Ionic liquids as mobile phase additives in high-performance liquid chromatography with electrochemical detection: Application to the determination of heterocyclic aromatic amines in meat-based infant foods

The beneficial effects of several ionic liquids (ILs) as mobile phase additives in high-performance liquid chromatography with electrochemical detection for the determination of six heterocyclic aromatic amines (HAs) have been evaluated for first-time. The studied ionic liquids were 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF₄), 1-hexyl-3-methylimidazolium tetrafluoroborate (HMIm-BF₄) and 1-methyl-3-octylimidazolium tetrafluoroborate (MOIm-BF₄). Several chromatographic parameters have been evaluated in the presence or absence of ILs, or using ammonium acetate as the most common mobile phase additive, with three different C18 stationary phases. The effect of the acetonitrile content was also addressed. In general, best resolution, lower peak-widths (up to 72.1% lower) and lower retention factors are obtained when using ILs rather than ammonium acetate as mobile phase additives. The main improvement was obtained in the baseline noise, being 360% less noisy for BMIm-BF₄, 310% for HMIm-BF₄, and 227% for MOIm-BF₄, when compared to ammonium acetate at +1000 mV. Different chromatographic methods using the best conditions for each IL were also evaluated and compared. Finally, the best chromatographic conditions using 1 mM of BMIm-BF₄ as mobile phase additive, the Nova-Pak^® C18 column, 19% (v/v) of acetonitrile content in the mobile phase, and +1000 mV in the ECD, have been applied for the chromatographic analysis of six HAs contained in meat-based infant foods. The whole extraction method of meat-based infant foods using focused microwave-assisted extraction and solid-phase extraction has also been optimized. Extraction efficiencies up to 89% and detection limits ranged between 9.30 and 0.165 ng g⁻¹ have been obtained under optimized conditions.     

Ionic liquids as desorption solvents and memory effect suppressors in heterocyclic aromatic amines determination by SPME–HPLC fluorescence

The beneficial effects of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF₄) ionic liquid (IL) as mobile phase additive, desorption solvent, and memory effect suppressor in solid-phase microextraction (SPME)–high-performance liquid chromatography with fluorescence detection for the determination of six heterocyclic aromatic amines have been evaluated for the first time. Several chromatographic parameters have been evaluated in the presence or absence of IL or using triethylamine as the most common mobile phase additive, with a Nova-Pak® C18 stationary phase. This IL was found to be clearly superior to triethylamine for efficiency as well as peak shape enhancement and sensitivity increase. SPME was chosen because it is faster than conventional extraction techniques and allowed us to minimize the use of organic solvents. However, memory effect may become a problem when a high-sensitivity detector is used. The appropriate conditions for the desorption step and to eliminate the memory effect involving BMIm-BF₄ were established and optimized. The method was applied for the determination of these compounds in commercial meat extracts.     

The role of the dual nature of ionic liquids in the reversed-phase liquid chromatographic separation of basic drugs

The cationic nature of basic drugs gives rise to broad asymmetrical chromatographic peaks with conventional C18 columns and hydro-organic mixtures, due to the ionic interaction of the positively charged solutes with the free silanol groups on the alkyl-bonded reversed-phase packing. Ionic liquids (ILs) have recently attracted some attention to reduce this undesirable silanol activity. ILs are dual modifiers (with a cationic and anionic character), which means that both cation and anion can be adsorbed on the stationary phase, giving rise to interesting interactions with the anionic free silanols and the cationic basic drugs. A comparative study of the performance of four imidazolium-based ILs as modifiers of the chromatographic behaviour of a group of β-blockers is shown. The ILs differed in the adsorption capability of the cation and anion on C18 columns. Mobile phases without additive and containing a cationic (triethylamine, TEA) or anionic (sodium dodecyl sulphate, SDS) additive were used as references for the interpretation of the behaviours. The changes in the nature of the chromatographic system, at increasing concentration of the additives, were followed based on the changes in retention and peak shape of the β-blockers. The silanol suppressing potency of the additives, and the association constants between the solutes and modified stationary phase or additive in the mobile phase, were estimated. The study revealed that SDS and the ionic liquid 1-hexyl-3-methylimidazolium tetrafluoroborate are the best enhancers of chromatographic peak shape among those studied.     

Isocratic Separation of Dansylated Biogenic Amines on a C8‐Bonded Silica Column under the LC Elution of Methanol‐Based Mobile Phase

Under the elution of methanol‐based mobile phase, the isocratic resolution of 12 biogenic amines, including 1 aromatic, 2 heterocyclic and 9 aliphatic amines, as the dansylated derivatives has been accomplished in less than 25 minutes on a 15 cm C₈‐bonded column. The resolution can not be reproduced on other examined alkyl‐bonded phases (e.g., C₄ and C₁₈) under the same chromatographic conditions, or in the reversed‐phase mode. The retention, mainly as a result of hydrophobic interaction between analyte and stationary phase, can be adjusted by varying the percentage of methanol in the mobile phase. Also, incorporating acetic acid as additive to the mobile phase to protonate the analyte and silanol groups that are little shielding on the surface of silica gel reduces the dipole‐dipole interaction, and thus the retention scale, which in turn deteriorates the resolution. Furthermore, the elution reversal is plausible for some of analytes as a greater percent of acetic acid is used in the elution. Values of correlation coefficients (R²) range between 0.9995 and 0.9996, indicating good linearity.     

离子液体作高效液相色谱流动相添加剂分离测定芳香胺

建立了以离子液体作反相高效液相色谱流动相添加剂分离测定邻苯二胺、苯胺和对甲苯胺3种芳香胺的方法。实验以C18反相色谱柱为分离柱,采用紫外检测方法,考察了检测波长、甲醇含量、咪唑离子液体烷基链长度、离子液体溶液浓度等条件对分离和测定的影响,并与其它分离测定芳香胺的方法进行了比较。优化的色谱条件为:以甲醇/1-丁基-3-甲基咪唑四氟硼酸盐水溶液(3.0mmol/L,乙酸调节pH 3.5)=30/70(V/V)为流动相;检测波长254 nm;流速1.0mL/min;柱温30℃。在此条件下,3种芳香胺达到基线分离,在6.5 min之内分离完全;在1～40 mg/L范围内,线性回归方程的相关系数达到0.99以上;检出限为0.07～0.41 mg/L。将本方法应用于废水的测定,加标回收率在92.3%～96.7%之间,相对标准偏差小于3.5%。     

A Fast and Highly Efficient Protocol for Reductive Amination of Aromatic Aldehydes Using NaBH4 and Isoxazole Amines in an Ionic Liquid Medium

Reductive amination of aromatic aldehydes using NaBH₄ and isoxazole amines is carried out in a Brønsted acidic ionic liquid 1‐methylimidazolium tetrafluoroborate [(HMIm)BF₄]. The ionic liquid plays dual roles of solvent as well as catalyst for the efficient transformation of aromatic aldehydes to heterocyclic substituted amines in excellent yields without any undesired side product formation. The newly synthesized compounds ( 3 , 6 and 7 ) were characterized by IR, ¹H NMR and mass spectral techniques.     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Simultaneous determination of three alkaloids in Huangbo using an ionic liquid as a mobile phase additive in reversed‐phase liquid chromatography

A reversed‐phase high‐performance liquid chromatography method for the simultaneous determination of jatrorrhizine, palmatine, and berberine in Huangbo, the dried bark of Chinese Corktree, was established by using 1‐hexyl‐3‐methylimidazolium tertafluoroborate as a mobile phase additive. The chromatographic behavior of the three compounds on the C₁₈ column was studied with four different types of 1‐alkyl‐3‐methylimidazolium‐based ionic liquids as the mobile phase additives. The effect of 1‐hexyl‐3‐methylimidazolium tertafluoroborate was the best in the four investigated ionic liquids. The concentration of 1‐hexyl‐3‐methylimidazolium tertafluoroborate and the pH of the mobile phase, which influenced the chromatographic behaviors of the three bioactive compounds, were investigated. The linearity, precision, accuracy, repeatability, limit of detection, and quantification of the proposed method were found to be satisfactory. To explain the role of ionic liquids as the mobile phase additives, the possible mechanism was also explored and discussed.     

Open tubular columns with mixed‐mode reversed‐phase and weak anion‐exchange stationary phase for capillary electrochromatography

Columns for open tubular capillary electrochromatography, coated with a mixed‐mode (RP/ion‐exchange) stationary phase, were prepared by using the sol–gel method. The synthetic procedure was optimized by changing the ratios of tetraethoxysilane, octyltriethoxysilane, and 3‐aminopropyltriethoxysilane in the initial sol. SEM studies reveal that a coating with about 400 nm thickness can be obtained. The inner surface properties of these capillaries were probed by measuring the EOF as a function of pH. The surface of this stationary phase contains octyl, amine, and residual silanol moieties; the amine and silanol groups determine the net charge on the inner surface of the capillary and can produce a switchable EOF (anodal/cathodal). The performances of the columns were evaluated by open tubular capillary electrochromatography using a wide range of compounds (polycyclic aromatic hydrocarbons, aromatic acids, and aromatic amines).     

Synthesis and Characterisation of Fluorescent Carbon Nanodots Produced in Ionic Liquids by Laser Ablation

Carbon nanodots (C‐dots) with an average size of 1.5 and 3.0 nm were produced by laser ablation in different imidazolium ionic liquids (ILs), namely, 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate (BMI.BF₄), 1‐n‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf₂) and 1‐n‐octyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (OMI.NTf₂). The mean size of the nanoparticles is influenced by the imidazolium alkyl side chain but not by the nature of the anion. However, by varying the anion (BF₄ vs. NTf₂) it was possible to detect a significant modification of the fluorescence properties. The C‐dots are much probably stabilised by an electrostatic layer of the IL and this interaction has played an important role with regard to the formation, stabilisation and photoluminescence properties of the nanodots. A tuneable broadband fluorescence emission from the colloidal suspension was observed under ultraviolet/visible excitation with fluorescence lifetimes fitted by a multi‐exponential decay with average values around 7 ns.     

On the use of ionic liquids as mobile phase additives in high-performance liquid chromatography. A review

The popularity of ionic liquids (ILs) has grown during the last decades in several analytical separation techniques. Consequently, the number of reports devoted to the applications of ILs is still increasing. This review is focused on the use of ILs (mainly imidazolium-based associated to chloride and tetrafluoroborate) as mobile phase additives in high-performance liquid chromatography (HPLC). In this approach, ILs just function as salts, but keep several kinds of intermolecular interactions, which are useful for chromatographic separations. Both cation and anion can be adsorbed on the stationary phase, creating a bilayer. This gives rise to hydrophobic, electrostatic and other specific interactions with the stationary phase and solutes, which modify the retention behaviour and peak shape. This review updates the advances in this field, with emphasis on topics not always deeply considered in the literature, such as the mechanisms of retention, the estimation of the suppressing potency of silanols, modelling and optimisation of the chromatographic performance, and the comparison with other additives traditionally used to avoid the silanol problem.     

Determination of triazine herbicides in juice samples by microwave‐assisted ionic liquid/ionic liquid dispersive liquid–liquid microextraction coupled with high‐performance liquid chromatography

A novel microextraction method, termed microwave‐assisted ionic liquid/ionic liquid dispersive liquid–liquid microextraction, has been developed for the rapid enrichment and analysis of triazine herbicides in fruit juice samples by high‐performance liquid chromatography. Instead of using hazardous organic solvents, two kinds of ionic liquids, a hydrophobic ionic liquid (1‐hexyl‐3‐methylimidazolium hexafluorophosphate) and a hydrophilic ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate), were used as the extraction solvent and dispersion agent, respectively, in this method. The extraction procedure was induced by the formation of cloudy solution, which was composed of fine drops of 1‐hexyl‐3‐methylimidazolium hexafluorophosphate dispersed entirely into sample solution with the help of 1‐butyl‐3‐methylimidazolium tetrafluoroborate. In addition, an ion‐pairing agent (NH₄PF₆) was introduced to improve recoveries of the ionic liquid phase. Several experimental parameters that might affect the extraction efficiency were investigated. Under the optimum experimental conditions, the linearity for determining the analytes was in the range of 5.00–250.00 μg/L, with the correlation coefficients of 0.9982–0.9997. The practical application of this effective and green method is demonstrated by the successful analysis of triazine herbicides in four juice samples, with satisfactory recoveries (76.7–105.7%) and relative standard deviations (lower than 6.6%). In general, this method is fast, effective, and robust to determine triazine herbicides in juice samples.     

Ionic Liquid Mediated Synthesis of Lath Shaped CuO Micro‐Assembles as Extremely Stable Anode Material for Lithium‐Ion Batteries

A novel lath‐shaped CuO microassemble consisting of well‐crystalized ultrafine nanocrystals was prepared by an ionothermal method with the assistance of ionic liquids (ILs , 1‐butyl‐3‐methylimidazolium tetrafluoroborate). As anode material of lithium ion batteries, the ILs‐CuO exhibits high specific capacity, durability and good rate performance, superior to bare CuO . At a high current density of 1000 mA •g⁻¹, after 100 cycles, ILs‐CuO still retains a discharge capacity of 483.2 mAh •g⁻¹. The improved electrochemical performances could be ascribed to the unique microscale lath‐shape CuO assembles composed of ultrafine nanostructure.     

Influence of ionic liquids as electrolyte additives on chiral separation of dansylated amino acids by using Zn(II) complex mediated chiral ligand exchange CE

In this work, investigation of the comparative influence of diverse ionic liquids (ILs) as electrolyte additives on the chiral separation of dansylated amino acids by using Zn(II)‐L‐arginine complex mediated chiral ligand exchange CE (CLE‐CE) was conducted. It has been found that not only the varied substituted group number, but also the alkyl chain length of the substituted group on imidazole ring in the structure of ILs show different influence on chiral separation of the analytes in the CLE‐CE system, which could be understood by their direct influence on EOF. Meanwhile, the variation of anion in the structure of ILs displayed remarkably changed performance and the ILs with Cl^? showed the most obvious promoting effect on the chiral separation performance. Among the investigated seven ILs, 1‐butyl‐3‐methylimidazolium chloride was validated to be the proper electrolyte additive in the CLE‐CE system. Moreover, it has been observed that 1‐butyl‐3‐methylimidazolium chloride also has obvious promotive effect on the labeling performance. The results have demonstrated that the ILs with different structures have important relation to their performance in CLE‐CE and to their labeling efficiency in dansylation of the analytes.     

Co‐electroosmotic capillary electrophoresis of basic proteins with 1‐alkyl‐3‐methylimidazolium tetrafluoroborate ionic liquids as non‐covalent coating agents of the fused‐silica capillary and additives of the electrolyte solution

The paper reports the results of a study carried out to evaluate the use of three 1‐alkyl‐3‐methylimidazolium‐based ionic liquids as non‐covalent coating agents for bare fused‐silica capillaries and additives of the electrolyte solutions (BGE) for CE of basic proteins in the co‐EOF separation mode. The three ionic liquids are differentiated from each other by the length of the alkyl group on the imidazolium cation, consisting of either an ethyl, butyl or octyl substituent, whereas tetrafluoroborate is the common anionic component of the ionic liquids. Coating the capillary with the ionic liquid resulted in improved peak shape and protein separation, while the EOF was maintained cathodic. This indicates that each ionic liquid is effective at masking the protein interaction sites on the inner surface of the capillary, also when its adsorption onto the capillary wall has not completely neutralized all the negative charges arising from the ionization of the silanol groups and the ionic liquid is not incorporated into the BGE employed for separation. Using the coated capillaries with BGE containing the ionic liquid employed for the coating, at concentration low enough to maintaining the EOF cathodic, both peak shape and protein separation varied to different extents, based on the particular ionic liquid used and its concentration. Fast and efficient separation of the model basic protein mixture in co‐electroosmotic CE is obtained with the 1‐butyl‐3‐methylimidazolium tetrafluoroborate coated capillary and 100 mM acetate buffer (pH 4.0) containing 4.4 mM 1‐butyl‐3‐methylimidazolium tetrafluoroborate as the BGE.     

Ionic liquids as mobile phase additives for determination of thiocyanate and iodide by liquid chromatography

An analytical method was developed for the simultaneous determination of thiocyanate and iodide by reversed‐phase liquid chromatography with UV detection using imidazolium ionic liquids as mobile phase additives. The chromatographic behaviors of the two anions on a C₁₈ column were studied and compared with four types of reagents including imidazolium ionic liquids, pyridinium ionic liquids, 4‐aminophenol hydrochloride and tetrabutylammonium as mobile phase additives. The effects of the concentrations of imidazolium ionic liquids, organic solvents and detection wavelength on separation and detection of the anions were investigated. The role of ionic liquids, retention rules and mechanisms were discussed. The separation of the anions was performed on the C₁₈ reserved‐phase column using acetonitrile‐0.3 mmol/L 1‐amyl‐3‐methylimidazolium tetrafluoroborate (10:90, v/v) as mobile phase, with column temperature of 35°C, flow rate of 1 mL/min and detection wavelength of 210 nm. Under these conditions, the two anions can be completely separated within 6 min. The limits of detection were 0.05 mg/L. The method was applied for the determination of thiocyanate and iodide in ionic liquid samples and iodide drugs, and the spiked recoveries ranged from 97 to 101%. The method is simple, accurate and meets the requirements of quantitative analysis for thiocyanate and iodide.     

Effect of Ionic Liquid Structure on the Electrochemical Response of Dopamine at Room Temperature Ionic Liquid‐modified Carbon Paste Electrodes (IL–CPE)

In this work 12 different ionic liquids (ILs) have been used added as co‐binders in the preparation of modified carbon paste electrodes (IL–CPEs) used for the voltammetric analysis of dopamine in Britton‐Robinson buffer. The ionic liquids studied were selected based on three main criteria: (1) increasing chain length of alkyl substituents (studying 1‐ethylimidazolium and ethyl, propyl, butyl, hexyl and decylmethylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids); (2) nature of the counter ion (dicyanamide, bis(trifluoromethylsulfonyl)imide and hexafluorophosphate) in 1‐butyl‐3‐methylimidazolium ionic liquids; and (3) cation ring structures (1‐butyl‐3‐methylimidazolium, 1‐butyl‐1‐methylpiperidinium, 1‐butyl‐1‐methylpyrrolidinium and 1‐butyl‐3‐methylpyridinium) in bis(trifluoromethylsulfonyl)imide or hexafluorophosphate (1‐butyl‐3‐methylimidazolium or 1‐butyl‐3‐methylpyridinium as cations) ionic liquids. The use of IL as co‐binders in IL–CPE results in a general enhancement of both the sensitivity and the reversibility of dopamine oxidation. In square wave voltammetry experiments, the peak current increased up to a 400 % when 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide was used as co‐binder, as compared to the response found with the unmodified CPE. Experimental data provide evidence that electrostatic and steric effects are the most important ones vis‐à‐vis these electrocatalytic effects on the anodic oxidation of dopamine on IL–CPE. The relative hydrophilicity of dicyanamide anions reduced the electrocatalytic effects of the corresponding ionic liquids, while the use of 1‐ethyl‐3‐methylimidazolium hexafluorophosphate or 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (two relatively small and highly hydrophobic ionic liquids) as co‐binders in IL–CPE resulted in the highest electrocatalytic activity among all of the IL–CPE studied.     

Reversed-phase liquid chromatographic separation of antiretroviral drugs on a monolithic column using ionic liquids as mobile phase additives

The use of 3-methylimidazolium cation-based ionic liquids (ILs) was evaluated as mobile phase additives for separation of antiretroviral drugs on a monolithic column by RP-HPLC. Separation of eight commonly used antiretroviral drugs was achieved on a Chromolith Flash, RP-18e column (25 × 4.6 mm, porous material) using water (pH 4.0 adjusted with acetic acid)/methanol v/v as a mobile phase containing ILs in a gradient elution mode. The effects of concentrations of ILs on retention, resolution and peak shape were studied and a regression equation correlating the interactions between stationary phase and the ILs was established. The retention of all the drugs was decreased notably by using 1-butyl-3-methylimidazolium tetrafluoroborate, while 1-ethyl-3-methylimidazolium methylsulfate reduced gradient drift drastically when compared to triethylamine.     

1-萘甲膦酸改性氧化锆固定相分离芳胺类化合物的色谱性能研究

研究了一些芳胺类化合物在1-萘甲膦酸改性氧化锆固定相上的色谱行为。分别考察了流动相中甲醇含量、缓冲液pH值和离子强度等对芳胺类化合物色谱保留的影响,并对这类化合物在该固定相上的保留机理进行了探讨。研究结果表明,芳胺类化合物在该固定相上表现出反相和阳离子交换的混合保留模式。以pH 10.1的Tris-甲醇(60/40,V/V)溶液为流动相,在1-萘甲膦酸改性氧化锆固定相上成功分离了间苯二胺、邻甲苯胺、N-甲苯胺、对硝基苯胺、邻硝基苯胺和α-甲萘胺6种芳胺类化合物。