Triphenylamine or carbazole-based benzothiadiazole luminophors with remarkable solvatochromism and different mechanofluorochromic behaviors

Two triphenylamine or carbazole-based benzothiadiazole luminophors have been successfully synthesized and characterized. Interestingly, both the donor-acceptor-donor (D-A-D) type compounds 1 and 2 exhibited remarkable solvatochromism behavior. In addition, luminogen 1 showed reversible mechanochromism phenomenon involving red-shifted fluorescent color transformation from yellow to red. However, luminogen 2 showed switchable mechanochromism behavior involving blue-shifted fluorescent color change from yellow to yellow-green.     

Tetraphenylethene-based highly emissive fluorescent molecules with aggregation-induced emission (AIE) and various mechanofluorochromic characteristics

Three tetraphenylethene-based compounds with different substituents were successfully synthesized. All these fluorescent molecules exhibited typical aggregation-induced emission (AIE) effect. In addition, these luminogens showed various mechanochromic luminescence phenomena. Moreover, the mechanofluorochromic behavior of luminogen 1 was self-reversible.     

A multifunctional aggregation-induced emission (AIE)-active fluorescent chemosensor for detection of Zn2+ and Hg2+

An aggregation-induced emission (AIE)-active fluorescent chemosensor based on a tetraphenylethene (TPE) unit has been successfully designed and synthesized. Interestingly, the luminogen could detect Zn²⁺ selectively in a THF solution with the detection limit of 1.24 × 10⁻⁶ mol L⁻¹. Meanwhile, the luminogen could also detect Hg²⁺ selectively in a THF-water mixture with the water content of 90%, and the detection limit was 2.55 × 10⁻⁹ mol L⁻¹. Furthermore, the solid-state mechanochromic fluorescence behavior of the luminogen was investigated systematically. Indeed, the AIE-active luminogen also exhibited reversible mechanofluorochromic phenomenon involving fluorescent color change from blue to green, and powder X-ray diffraction results indicated that the switchable morphology conversion between crystalline and amorphous states was responsible for this mechanochromism phenomenon.     

Aggregation-enhanced emission and efficient electroluminescence of conjugated polymers containing tetraphenylethene units

Tetraphenylethene (TPE) is a popular luminogen characterized by aggregation-induced emission and has been widely used to construct solid-state emissive materials. In this work, two thermally stable polymers (P1 and P2) consisting of TPE conjugated to the 2,7-positions of fluorene and carbazole, respectively, are synthesized and characterized. Both polymers are weakly fluorescent in solutions but show greatly enhanced emission as the aggregate formation, presenting an aggregation-enhanced emission feature. Two kinds of polymer light-emitting diodes are fabricated utilizing P1 and P2 as emitters (EML) (device I: ITO/PEDOT:PSS (45 nm)/PVK:EML (1:1 wt%, 55 nm)/TPBI (38 nm)/Ca:Ag; device II: ITO/PEDOT:PSS (45 nm)/ PVK:OXD-7:EML (3:1:3 wt%, 55 nm)/TPBI (38 nm)/Ca:Ag). The device II of P2 shows the best performances, affording a maximum luminance of 6500 cd/m 2 and a high peak efficiency of 2.11 cd/A.     

Polymorph selectivity of an AIE luminogen under nano-confinement to visualize polymer microstructures

Despite the huge progress of luminescent molecular assemblies over the past decade, it is still challenging to understand their confined behavior in semi-crystalline polymers for constrained space recognition. Here, we report a polymorphic luminogen with aggregation-induced emission (AIE), capable of selective growth in polymer amorphous and crystalline phases with distinct color. The polymorphic behaviors of the AIE luminogen embedded within the polymer network are dependent on the size of nano-confinement: a thermodynamically stable polymorph of the AIE luminogen with green emission is stabilized in the amorphous phase, while a metastable polymorph with yellow emission is confined in the crystalline phase. The information on polymer crystalline and amorphous phases is transformed into distinct fluorescence colors, allowing a single AIE luminogen as a fluorescent marker for visualization of polymer microstructures in terms of amorphous and crystalline phase distribution, quantitative polymer crystallinity measurement, and spatial morphological arrangement. Our findings demonstrate that confinement of the AIE luminogen in the polymer network can achieve free space recognition and also provide a correlation between microscopic morphologies and macroscopic optical signals. We envision that our strategy will inspire the development of other materials with spatial confinement to incorporate AIE luminogens for various applications.

A polymorphic AIEgen is capable of selective growth in amorphous and crystalline polymer phases with distinct color for microstructure visualization.     

Persistent organic room temperature phosphorescence: what is the role of molecular dimers?

Molecular dimers have been frequently found to play an important role in room temperature phosphorescence (RTP), but its inherent working mechanism has remained unclear. Herein a series of unique characteristics, including singlet excimer emission and thermally activated delayed fluorescence, were successfully integrated into a new RTP luminogen of CS-2COOCH₃ to clearly reveal the excited-state process of RTP and the special role of molecular dimers in persistent RTP emission.

The first purely organic room temperature phosphorescence (RTP) luminogen, with singlet excimer emission and thermally activated delayed fluorescence (TADF) effect, was successfully developed.      

Precise and long-term tracking of mitochondria in neurons using a bioconjugatable and photostable AIE luminogen

Tracking mitochondrial movement in neurons is an attractive but challenging research field as dysregulation of mitochondrial motion is associated with multiple neurological diseases. To realize accurate and long-term tracking of mitochondria in neurons, we elaborately designed a novel aggregation-induced emission (AIE)-active luminogen, TPAP-C5-yne, where we selected a cationic pyridinium moiety to target mitochondria and employed an activated alkyne terminus to achieve long-term tracking through bioconjugation with amines on mitochondria. For the first time, we successfully achieved the accurate analysis of the motion of a single mitochondrion in live primary hippocampal neurons and the long-term tracking of mitochondria for up to a week in live neurons. Therefore, this new AIEgen can be used as a potential tool to study the transport of mitochondria in live neurons.

A novel bioconjugatable and photostable AIE luminogen has been rationally synthesized for precise and long-term tracking of neuron mitochondria.     

Tetraphenylethene‐Based Conjugated Fluoranthene: A Potential Fluorescent Probe for Detection of Nitroaromatic Compounds

This study reports the synthesis and photophysical properties of a star‐shaped, novel, fluoranthene–tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation‐induced blue‐shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature‐dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6‐trinitrophenol (PA) with high sensitivity and a high Stern–Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70 % water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5 ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70 % exhibit high Stern–Volmer constants (K_sv=79 998 and 51 120 m ^?1, respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra‐low‐level detection of PA for real‐time field analysis.     

Benzothiazolium-functionalized tetraphenylethene: an AIE luminogen with tunable solid-state emission

Melding a benzothiazolium unit with tetraphenylethene generates a new hemicyanine luminogen with aggregation-induced emission characteristics; the luminogen exhibits crystochromism and its solid-state emission can be repeatedly tuned from yellow or orange to red by grinding-fuming or grinding-heating processes due to the transformation from the crystalline to the amorphous state and vice versa.     

Conformational space of tetrakis(2-naphthalenyl)ethene: a naphthologous AIE luminogen

The AIE luminogen tetrakis(2-naphthalenyl)ethene (2-NA ₄ E) was synthesized by Barton’s double extrusion diazo-thione coupling method from 2,2′-dinaphthyl thioketone and 2,2′-(diazomethylene)bisnaphthylene in 77 % yield. The structure of 2-NA ₄ E was confirmed by its ¹H NMR and ¹³C NMR spectra with full assignments. 2-NA ₄ E and its parent tetraphenylethene (Ph ₄ E) have been subjected to a comprehensive computational DFT study, in search of their conformational spaces. Seven conformers and two transition states of 2-NA ₄ E have been located. Four conformers and one transition state of Ph ₄ E have been located. The conformers of 2-NA ₄ E and Ph ₄ E are not overcrowded, as indicated by the contact distances in the fjord and cove regions. The relative free energies (ΔG ₂₉₈) of the six most stable conformers of 2-NA ₄ E are in the narrow range of 2.3 kJ/mol; they make comparable contributions (12–29 %) to the equilibrium mixture. The energy barriers for the diastereomerization D ₂-Z,Z,Z,Z $ \rightleftharpoons $ ? D ₂-E,E,E,E via the transition state C ₁-Z,E,E,Z and for the enantiomerization C ₂-Z,Z,E,E $ \rightleftharpoons $ ? C ₂-E,E,Z,Z via the transition state C _i -Z,E,Z,E are only 29.8 and 29.0 kJ/mol, respectively, indicating very rapid rates of diastereomerization and enantiomerization at room temperature. The values of naphthalenyl torsion angles and ethenic twist angles in 2-NA ₄ E are almost identical to those in the parent Ph ₄ E. The previously proposed “bulkiness” of the naphthalenyl substituents and the validity of the restriction of naphthalenyl rotation are challenged. The analysis of the AIE effect in 2-NA ₄ E should take into account the intermolecular homochiral and heterochiral interactions between the conformers.     

In Situ Synthesis of AIEgen-based Porous Organic Polymer Films by Interfacial Amino-yne Click Polymerization for Efficient Light-Harvesting

We developed a catalyst-free, atom-economical interfacial amino-yne click polymerization to in situ synthesize new aggregation-induced emission luminogen (AIEgen)-based free-standing porous organic polymer films at room temperature. The crystalline properties of POP films were confirmed by powder X-ray diffraction and high-resolution transmission electron microscopy. The good porosity of these POP films was proved by their N₂ uptake experiments. The thickness of POP films can be easily regulated from 16 nm to ≈1 μm by adjusting monomer concentration. More importantly, these AIEgen-based POP films show bright luminescence with high absolute photoluminescent quantum yields up to 37.8 % and good chemical and thermal stability. The AIEgen-based POP film can encapsulate an organic dye (e.g., Nile red) to further form an artificial light-harvesting system with a large red-shift (Δλ=141 nm), highly efficient energy-transfer ability (Φ_ET=91 %), and high antenna effect (11.3).     

A Mitochondria-targeted AIEgen Labelled with 18F for Breast Cancer Cell Imaging and Therapy

A lack of efficient diagnostic tools for early and noninvasive diagnosis of breast cancer has restricted the clinical treatment effect. This problem might be addressed by the combination of aggregation-induced emission (AIE) fluorescence imaging and positron emission tomography (PET) with the dual advantages of high resolution and easy operation, and unlimited penetration and high sensitivity. Here, a mitochondria-targeted AIE luminogen (AIEgen) radiolabeled with ¹⁸F was developed through a two-step radiochemical reaction by virtue of a prosthetic group. The obtained ^18/19F-Bz-CP imaging probe was examined by in vitro cell uptake and cell proliferation inhibition in two breast cancer cell lines, showing that the probe can efficiently target and locate in the mitochondria through the analysis of fluorescence imaging and PET simultaneously. Additionally, the probe can induce cancer cell apoptosis with the half maximal inhibitory concentration (IC50) of 4.8 μM for MCF-7 cells and 7.2 μM for T47D cells, indicating its potential application for breast cancer therapy.     

A Multiresponsive Functional AIEgen for Spatiotemporal Pattern Control and All-round Information Encryption

Functional materials with multi-responsive properties and good controllability are highly desired for developing bioinspired and intelligent multifunctional systems. Although some chromic molecules have been developed, it is still challenging to realize in situ multicolor fluorescence changes based on a single luminogen. Herein, we reported an aggregation-induced emission (AIE) luminogen called CPVCM, which can undergo a specific amination with primary amines to trigger luminescence change and photoarrangement under UV irradiation at the same active site. Detailed mechanistic insights were carried out to illustrate the reactivity and reaction pathways. Accordingly, multiple-colored images, a quick response code with dynamic colors, and an all-round information encryption system were demonstrated to show the properties of multiple controls and responses. It is believed that this work not only provides a strategy to develop multiresponsive luminogens but also develops an information encryption system based on luminescent materials.     

Stereospecific synthesis of chiral precursors of thienamycin from L-Threonine

L-Threonine was transformed, stereospecifically, to a versatile β-lactam (5a) in 3 steps. This β-lactam was further converted to a key intermediate (25) for the synthesis of thienamycin and its biologically active analogues. Furthermore, the compound 5a was changed to iodides (18 and 23), cyanides (19 and 24), chloromethylketone (26) and aldehydes (30 and 31) which appear to have a latent potential as precursors for the syntheses of the carbapenems.     

Synthesis of some new 4-oxo-thiazolidines,tetrazole and triazole derived from 2-SH-benzothiazole and antimicrobial screening of some synthesized

A new heterocyclic derivative of 2-mercaptobenzothiazole (MBT) comprising 4-oxothiazolidines, tetrazole and triazole, through the reaction of (MBT) with hydrazine hydrate obtained 2-hydrazobenothiazol (1), which was condensed with various aromatic aldehydes. Azomethine derivatives (2a–c) are converted into a number of 4-oxothiazolidines (3a–c) and tetrazole derivatives (4a–c), through the reaction of azomethine derivatives (2a–c) with mercaptoacetic acid and sodium azide, respectively. Also the reaction of compound (1) with triethylorthoformate and nitrous acid to produce the corresponding (triazole and tetrazole) benzothiazole (5,6) was reported.Triazole moieties reported condensation (MBT) with ethylbromo acetate and potassium hydroxide by the fusion method and resulted in ester-2-mercaptobenzothiazole (7), which was treated with hydrazine hydrate to give a hydrazine derivative (8), then converting these compounds (8) to phenyl semicarbazide (9) and phenyl thiosemicarbazide (10) derivatives. Cyclization compounds (9,10) in alkaline media (4 N·NaOH) gave triazoles compounds (11,12). Furthermore the compound (8) was converted to the dithiocarbazate salt (13) which was then cyclized with hydrazine hydrate to give substituted triazole (14). The prepared compounds were identified by spectral methods (FTIR, ¹H NMR, ¹³C NMR) and some of its physical properties were measured and furthermore the effects of the preparing compounds on some strains of bacteria were studied.     

Design and Development of Axially Chiral Bis(naphthofuran) Luminogens as Fluorescent Probes for Cell Imaging

Designing chiral AIEgens without aggregation-induced emission (AIE)-active molecules externally tagged to the chiral scaffold remains a long-standing challenge for the scientific community. The inherent aggregation-caused quenching phenomenon associated with the axially chiral (R)-[1,1′-binaphthalene]-2,2′-diol ((R)-BINOL) scaffold, together with its marginal Stokes shift, limits its application as a chiral AIE-active material. Here, in our effort to design chiral luminogens, we have developed a design strategy in which 2-substituted furans, when appropriately fused with the BINOL scaffold, will generate solid-state emissive materials with high thermal and photostability as well as colour-tunable properties. The excellent biocompatibility, together with the high fluorescence quantum yield and large Stokes shift, of one of the luminogens stimulated us to investigate its cell-imaging potential. The luminogen was observed to be well internalised and uniformly dispersed within the cytoplasm of MDA-MB-231 cancer cells, showing high fluorescence intensity.     

Naturally-occurring acetylenic compounds and derivatives : Regio- and stereocontrolled chloroformylation of 2-(1-propynyl)thiophene and 2-phenyl-5-(1-propynyl)thiophene

2-Phenyl-5-(1-propynyl)thiophene (1), isolated from Coreopsis grandiflora, and 2-(1-propynyl)thiophene (5), an immediate precursor in the synthesis of junipal (2), were synthesized in high yield by a Pd-catalyzed reaction between propyne and 2-iodo-5-phenylthiophene (4) or 2-iodothiophene (6), respectively. Reaction of 5 with the Vilsmeier reagent derived from POCl₃ and N-methylformanilide (MFA) afforded a mixture from which it was possible to isolate (E)-3-chloro-2-methyl-3-(2-thienyl)acrolein (10) in 37.7% yield. The structure and stereochemistry of 10 was unequivocally established by X-ray diffraction of a single crystal of the 2,4-dinitrophenylhydrazone of 10. GLC analysis showed that 10 was contaminated by ca 7% with an isomer to which, on the basis of ¹H-NMR and mass spectra, the structure of (Z)-3-chloro-2-methyl-3-(2-thienyl)acrolein (11) was attributed.Contrary to what was expected from the literature, junipal (2) represented only a minor component in the reaction mixture obtained by the Vilsmeier reaction on 5.Reaction of 1 with POCl₃ and MFA afforded (44.6% yield) a (E)-3-chloro-2-methylacrolein to which the structure 15 was attributed. Compound 15 was also contaminated by ca 10% of an isomer 16, which very probably corresponded to the (Z)-stereoisomer of 15.     

An Unexpected Chromophore–Solvent Reaction Leads to Bicomponent Aggregation-Induced Phosphorescence

Organic luminogens with persistent room-temperature phosphorescence (RTP) have found a wide range of applications. However, many RTP luminogens are prone to severe quenching in the crystalline state. Herein, we report a strategy to construct a donor-sp³-acceptor type luminogen that exhibits aggregation-induced emission (AIE) while the donor-sp²-acceptor counterpart structure exhibits a non-emissive solid state. Unexpectedly, it was discovered that a trace amount (0.01 %) of the structurally similar derivative, produced by a side reaction with the DMF solvent, could induce strong RTP with an absolute RTP yield up to 25.4 % and a lifetime of 48 ms, although the substance does not show RTP by itself. Single-crystal XRD-based calculations suggest that n–σ* orbital interactions as a result of structural similarity may be responsible for the strong RTP in the bicomponent system. This study provides a new insight into the design of multi-component, solid-state RTP materials from organic molecular systems.     

A C2-symmetric analogue of dppf: synthesis and structures of the indenyl-diphosphine complex 1,3-(Ph2PSe)2(C9H6) and the racemic and meso isomers of the heterobimetallic complex Mo(CO)4(1-PPh2-η-C9H6)2Fe

The preparation, isolation and characterisation of 1,3-bis(diphenylphosphino)indene (1) from indene and chlorodiphenylphosphine is described. The reaction of 1 with selenium gives the diselenide adduct 1,3-bis(diphenylselenophosphino)indene (2) which was characterised crystallographically. Deprotonation of 1 and treatment with ferrous chloride gives the unstable tetraphosphine complex bis(1,3-bis(diphenylphosphino)indenyl)iron(II) (3). Complex 3 decomposes to the diphosphine complex bis(1-diphenylphosphinoindenyl)iron(II) (4) via replacement of one diphenylphosphine substituent per indenyl ligand by a hydrogen atom. Complex 4 was also prepared by treatment of two equivalents of 1-diphenylphosphinoindenide with ferrous chloride. The heterobimetallic complex tetracarbonyl(bis(1-diphenylphosphinoindenyl)iron(II))molybdenum(0) (5) was also prepared and crystal structures of both the meso (5a) and C₂-symmetric racemic (5b) isomers are reported.     

Organoselenium chemistry : A study of intermediates in the fragmentation of aliphatic ketoselenoxides. Characterization of selenoxides,selenenamides and selenolseleninates by 1H-,13C-and 77Se-NMR

A series of β-ketoselenenic acids was generated at low temperature ( - 20° to - 50°) by selenoxide syn elimination of appropriate selenoxides (13-ox, 16-ox, 35-ox, 38-ox, and 39-ox). No evidence for the buildup of significant concentrations of selenenic acid was obtained. A selenolseleninate (15, 2,2' - diseleno - bis(1 - phenyl - 2 - methyl -1 - propanone) - Se - oxide) was detected as an intermediate in the decomposition of 13-ox and 16-ox. This compound, which is stable in solution below - 50° was charaeterized by NMR spectroscopy (¹H, ¹³C,⁷⁷Se) and by its thermal decomposition and reactions with phosphite (reduction to diselenide 6) and dialkylamines (formation of selenenamide 11). Decomposition of 15 in the presence of dibenzylamine resulted in trapping of a selenenic acid-like species (RSeSeOH) to give RSeSeN(CH₂Ph)₂ (R = PhC(O)C(CH₃)₂). Although 15 could not be prepared by oxidation of diselenide 6, it was possible to prepare a cyclic selenolseleninate (4,4-dimethyl-1,2-diselenolane monoxide, 20) by oxidation of the related diselenide (19). Attempts to prepare more stable aliphatic selenenic acids by blocking the principal decomposition pathway of 15 were not successful. Thus 1 - benzoyl -1 - cyclopropaneselenenic acid was generated from 35-ox and 38-ox and 1 - benzoyl - 2,2 - dimethylcyclopropaneselenenic from 39-ox. The former underwent normal disproportionation (to 36 and 37) even when prepared at -49°. The latter gave what appeared to be a selenolseleninate (40) which again disproportionated at -17°.