Microwave‐assisted “green” synthesis of 2‐alkyl/arylbenzothiazoles in one pot: A facile approach to anti‐tumor drugs

A series of new 2‐alkyl/arylbenzothiazoles has been synthesized on the basis of the potent and selective in vitro anti‐tumor properties of 2‐(3,4‐diethoxyphenyl)‐5‐fluorobenzothiazole. The synthesis of benzothiazole analogs was achieved via microwave irradiation of a 1:1 mixture of o‐aminothiophenol and alkyl/aryl acylacetonitriles at temperature of 200°C for 10 min. The yields are very good to excellent. All the products were characterized by ¹H nmr, ¹³C nmr and elemental analysis.     

Cobalt manganese oxide nanoparticles as recyclable catalyst for efficient synthesis of 2‐aryl‐1‐arylmethyl‐1H‐1,3‐benzimidazoles under solvent‐free conditions

Cobalt manganese oxide nanocatalyst was synthesized and it was found that it is a highly efficient green catalyst for the synthesis of 2‐aryl‐1‐arylmethyl‐1H‐1,3‐benzimidazoles under solvent‐free conditions. The marked advantages of this method are the simple experimental procedures, shorter reaction times, high yields of product, reusable and non‐toxic catalyst and solvent‐free conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

“One‐pot” synthesis of (Z)‐2‐aryl‐1‐(2‐cyanoethyl)ethenylphosphonates via hexamethylphosphoramide‐promoted sequential transformation

(Z)‐2‐Aryl‐1‐(2‐cyanoethyl)ethenylphosphonates were synthesized by the hexamethylphosphoramide‐promoted sequential transformation of tetra‐alkyl methanediphosphonates, by the action of potassium tert‐butoxide, and then by acrylonitrile and aldehydes. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:116–119, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10004     

Determination of “solvent” concentration in “chromatographic solutions” on the cellulose sorbents

An attempt was undertaken to furnish an entirely quantitative characteristics to the thermodynamic model of the chromatographic system presented in (2). The attempt proved to be successful and one managed to establish simultaneously a new method enabling direct determination of the hydrogen-bond enthalpy from the PC experimental results.     

A facile one‐pot synthesis of novel substituted 1,2,3,4‐tetrahydropyrimidine,part 2: Synthesis of 1‐(aralkyl/aryl)‐3‐(alkyl/aralkyl/aryl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines

1‐(Aralkyl/aryl)‐3‐(alkyyaralkyl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines ( 2a‐c ) have been synthesized by dethiomethylation of 5‐aroyl‐6‐methylthio‐1,2,3,4‐tetrahydropyrimidines ( 1a‐c ). An alternative one‐pot synthetic strategy has been developed for the title compounds 2a‐t by the reaction of enaminones 3 with pri mary amine and formaldehyde in refluxing methanol in good yields.     

Facile synthesis and antimicrobial properties of 2‐(substituted‐benzylsulfanyl)‐1h‐benzimidazoles

A simple and convenient procedure for the preparation of 2‐benzylthiobenzirnidazoles by the reaction of 2‐mercaptobenzimidazole and benzyl bromides in acetone/potassium carbonate condition has been reported and the compounds were screened for their potential antimicrobial activities.     

Mesoporous silica supported ytterbium as catalyst for synthesis of 1,2‐disubstituted benzimidazoles and 2‐substituted benzimidazoles

The benzimidazole ring is an important pharmacophore in contemporary drug discovery. Thus, effort to identifying new compounds containing benzimidazole scaffolds have gained much attention in recent years. In the present study, MCM‐41 type mesoporous silica with large pore (l‐MSN) supported ytterbium was successfully prepared by wet impregnation method. Among rare earth metal salts, ytterbium triflate has already been widely investigated as a catalyst in organic synthesis but less toxic ytterbium oxide has yet to be explored. Relatively high abundance and low cost of ytterbium with respect to many catalytically active metals (e.g. Pd, Au, Ru, Ir, Pt) offer an opportunity to develop sustainable catalysts for organic conversions. The catalyst has been characterized by various techniques including nitrogen adsorption, FT‐IR, TEM, SEM, EDX technique and elemental mapping. The obtained materials exhibit high surface area and a narrow distribution of mesoporosity. The catalytic performance of the Yb@l–MSNs was tested by synthesis of 1,2‐disubstituted benzimidazoles and 2‐substituted benzimidazoles through the coupling of aldehydes with o‐phenylenediamine. The catalyst resulted in excellent yields in short reaction times and the reaction showed tolerance toward both electron‐donating and electron‐withdrawing functional groups at room temperature. A particularly interesting finding was the solvent selectivity of this reaction; namely, 1,2‐disubstituted benzimidazoles generated as major product in water‐ethanol, while the 2‐substituted benzimidazoles was generated exclusively in non‐polar solvents like toluene.     

An efficient and facile procedure for the synthesis of 4,6‐diaryl‐2(1H)‐pyridones under solvent‐free conditions

An efficient and convenient method for the preparation of 4,6‐diaryl‐2(1H)‐pyridones by the one‐pot reaction of aromatic aldehydes, aromatic ketones and malononitrile, in the presence of sodium hydroxide under solventfree condition is reported. This method has the advantages of good yields, mild reaction conditions, easy workup, inexpensive reagents and being environmentally friendly over the existing procedures.     

Oxalic acid as a versatile catalyst for one pot facile synthesis of 3,4‐dihydropyrimidin‐2‐(1H)‐ones and their thione analogues

3,4‐Dihydropyrimidin‐2‐(1H)‐ones and their thione analogues are synthesized from the condensation of aromatic aldehydes, β‐dicarbonyl compound and urea or thiourea in presence of 5 mol% of oxalic acid in ethanol‐water (1:2; v/v) under mild reaction conditions. The yields obtained are better and also the use of very inexpensive catalyst, environmentally benign solvent and easy work‐up are the advantageous aspects of the present method.     

A Perylene Bisimide Cyclophane as a “Turn‐On” and “Turn‐Off” Fluorescence Probe

A rigid, covalently linked perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) cyclophane was synthesized by imidization of a bay‐substituted perylene bisanhydride with p‐xylylenediamine. The interchromophoric distance of approximately 6.5 Å establishes an ideal rigid cavity for the encapsulation of large aromatic compounds such as perylene and anthracene with binding constants up to 4.6×10⁴ M ^?1 (in CHCl₃). For electron‐poor guest molecules, the complexation process is accompanied by a significantly increased fluorescence, whereas the emission intensity is dramatically quenched by more electron‐rich guests because of the formation of charge‐transfer complexes. Furthermore, the influence of the PBI core twist on the binding constant results in a remarkable selectivity towards more flexible aromatic guest molecules.     

A simple synthesis of “queen substance”

A convenient synthesis of trans-9-oxodec-2-enoic acid is described.     

One‐pot solvent‐free synthesis of novel functionalized ethyl 2‐(alkylimino)‐4‐methyl‐3‐(alkanoyl)‐2,3‐dihydrothiazole‐5‐carboxylates

A green and efficient one‐pot two‐step synthesis of ethyl 2‐(alkylimino)‐4‐methyl‐3‐(alkanoyl)‐2,3‐dihydrothiazole‐5‐carboxylates from the reaction between acyl chlorides, ammonium thiocyanate, primary alkylamines, and ethyl 2‐chloroacetoacetae under mild, solvent‐ and catalyst‐free conditions at room temperature is presented. This efficient and straightforward technique gave the expected products in good to high yields in 2–4 hr without the creation of any by‐product in all reactions.     

“(Diphosphine)Nickel”‐Catalyzed Negishi Cross‐Coupling: An Experimental and Theoretical Study

The use of a strongly donating “(bis‐dialkylphosphine)Ni” fragment promotes the catalytic coupling of a large range of ArCl and ArZnCl derivatives under mild conditions. Stoichiometric mechanistic investigations and DFT calculations prove that a Ni⁰/Ni^II cycle is operative in this system.     

Synthesis of hantzsch 1,4‐dihydropyridines under solvent‐free condition using zn[(L)proline]2 as lewis acid catalyst

The present short communication describes a Lewis acid (Zn[(L)proline]₂) catalysed one pot synthesis of Hantzsch 1,4‐dihydropyridine (DHP) derivatives under solvent‐free condition by conventional heating and microwave irradiation. The Lewis acid catalyst Zn[(L)proline]₂ used in this reaction afford moderate to good yield. The catalyst is reusable upto five cycles without appreciable loss of its catalytic activity.     

“Smart” poly(2‐(dimethylamino)ethyl methacrylate‐ran‐9‐(4‐vinylbenzyl)‐9H‐carbazole) copolymers synthesized by nitroxide mediated radical polymerization

A series of poly(2‐(dimethylamino)ethyl methacrylate‐ran‐9‐(4‐vinylbenzyl)‐9H‐carbazole) (poly(DMAEMA‐ran‐VBK)) random copolymers, with VBK molar feed compositions f_VBK,0 = 0.02–0.09, were synthesized using 10 mol % [tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino] nitroxide (SG1) relative to 2‐([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino]oxy)‐2‐methylpropionic acid (BlocBuilder) at 80 °C and 90 °C. Controlled polymerizations were observed, even with f_VBK,0 = 0.02, as reflected by a linear increase in number average molecular weight (M_n) versus conversion X ≤ 0.6 with final copolymers characterized by relatively narrow, monomodal molecular weight distributions (M_w/M_n ≈ 1.5). Poly(DMAEMA‐ran‐VBK) copolymers were deemed sufficiently pseudo‐“living” to reinitiate a second batch of N,N‐dimethylacrylamide (DMAA), with very few apparent dead chains, as indicated by the monomodal shift in the gel permeation chromatography chromatograms. Poly(DMAEMA‐ran‐VBK) random copolymers exhibited tuneable lower critical solution temperature (LCST), in aqueous solution, by modifying copolymer composition, solution pH and by the addition of the water‐soluble poly(DMAA) segment. ¹H NMR analysis determined that, in water, the VBK units of the poly(DMAEMA‐ran‐VBK) random copolymer were segregated to the interior of the copolymer aggregate regardless of solution temperature and that poly(DMAEMA‐ran‐VBK)‐b‐poly(DMAA) block copolymers formed micelles above the LCST. In addition, the final random copolymer and block copolymer exhibited temperature dependent fluorescence due to the VBK units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A “self‐pinning” adhesive based on responsive surface wrinkles

Surface wrinkles are interesting since they form spontaneously into well‐defined patterns. The mechanism of formation is well‐studied and is associated with the development of a critical compressive stress that induces the elastic instability. In this work, we demonstrate surface wrinkles that dynamically change in response to a stimulus can improve interfacial adhesion with a hydrogel surface through the dynamic evolution of the wrinkle morphology. We observe that this control is related to the local pinning of the crack separation pathway facilitated by the surface wrinkles during debonding, which is dependent on the contact time with the hydrogel. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Synthesis of 2‐(1‐methyl‐1,2,5,6‐tetrahydropyridin‐3‐yl)benzimidazoles

A useful approach for the synthesis of pharmacologically active tetrahydropyridinylbenzimidazoles is described. 2‐Pyridin‐3‐ylbenzimidazoles 3a‐d have been synthesized by condensation of 3‐pyridinecarbox‐aldehyde 1 with substituted 1,2‐phenylenediamines 2a‐d following oxidative cyclization with iodobenzene diacetate. Methylation of 3a‐d with iodomethane and potassium hydroxide, subsequent formation of methylpyridinium salts 4a‐d and 7a‐d and reduction thereafter afforded tetrahydropyridinylbenzimidazoles 5a‐d and 8a‐d .     

“Continuous” emulsifier‐free emulsion polymerization for the synthesis of monodisperse polymeric latex particles

A “continuous” emulsifier‐free emulsion copolymerization (CEFEP) of styrene and divinylbenzene (DVB) or methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) has been devised to produce uniform polymeric microspheres of narrow size distribution from 74 nm to 2 μm, depending on reaction time. Monomer and crosslinker vapors were fed continuously into a small reactor. We suggest that after initial nucleation, subsequent CEFEP proceeds near the surfaces of growing particles in a monomer‐swollen outer shell. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3181–3187, 2000