Ab initio potential energy surface and vibration‐rotation energy levels of sulfur dioxide

An accurate potential energy surface of sulfur dioxide, SO₂, in its ground electronic state has been determined from ab initio calculations using the coupled‐cluster approach in conjunction with the correlation‐consistent basis sets up to septuple‐zeta quality. The results obtained with the conventional and explicitly correlated coupled‐cluster methods are compared. The role of the core–electron correlation, higher‐order valence–electron correlation, scalar relativistic, and adiabatic effects in determining the structure and dynamics of the SO₂ molecule is discussed. The vibration‐rotation energy levels of the ³²SO₂ and ³⁴SO₂ isotopologues were predicted using a variational approach. It was shown that the inclusion of the aforementioned effects was mandatory to attain the “spectroscopic” accuracy. © 2017 Wiley Periodicals, Inc.     

Ab initio potential energy surface and vibration‐rotation energy levels of silicon dicarbide,SiC2

The accurate ground‐state potential energy surface of silicon dicarbide, SiC₂, has been determined from ab initio calculations using the coupled‐cluster approach. Results obtained with the conventional and explicitly correlated coupled‐cluster methods were compared. The core‐electron correlation, higher‐order valence‐electron correlation, and scalar relativistic effects were taken into account. The potential energy barrier to the linear SiCC configuration was predicted to be 1782 cm^?1. The vibration‐rotation energy levels of the SiC₂, ²⁹SiC₂, ³⁰SiC₂, and SiC¹³C isotopologues were calculated using a variational method. The experimental vibration‐rotation energy levels of the main isotopologue were reproduced to high accuracy. In particular, the experimental energy levels of the highly anharmonic vibrational ν₃ mode of SiC₂ were reproduced to within 6.7 cm^?1, up to as high as the v₃ = 16 state.     

Ab initio potential energy surface and excited vibrational states for the electronic ground state of Li_2H

A 285-pomt multi-reference configuration-interaction involving single and double excitations ( MRS DCI) potential energy surface for the electronic ground state of L12H is determined by using 6-311G (2df,2pd)basis set.A Simons-Parr-Finlan polynomial expansion is used to fit the discrete surface with a x2 of 4.64×106 The equn librium geometry occurs at Rc=0.172 nm and,LiHL1=94.10°.The dissociation energy for reaction I2H(2A)→L12(1∑g)+H(2S) is 243.910 kJ/mol,and that for reaction L12H(2A')→HL1(1∑) + L1(2S) is 106.445 kl/mol The inversion barrier height is 50.388 kj/mol.The vibrational energy levels are calculated using the discrete variable representation (DVR) method.     

A fully ab initio potential energy surface for ClH2 reactive system

An ab initio analytical potential energy surface called BW3 for the ClH2 reactive system is presented. The fit of this surface is based on about 1 200 ab initio energy points, computed with multi-reference configuration interaction(MRCI) and scaling external correlation (SEC) method and a very large basis set. The precision in the fit is very high. The BW3 surface could reproduce correctly the dissociation energy of H2 and HCl, and the endothermicity of the Cl + H2 abstraction reaction. For the Cl + H2 abstraction reaction, the saddle point of BW3 lies in collinear geometries, and the barrier height is 32.84 kJ/mol; for the H + ClH exchange reaction, the barrier of BW3 is also linear, with a height of 77.40 kJ/mol.     

Ab initio potential energy surface and vibration‐rotation energy levels of beryllium monohydroxide

The accurate potential energy surface of beryllium monohydroxide, BeOH, in its ground electronic state has been determined from ab initio calculations using the coupled‐cluster approach in conjunction with the correlation‐consistent core‐valence basis sets up to septuple‐zeta quality. The higher‐order electron correlation, scalar relativistic, and adiabatic effects were taken into account. The BeOH molecule was confirmed to be bent at equilibrium, with the BeOH angle of 141.2° and the barrier to linearity of 129 cm⁻¹. The vibration‐rotation energy levels of the BeOH and BeOD isotopologues were predicted using a variational approach and compared with recent experimental data. The results can be useful in a further analysis of high‐resolution vibration‐rotation spectra of these interesting species. © 2016 Wiley Periodicals, Inc.     

Accurate ab initio potential energy surface and vibration‐rotation energy levels of hydrogen peroxide

The accurate ground‐state potential energy surface of hydrogen peroxide, H₂O₂, has been determined from ab initio calculations using the coupled‐cluster approach in conjunction with the correlation‐consistent basis sets up to septuple‐zeta quality. Results obtained with the conventional and explicitly correlated coupled‐cluster methods were compared. The core–electron correlation, scalar relativistic, and higher‐order valence–electron correlation effects were taken into account. The adiabatic effects were also discussed. The vibration–rotation energy levels of the H₂O₂, D₂O₂, and HOOD isotopologues were predicted, and the experimental vibrational fundamental wavenumbers were reproduced to 1 cm^?1 (“spectroscopic”) accuracy. © 2012 Wiley Periodicals, Inc.     

Theoretical studies on the potential energy surfaces and vibrational energy levels of HXeF and HXeCl

The potential energy surfaces for the electronic ground state of the HXeCl and HXeF molecules areconstructed by using the internally contracted multi-reference configuration interaction with theDavidson correction(icMRCI Q)method and large basis sets.The stabilities and dissociation barriersare identified from the potential energy surfaces.The three-body dissociation channel is found to bethe dominate dissociation channel for HXeCl,while two dissociation channels are possible and com-petitive for HXeF.Based on the obtained potentials,vibrational energy levels of HXeCl and HXeF arecalculated using the Lanczos algorithm.Our theoretical results are in good agreement with the avail-able observed values.Particularly,the calculated fundamental frequency of the H—Xe stretching vi-bration including the Xe matrix effect of HXeCl is found to be 1666.6 cm-1,which is only 17.6 cm-1higher than the recently observed value of 1649 cm-1.     

Ab initio potential energy surface and vibration–rotation energy levels of germanium dicarbide,GeC2

The accurate ground‐state potential energy surface of germanium dicarbide, GeC₂, has been determined from ab initio calculations using the coupled‐cluster approach. The core–electron correlation, higher‐order valence‐electron correlation, and scalar relativistic effects were taken into account. The potential energy surface of GeC₂ was shown to be extraordinarily flat near the T‐shaped equilibrium configuration. The potential energy barrier to the linear CCGe configuration was predicted to be 1218 cm⁻¹. The vibration–rotation energy levels of some GeC₂ isotopologues were calculated using a variational method. The vibrational bending mode ν₃ was found to be highly anharmonic, with the fundamental wavenumber being only 58 cm⁻¹. Vibrational progressions due to this mode were predicted for the , , and states of GeC₂. © 2018 Wiley Periodicals, Inc.     

Potential energy surfaces and vibrational spectra for isotopomers of N_2O

ＴｈｅＮ2Ｏｍｏｌｅｃｕｌｅｐｌａｙｓａｖｅｒｙｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｏｚｏｎｅｃｈｅｍｉｓｔｒｙｉｎｔｈｅａｔｏｍｏｓｐｈｅｒｅ.Ｉｔｓｒｏｖｉｂｒａｔｉｏｎａｌｓｐｅｃｔｒａｃａｎｐｒｏｖｉｄｅｕｓｅｆｕｌｉｎｆｏｒｍａｔｉｏｎａｂｏｕｔｔｈｅｉｎｔｒａｍｏｌｅｃｕｌａｒｄｙｎａｍｉｃｐｒｏｐｅｒｔｉｅｓ.Ｎ2Ｏｉｓａｌｉｎｅａｒｍｏｌｅｃｕｌｅａｔｔｈｅｅｑｕｉｌｉｂｒｉｕｍｇｅｏｍｅｔｒｙｆｏｒｔｈｅｅｌｅｃｔｒｏｎｉｃｇｒｏｕｎｄｓｔａｔｅ.Ｎｕｍｅｒｏｕｓｉｎｖｅｓｔｉｇａｔｉｏ…     

Potential energy surface and highly excited vibrational lines of NO2 via algebraic approach

The algebraic Hamiltonian of NO₂ is optimized using U(4) algebra via fitting to 102 observed vibrational lines. The RMS error of the fitting is 2.39 cm^?1. We calculated highly excited vibrational energy levels using this optimized Hamiltonian, and then obtained the potential energy surface for the electronic ground state by using the classical limit of the U(4) algebraic Hamiltonian. We also calculated the dissociation energies, the force constants etc. Our results are in good agreement with the other theoretical results. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Theoretical study of potential energy surface and vibrational spectra of ArF2 system

An ab initio potential energy surface (PES) of ArF2 system has been obtained by using MP4 calculation with a large basis set including bond functions. There are two local minimums on the PES: one is T-shaped and the other is L-shaped. The L-shaped minimum is the global minimum with a well depth of -119.62 cm- 1 at R = 0.3883nm. The T-shaped minimum has a well depth of -85.93cm -1 at R = 0.3486 nm. A saddle point is found at R = 0.3486 and θ = 61° with the well depth of -61.53 cm-1. The vibrational energy levels have been calculated by using VSCF-CI method. The results show that this PES supports 27 vibrational bound states, and the ground states are two degenerate states assigned to the L-type vibration.     

A fully ab initio potential energy surface for C1H_2 reactive system

An ab initio analytical potential energy surface called BW3 for the CIH2 reactive system is presented. The fit of this surface is based on about 1 200 ab initio energy points, computed with multi-reference configuration interaction(MRCI) and scaling external correlation (SEC) method and a very large basis set. The precision in the fit is very high. The BW3 surface could reproduce correctly the dissociation energy of H2 and HCI, and the endothermicity of the Cl H2 abstraction reaction. For the Cl H2 abstraction reaction, the saddle point of BW3 lies in collinear geometries, and the barrier height is 32.84 kJ/mol; for the H CIH exchange reaction, the barrier of BW3 is also linear, with a height of 77.40 kJ/mol.     

Ab initio potential energy surface and excited vibrational states for the electronic ground state of Li2H

A 285-point multi-reference configuration-interaction involving single and double excitations (MRS-DCI) potential energy surface for the electronic ground state of Li₂H is determined by using 6-311G (2df, 2pd) basis set. A Simons-Parr-Finlan polynomial expansion is used to fit the discrete surface with a X² of 4.64 × 10^-6. The equilibrium geometry occurs at R_e =0.172 nm and <LiHLi =94.10. The dissociation energy for reaction Li₂H(²A)⇑ Li₂(¹⌆_g)+H(²S) is 243.910 kJ/mol. and that for reaction Li₂H(²A)⇑HLi(¹be)+Li(²S) is 106.445 kJ/mol. The inversion barrier height is 50.388 kJ/mol. The vibrational energy levels are calculated using the discrete variable representation (DVR) method. Project supported by the National Natural Science Foundation of China (grant No. 29673029) and by the Special Doctoral Research Foundation of the State Education Commission of China.     

An ab initio potential energy surface and vibrational energy levels of HXeBr

A three-dimensional global potential energy surface for the electronic ground state of HXeBr molecule is constructed from more than 4200 ab initio points. These points are generated using an internally contracted multi-reference configuration interaction method with the Davidson correction （icMRCI ＋ Q） and large basis sets. The stabilities and dissociation barriers are identified from the potential energy surfaces. The three-body dissociation channel is found to be the dominate dissociation channel for HXeBr. Based on the obtained potentials, low-lying vibrational energy levels of HXeBr calculated using the Lanczos algorithm is found to be in good agreement with the available experimental band origins.     

Potential energy surfaces and vibrational spectra for isotopomers of N2O

Potential energy surfaces and vibrational spectra for the four isotopomers (^l5N¹⁴N¹⁶O,^l4N^I5N¹⁶O,¹⁵N₂ ¹⁶O and¹⁵N₂ ¹⁸O) of N₂O have been investigated with the vibrational self-consistent field-configuration interaction method. It is shown that the isotopomers with the same end atom have similar values of the potential parameters, and that substitution with different end atoms can affect the potential obviously. The calculated vibrational levels are in good agreement with the observed values by the optimization of several potential parameters (f ₁ ⁽¹⁾,f ₁₃ ⁽⁰⁾,f ₃ ⁽¹⁾ which are sensitive to isotopic substitutions. Project supported by the National Natural Science Foundation of China (Grant No. 29673029).     

OCS电子基态势能面与振动光谱的理论研究

本文采用键长-键角内标系下的自洽场-组态相互作用方法精确计算了OCS分子的振动高激发态能级,并结合实验观测到的振动能级利用非线性最小二乘法优化电子基态势能函数中的势能参数。由优化所得的势能面计算出的振动激发态能级与50个实验观测到的振动能级比较,标准偏差为0.08cm^-^1。此外,还用该势能面计算了OCS同位素分子的振动能级,计算结果与实验值也十分吻合。     

F2 dimer: Improved intermolecular potential energy surface using ab initio calculations

A computational study on the intermolecular potential energy of 44 different orientations of F₂ dimers is presented. Basis set superposition error (BSSE) corrected potential energy surface is calculated using the supermolecular approach at CCSD(T) and QCISD(T) levels of theory. The interaction energies obtained using the aug‐cc‐pVDZ and aug‐cc‐pVTZ basis sets are extrapolated to the complete basis set limit using the latest extrapolation scheme. The basis set effect is checked and it is found that the extrapolated intermolecular energies provide the best compromise between the accuracy and computational cost. Among 1320 energy points of F₂–F₂ system covering more relative orientations, the most stable structure of the dimers was obtained with a well depth of ?146.62 cm^?1 that related to cross configuration, and the most unstable structure is related to linear orientation with a well depth of ?52.63 cm^?1. The calculated second virial coefficients are in good agreement with experimental data. The latest extrapolation scheme of the complete basis set limit at the CCSD(T) level of theory is used to determine the intermolecular potential energy surface of the F₂ dimer. Comparing the results obtained by the latest scheme with those by older schemes show that the new approach provides the best compromise between accuracy and computational cost.     

构造SO~2分子势能面的李代数方法

把李代数方法得到的SO~2分子的代数Hamiltonian,利用相干态基经典化并找到一个新的变换,将分子的键角引入,而得到SO~2分子的势能面。由该势能面计算的解离能,所给出的势能面的立体图和相应的等高线以及力常数与其他方法给出的相一致。该方法可以推广到多原子分子及反应体系。     

Theoretical study on the potential energy surface and vibrational energy levels of HXeI

The potential energy surface for the electronic ground state of the HXeI molecule is constructed by using the internally contracted multi-reference configuration interaction with the Davidson correction（icMRCI＋Q）method and large basis sets. The stabilities and dissociation barriers are identified from the potential energy surfaces.The three-body dissociation channel is found to be the dominate dissociation channel for HXeI.Based on the obtained potentials,vibrational energy levels of HXeI are calculated using the Lanczos algorithm.Our theoretical results are in excellent agreement with the available observed values.     

Ab initio MO study of potential energy surface of NH2 with CN reaction

An extensive quantum chemical study of the potential energy surfaces (PES) for the association reaction of NH₂ with CN and the subsequent isomerization and dissociation reactions has been carried out using density functional theory (DFT)/B3LYP/6‐311++G(3df,2p) level of theory on both singlet and triplet states. The reaction mechanism on the triplet surface is more complicated than that on the singlet surface. A total of 19 isomers and 46 transition states have been identified and characterized on the triplet PES. Among them, IM2 (IM2a), IM3 (IM3a, IM3b), and IM10 are the lowest‐lying isomers with thermodynamic stability. Twenty available dissociation channels, depending on the different initial isomers, have been identified. On the singlet surface, only 12 isomers and 16 transition states have been found, and among them IM1(S) and IM2(S) are the lowest‐lying isomers. The higher isomerization and dissociation barriers on the singlet surface indicate that the addition and the subsequent reactions of NH₂+CN are most likely to occur on the triplet PES because of the lower barriers. A prediction can be made for the possible mechanism explaining the production of H+HNCN. Besides HNCN, other major products are NH+HCN and NH+HNC, which are produced by direct dissociation reactions from triplet IM2 and IM3, respectively. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006