An efficient synthesis of diynes using (diacetoxyiodo)benzene

A novel and facile method for synthesis of symmetrical conjugated diynes, using (diacetoxyiodo)benzene as oxidant under palladium-catalyzed conditions is presented, in which diynes are prepared in good yields in a short period of time at room temperature.     

1,4‐Bis(2‐benzimidazolyl)­benzene

The title compound, C₂₀H₁₄N₄, lies about an inversion centre and the benz­imidazole moiety and the phenyl ring are twisted by 30.9 (1)°. The benz­imidazole moiety is completely planar, with a maximum deviation of 0.009 (2) Å. Intermolecular N—­H?N hydrogen bonds give rise to a layered structure, with the layers stacked by van der Waals interactions.     

1,4‐Bis(p‐tolyl­ethynyl)benzene

The rod‐like molecule of the title hydro­carbon, C₂₄H₁₈, is centrosymmetric, with the centroid of the central benzene ring residing on an inversion center. The molecules display a planar conformation of the benzene rings and aggregate into stacks along the [010] direction via Csp³—H⋯π(arene) interactions, thus forming a stair‐like pseudo‐two‐dimensional network. Each molecule acts as both a C—H hydrogen donor and a π‐arene acceptor, forming four hydrogen bonds per molecule.     

An efficient one-step synthesis of fulleroisoxazolines and fulleropyrazolines mediated by (diacetoxyiodo)benzene

An efficient one-step strategy for the synthesis of fulleroisoxazolines/fulleropyrazolines from fullerene and aldoximes/hydrazones mediated by PhI(OAc)₂ has been described.     

Soluble fluorinated polyimides derived from 1,4‐ (4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl)benzene and aromatic dianhydrides

New fluorinated aromatic polyimides were prepared from 1,4‐(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl)benzene and aromatic dianhydrides via the polycondensation of one‐step high‐temperature and two‐step thermal or chemical imidization methods. Experimental results indicated that some of the polyimides were soluble both in strong dipolar solvents (N‐methyl‐2‐pyrrolidone or N,N‐dimethylacetamide) and in common organic solvents such as tetrahydrofuran, CHCl₃, and acetone. The polyimides showed exceptional thermal and thermooxidative stability and good mechanical properties. No weight loss was detected before a temperature of 520 °C in nitrogen, and the glass‐transition temperatures ranged from 208 to 251 °C. Low dielectric constants (2.55–2.71 at 1 MHz), low refractive indices, and low water absorption were also observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2404–2413, 2001     

Synthesis and characterization of soluble fluorine‐containing polyimides based on 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzene

The synthesis and properties of a class of soluble fluorine‐containing aromatic polyimides are described. Substituents of trifluoromethyl groups on the aromatic rings of paralinked aromatic ether diamine conferred the polymer prepared thereof with enhanced solubility, low‐moisture absorption, and low dielectric constants. The polyimides also exhibited exceptional thermal stability, good mechanical properties, and excellent hygrothermal resistance. These outstanding combined features ensure the polymers are desirable candidate materials for advanced microelectronics applications. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2581–2590, 2001     

Synthesis of herbicidal 3‐substituted‐4(3H)‐pyrimidinones under high pressure

The reaction of an N‐monosubstituted amidine with a β‐ketoester to afford a pyrimidinone is sluggish at best under normal conditions. We now report that this reaction can be effected in moderate yield under high pressure. Thus, 2,6‐dichloro‐4‐pyridyl‐(N‐prop‐2‐ynyl)carboxamidine (4b) was reacted with three α‐substituted‐β‐ketoesters (2b‐d) at 10–16 kbar to afford herbicidal 2‐(2,6‐dichloro‐4‐pyridyl)‐3‐(prop‐2‐ynyl)‐4(3H)‐pyrimidinones 5b and 5c in 15 ‐ 43% yield. This result expands the scope of reactions promoted by application of high pressure.     

A novel route to 4‐oxy/thio substituted‐1H‐pyrazol‐5(4H)‐ones via efficient cross‐Claisen condensation

α‐Oxy/thio substituted β‐keto esters were synthesized through an efficient cross‐Claisen condensation of oxy/thio substituted acetic acid ethyl esters with acid chlorides, which in turn converted in situ into 4‐oxy/thio substituted‐1H‐pyrazol‐5(4H)‐ones by the addition of hydrazine and its derivatives. This method has been found to be extremely fast, general, and useful toward the synthesis of inaccessible pyrazolones and synthetically demanding 4‐oxy/thio substituted pyrazolones. J. Heterocyclic Chem., (2011).     

Mild and efficient synthesis of aryliodonium ylides of 2,6‐dimethylpyrimidin‐4‐ol

Mild and efficient synthesis of new synthetically useful aryliodonium ylides of 2,6‐dimethyl‐ pyrimidin‐4‐ol ( 3a–d ) using (dichloroiodo)arenes in aqueous medium is reported. Antibacterial activity of these ylides 3a–d against Escherichia coli and Bacillus Licheniformis is also described. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:339–342, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20608     

An efficient microwave‐assisted synthesis of 3,5‐unsubstituted 4‐substituted‐6‐aryl‐3,4‐dihydropyridin‐2(1H)‐ones derivatives

Small libraries of 3,5‐unsubstituted 4‐substituted‐6‐aryl‐3,4‐dihydropyridin‐2(1H)‐ones derivatives were synthesized from the condensation‐products of aldehydes with Meldrum's acid, aromatic ketones and ammonium acetate using acetic acid as energy transferring‐agent under microwave irradiation without catalyst. This method has the advantages of excellent yields (65‐90%), short reaction time (5‐10 min) and being environmentally friendly. It aimed to provide new series of potential biologically active compounds for biomedical screening.     

1,2,3‐Trimethoxy‐4‐[(E)‐2‐phenylvinyl]benzene and (E,E)‐1,4‐bis(2,3,4‐trimethoxyphenyl)buta‐1,3‐diene

The stilbene derivative 1,2,3‐trimethoxy‐4‐[(E)‐2‐phenylvinyl]benzene, C₁₇H₁₈O₃, (I), and its homocoupling co‐product (E,E)‐1,4‐bis(2,3,4‐trimethoxyphenyl)buta‐1,3‐diene, C₂₂H₂₆O₆, (II), both have double bonds in trans conformations in their conjugated linkages. In the structure of stilbene (I), the aromatic rings deviate significantly from coplanarity, in contrast with coproduct (II), the core of which is rigorously planar. The deviation in stilbene (I) seems to be driven by intermolecular electrostatic interactions. Diene (II) sits on a crystallographic inversion centre, which bisects the conjugated linkage.     

Synthesis of (3‐N‐substituted‐piperidin‐4‐ylidene)acetic Acid Ethyl Esters

A convenient preparation of skeletons 2A and 2B (cyclic γ,δ‐diamino‐α,β‐unsaturated esters) is reported by a three‐step synthetic route based on a sequence of NBS‐mediated one‐pot α‐bromination/Wittig olefination of piperidin‐4‐one 3 , nucleophilic addition with NaN₃, and followed by PPh₃‐promoted Staudinger reduction/substitution or CuI‐catalyzed Huisgen 1,3‐dipolar cycloaddition.     

An efficient aerobic oxidative aromatization of Hantzsch 1,4-dihydropyridines and 1,3,5-trisubstituted pyrazolines

4-Substituted Hantzsch 1,4-dihydropyridines and 1,3,5-trisubstituted pyrazolines were oxidized to the corresponding pyridines and pyrazoles, respectively, in high yields by molecular oxygen in the presence of catalytic amount of N-hydroxyphthalimide (NHPI) and Co(OAc)₂ in acetonitrile at room temperature.     

An Efficient Synthesis of 4‐Arylmethylidene‐3‐substituted‐Isoxazol‐5(4H)‐ones in Aqueous Medium

A series of 4‐arylmethylidene‐3‐substituted‐isoxazol‐5(4H)‐ones were efficiently synthesized by eco‐benign, one pot uncatalyzed reaction of β‐keto‐ester, hydroxylamine hydrochloride, and aromatic aldehyde with electron donating substituent in water.     

Synthesis and characterization of fluorinated poly(amide imide)s derived from 1,4‐bis(2′‐trifluoromethyl‐4′‐trimellitimidophenoxy)benzene and aromatic diamines

A series of fluorinated poly(amide imide)s were prepared from 1,4‐bis(2′‐trifluoromethyl‐4′‐trimellitimidophenoxy)benzene and various aromatic diamines [3,3′,5,5′‐tetramethyl‐4,4′‐diaminediphenylmethane, α,α‐bis(4‐amino‐3,5‐dimethyl phenyl)‐3′‐trifluoromethylphenylmethane, 1,4‐bis(4′‐amino‐2′‐trifluoromethylphenoxy)benzene, 4‐(3′‐trifluoromethylphenyl)‐2,6‐bis(3′‐aminophenyl)pyridine, and 1,1‐bis(4′‐aminophenyl)‐1‐(3′‐trifluoromethylphenyl)‐2,2,2‐trifluoroethane]. The fluorinated poly(amide imide)s, prepared by a one‐step polycondensation procedure, had good solubility both in strong aprotic solvents, such as N‐methyl‐2‐pyrrolidinone, dimethylacetamide, dimethylformamide, dimethyl sulfoxide, and cyclopentanone, and in common organic solvents, such as tetrahydrofuran and m‐cresol. Strong and flexible polymer films with tensile strengths of 84–99 MPa and ultimate elongation values of 6–9% were prepared by the casting of polymer solutions onto glass substrates, followed by thermal baking. The poly(amide imide) films exhibited high thermal stability, with glass‐transition temperatures of 257–266 °C and initial thermal decomposition temperatures of greater than 540 °C. The polymer films also had good dielectric properties, with dielectric constants of 3.26–3.52 and dissipation factors of 3.0–7.7 × 10^?3, and acceptable electrical insulating properties. The balance of excellent solubility and thermal stability associated with good mechanical and electrical properties made the poly(amide imide)s potential candidates for practical applications in the microelectronics industry and other related fields. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1831–1840, 2003     

The Synthesis of (4E)‐N‐(4‐chlorophenyl)‐5‐substituted‐2‐diazo‐3‐oxopent‐4‐enoic Acid Amides

The (4E)‐N‐(4‐chlorophenyl)‐5‐(3‐chlorophenyl)‐2‐diazo‐3‐oxopent‐4‐enoic acid amides 5a˜j were synthesized with N‐(4‐chlorophenyl)‐2‐diazo‐3‐oxobutyramide 4 from p‐chloroaniline and various arylaldehydes. The yielded products 5a˜j were investigated with NMR, MS, IR, and X‐ray crystallographic techniques.     

Four Complexes with the Rigid Ligand 1,4‐Bis(1H‐imidazol‐4‐yl)benzene and Varied Carboxylate Ligands

Four metal‐organic coordination polymers [Co₂(L)₃(nipa)₂]·6H₂O ( 1 ), [Cd(L)(nipa)]·3H₂O ( 2 ), [Co(L) (Hoxba)₂] ( 3 ) and [Ni₂(L)₂(oxba)₂(H₂O)]·1.5L·3H₂O ( 4 ) were synthesized by reactions of the corresponding metal(II) salts with the rigid ligand 1,4‐bis(1H‐imidazol‐4‐yl)benzene (L) and different derivatives of 5‐nitroisophthalic acid (H₂nipa) and 4,4′‐oxybis(benzoic acid) (H₂oxba), respectively. The structures of the complexes were characterized by elemental analysis, FT‐IR spectroscopy and single‐crystal X‐ray diffraction. Complexes 1 and 3 have the same one‐dimensional (1D) chain while 2 is a 6‐connected twofold interpenetrating three‐dimensional (3D) network with α ‐Po 4¹²·6³ topology based on the binuclear Cd^II subunits. Compound 4 features a puckered two‐dimensional (2D) (4,4) network, and the large voids of the packing 2D nets have accommodated the uncoordinated L guest molecules. An abundant of N–H···O, O–H···O and C–H···O hydrogen bonding interactions exist in complexes 1–4 , which contributes to stabilize the crystal structure and extend the low‐dimensional entities into high‐dimensional frameworks. Lastly, the photoluminiscent properties of compounds 2 were also investigated.     

1,4‐Bis[(1‐methyl‐1‐phenylethyl)peroxymethyl]benzene

The title compound, C₂₆H₃₀O₄, is one of the first alkyl bis‐peroxides to be structurally characterized. The mol­ecule lies on a centre of inversion and therefore the terminal phenyl rings are parallel. Although there are three aromatic rings in the mol­ecule, the C—O—O—C torsion angle of 163.10 (10)° is close to the value found in Me₃COOCMe₃.