacetonate (Fe(acac)₃) in a mixture of oleic acid and oleylamine. The average diameter of narrow-size-distributed magnetite nanoparticles varied between 5 and 12 nm depending on the experimental parameters such as reaction temperature, metal salt concentration and oleic acid/oleylamine ratio. Though the as-synthesized particles were coated with oleate and were dispersible in organic solvent, their surfaces were modified using amphiphilic co-polymers composed of poly(maleic anhydride-alt-1-octadecene) and polyethylene glycol-methyl ether and made dispersible in water. Infrared spectra of the sample indicated the existence of −COOH groups on the surface for further conjugation with biomolecules for targeted cancer therapy.     

Preparation of poly(styrene-glucidylmethacrylate)/Fe3O4 composite microspheres with high magnetite contents

Magnetic polymer composite microspheres with high magnetite contents were prepared by dispersion polymerization of styrene (St) and glucidylmethacrylate (GMA), in which Fe₃O₄ nanoparticles were co-stabilized by oleic acid and silane surfactants. The microstructure of the composite microspheres was characterized by Fourier transform infrared (FTIR) spectrometry, X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results demonstrated the presence of a hybrid morphology with organic polymer-encapsulated inorganic particles. Subsequently, thermogravimetric analysis (TGA) and vibrating sample magnetometry (VSM) were used to evaluate the magnetite content of the microspheres. It was found that an accordant magnetite content of about 70 wt%, could be obtained for the magnetic polymer microspheres, a value significantly higher than those reported thus far. The possible mechanism for the formation of the microspheres was proposed.