Immobilization of acetylcholinesterase in lipid membranes deposited on self-assembled monolayers

Human red blood cell acetylcholinesterase was incorporated into planar lipid membranes deposited on alkanethiol self-assembled monolayers (SAMs) on gold substrates. Activity of the protein in the membrane was detected with a standard photometric assay and was determined to be similar to the protein in detergent solution or incorporated in lipid vesicles. Monolayer and bilayer lipid membranes were generated by fusing liposomes to hydrophobic and hydrophilic SAMs, respectively. Liposomes were formed by the injection method using the lipid dimyristoylphosphatidylcholine (DMPC). The formation of alkanethiol SAMs and lipid monolayers on SAMs was confirmed by sessile drop goniometry, ellipsometry, and electrochemical impedance spectroscopy. In this work, we report acetylcholinesterase immobilization in lipid membranes deposited on SAMs formed on the gold surface and compare its activity to enzyme in solution.     

Immobilization of antibodies on biosensing devices by nanoarrayed self-assembled monolayers

This work presents an original and straightforward technique for antibody immobilization onto a surface, keeping the antibody in a biologically reactive configuration. Self-assembly of molecular monolayers and plasma-based colloidal lithography were combined to create chemical nanopatterns on the surface of a biosensing device. This technique was employed to create an array of 100 nm wide motifs having a hexagonal 2-D crystalline structure, characterized by COOH-terminated nanospots in a CH3-terminated matrix. The quality control of the chemical nanopattern was carried out by combining atomic force microscopy, ellipsometry, and contact angle measurements. Enzyme-linked immunosorbent assay experiments were set up showing that the COOH/CH3 nanopatterned surface constrains the immobilization of the antibodies in a biologically reactive configuration, thus significantly improving the device performances as compared to those of more conventional nonpatterned COOH-terminated or CH3-terminated surfaces.     

Immobilization of bio-macromolecules on self-assembled monolayers: methods and sensor applications

Attachment of biomolecules on gold, silicon or glass surfaces has direct implications for the development of novel biosensors in the context of nanoscale detection of pathogens and other metabolites related to issues of human health. In this critical review, we have highlighted the current developments in various techniques of immobilization of biomolecules, specifically biological macromolecules on surfaces through the modification of a functional self-assembled monolayer. The utility of such immobilized biomolecules in the area of biosensing in nanoscale has been surveyed. Merits and demerits of some of the methods with reference to sensitivity of detection and practical use have been discussed (221 references).     

Physically self-assembled monolayers (PSAMs) of lecithin lipids at hydrophilic silicon oxide interfaces

A new method of making physically self-assembled monolayers (PSAMs) on hydrophilic solid surfaces is presented. This method uses a mixture of a nonpolar solvent, such as hexane, and a strong polar solvent, such as ethanol, to dissolve the lipids. The deposition of two lecithin lipids, dipalmitoylphosphatidylcholine (DPPC) and dilauroylphosphatidylcholine (DLPC), has been studied. These lipids physically self-assemble, or adsorb, onto hydrophilic silicon oxide/silicon surfaces when such surfaces are in contact with the lipid solution. The adsorbed layers were probed with ex-situ attenuated total reflection infrared (ATR-IR) spectroscopy, ellipsometry, contact angle measurements, and atomic force microscopy (AFM). The thicknesses of the adsorbed monolayers are about 2.8 +/- 0.2 nm for DPPC and 2.0 +/- 0.2 nm for DLPC, as determined by ellipsometry and AFM. Smooth, uniform monolayers of controlled surface density are formed. The surface density of adsorbed layers is comparable to those of close-packed lipid monolayers, as calculated from the ellipsometry and ATR-IR results. Producing controlled-thickness monolayers has applications in boundary lubrication, biomaterials, sensor technologies, and electronics. The method can be used for depositing many biological surfactants or lipids without the need to modify these surfactants chemically to form chemical bonds with the surfaces, as required by the usual chemical SAMs. Moreover, the new method has several advantages compared to the Langmuir-Blodgett (LB) method.     

Immobilization of gold nanorods onto acid-terminated self-assembled monolayers via electrostatic interactions

We report the immobilization of gold nanorods onto self-assembled monolayers (SAMs) of 16-mercaptohexadecanoic acid (16-MHA). The simple two step protocol involves formation of a SAM of 16-MHA molecules onto gold-coated glass slides and subsequent immersion of these slides into the gold nanorod solution. The nanorods, formed by a seed-mediated, surfactant-assisted synthesis protocol, are stabilized in solution due to surface modification by the surfactant cetyltrimethylammonium bromide (CTAB). Attractive electrostatic interactions between the carboxylic acid group on the SAM and the positively charged CTAB molecules are likely responsible for the nanorod immobilization. UV-vis spectroscopy has been used to follow the kinetics of the nanorod immobilization. The nature of interaction between the gold nanorods and the 16-MHA SAM has been probed by Fourier transform infrared spectroscopy (FTIR). The surface morphology of the immobilized rods is studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements. SEM was also used to determine the density of the immobilized nanorods as a function of the pH of immobilization. Control over the surface coverage of the immobilized gold nanorods has been demonstrated by simple pH variation. Such well-dispersed immobilized gold nanorods with control over the surface coverage could be interesting substrates for applications such as surface-enhanced Raman spectroscopy (SERS).     

Energy level alignment at organic semiconductor/metal interfaces: effect of polar self-assembled monolayers at the interface

We determined the shifts in the energy levels of approximately 15 nm thick poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] films deposited on various substrates including self-assembled monolayer (SAM) modified Au surfaces using photoelectron spectroscopy. As the unmodified substrates included Au, indium tin oxide, Si (with native oxide), and Al (with native oxide), a systematic shift in the detected energy levels of the organic semiconductor was observed to follow the work function values of the substrates. Furthermore, we used polar SAMs to alter the work function of the Au substrates. This suggests the opportunity to control the energy level positions of the organic semiconductor with respect to the electrode Fermi level. Photoelectron spectroscopy results showed that, by introducing SAMs on the Au surface, we successfully increased and decreased the effective work function of Au surface. We found that in this case, the change in the effective work function of the metal surface was not reflected as a shift in the energy levels of the organic semiconductor, as opposed to the results achieved with different substrate materials. Our study showed that when a substrate is modified by SAMs (or similarly by any adsorbed molecules), a new effective work function value is achieved; however, it does not necessarily imply that the new modified surface will behave similar to a different metal where the work function is equal to the effective work function of the modified surface. Various models and their possible contribution to this result are discussed.     

Host-guest interactions at self-assembled monolayers of cyclodextrins on gold

We have developed synthesis routes for the introduction of short and long dialkylsulfides onto the primary side of alpha-, beta-, and gamma-cyclodextrins. Monolayers of these cyclodextrin adsorbates were characterized by electrochemistry, wettability studies, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and atomic force microscopy (AFM). The differences in thickness and polarity of the outerface of the monolayers were measured by electro-chemistry and wettability studies. On average about 70% of the sulfide moieties were used for binding to the gold, as measured by XPS. Tof-SIMS measurements showed that the cyclodextrin adsorbates adsorb without any bond breakage. AFM measurements revealed for beta-cyclodextrin monolayers a quasi-hexagonal lattice with a lattice constant of 20.6 A, which matches the geometrical size of the adsorbate. The alpha-cyclodextrin and gamma-cyclodextrin monolayers are less ordered. Interactions of the anionic guests 1-anilinonaphthalene-8-sulfonic acid (1,8-ANS) and 2-(p-toluidinyl)naphthalene-6-sulfonic acid (2,6-TNS) and the highly ordered monolayers of heptapodant beta-cyclodextrin adsorbates were studied by surface plasmon resonance (SPR) and electrochemical impedance spectroscopy. The SPR measurements clearly showed interactions between a beta-cyclodextrin monolayer and 1,8-ANS. Electrochemical impedance spectroscopy measurements gave high responses even at low guest concentrations (< or = 5 microM). The association constant for the binding of 1,8-ANS (K = 289,000 +/- 13,000M-1) is considerably higher than the corresponding value in solution. (Partial) methylation of the secondary side of the beta-cyclodextrin strongly decreases the binding.     

Structure-function relations in self-assembled C18- and C20-sphingosines monolayers at gas/water interfaces

Synchrotron X-ray studies and surface pressure versus molecular area (pi-A) isotherms of C18- and C20-sphingosines spread at air/water interfaces reveal unique interfacial properties with considerable differences between the two single hydrocarbon chain amino-alcohols. C20-sphingosine forms a crystalline monolayer with structural characteristics that are dominated by hydrogen bonding in the headgroup (common to its sphingolipid derivatives), whereas its natural counterpart C18-sphingosine forms a disordered liquidlike metastable monolayer and has to be spread in excess with a floating reservoir on the water surface to compensate for the high dissolution rate of molecules into the water subphase. The marginal affinity of C18-sphingosine to reside at the interface, the microcrystallization at very low densities, the corrugated monolayers it forms, and the strong interaction with the water surface are consistent with the roles that sphingolipids play in the life cycle of eukaryotic cells and as the building blocks of specialized membranes.     

Modeling the properties of self-assembled monolayers terminated by carboxylic acids

Self-assembled monolayers of long-chain carboxylic acids are often used as substrates to promote the growth of oriented crystals. Recent work has shown that the length of the chain (odd or even number of carbon atoms) determines whether oriented growth is observed. We use molecular dynamics simulations to investigate whether the configuration of the headgroups is significantly different in the two cases. We conclude that there are differences between odd- and even-length chains, even at 300 K and in the presence of water for some packings of the monolayer. We discuss whether these differences are large enough to account for the different behavior.     

Redox mediation at 11-mercaptoundecanoic acid self-assembled monolayers on gold

Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and digital simulation techniques were used to investigate quantitatively the mechanism of electron transfer (ET) through densely packed and well-ordered self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid on gold, either pristine or modified by physically adsorbed glucose oxidase (GOx). In the presence of ferrocenylmethanol (FcMeOH) as a redox mediator, ET kinetics involving either solution-phase hydrophilic redox probes such as [Fe(CN)6]3-/4- or surface-immobilized GOx is greatly accelerated: [Fe(CN)6]3-/4- undergoes diffusion-controlled ET, while the enzymatic electrochemical conversion of glucose to gluconolactone is efficiently sustained by FcMeOH. Analysis of the results, also including the digital simulation of CV and EIS data, showed the prevalence of an ET mechanism according to the so-called membrane model that comprises the permeation of the redox mediator within the SAM and the intermolecular ET to the redox probe located outside the monolayer. The analysis of the catalytic current generated at the GOx/SAM electrode in the presence of glucose and FcMeOH allowed the high surface protein coverage suggested by X-ray photoelectron spectroscopy (XPS) measurements to be confirmed.     

Conglomerate crystallization on self-assembled monolayers

In this communication, we demonstrate that chiral self-assembled monolayers can be used for polymorphism control of chiral crystals. We studied the crystallization of DL-glutamic acid on chiral self-assembled monolayers and showed that crystallization of DL-glutamic acid on the chiral SAMs resulted in stabilization of the metastable conglomerate form.     

Adsorbed and spread beta-casein monolayers at oil-water interfaces

A previous study (Langmuir 2003, 19, 8436) used a Langmuir type pendant drop film balance to form beta-casein monolayers at the air-water interface. The present paper reports the application of that technique to the formation of protein monolayers at liquid interfaces. This technique allows a direct comparison between spread and adsorbed beta-casein interfacial behaviors that is presented in terms of their pi-A isotherms and static elasticity moduli. Pi-A isotherms of adsorbed and spread protein have been compared and found to be fairly similar in shape, stability, and also hysteresis phenomena. Examination of the elasticity moduli of both layers shows a similar analogy although slight differences arise and are interpreted in terms of the protein unfolding extent attained by both procedures at the oil interface.     

Phosphonate self-assembled monolayers on aluminum surfaces

Substrates of aluminum (Al) deposited by physical vapor deposition onto Si substrates and then chemically reacted with perfluorodecylphosphonic acid (PFDPAlSi), decylphosphonic acid (DPAlSi), and octadecylphosphonic acid (ODPAlSi) were studied by x-ray photoelectron spectroscopy (XPS), contact angle measurements, atomic force microscopy (AFM), and friction force microscopy, a derivative of AFM, to characterize their surface chemical composition, roughness, and micro-/nanotribological properties. XPS analysis confirmed the presence of perfluorinated and nonperfluorinated alkylphosphonate molecules on the PFDPAlSi, DPAlSi, and ODPAlSi. The sessile drop static contact angle of pure water on PFDPAlSi was typically more than 130 degrees and on DPAlSi and ODPAlSi typically more than 125 degrees indicating that all phosphonic acid reacted AlSi samples were very hydrophobic. The surface roughness for PFDPAlSi, DPAlSi, ODPAlSi, and bare AlSi was approximately 35 nm as determined by AFM. The surface energy for PFDPAlSi was determined to be approximately 11 mNm by the Zisman plot method compared to 21 and 20 mNm for DPAlSi and ODPAlSi, respectively. Tribology involves the measure of lateral forces due to friction and adhesion between two surfaces. Friction, adhesion, and wear play important roles in the performance of micro-/nanoelectromechanical systems. PFDPAlSi gave the lowest adhesion and coefficient of friction values while bare AlSi gave the highest. The adhesion and coefficient of friction values for DPAlSi and ODPAlSi were comparable.     

Hydroxide ion adsorption on self-assembled monolayers

It is argued, on the basis of density functional calculations, that a self-assembled monolayer of oligo(ethylene glycol) or n-alkanes in contact with water will preferentially adsorb hydroxyl ions (either from autoionization of water or added to the solution) on both methoxy- and hydroxide-terminated endgroups, thus charging the surface region of the SAM negatively with an estimated charge density of about 1 microC/cm(2) in agreement with recent experiments. The negative charging can explain long-ranged forces between opposing SAM surfaces. On dense SAMs, hydroxyl ions are highly mobile. Hydronium ions can absorb by penetration into the SAM provided there is enough lateral space for their encapsulation. The important role of hydration is demonstrated by calculating the excess binding energy of adsorption using a Born-Haber cycle.     

1-Dodecanethiol self-assembled monolayers on cobalt

Cobalt and its alloys are used in a broad range of application fields. However, the use of this metal is especially limited by its strongly oxidizable nature. The use of alkanethiol self-assembled monolayers (SAMs) is a very efficient way to protect against such oxidation and/or to inhibit corrosion. This surface modification method has been particularly applied to oxidizable metals such as copper or nickel, yet the modification of cobalt surfaces by alkanethiol SAMs received limited attention up to now. In this work, we study the influence of parameters by which to control the self-assembly process of 1-dodecanethiol monolayers on cobalt: nature of the surface pretreatment, solvent, immersion time, and concentration. Each of these parameters has been optimized to obtain a densely packed and stable monolayer able to efficiently prevent the reoxidation of the modified cobalt substrates. The obtained monolayers were characterized by X-ray photoelectron spectroscopy (XPS), polarization modulation infrared reflection-absorption spectroscopy, and contact angle measurements. The stability of the optimized 1-dodecanethiol monolayer upon air exposure for 28 days has been confirmed by XPS.     

Photoluminescence studies of oligothiophene self-assembled monolayers at low excitation energy

Photoluminescence spectroscopy studies have been performed on self-assembled monolayers (SAMs) on Au(111) of thiophene oligomers with the number of thiophen rings N=3 and N=4. Photoluminescence spectra of SAMs reveal excitonic behavior with different band resolution and temperature dependence. These differences are attributed to different SAMs structure (degree of ordering).     

Electro-oxidation of glucose at self-assembled monolayers incorporated by copper particles

A novel copper incorporated self-assembled monolayers (SAMs) modified gold electrode (Cu/SAMs) for determination of glucose was developed by electrodepositing Cu particles on the SAMs of hexanethiol. The scanning electron microscopic (SEM) images showed that copper formed orbicular particles of nanosizes on the SAMs, which was much different from the fractal-like particles of copper formed at gold electrode. The Cu/SAMs film electrode exhibited high sensitivity to glucose oxidation and depressed responses towards some interferents of glucose in blood like uric acid and ascorbic acid. Under optimal working conditions, the oxidation current of glucose was proportional to the concentration of glucose in the range from 3.0 μM to 10 mM by amperometry with a low detection limit of 0.7 μM glucose (S/N = 3). This electrode was successfully applied to the determination of glucose in rat blood and the results were satisfactory.     

Polysaccharides at interfaces 2. Surface potential of adsorbed cholesteryl-pullulan monolayers at the solution-air interface

The surface potential of adsorbed monolayers of cholesteryl-pullulan (CHP) derivatives has been determined by the ionizing differential electrode method. It has been found that this potential is highly dependent on the degree of cholesterol grafted onto pullulan, and that the native polysaccharide displays neither surface activity nor surface potential. As the disordered structure of the non-ionic polysaccharide unit generates a random orientation of intrinsic dipole moments, it has been considered that its contribution to the measured surface potential is rather small, compared to the cholesteryl group dipolar contribution. The surface densities of cholesteryl groups of adsorbed CHP molecules have been determined from the relationship between the surface potential and the surface density of spread cholesterol molecules. The assessment of these quantities was essential, as the determination of the surface tension data for the CHP derivatives with low cholesteryl content (CHP_45−0.6 and CHP_50−0.9) was difficult to achieve (Part I of this work [B. Deme´, V. Rosilio and A. Baszkin, Colloids Surfaces B: Biointerfaces, 4 (1995) 357]). These results complement those from the surface tension measurements, and confirm that in the surface layer of the adsorbed polysaccharide the ordered cholesteryl groups are oriented towards the air phase and the disordered polysaccharide is immersed in the aqueous subphase. Proposed models for semi-organized adsorbed CHP layers are discussed.