Cu(Ⅱ)-catalyzed aerobic oxidative amidation of azoarenes with amides

A method for Cu(Ⅱ)-catalyzed dehydrogenative amidation of azoarene using air as the terminal oxidant was developed. Various amides, such as arylamides, alkylamides, lactams, and imides, are all effective amidation reagents and provide the desired products in moderate to excellent yields. Notably, good yields can also be obtained on a gram-scale with this amidation reaction.In this protocol of azoarene amidation, the catalyst(Cu(OAc)_2) and oxidant(air) are inexpensive and readily available, and the process is highly efficient and atom economical.     

Solvent-free rhodium(III)-catalyzed synthesis of 2-aminoanilides via C−H amidation of N-nitrosoanilines under ball-milling conditions

A solvent-free rhodium(III)-catalyzed C?H amidation of N-nitrosoanilines with 1,4,2-dioxazol-5-ones has been successfully developed under ball-milling conditions. This protocol provides an efficient and green access to a variety of 2-aminoanilide derivatives with low catalyst loading, remarkable functional group compatibility and excellent yields. In addition, the products allow convenient access to pharmaceutically valuable benzimidazole derivatives through a one-pot two-step synthesis.     

A high yield method for the direct amidation of long-chain fatty acids

The amidation of long-chain fatty acids is the key step for preparing surfactants with excellent interfacial activity. Gas chromatography–mass spectrometry was employed to detect the reactants and products in the direct amidation reactions. The conversion and the concentration of the amides in the reaction process were also investigated to determine the best catalyst, the reaction rate constants, and activation energy. It was identified that the amidation reaction of the long-chain phenyl fatty acid was a zero-order reaction and 3,4,5-trifluorophenylboronic acid was the most effective catalyst by which the activation energy reduced to 55.79 kJ/mol from 95.44 kJ/mol. The method can be applied to other long-chain fatty acids, saturated or unsatureated. The turning-over-temperature was 156°C, over which high yields can be achieved without any catalyst. These provide a reference for the preparation of long-chain fatty acid amides.     

General and efficient copper-catalyzed amidation of saturated C-H bonds using N-halosuccinimides as the oxidants

We have developed a general and efficient method for copper-catalyzed amidation of saturated C-H bonds under mild conditions, and the used substrates include benzylic reagents, the N, N-dimethylaniline derivatives, the free carboxamides, and sulfonamides. The protocol uses inexpensive and readily available CuBr/ N-halosuccinimide (NBS or NCS) as the catalyst/oxidant, so it provides practical applications for synthesis of various amides via C-H activation.     

Catalyst‐Free Three‐Component Tandem CDC Cyclization: Convenient Access to Isoindolinones from Aromatic Acid,Amides, and DMSO by a Pummerer‐Type Rearrangement

A catalyst‐free multicomponent CDC reaction is rarely reported, especially for the intermolecular tandem CDC cyclization, which represents an important strategy for constructing cyclic compounds. Herein, a three‐component tandem CDC cyclization by a Pummerer‐type rearrangement to afford biologically relevant isoindolinones from aromatic acids, amides, and DMSO, is described. This intermolecular tandem reaction undergoes a C(sp²)?H/C(sp³)?H cross‐dehydrogenative coupling, C?N bond formation, and intramolecular amidation. A notable feature of this novel protocol is avoiding a catalyst and additive (apart from oxidant).     

Sequential Cu-catalyzed amidation-base-mediated camps cyclization: a two-step synthesis of 2-Aryl-4-quinolones from o-halophenones

A direct two-step method for the preparation of 2-aryl- and 2-vinyl-4-quinolones that utilizes a copper-catalyzed amidation of o-halophenones followed by a base-promoted Camps cyclization of the resulting N-(2-ketoaryl)amides is described. With CuI, a diamine ligand, and base as the catalyst system, the amidation reactions proceed in good yields for a range of aryl, heteroaryl, and vinyl amides. The subsequent Camps cyclization efficiently provides the desired 4-quinolones with the conditions that are described.     

Water-mediated catalyst preactivation: an efficient protocol for C-N cross-coupling reactions

A protocol for forming a highly active Pd(0) catalyst from Pd(OAc) 2, water, and biaryldialkylphosphine ligands has been developed. This protocol generates a catalyst system, which exhibits excellent reactivity and efficiency in the coupling of a variety of amides and anilines with aryl chlorides.     

CuI catalyzed sulfamidation of arylboronic acid using TsNBr2 at room temperature

An expeditious protocol for amidation arylboronic acid has been developed using TsNBr₂ as the nitrogen source in presence of a CuI as catalyst. Various arylboronic acids could be transformed into corresponding N-arylsulfonamide derivatives within a very short time using CuI as catalyst in presence of DBU at room temperature.     

Iron-catalyzed aerobic oxidative cross-coupling amidation of N,N-dimethylanilines

An efficient iron-catalyzed dehydrogenative cross-coupling amidation/imidation reaction between N,N-dimethylanilines and amides/imides is reported. The protocol uses an inexpensive and readily available Fe(NO₃)₃·9H₂O/O₂ catalytic system in the absence of additional ligands at room temperature.     

Flexible palladium-catalysed amidation reactions for the synthesis of complex aryl amides

This Letter describes the synthesis of complex aryl amides using palladium-catalysed amidation reactions. Use of these conditions allowed for the coupling of a variety of aryl halides and triflates with a host of primary amides in high yields.     

Intermolecular amidation of unactivated sp2 and sp2 C-H bonds via palladium-catalyzed cascade C-H activation/nitrene insertion

This communication describes the Pd(OAc)2-catalyzed intermolecular amidation reactions of unactivated sp2 and sp3 C-H bonds using primary amides and potassium persulfate. The substrates containing a pendent oxime or pyridine group were amidated with excellent chemo- and regioselectivities. It is noteworthy that reactive C-X bonds were well-tolerated and a variety of primary amides can be effective nucleophiles for the Pd-catalyzed C-H amidation reactions. For the reaction of unactivated sp3 C-H bonds, beta-amidation of 1 degrees sp3 C-H bonds versus 2 degrees C-H bonds is preferred. The catalytic reaction is initiated by chelation-assisted cyclopalladation involving C-H bond activation. Preliminary mechanistic study suggested that the persulfate oxidation of primary amides should generate reactive nitrene species, which then reacted with the cyclopalladated complex.     

Ammonium salts from polymer-bound N-hydroxysuccinimide as solid-supported reagents for EDC-mediated amidations

New ammonium and alkylammonium salts derived from a polymeric N-hydroxysuccinimide (P-HOSu) have been prepared and used for the amidation of carboxylic acids and amino acids mediated by 1-ethyl-3-(3′-dimethylamino-propyl)carbodiimide hydrochloride (EDC). These polymer-supported ammonium salts afforded the corresponding amides in good yield, without detectable α-racemization and with easy recovery of the P-HOSu after the amidation reaction, being especially suitable for the amidation of Fmoc-protected amino acids.     

Pd‐Catalyzed C?N Bond Formation with Heteroaromatic Tosylates

A protocol for the palladium(0)‐catalyzed amidation of heteroaromatic tosylates was successfully developed. The methodology proved to be effective for a variety of heteroaryl tosylates including the pyridine, pyrimidine, quinoline and quinoxaline ring systems. Successful carbon? nitrogen bond formation with these heteroaryl tosylates could be performed with a wide range of primary amides, oxazolidinones, lactams, anilines and indoles, including one cyclic urea. Moreover, this C? N bond forming reaction provided products with high structural diversity. The coupling reaction was also amenable to scale up applications.     

Copper(II)-catalyzed amidations of alkynyl bromides as a general synthesis of ynamides and Z-enamides. An intramolecular amidation for the synthesis of macrocyclic ynamides

A general and efficient method for the coupling of a wide range of amides with alkynyl bromides is described here. This novel amidation reaction involves a catalytic protocol using copper(II) sulfate-pentahydrate and 1,10-phenanthroline to direct the sp-C-N bond formation, leading to a structurally diverse array of ynamides including macrocyclic ynamides via an intramolecular amidation. Given the surging interest in ynamide chemistry, this atom economical synthesis of ynamides should invoke further attention from the synthetic organic community.     

Convenient metal-free direct oxidative amidation of aldehyde using dibromoisocyanuric acid under mild conditions

A facile method for the direct synthesis of amides from aldehydes is described. Amide bonds were synthesized by an oxidative amidation in the presence of dibromoisocyanuric acid (DBI). Treatment of aromatic and aliphatic aldehydes with dibromoisocyanuric acid generated acyl bromide intermediates, which were employed to react with a variety of secondary and primary amines to give amides. Through this reaction method, various amides were synthesized directly from aldehydes under mild conditions in high yields and short times. This facile and efficient procedure provides potential strategy for the direct synthesis of amides from aldehydes.     

Peroxide-mediated transition-metal-free direct amidation of alcohols with nitroarenes

An unusual direct amidation of alcohols with nitroarenes mediated by peroxides has been discovered. The reaction tolerated a wide range of functionalities, and various aromatic amides were obtained in moderate to good yields in the absence of transition-metal catalyst. The peroxides and solvents had a significant impact on the reaction yield.     

Pd/C: an efficient, heterogeneous and reusable catalyst for carbon monoxide-free aminocarbonylation of aryl iodides

Carbon monoxide-free aminocarbonylation is carried out efficiently via coupling of N,N-dimethylformamide (DMF) with aryl iodides using Pd/C as a heterogeneous catalyst. The catalyst exhibits remarkable activity and is reusable for up to three consecutive cycles. The reaction is applicable to a wide variety of substituted aryl iodides with different steric and electronic properties providing excellent yields of the corresponding tertiary amides.     

Expedient synthesis of N-acyl anthranilamides and β-enamine amides by the Rh(III)-catalyzed amidation of aryl and vinyl C-H bonds with isocyanates

A Rh(III)-catalyzed protocol for the amidation of anilide and enamide C-H bonds with isocyanates has been developed. This method provides direct and efficient syntheses of N-acyl anthranilamides, enamine amides, and pyrimidin-4-one heterocycles.     

Hydro-amination/-amidation of 1,3-diynes with indoles/azoles/amides under modified Ullmann conditions: stereo- and regio-selective synthesis of N-alkenynes via N-H bond activation

An efficient strategy for the stereo- and regio-selective synthesis of N-alkenynes has been described. The salient feature of the reaction involves hydro-amination/amidation of 1,3-diynes with indoles/azoles/amides via transition-metal catalyzed activation of N-H bond. The resulting N-alkenynes derived from N-heterocycles and cyclic amides were obtained as a mixture of Z/E isomers with Z-stereoselectivity ranging from 60% to 95%. In contrast, acyclic amides afforded N-alkenynes with exclusive E-stereoselectivity, albeit in reduced yield ranging from ∼10% to 41%.     

Isolation and characterization of 2-alkylaminobenzo[b]furans. Evidence for competing O-arylation in Cu-catalyzed intramolecular amidation

2-Alkylaminobenzo[b]furans were isolated and characterized by X-ray crystal structural analysis, for the first time, from the Cu-catalyzed intramolecular amidation of hindered secondary amides under controlled microwave heating. A mechanism was proposed to account for competing Cu-catalyzed intramolecular N- and O-arylation pathways, which were controlled by the bulkiness of substituents on the nitrogen atom of secondary amides.