Synthese und Strukturanalyse von Na3SbSe3·3Sb2O3·0,5Sb(OH)3

Investigations in the system Sb-Se-NaOH-H₂O, hydrothermal conditions, yielded crystals of the compound Na₃SbSe₃·3Sb₂O₃·0,5Sb(OH)₃. The structure of this compound (a=14.40 Å,c=5.568 Å; space group P 6₃-C ₆ ⁶ ;Z=2) was determined from 985 independent X-ray intensities — collected on an automaticWeissenberg type diffractometer — by thePatterson method and refined by the least squares method toR=8.3% (with -weighting 5.9%). The structure consists of SbO₃ pyramids which are connected via common oxygen corners to tubes parallel [001]. These tubes and SbSe₃ pyramids are combined by Na atoms to a framework. The Sb(OH)₃ groups are statistically located within the channels of the tubes.

     

Comparison of the crystal structures of Co2(X 2O7)·2H2O,X=P and As

Summary Crystals of Co₂(X ₂O₇)·2H₂O,X=P/As were synthesized under hydrothermal conditions. Their crystal structures were determined by single crystal X-ray diffraction:a=6.334(1)/6.531(2),b=13.997(2)/14.206(4),c=7.637(1)/7.615(2)Å, =94.77(2)/94.74(2)°, space group P2₁/n,R=0.032/0.046,R _w=0.028/0.034 for 2423/2042 reflections and 131/119 variables. Within the twoXO₄ tetrahedra connected via a common corner to anX ₂O₇ group the average P-O bond lengths are approximately equal (1.540 and 1.543 Å), but As-O differs significantly (1.685 and 1.696 Å). A comparison with the isotypic Mn and Mg pyrophosphates shows a correlation between the ratio Me-O/X-O and the angle O-X-O.

---

Vergleich der Kristallstrukturen von Co₂(X ₂O₇)·2H₂O,X=P und As

Zusammenfassung Kristalle von Co₂(X ₂O₇)·2H₂O,X=P/As wurden unter Hydrothermalbedingungen synthetisiert. Ihre Kristallstrukturen wurden mittels Röntgenbeugung an Einkristallen bestimmt:a=6.334(1)/6.531(2),b=13.997(2)/14.206(4),c=7.637(1)/7.615(2) Å, =94.77(2)/97.74(2)°, Raumgruppe P2₁/n,R=0.032/0.046,R _w=0.028/0.034 für 2423/2042 Reflexe und 131/119 Variable. In den beiden über eine gemeinsame Ecke zuX ₂O₇-Gruppen verknüpftenXO₄-Tetraedern sind die mittleren P-O-Abstände ungefähr gleich (1.540 und 1.543 Å), hingegen differiert As-O signifikant (1.685 und 1.696 Å). Ein Vergleich mit den isotypen Mn- und Mg-Pyrophosphaten zeigt eine Korrelation zwischen dem Quotienten Me-O/X-O und dem WinkelX-O-X.

     

The crystal structure of Fe(SeO2OH)(SeO4)·H2O

Summary The crystal structure of the hydrothermally synthesized compound Fe(SeO₂OH) (SeO₄) · H₂O was determined by single crystal diffraction methods:a=8.355(2) Å,b=8.696(2) Å,c=9.255(2) Å, =93.72(1)°,V=670.95 ų;Z=4, space group P2₁/c,R=0.029,R _w=0.027 for 2430 independent reflections (sin /0.76 Å^–1). Isolated FeO₅(H₂O)-octahedra share five corners with [SeO₂OH] and [SeO₄] groups to form sheets parallel to (100). These sheets are interconnected via hydrogen bonds only.

---

Die Kristallstruktur von Fe(SeO₂OH)(SeO₄)·H₂O

Zusammenfassung Die Kristallstruktur der hydrothermal dargestellten Verbindung Fe(SeO₂OH) (SeO₄)·H₂O wurde mittels Einkristallbeugungsmethoden bestimmt:a=8.355(2) Å,b=8.696(2) Å,c=9.255(2) Å, =93.72(1)°,V=670.95 ų;Z=4, Raumgruppe P2₁/c,R=0.029,R _w=0.027 für 2 430 unabhängige Reflexe (sin / 0.76 Å^–1). Isolierte FeO₅(H₂O)-Oktaeder teilen fünf Ecken mit [SeO₂OH]- und [SeO₄]-Gruppen, wobei sie Schichten parallel (100) bilden. Diese Schichten sind nur über Wasserstoffbrücken miteinander verbunden.

     

Crystal structures of Co3(SeO3)3·H2O and Ni3(SeO3)3·H2O,two new isotypic compounds

Summary The crystal structures of the new, hydrothermally synthesized, isotypic compounds Co₃(SeO₃)₃·H₂O and Ni₃(SeO₃)₃·H₂O were determined by direct and Fourier methods and refined toR _w=0.023, 0.032 using single crystal X-ray data up to sin/=0.81 Å^–1 [space group P ,a=8.102 (2), 7.986 (3) Å;b=8.219 (2), 8.133 (3) Å;c=8.572 (2), 8.422 (3) Å, =69.15 (1), 69.50 (1)°; =62.88 (1), 62.50 (1)°; =67.23 (1), 67.64 (1)°;Z=2]. The structures are built up from [Me ₅(SeO₃)₆·2H₂O]^2– sheets containing three crystallographically different types of octahedrally coordinatedMe ²⁺ and trigonal pyramidal coordinated Se⁴⁺ atoms, respectively. These sheets are linked only by a fourth type ofMe ^2+[6] atom. All coordination polyhedra deviate significantly from their ideal shapes, bond lengths within the extremly distortedMe(4)O₆ polyhedra range from 1.983 (2) Å to 2.403 (2) Å in Co₃(SeO₃)₃·H₂O and from 1.987 (4) Å to 2.301 (3) Å in the Ni compound, O-Se-O bond angles were found between 92.8 (2)° and 104.9 (1)°. Hydrogen bond lengths are 2.802 (3)Å and 2.600 (4)Å in the Co compound, and 2.762 (6) Å and 2.561 (6) Å in Ni₃(SeO₃)₃·H₂O. The latter is one of the shortest known hydrogen bonds donated by a water molecule.

---

Die Kristallstrukturen von Co₃(SeO₃)₃·H₂O und Ni₃(SeO₃)₃·H₂O, zwei neue isotype Verbindungen

Zusammenfassung Die Kristallstrukturen der neuen, hydrothermal synthetisierten, isotypen Verbindungen Co₃(SeO₃)₃·H₂O und Ni₃(SeO₃)₃·H₂O wurden mit direkten und Fourier-Methoden bestimmt und unter Verwendung von Einkristallröntgendaten bis sin/=0.81 Å^–1 aufR _w-Werte von 0.023, 0.032 verfeinert [Raumgruppe P ,a=8.102 (2), 7.986 (3) Å;b=8.219 (2), 8.133 (3) Å;c=8.572 (2), 8.422 (3) Å, =69.15 (1), 69.50 (1)°; =62.88 (1), 62.50 (1)°; =67.23 (1), 67.64 (1)°;Z=2]. Die Strukturen werden von [Me ₅(SeO₃)₆·2H₂O]^2– Schichten aufgebaut, die je drei kristallographisch unterschiedliche Arten von oktaedrisch koordiniertenMe ²⁺ und trigonal pyramidal koordinierten Se⁴⁺ Atomen enthalten. Diese Schichten sind nur durch eine vierte Art vonMe ^2+[6] Atomen verknüpft. Alle Koordinationspolyeder weichen deutlich von ihren Idealformen ab, Bindungslängen in den extrem verzerrtenMe(4)O₆ Polyedern variieren zwischen 1.983 (2) Å und 2.403 (2) Å in Co₃(SeO₃)₃·H₂O und zwischen 1.987 (4) Å und 2.301 (3) Å in der Ni-Verbindung, O-Se-O-Bindungswinkel liegen zwischen 92.8 (2)° und 104.9 (1)°. Wasserstoffbrückenlängen sind 2.802 (3) Å und 2.600 (4) Å in der Co-Verbindung, und 2.762 (6) Å und 2.561 (6) Å in Ni₃(SeO₃)₃·H₂O. Letztere ist eine der kürzesten bekannten Wasserstoffbrücken eines Wassermoleküls.

     

On the modulation of electron energy distribution function in radiofrequency SiH4, SiH4−H2 bulk plasmas

Electron energy distribution functions (EDF) in SiH₄, SiH₄–H₂ radiofrequency discharges have been calculated by solving the time-dependent Boltzmann equation in the presence of a sinusoidal field. Particular emphasis is given to the modulation of EDF as a function of the applied frequency (·10⁶/p ₀ ·10⁸ sec^–1 torr^–1) and of gas composition. The results show that at /p ₀ = ·10⁶ sec^–1 torr^–1 EDF follows in a quasistationary mode the variation of the field with the exception of a small range of electric field near to the zero crossing. Still, at the higher considered frequency (/p ₀ =·10⁸ sec^–1 torr^–1), we observe some modulation of EDF. The necessity of using a time-dependent approach is tested by comparing the present results with the corresponding ones obtained by using the effective field approximation (i.e., the approximation which solves instead of the time-dependent Boltzmann equation the corresponding stationary one at the effective values of the rf field). The two sets of results can differ by orders of magnitude in the tail of EDF, the differences decreasing with increasing molar fraction of H₂ and increasing field frequency. The role of excited states (second-kind collisions) is studied by inserting in the Boltzmann equation given concentrations of vibrational and electronic states. The results show that second-kind collisions strongly affect EDF especially in pure silane. Finally a satisfactory agreement has been found between theoretical and experimental results concerning the modulation of electrons of given energy in pure silane discharges.     

Phase equilibria in the Ag4SSe-SnTe system

The phase diagram of the system Ag₄SSe-SnTe is studied by means of X-ray diffraction, differential thermal and metallographic analyses and measurements of the microhardness and the density of the material. This diagram is divided into two eutectic-type subdiagrams by the composition Ag₄SSe·2SnTe. The unit-cell parameters of the intermediate phases 3Ag₄SSe·SnTe (phase A) and -Ag₄SSe·2SnTe (phase B) are determined as follows: for phase A: a=0.7851 nm, b=0.7196 nm, c=0.6296 nm, =101.32°, =85.90°, =111.36°; for phase B: a=0.3662 nm, b=0.3303 nm, c=0.3343 nm, =90.74°, =108.94°, =91.91°. The phase Ag4SSe·2SnTe melts congruently at 615°C and a polymorphic transition of the phase takes place at T _- =110°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

Planar and tubular perovskite-type membrane reactors for the partial oxidation of methane to syngas

Dense planar and tubular oxygen separation membranes of La_0.6Ca_0.4Fe_0.75Co_0.25O_3– were investigated as reactors for the partial oxidation (POX) of methane to syngas. Their permeation properties were measured in an air/argon pO₂ gradient as a function of temperature. At 900 °C, the oxygen flux through a 1.26-mm-thick membrane was 0.075 mol/cm²·s and through a 0.25-mm-thick tube, 0.24 mol/cm²·s.For the POX measurements, a catalyst was added to the membrane and methane was introduced on the argon side. This resulted in a gradual increase of the oxygen flux with increasing concentration of methane, reaching 2 mol/cm²·s at 900 °C with pure methane. For the planar reactor, the CO selectivity reached 99% and the CH₄ conversion 75% at 918 °C with pure methane. For the tubular reactor, the CO selectivity and CH₄ conversion were 83 and 99%, respectively, under the same conditions. After 1,400 h of operation in a tubular POX reactor, the membrane was examined revealing phase demixing and local decomposition.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

On the crystal chemistry of three copper(II)-arsenates: Cu3(AsO4)2-III,Na4Cu(AsO4)2, and KCu4(AsO4)3

The three copper(II)-arsenates were synthesized under hydrothermal conditions; their crystal structures were determined by single-crystal X-ray diffraction methods:Cu₃(AsO₄)₂-III:a=5.046(2) Å,b=5.417(2) Å,c=6.354(2) Å, =70.61(2)°, =86.52(2)°, =68.43(2)°,Z=1, space group ,R=0.035 for 1674 reflections with sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a=4.882(2) Å,b=5.870(2) Å,c=6.958(3) Å, =98.51(2)°, =90.76(2)°, =105.97(2)°,Z=1, space group ,R=0.028 for 2157 reflections with sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a=12.234(5) Å,b=12.438(5) Å,c=7.307(3) Å, =118.17(2)°,Z=4, space group C2/c,R=0.029 for 1896 reflections with sin / 0.80 Å^–1.Within these three compounds the Cu atoms are square planar [4], tetragonal pyramidal [4+1], and tetragonal bipyramidal [4+2] coordinated by O atoms; an exception is the Cu(2)^[4+1] atom in Cu₃(AsO₄)₂-III: the coordination polyhedron is a representative for the transition from a tetragonal pyramid towards a trigonal bipyramid. In KCu₄(AsO₄)₃ the Cu(1)^[4]O₄ square and the As(1)O₄ tetrahedron share a common O—O edge of 2.428(5) Å, resulting in distortions of both the CuO₄ square and the AsO₄ tetrahedron. The two Na atoms in Na₄Cu(AsO₄)₂ are [6] coordinated, the K atom in KCu₄(AsO₄)₃ is [8] coordinated by O atoms.Die drei Kupfer(II)-Arsenate wurden unter Hydrothermalbedingungen gezüchtet und ihre Kristallstrukturen mittels Einkristall-Röntgenbeugungsmethoden ermittelt:Cu₃(AsO₄)₂-III:a = 5.046(2) Å,b = 5.417(2) Å,c = 6.354(2) Å, = 70.61 (2)°, = 86.52(2)°, = 68.43(2)°,Z = 1, Raumgruppe ,R = 0.035 für 1674 Reflexe mit sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a = 4.882(2) Å,b = 5.870(2) Å,c = 6.958(3) Å, = 98.51(2)°, = 90.76(2)°, = 105.97(2)°,Z = 1, Raumgruppe ,R = 0.028 für 2157 Reflexe mit sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a = 12.234(5) Å,b = 12.438(5) Å,c = 7.307(3) Å, = 118.17(2)°,Z = 4, Raumgruppe C2/c,R = 0.029 für 1896 Reflexe mit sin / 0.80 Å^–1.Die Cu-Atome in diesen drei Verbindungen sind durch O-Atome quadratisch planar [4], tetragonal pyramidal [4 + 1] und tetragonal dipyramidal [4 + 2]-koordiniert; eine Ausnahme ist das Cu(2)^{[4 + 1]}-Atom in Cu₃(AsO₄)₂-III: Das Koordinationspolyeder stellt einen Vertreter des Übergangs von einer tetragonalen Pyramide zu einer trigonalen Dipyramide dar. In KCu₄(AsO₄)₃ haben das Cu(1)^[4]O₄-Quadrat und das As(1)O₄-Tetraeder eine gemeinsame O—O-Kante von 2.428(5) Å, was eine Verzerrung der beiden Koordinationsfiguren CuO₄-Quadrat und AsO₄-Tetraeder bedingt. Die zwei Na-Atome in Na₄Cu(AsO₄)₃ sind durch O-Atome [6]-koordiniert, das K-Atom in KCu₄(AsO₄)₃ ist [8]-koordiniert.

---

Zur Kristallchemie dreier Kupfer (II)-Arsenate: Cu₃(AsO₄)₂-III, Na₄Cu(AsO₄)₂ und KCu₄(AsO₄)₃

     

Study of C60·2S8 by the methods of induced electron emission

It was shown by the methods of induced electron emission that a transfer of the electron density from C₆₀ molecules to the eight-membered ring of sulfur is characteristic of C₆₀·2S₈. The value of the (+)-plasmon energy for C₆₀·2S₈ is approximately 1 eV less than that for pure C₆₀. In a high vacuum, the C₆₀·2₈ surface is depleted in sulfur.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2149–2152, December, 1994.     

Additive telluromolybdates. Structure and catalysis in oxidation

Additive telluromolybdates, MoO₃·2TeO₂ and M^IIO·TeO₂·MoO₃ (M^IITeMoO₆; M^II = Co, Mn, Zn), converted ethyl lactate selectively to pyruvate in a vaporphase fixedbed flow system at 250–300 °C. A synergy in activity was observed for binary TeO₂–MoO₃, and crystalline Te₂MoO₇ was suggested as the active species. The Rietveld analysis of powder XRD patterns of ternary CoTeMoO₆ revealed the layer structure quite different from that of the reference Te₂MoO₇, but tellurium was again located adjacent to molybdenum linked through lattice oxygen.     

The thermal decomposition of (NH4)[VO(O2)2(NH3)]

The compound, (NH₄)[VO(O₂)₂(NH₃)], thermally decomposes to ammonium metavanadate, which then decomposes to vanadium pentoxide. Using a heating rate of 5 deg·min^–1, the first decomposition step occurs between 74° and 102°C. The transformation degree dependence of the activation energy (-E) is shown to follow a decreasing convex form, indicating that the first decomposition step is a complex reaction with a change in the limiting stage of the reaction. Infrared spectra indicated that the decomposition proceeds via the gradual reduction of the ratio of the (NH₄)₂O to V₂O₅ units from the original 11 ratio in ammonium metavanadate, which may be written as (NH₄)₂O·V₂O₅, to V₂O₅.The assistance of Professor A. M. Heyns (University of Pretoria) and Professor K. L. Range (University of Regensburg) is gratefully acknowledged as well as the financial assistance of the University of Pretoria and the FRD.     

Characterization of water-soluble,cationic polyelectrolytes as exemplified by poly(acrylamide-co-trimethylammoniumethylethacryate chloride) and the establishment of structure-property relationships

The cationic copolymerization products of poly (acrylamide-co-trimethylammoniumethylmethacrylate chloride (PTMAC) having cationic monomer percentages of 8%, 25%, and 50% as well as the cationic homopolymer, were characterized with respect to their molecular dimensions. The light-scattering and viscometric measurements were carried out for molecular weights ranging from 200 000 to 12 800 000 g/mol in 1 M NaCl solution at 25°C. It was possible to establish a relationship between the molecular weight and the two parameters: intrinsic viscosity and radius of gyration, for all four polymers.Rheological investigations of the flow properties in 1 M NaCl solution were also carried out using the polymer with a cationic monomer of 50% (PTMAC 50). Structure-property relationships were formulated which made it possible to describe and predict the shear viscosity, both in the zero-shear region (Newtonian region) and in the shear-dependent region (non-Newtonian region) as a function of the polymer concentration, the molecular weight, and shear rate.Abbreviations a exponent of the []-M relationship - A ₂ 2^nd virial coefficient/mol·cm³·g^–2 - AAm acrylamide - b slope of the flow-curve in the shear-rate dependent region - c concentration/g·cm^–3 - dn/dc refractive index increment/cm³·g^–1 - f function - K constant of the []-M relationship/cm³·g^t-1 - m _c proportion of cationic monomers/mol % - M molecular weight/g·mol^–1 - M _w weight-average molecular weight/g·mol^–1 - M _n number-average molecular weight/g·mol^–1 - NaCL sodium chloride - PAAm polyacrylamide - PS polystyrene - PTMAC poly(acrylamide-co-trimethylammoniumethylme thacrylate chloride) - R_G ^20.5 radius of gyration/nm - TMAC trimethylammoniumethylmethacrylate chloride - shear rate/s^–1 - critical shear rate/s^–1 - viscosity/Pa·s - 0 zero-shear viscosity/Pa·s - _s solvent viscosity/Pa·s - _sp specific viscosity - [] intrinsic viscosity/cm³·g^–1 - relaxation time/s     

An aqueous thermodynamic model for Ca2+−SO 3 2− ion interactions and the solubility product of crystalline CaSO3·1/2H2O

The solubility of CaSO₃·1/2H₂O(c) was studied under alkaline conditions (pH>8.2), in deaerated and deoxygenated Na₂SO₃ solutions ranging in concentration from 0.0002 to 0.4M and in CaCl₂ solutions ranging in concentration from 0.0002 to 0.01M, for equilibration periods ranging from 1 to 7 days. Equilibrium was approached from both the over- and the under-saturation directions. In all cases, equilibrium was reached in <1 days. The aqueous Ca²⁺–SO ₃ ^2– ion interactions can be satisfactorily modeled using either ion-association or ion-interaction aqueous thermodynamic models. In the ion-association model, the log K°=2.62±0.07 for Ca²⁺+SO ₃ ^2– CaSO ₃ ⁰ . In the Pitzer ion-interaction model, the binary parameters (⁰) and (¹) for Ca²⁺–SO ₄ ^2– were used, and the value of (²) was determined from the experimental data. As expected given the strong association constant, the value of (⁰) was quite small (about –134). We feel a combination of the two models is most useful. The logarithm of the thermodynamic equilibrium constant (K°) of the CaSO₃·1/2H₂O(c) solubility reaction (CaSO₃·1/2H₂O(c)Ca²⁺+SO ₃ ²⁺ +0.5H₂O) was found to be –6.64±0.07.     

Determination of kinetic parameters of the FeCl3/FeCl2 systemvia a novel treatment of chronoamperometric data

Summary Computer based methods for the processing of chronoamperometric datavia convolutions are discussed. On the example of the quasi-reversible Fe³⁺/Fe²⁺ couple, their application for data acquisition and determination of the heterogeneous electrochemical parameters is demonstrated. The plot of Q/i vs. t/i is superior to that employingi/I ₁, being less sensitive to distortions by charging currents once these have died away and by the effects of damping on the initially rapidly varying currents. Cyclic voltammetry is often combined with convolution or deconvolution, and digital simulation studies are also frequently performed to confirm the results.

---

Bestimmung kinetischer Parameter des Systems FeCl₃/FeCl₂ mittels einer neuen Verarbeitung chronoamperometrischer Daten

Zusammenfassung Computerunterstützte Verfahren zur Verarbeitung chronoamperometrischer Daten mittels Faltungsintegralen werden diskutiert. Am Beispiel des quasireversiblen Systems Fe³⁺/Fe²⁺ wird die Anwendung der neuen Methoden zur Datenerfassung und zur Bestimmung der heterogenen elektrochemischen Parameter gezeigt. Der Plot von Q/i gegen t/i ist dem voni/I ₁ überlegen, da er durch Ladeströme und Dämpfung der ursprünglich stark variierenden Ströme weniger stark beeinflußt wird. Cyclische Voltammetrie wird häufig im Zusammenhang mit Konvolutions- und Dekonvolutionsmethoden angewandt; digitale Simulation zur Überprüfung der Ergebnisse wird ebenfalls oft eingesetzt.

     

Influence of o-benzoquinone nature on initiation of radical polymerization by the o-benzoquinone—tert-amine system

o-Benzoquinones initiate radical polymerization of methacrylates under visible light irradiation in the presence of tertiary amines. Spectral sensitivity of the initiating system coincides with absorption bands of o-benzoquinone attributed to the S(*) (_max 400 nm) and S(n*) (_max 600 nm) transitions. The amine radicals (Am^·) initiating polymerization are generated by the photoreduction of Q in the presence of AmH from the triplet radical pair ³(QH^·, Am^·). The yield of Am^· depends on the difference between the volumes of substituents in the 3 and 6 positions of the quinoid ring and is maximal for symmetrically substituted o-benzoquinones. For a series of derivatives of symmetrical 3,6-di-tert-butyl-o-benzoquinone, the rate of photopolymerization of ,-bis(methacryloyloxyethyleneoxycarbonyloxy)ethyleneoxyethylene (OCM-2) in the presence of N,N-dimethylaniline is determined by the free energy (G _e) of electron transfer from the amine to photoexcited o-benzoquinone. The G _e value includes the energies of oxidation of the amines and reduction of the o-quinones and the energy of the 00 transition of the triplet excited state of o-benzoquinones, which are equal to their redox potentials. The photopolymerization rate is maximal for G _e 0.     

Preparation of Al2TiO5-ZrO2 mixed powders via sol-gel process

Sol-gel routes in the ternary system Al₂O₃-TiO₅-ZrO₂ were investigated to prepare Al₂TiO₅-ZrO₂ mixed powders. The preparation of ZrTiO₄ and Al₂TiO₅ was studied before going on with the ternary system. Zirconium titanate precursor gels were prepared from Ti(OPrⁱ)₄ and Zr(OPrⁿ)₄ mixtures. The crystallization of ZrTiO₄ develops at T<700°C. Al₂TiO₅ was prepared by different ways, using mixtures of Al(OBu^s)₂(C₆H₉O₃) with Ti(OPr ⁱ )₄ (i), or with acetic acid addition (ii). Route (i) leads to a separate crystallization of TiO₂ and -Al₂O₃, with subsequent formation of -Al₂TiO₅ at T1360°C. Although the pseudobrookite -Al₂TiO₅ is thermodynamically unstable below 1280°C, route (ii) leads to the crystallization of metastable -Al₂TiO₅ at T800°C. At increasing temperature, -Al₂TiO₅ decomposes into TiO₂ and -Al₂O₃, then the two compounds react to form stable -Al₂TiO₅. For the ternary system, all the preparation routes which were studied lead to ZrTiO₄ and -Al₂O₃ with subsequent reaction (at T1500°C) to give -Al₂TiO₅ and ZrO₂.     

Komplexe des zweiwertigen Molybdäns,Derivate des Oktahalodimolybdat(II)-Ions, 4. Mitt.: Darstellungen und Kristallstrukturen von zwei neutralen Komplexen mit 4-Methylpyridin

Mo₂Cl₄ Pic ₄·CHCl₃ (A) (Pic=4-methylpyridine) and Mo₂Br₄ Pic ₄ (B) crystallize in the monoclinic space group.A inC2/c (No. 15) witha=15.175 (4),b=10.847 (2),c=19.946 (6) and =104.52 (2)°;D _o=1.71 (2),D _c =1.72 gcm^–3 forZ=4.B inP2_l/n (No. 14) witha=9.270 (3),b=16.614 (5),c=9.305 (3) and =91.96 (5)°;D _o=2.03 (3),D _c =2.05 gcm^–3 forZ=2.Two halogens and 4-methylpyridines of the MoX ₂ Pic ₂ group are in the trans position. Mo–Mo bond lengths are 2.153 96) forA and 2.150 92) forB. Both molecules are situated on the inversion center resulting in the eclipsed configuration of the ligands around the molybdenum pair. The structure ofB has been refined to the conventionalR factors of 0.08 and 0.098. Disorder on the part of 4-methylpyridines and chloroform molecules stopped the refinement ofA at the endR value of 0.175.Mean Mo–X and Mo–N bonding distances are 2.40 (2), 2.25 (5) forA and 2.53 (3), 2.25 (1) forB.

     

Shear-induced deformation of polystyrene coils in dilute solution from small angle neutron scattering 2. Variation of shear gradient,molecular mass and solvent viscosity

The technique of small angle neutron scattering (SANS) has been used to study the conformation of polystyrene chains in dilute solution under a constant shear gradient. The experiments reveal a distinct anisotropy of the molecular dimensions with regard to the directions parallel and perpendicular to the flow direction on the 2D-multidetector. The deformation ratio of the single polymer chain (R ²/R _iso ² )–1 as a function of the reduced shear gradient=([] · · M _w G)/RT shows a transition from the ideal ²-behaviour for dynamic infinitely flexible coils found at small gradients, to a behaviour with smaller increase at larger. These results are qualitatively consistent with the theory of Cerf for a polymer with finite internal viscosity in a shear gradient. At low(<1), a better agreement with the model of a free-draining coil (Rouse behaviour) than with the Zimm model is observed.     

PVT properties of concentrated electrolytes. VI. The speed of sound and apparent molal compressibilities of NaCl,Na2SO4, MgCl2, and MgSO4 solutions from 0 to 100°C

The sound velocities of aqueous NaCl, Na₂SO₄, MgCl₂, and MgSO₄ solutions were measured from 25 to 95°C in 10^o intervals from dilute to saturated solutions. The results were combined with our earlier data and fitted to functions of molality and temperature to within ±0.4 m-sec^–1. The adiabatic compressibilities _S were calculated from sound speeds and used to calculate the adiabatic apparent molal compressibilities . Isothermal compressibilities and isothermal apparent molal compressibilities were calculated from _S using literature values for the expansibilities and heat capacities. The values of were extrapolated to infinite dilution using the Debye-Huckel limiting law to determine partial molal compressibilities. The apparent molal compressibilities were fitted to Pitzer's equations. The Pitzer parameters for the concentration dependence of were determined as a function of temperature. Correlations of and V at various temperatures were found for the electrolytes.     

The volumes of mixing of aqueous solutions of CdCl2, CuCl2, MnCl2, and ZnCl2 with HCl at varying ionic strength at 25°C

The densities of mixtures of aqueous solutions of hydrochloric acid with solutions of cadmium chloride, copper chloride, manganese chloride, and zinc chloride have been measured at constant ionic strengths of 1.0 and 3.0 mol-kg^–1 at 25°C. The density data were used to determine the volumes of mixing (V _m ). The volume of mixing equations of Pitzer were then fit to the resulting V _m data to obtain the Pitzer parameters _V ^MN and _V ^MNX , which are the pressure derivatives of the free energy equation parameters.