Cell adhesive spectra along surface wettability gradient from superhydrophilicity to superhydrophobicity

Surface wettability is important to design biointerfaces and functional biomaterials in various biological applications. However, to date, it remains some confusions about how cells would response to the surfaces with different wettabilities. Herein, we systematically explore the adhesive spectra of cells to the surface with wettability gradient from superhydrophilicity to superhydrophobicity, clarifying the effect of wettability on cell adhesion. We envision that this study may provide valuable information for the design of biomedical implants with controllable cell adhesion, such as neural interface devices and flexible implant.     

Strain-controlled switching of hierarchically wrinkled surfaces between superhydrophobicity and superhydrophilicity

Recent years have witnessed intense interest in multifunctional surfaces that can be designed to switch between different functional states with various external stimuli including electric field, light, pH value, and mechanical strain. The present paper is aimed to explore whether and how a surface can be designed to switch between superhydrophobicity and superhydrophilicity by an applied strain. Based on well-established theories of structure buckling and solid-liquid contact, we show that this objective may be achieved through a hierarchically wrinkled surface. We derive general recursive relations for the apparent contact angle at different levels of the hierarchical surface and investigate the thermodynamic stability of different contact states. Our study may provide useful guidelines for the development of multifunctional surfaces for many technological applications.     

From superhydrophilicity to superhydrophobicity: the wetting behavior of a methylsilicone/phenolic resin/silica composite surface

A methylsilicone/phenolic resin/silica composite surface was prepared by a casting method. The wetting behavior of the surface was investigated. It was found that the as-prepared surface can be varied from superhydrophilicity to superhydrophobicity as the drying temperature increased. Methylsilicone/silica and phenolic resin/silica composite surfaces were also prepared as comparisons. Both of them cannot achieve superhydrophobicity. A mechanism was proposed to explain this phenomenon.     

Bio-inspired fabrication of well-oriented ZnO nanorod arrays film and its superhydrophobicity and superhydrophilicity

A highly oriented ZnO nanorod array film was fabricated on glass substrate by combinations of Sol–Gel and hydrothermal. The film exhibits perfect superhydrophobicity with a contact angle of 155° and a glide angle of 4° after being surface modified by fluoroalkylsilane, which is similar with wings’ property and structures of large yellow spots mosquitoes. Interestingly, the ZnO nanorods film were converted from superhydrophobicity into superhydrophilicity under ultraviolet light for 2 h due to the decomposition of fluoroalkyl chain of fluoroalkylsilane and the photosensitivity of ZnO surface. The transition mechanisms of wettability are discussed on the basis of correlated theories.     

Reversible wettability of a chemical vapor deposition prepared ZnO film between superhydrophobicity and superhydrophilicity

A superhydrophobic ZnO thin film was fabricated by the Au-catalyzed chemical vapor deposition method. The surface of the film exhibits hierarchical structure with nanostructures on sub-microstructures. The water contact angle (CA) was 164.3 degrees, turning into a superhydrophilic one (CA < 5 degrees) after UV illumination, which can be recovered through being placed in the dark or being heated. The film was attached tightly to the substrate, showing good stability and durability. The surface structures were characterized by scanning electron microscopy and atomic force microscopy.     

UV-manipulated wettability between superhydrophobicity and superhydrophilicity on a transparent and conductive SnO2 nanorod film

A smart surface with wettability that can be switched between superhydrophobicity and superhydrophilicity has been realized on a transparent and conductive SnO2 nanorod film by the alternation of UV-irradiation and dark storage.     

Control of superhydrophilicity/superhydrophobicity using silicon nanowires via electroless etching method and fluorine carbon coatings

Surface roughness is promotive of increasing their hydrophilicity or hydrophobicity to the extreme according to the intrinsic wettability determined by the surface free energy characteristics of a base substrate. Top-down etched silicon nanowires are used to create superhydrophilic surfaces based on the hemiwicking phenomenon. Using fluorine carbon coatings, surfaces are converted from superhydrophilic to superhydrophobic to maintain the Cassie-Baxter state stability by reducing the surface free energy to a quarter compared with intrinsic silicon. We present the robust criteria by controlling the height of the nanoscale structures as a design parameter and design guidelines for superhydrophilic and superhydrophobic conditions. The morphology of the silicon nanowires is used to demonstrate their critical height exceeds several hundred nanometers for superhydrophilicity, and surpasses a micrometer for superhydrophobicity. Especially, SiNWs fabricated with a height of more than a micrometer provide an effective means of maintaining superhydrophilic (<10°) long-term stability.     

Nanotexturing of polystyrene surface in fluorocarbon plasmas: from sticky to slippery superhydrophobicity

In this work plasma etching processes have been studied to roughen and fluorinate polystyrene surface as an easy method to achieve a superhydrophobic slippery character. Radiofrequency discharges have been fed with CF(4)/O(2) mixtures and the effect of the O(2):CF(4) ratio, the input power, and the treatment duration have been investigated in terms of wettability, with focus on sliding performances. For this purpose, surface morphological variations, evaluated by means of scanning electron microscopy and atomic force microscopy, together with the chemical assessment by X-ray photoelectron spectroscopy, have been correlated with water contact angle hysteresis and volume resolved sliding angle measurements. Results indicate that by increasing the height and decreasing the density of the structures formed by etching, within a tailored range, a transition from sticky to slippery superhydrophobicity occurs. A short treatment time (5 min) is sufficient to obtain such an effect, provided that a high power input is utilized. Optimized surfaces show a unaltered transparency to visible light according to the low roughness produced.     

Nanoporosity-driven superhydrophilicity: a means to create multifunctional antifogging coatings

Multifunctional nanoporous thin films have been fabricated from layer-by-layer assembled silica nanoparticles and a polycation. The resultant multilayer films were found to exhibit both antifogging and antireflection properties. The antifogging properties are a direct result of the development of superhydrophilic wetting characteristics (water droplet contact angle <5 degrees within 0.5 s or less). The nearly instantaneous sheetlike wetting promoted by the superhydrophilic multilayer prevents light scattering water droplets from forming on a surface. The low refractive index of the multilayer film (as low as 1.22) resulting from the presence of nanopores was found to impart excellent antireflection properties. Glass slides coated on both sides with a nanoporous multilayer film exhibited transmission levels as high as 99.8%. Stable superhydrophilic wetting characteristics were obtained only after a critical number of bilayers were deposited onto a surface. The assembly conditions (solution pH and nanoparticle concentration), as well as the choice of nanoparticle size, were found to strongly influence film properties. It is suggested that the superhydrophilic behavior is driven by the rapid infiltration of water into a 3D nanoporous network created under specific assembly conditions.     

Underwater superhydrophobicity: theoretical feasibility

The possibility of underwater superhydrophobicity is theoretically analyzed. Thermodynamic equilibrium and stability conditions are formulated, and the design goal is defined as minimizing the solid-liquid contact area. It is shown that for sufficiently high roughness ratios, underwater superhydrophobicity may be feasible and thermodynamically stable. In addition, some generic design optimization considerations are demonstrated.     

The Lotus effect: superhydrophobicity and metastability

To learn how to mimic the Lotus effect, superhydrophobicity of a model system that resembles the Lotus leaf is theoretically discussed. Superhydrophobicity is defined by two criteria: a very high water contact angle and a very low roll-off angle. Since it is very difficult to calculate the latter for rough surfaces, it is proposed here to use the criterion of a very low wet (solid-liquid) contact area as a simple, approximate substitute for the roll-off angle criterion. It is concluded that nature employs metastable states in the heterogeneous wetting regime as the key to superhydrophobicity on Lotus leaves. This strategy results in two advantages: (a) it avoids the need for high steepness protrusions that may be sensitive to breakage and (b) it lowers the sensitivity of the superhydrophobic states to the protrusion distance.     

Mean-field theory of liquid droplets on roughened solid surfaces: application to superhydrophobicity

We present calculations of the density distributions and contact angles of liquid droplets on roughened solid surfaces for a lattice gas model solved in a mean-field approximation. For the case of a smooth surface, this approach yields contact angles that are well described by Young's equation. We consider rough surfaces created by placing an ordered array of pillars on a surface, modeling so-called superhydrophobic surfaces, and we have made calculations for a range of pillar heights. The apparent contact angle follows two regimes as the pillar height increases. In the first regime, the liquid penetrates the interpillar volume, and the contact angle increases with pillar height before reaching a constant value. This behavior is similar to that described by the Wenzel equation for contact angles on rough surfaces, although the contact angles are underestimated. In the second regime, the liquid does not penetrate the interpillar volume substantially, and the contact angle is independent of the pillar height. This situation is similar to that envisaged in the Cassie-Baxter equation for contact angles on heterogeneous surfaces, but the contact angles are overestimated by this equation. For larger pillar heights, two states of the droplet can be observed, one Wenzel-like and the other Cassie-like.     

The superhydrophobicity of polymer surfaces: Recent developments

Superhydrophobicity is the extreme water repellence of highly textured surfaces. The field of superhydrophobicity research has reached a stage where huge numbers of candidate treatments have been proposed and jumps have been made in theoretically describing them. There now seems to be a move to more practical concerns and to considering the demands of individual applications instead of more general cases. With these developments, polymeric surfaces with their huge variety of properties have come to the fore and are fast becoming the material of choice for designing, developing, and producing superhydrophobic surfaces. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1203–1217, 2011     

Patterned nonadhesive surfaces: superhydrophobicity and wetting regime transitions

Nonadhesive and water-repellent surfaces are required for many tribological applications. We study mechanisms of wetting of patterned superhydrophobic Si surfaces, including the transition between various wetting regimes during microdroplet evaporation in environmental scanning electron microscopy (ESEM) and for contact angle and contact angle hysteresis measurements. Wetting involves interactions at different scale levels: macroscale (water droplet size), microscale (surface texture size), and nanoscale (molecular size). We propose a generalized formulation of the Wenzel and Cassie equations that is consistent with the broad range of experimental data. We show that the contact angle hysteresis involves two different mechanisms and how the transition from the metastable partially wetted (Cassie) state to the homogeneously wetted (Wenzel) state depends upon droplet size and surface pattern parameters.     

Conductance switching in an organic material: from bulk to monolayer

Fluorescein sodium, which does not exhibit electrical bistability in thin films, can be switched to a high conducting state by the introduction of carbon nanotubes as channels for carrier transport. Thin films based on fluorescein sodium/carbon nanotubes display memory switching phenomenon among a low conducting state and several high conducting states. Read-only and random-access memory applications between the states resulted in multilevel memory in these systems. Results in thin films and in a monolayer (deposited via layer-by-layer assembly) show that instead of different molecular conformers, multilevel conducting states arise from the different density of high conducting fluorescein molecules.