Features of magnetization reversal in trilayer nanostructures

The process of magnetization reversal in an ultrathin magnetic trilayer is analyzed. It is shown that the shape of magnetization hysteresis loops and the giant magnetoresistance essentially depend on the relative magnitudes of magnetic parameters of the top and bottom layers. Hysteresis loops are found for characteristic relative magnitudes of the parameters. Analysis is performed of the dependence of the shape of hysteresis loops on the magnitude of interlayer exchange. A phase diagram is constructed, which determines the regions of existence of characteristic hysteresis loops for different relative magnitudes of the uniaxial anisotropy constant and exchange constant J ₁.     

Study of the magnetic interaction in nanocrystalline Pr-Fe-Co-Nb-B permanent magnets

The magnetic properties of an isotropic, epoxy resin bonded magnets made from Pr-Fe-Co-Nb-B powder were investigated. The magnetization reversal process and magnetic parameters were examined by measurements of the initial magnetization curve, major and minor hysteresis loops and sets of recoil curves. From the initial magnetization curve and the field dependencies of the reversible and irreversible magnetization components derived from the recoil loops it was found that the magnetization reversal process is the combination of the nucleation of reversed domains and pinning of domain walls at the grain boundaries and the reversible rotation of magnetization vector in single domain grains. The interactions between grains were studied by means of δM plots. The nonlinear behavior of δM curve approve that the short range intergrain exchange coupling interactions are dominant in a field up to the sample coercivity.The interaction domains and fine magnetic structure were revealed as the evidence of exchange coupling between soft α-Fe and hard magnetic Nd₂Fe₁₄B grains.     

Magnetization reversal in granular thin films

The paper discusses the physics of magnetization reversal in granular magnetic films. It gives an overview of the key physical properties that determine the collective and macroscopically observable magnetization reversal behavior. In particular, the multitude of observable hysteresis loops is reduced to three key physical quantities, namely the single grain switching field distribution D(h_s), the inter-granular exchange coupling constant J_ex, and the magnetostatic interaction constant J_ms. By varying the relative influence of these quantities, many different shapes of hysteresis loops can occur, which is documented by experimental examples. The regime of partially and strongly correlated reversal is discussed in detail, and minor loop measurements are presented that show scaling behavior for strongly correlated magnetization reversal in the vicinity of hysteresis loop criticality.     

Effect of crystallization annealing under loading on the magnetic properties and the structure of a soft magnetic FeSiNbCuB alloy doped with chromium

The changes of quasi-static magnetic hysteresis loops and X-ray diffraction patterns of the Fe_73.5Si_13.5B₉Nb₃Cu₁ doped to 10 at % chromium instead of iron have been studied to elucidate the influence of the thermomechanical treatment consisting of annealing and cooling of the alloy under the tensile stress (tensile-stress annealing (TSA)) on the magnetic properties and the structure of these alloys. It is shown that the treatment results in the induction of the magnetic anisotropy of the hard axis type at which the magnetization reversal along the direction of applying the external stress during annealing is hampered. The energy of the induced magnetic anisotropy decreases as the chromium content increases. During TSA, the nanocrystal lattices are deformed, and the deformation is retained after cooling. The interplanar spacings increase along the extension direction and decrease in the transverse direction. The deformation anisotropy is observed for crystallographic directions. The anisotropic deformation of the bcc lattice of nanocrystals with high content of the ordered Fe₃Si phase characterized by a negative magnetoelastic interaction is the cause of formation of the state with the transverse magnetic anisotropy of the hard axis type.     

Bending effects and temperature dependence of magnetic properties in a Fe-rich amorphous wire

Amorphous wires with composition Fe_77.5Si_7.5B₁₅ exhibit a very peculiar magnetization process characterized by a single and quite large Barkhausen jump. This gives rise to a squared hysteresis loop at a critical magnetic field. The bistable behaviour, widely studied in wires with typical length of 10 cm and diameter of 125 μm, appears above a length of about 7 cm in straight wires and disappears for curvature radius within the range 2–12 cm in bent wires. In this work it is shown that bistability occurs in bent wires, whatever their curvature is, provided the wires are long enough. To this purpose spiral-shaped samples with several turns are considered. However, when the wire length is not a integer number of turns the magnetization reverses through many large Barkhausen jumps. In this condition, varying the measuring temperature can activate the energy barriers for the jumps.     

Exchange bias with Fe substitution in LaMnO<Subscript>3</Subscript>

We observe the negative shift of the magnetic hysteresis loop at 5 K, while the sample is cooled in external magnetic field in case of 30% of Fe substitution in LaMnO₃. The negative shift and training effect of the hysteresis loops indicate the phenomenon of exchange bias. The cooling field dependence of the negative shift increases with the cooling field below 7.0 kOe and then, decreases with further increase of cooling field. The temperature dependence of the negative shift of the hysteresis loops exhibits that the negative shift decreases sharply with increasing temperature and vanishes above 20 K. Temperature dependence of dc magnetization and ac susceptibility measurements show a sharp peak (T_p) at 51 K and a shoulder (T_f) around 20 K. The relaxation of magnetization shows the ferromagnetic and glassy magnetic components in the relaxation process, which is in consistent with the cluster-glass compound.     

The Analysis of Large Barkhausen Effect in the FeSiB Amorphous Wire

Amorphous FeSiB wires with positive magnetostriction are very perspective soft magnetic materials for many applications, e.g. torque, field or current sensors, pulse generators and highly sensitive magnetometers. The appearance of the Large Barkhausen Effect (LBE) during slow magnetization of FeSiB wires is described by means of the core-shell model assuming a residual radial tensile stresses in the as-cast state. In this work, the LBE during magnetization reversal of Fe_77.5Si_7.5B₁₅ amorphous wire in the as-cast state was analysed. We have studied the kinetics of the reverse domain in the core region of the wire by means of Sixtus-Tonks method of two small pick-up coils placed in an asymmetric way with respect to the ends of the wire. We estimated the velocity of the reverse domain wall and the core region volume of the wire. It was found that the residual radial tensile stress distribution of the shell region strongly influences the magnetization reversal in the FeSiB wire.     

Sm2(TM)17合金的磁性(自旋再取向相变)研究

本文研究了Sm₂(FeNiCoM)₁₇合金(M为非磁性组元)的磁性。样品由六角结构无序型的2∶17主相及少量FeNi合金杂相组成。在六角结构的e轴方向(易磁化方向)观察到下述异常现象:低温(273K以下)时的磁化及反磁化曲线发生明显的跃变,跃变时相应的磁场H_r随温度下降而增大;磁滞迴线是蜂腰型的,温度愈低蜂腰愈明显;升温时磁化强度随温度变化(1.5K至居里点T_C)的曲线上出现极大值,其相应的温度T_t随磁场增大而降低;降温时观察到了热磁滞后现象。但在基面(难磁化方向)上及Co含量增多(>18at％)时,样品却表现了正常的铁磁行为。本文提出用磁矩非共线结构排列的自旋再取向相变来解释上述异常现象,并给出自旋倒向所需越过的能垒高度U=9.2×10^-15erg,用设想磁结构的模型得到的磁化强度的计算值与实验值也符合得较好。 关键词：     

Domain wall dynamics and Hall effect in eddy current loop in amorphous ferromagnetic wire with small helical anisotropy

Small helical anisotropy was induced in amorphous ferromagnetic Co_68.2Fe_4.3Si_12.5B₁₅ wire by current annealing and simultaneous application of tensile stress and torsion. Presence of helical anisotropy was confirmed by measurement and analysis of the circular magnetic flux versus axial magnetic field hysteresis loops. These measurements also showed that a single domain wall between circular domains can be created by placing the wire in a sufficiently high inhomogeneous magnetic field generated by Helmholtz coils with opposite currents. The domain wall velocity versus axial driving field was measured. The results show that the basic dynamic properties (magnitude of the wall mobility, field interval in which linear dependencies between velocity and field are observed, accelerated increase of the velocity for higher fields) are very similar to those obtained for the domain wall between circular domains driven by a constant circular field. The Hall effect was detected in the eddy current loop generated by the moving domain wall.     

Analysis of exchange bias effect of NiO+NiFe2O4 composites

Exchange bias (EB) and magnetic properties of ferrimagnetic (FI) NiFe₂O₄ and antiferromagnetic (AFM) NiO bulk composites, prepared by a chemical co-precipitation and post-thermal decomposition method from Fe-doped NiO matrix, have been investigated. Enhanced coercivities and shifted hysteresis loops are still observed for these samples after field cooling. But the vertical magnetization shifts are not observed. In comparison with the bulk samples, a NiO/10% NiFe₂O₄ nanocomposite was also prepared via direct mixture, in which both the horizontal and vertical shift in the hysteresis loops are observed at 10 K. The observed phenomena are explained in terms of interfacial exchange interaction between the two phases and the finite-size effect, respectively.     

Sol-gel derived nanoparticles of Zn substituted lithium ferrite (Li0.32Zn0.36Fe2.32O4): magnetic and Mössbauer effect measurements and their theoretical analysis

Nanoparticles of Zn substituted lithium ferrite (Li_0.32Zn_0.36Fe_2.32O₄) have been prepared by a sol-gel method where the ultra-sonication technique has been adopted to reduce the agglomeration effect among the nanoparticles. The samples were heat-treated at three different temperatures and the formation of the nanocrystalline phase was confirmed by X-ray diffractograms (XRD). The average particle size of each sample has been estimated from the (311) peak of the XRD pattern using the Debye-Scherrer formula and the average sizes are in the range of 10-21 nm. The average particle size, crystallographic phase, etc. of some selected samples obtained from the high-resolution transmission electron microscopy are in agreement with those estimated from the XRD patterns. Static magnetic measurements viz., hysteresis loops, field cooled and zero field cooled magnetization versus temperature curves of some samples carried out by SQUID in the temperature range of 300 to 5 K clearly indicate the presence of superparamagnetic (SPM) relaxation of the nanoparticles in the samples. The maximum magnetization of the SPM sample annealed at 500 °C is quite high (68 Am²/Kg) and the hysteresis loops are almost square shaped with very low value of coercive field at room temperature (827.8 A/m). The particle size, magneto-crystalline anisotropy, etc. have been estimated from the detailed theoretical analysis of the static magnetic data. The dynamic magnetic behavior of the samples was also investigated by observing the ac hysteresis loops and magnetization versus field curves with different time windows at room temperatures. The different soft magnetic quantities viz., coercive field, magnetization, remanance, hysteresis losses, etc. were extracted from dynamic measurements. Dynamic measurements confirmed that the samples are in their mixed state of SPM and ordered ferrimagnetic particles, which is in good agreement with the results of static magnetic measurements. Mössbauer spectra of the samples recorded at room temperature (300 K) and at different temperatures down to 20 K confirmed the presence of the SPM relaxation of the nanoparticles of the samples.     

Dynamical properties of magnetization reversal in an ultrathin AuCo film

We present a dynamical study of hysteresis loops of a MoS₂/[Au/Co/Au] sandwich performed by surface magneto-optical Kerr effect with a field variation rate up to 1.2 MOe/s. An interpretation of dynamical effects at room temperature is proposed, using a modelization of the magnetization reversal. We discuss simulations which describe two different processes of the magnetization reversal to interpret the evolution of the hysteresis loops for several rates of variation of the magnetic field. For a first range of field variation rates lower than 180 kOe/s, the predominant mechanism seems to be wall motion and beyond 180 kOe/s, an expression for the magnetization is given, which supposes micro-domains reversal as a prevailing process. Finally, the general behaviour of the relaxation time, depending on the magnetic field, is investigated.     

Magnetization reversal in Co x (PZT)100 − x ferromagnet-ferroelectric nanogranulated composites

The process of magnetization reversal in Co _x (PZT)_{100 − x} composites is studied experimentally. At room temperature, the ferromagnetic state in as-prepared samples is found to arise only if the composite contains more than 60 at % of the metal phase. The concentration dependences of the coercive force and remanent magnetization derived from magnetic hysteresis loops are discussed in terms of the random anisotropy model.     

Mössbauer and magnetic study of mechanical alloying of Fe3Si

Using Mössbauer spectroscopy and measurement of hysteresis loops and thermomagnetic curves, phase composition and magnetic parameters of Fe₃Si mechanically alloyed powders were studied in dependence on milling time and subsequent heat treatment at a thermomagnetic experiment. Samples of as-prepared powders show high value of coercivity, the saturation magnetization and the content of amorphous Fe₃Si phase raise with increasing time of milling, the content of α-Fe diminishes. Heat treatment of samples with long enough milling time can produce almost perfect Fe₃Si alloy.     

3D calculation of hysteresis loops,magnetic orientations and reversal processes for exchange-spring bilayers with perpendicular anisotropy

Hysteresis loops and magnetic reversal processes have been determined by a three dimensional (3D) micromagnetic model for exchange-coupled Nd₂Fe₁₄B/α-Fe bilayers and carefully compared with a popular one-dimensional (1D) micromagnetic model. It is found that the calculated hysteresis loops, the critical fields and the magnetic phase diagrams agree well with the results given by the 1D model. However, the calculated nucleation mode is a quasi-curling one where the magnetic moment exhibits a curling in the film plane and varies in the thickness direction, in contrast with the reported quasi-coherent mode. The calculated spatial distribution of the magnetization orientation in the thickness direction at various applied fields signifies a three-step magnetic reversal process, which includes nucleation, growth and displacement of the domain wall as well as the rotation and the reversal of magnetization in the hard phase. The magnetic reversal of the hard phase is much slower than that given by the 1D model, leading to a more slant hysteresis loop near the coercivity point.     

Magnetic hysteresis loops in molecular-based magnetic materials AFeFe(C2O4)3

A molecular-based magnetic material AFe^IIFe^III(C₂O₄)₃ (A = organic cation) with a honeycomb structure is studied. The molecular-based magnet system consists of mixed spin-2 and spin- 5/2 honeycomb lattices with ferrimagnetic interlayer coupling. The magnetization, hysteresis loops and initial susceptibility have been calculated using a numerical method which includes both the longitudinal and transverse fields. We investigated the magnetic reversal of the system and found the existence of triple hysteresis loop patterns, affected by the anisotropy, longitudinal and transverse fields, and interlayer and intralayer exchange.     

Zero—field—cooled and field—cooled magnetizations and magnetic susceptibility of itinerant ferromagnet SrRuO3

Zero-field-cooled(ZFC) magnetization,field-cooled(FC) magnetization,ac magnetic susceptibility and major hysteresis loops of itinerant ferromagnet SrRuO3 have been measured at magnetic ordering temperatures ranging from 5 to 160K.An empirical model is proposed to calculate the measured ZFC magnetization.The result indicates that the calculated ZFC magnetization compares well with the measured one.Based on the generalized Preisach model.both the ZFC and FC curves are reproduced by numerical simulations.The critical temperature and critical exponents are determined by measuring the ac magnetic susceptibility in different bias magnetic fields at temperatures in the vicinity of the point of phase transition.     

Tb0.3Dy0.7Fe2合金磁畴偏转的滞回特性研究

研究了不同载荷作用下Tb_0.3Dy_0.7Fe₂合金在压磁和磁弹性效应中磁畴偏转的滞回特性. 基于Stoner-Wolhfarth模型的能量极小原理, 采用绘制自由能-磁畴偏转角度关系曲线的求解方法, 研究了压磁和磁弹性效应中载荷作用下的磁畴角度偏转和磁化过程, 计算分析了不同载荷作用下磁畴偏转的滞回特性. 研究表明, 压磁和磁弹性效应中磁畴偏转均存在明显的滞回、跃迁效应, 其中磁化强度的滞回效应来源于磁畴偏转的角度跃迁; 压磁效应中预加磁场的施加将增大磁化强度的滞回, 同时使滞回曲线向大压应力方向偏移; 磁弹性效应中磁畴偏转的滞回存在两个临界磁场强度, 不同磁场强度下合金具有不同的磁畴偏转路径和磁化滞回曲线, 临界磁场强度的大小取决于预压应力的施加. 理论分析对类磁致伸缩材料磁畴偏转模型的完善和材料器件的设计应用非常有意义.     

Implications of nanoparticle concentration and size distribution in the superparamagnetic behaviour of aging-improved maghemite xerogels

Evolution of static magnetic properties of a set of enhanced γ-Fe₂O₃/SiO₂ nanocomposites with different iron concentration has been studied on the basis of their corresponding hysteresis loops, zero-field/field-cooled (ZFC/FC) magnetization curves and transmission electron microscopy images. The lack of coercivity in all compositions, as well as the fulfillment of the H/T scaling law by the magnetization above the blocking temperature of each system under study, evidence a superparamagnetic behaviour in the iron oxide nanoparticles. In order to study the influence of iron content in the unblocking processes of nanoparticles, ZFC curves under different applied magnetic fields have been fitted to a model considering the systems under study as a distribution of energy barriers. Depart from the superparamagnetic model is discussed considering interparticle interactions.     

Study of surface magnetic properties in Co-rich amorphous microwires

Magneto-optical investigations carried out on a Co-rich glass-covered amorphous microwire is presented. The appearance of circular magnetic bistability and the influence of tensile stress and high-frequency electric current on the surface magnetization reversal have been studied. The change of the mechanism of the magnetization reversal induced by the high-frequency electric current is also discussed.