Grubbs Metathesis Enabled by a Light-Driven gem-Hydrogenation of Internal Alkynes

[(NHC)(cymene)RuCl₂] (NHC=N-heterocyclic carbene) complexes instigate a light-driven gem-hydrogenation of internal alkynes with concomitant formation of discrete Grubbs-type ruthenium carbene species. This unorthodox reactivity mode is harnessed in the form of a “hydrogenative metathesis” reaction, which converts an enyne substrate into a cyclic alkene. The intervention of ruthenium carbenes formed in the actual gem-hydrogenation step was proven by the isolation and crystallographic characterization of a rather unusual representative of this series carrying an unconfined alkyl group on a disubstituted carbene center.     

Tandem cyclopropanation/ring-closing metathesis of dienynes

Certain dienynes give cyclorearrangement by tandem cyclopropanation/ring-closing alkene metathesis, triggered by either a ruthenium carbene or noncarbene ruthenium(II) precatalyst. The process represents a variation of enyne metathesis where presumed cyclopropyl carbene intermediates undergo a consecutive ring-closing metathesis. A mechanistic proposal is offered, and sequential use of catalysts provided a tandem ring-closing enyne/alkene metathesis product.     

Chemodivergent Metathesis of Dienynes Catalyzed by Ruthenium–Indenylidene Complexes: An Experimental and Computational Study

A study on the enyne metathesis reaction leading to the formation cyclic compounds using ruthenium–indenylidene complexes is presented. Several 1,11‐dien‐6‐ynes have been subjected to ruthenium metathesis cyclization by using ruthenium–indenylidene complexes bearing various phosphine and N‐heterocyclic carbene (NHC) ligands. Interestingly, for some substrates chemodivergent metathesis occurs and is a function of the catalyst employed. This led us to investigate the competing “ene‐then‐yne” or “yne‐then‐ene” reaction pathways apparently at play in these systems using both experimental observations and DFT calculations. Experimental and computational studies were found in good agreement and permit to conclude that for phosphine‐containing catalysts, the “ene‐then‐yne” pathway is exclusively adopted. On the other hand, for catalysts bearing NHC ligands, both pathways are possible.     

An ionic liquid-tagged second generation Hoveyda-Grubbs ruthenium carbene complex as highly reactive and recyclable catalyst for ring-closing metathesis of di-, tri- and tetrasubstituted dienes

A second generation Hoveyda-Grubbs ruthenium carbene complex bearing an ionic liquid tag was prepared and shown to be a highly reactive catalyst for the ring-closing metathesis of di-, tri- and tetrasubstituted diene and enyne substrates in minimally ionic solvent systems ([Bmim]PF₆/CH₂Cl₂, 1:9-1:1 v/v). Both the catalyst and the ionic liquid can be conveniently recycled and repeatedly reused (up to 17 cycles) with only a very slight loss of activity. The ionic liquid tag is crucial to the high level of recyclability of the catalyst since the original second generation Grubbs and Hoveyda-Grubbs catalysts rapidly lose their activity when recycled in the ionic liquid layer.     

A new concept for the noncovalent binding of a ruthenium-based olefin metathesis catalyst to polymeric phases: preparation of a catalyst on Raschig rings

A new concept for noncovalent immobilization of a ruthenium olefin metathesis catalyst is presented. The 2-isopropoxybenzylidene ligand of a Hoveyda-Grubbs carbene is further modified by an additional amino group (7) and immobilization is achieved by treatment with sulfonated polystyrene forming the corresponding ammonium salt. In this novel strategy for the immobilization of ruthenium-based metathesis catalysts, the amino group plays a two-fold role, being first an active anchor for immobilization and second, after protonation, activating the catalysts (electron donating to electron withdrawing activity switch). The polymeric support was prepared by precipitation polymerization which led to small bead sizes (0.2-2 microm) and large surface areas. Compared to commercial resins this tailor-made phase showed superior properties in immobilization of complex 7. This concept of immobilization was applied to glass-polymer composite megaporous Raschig rings. Ru catalyst 7 on Raschig rings was used under batch conditions in various metathesis reactions, including ring-closing (RCM), cross- (CM) and enyne metathesis, to give products of high chemical purity with very low ruthenium contamination levels (21-102 ppm). The same ring can be used for up to 6 cycles of metathesis.     

Synthesis and Evaluation of Ruthenium 2‐Alkyl‐6‐mercaptophenolate Catalysts for Olefin Metathesis

A series of ruthenium carbene catalysts containing 2‐sulfidophenolate bidentate ligand with an ortho‐substituent next to the oxygen atom were synthesized. The molecular structure of ruthenium carbene complex containing 2‐isopropyl‐6‐sulfidophenolate ligand was confirmed through single crystal X‐ray diffraction. An oxygen atom can be found in the opposite position of the N‐heterocyclic carbene (NHC) based on the steric hindrance and strong trans‐effects of the NHC ligand. The ruthenium carbene catalyst can catalyze ring‐opening metathesis polymerization (ROMP) reaction of norbornene with high activity and Z‐selectivity and cross metathesis (CM) reactions of terminal alkenes with (Z)‐but‐2‐ene‐1,4‐diol to give Z‐olefin products (Z/E ratios, 70:30–89:11) in low yields (13%–38%). When AlCl₃ was added into the CM reactions, yields (51%–88%) were considerably improved and process becomes highly selective for E‐olefin products (E/Z ratios, 79:21–96:4). Similar to other ruthenium carbene catalysts, these new complexes can tolerate different functional groups.     

Alkyne gem‐Hydrogenation: Formation of Pianostool Ruthenium Carbene Complexes and Analysis of Their Chemical Character

Parahydrogen (p‐H₂) induced polarization (PHIP) NMR spectroscopy showed that [Cp^XRu] complexes with greatly different electronic properties invariably engage propargyl alcohol derivatives into gem‐hydrogenation with formation of pianostool ruthenium carbenes; in so doing, less electron rich Cp^X rings lower the barriers, stabilize the resulting complexes and hence provide opportunities for harnessing genuine carbene reactivity. The chemical character of the resulting ruthenium complexes was studied by DFT‐assisted analysis of the chemical shift tensors determined by solid‐state ¹³C NMR spectroscopy. The combined experimental and computational data draw the portrait of a family of ruthenium carbenes that amalgamate purely electrophilic behavior with characteristics more befitting metathesis‐active Grubbs‐type catalysts.     

Latent ruthenium olefin metathesis catalysts featuring a phosphine or an N-heterocyclic carbene ligand

The synthesis and characterization of latent 18-electron ruthenium benzylidene complexes (PCy₃)((^κN,O)-picolinate)₂RuCHPh (5) and (H₂IMes)((^κN,O)-picolinate)₂RuCHPh (6) are described. Both complexes appear as two isomers. The ratio between the isomers is dependent on l-type ligand. The complexes are inactive in ring-closing metathesis and ring-opening metathesis polymerization reactions even at elevated temperatures in the absence of stimuli. Upon addition of HCl, complexes 5 and 6 become highly active in olefin metathesis reactions. The advantage of the latent catalysts is demonstrated in the ring-opening metathesis polymerization of dicyclopentadiene, where the latency of 6 assures adequate mixing of catalyst and monomer before initiation. Trapping experiments suggests that the acid converts the 18-electron complexes into their corresponding highly olefin metathesis active 14-electron benzylidenes.     

Olefin metathesis featuring ruthenium indenylidene complexes with a sterically demanding NHC ligand

The synthesis and characterization of two new ruthenium indenylidene complexes [RuCl(2)(SIPr)(Py)(Ind)] 6 and [RuCl(2)(SIPr)(3-BrPy)(Ind)] 7 featuring the sterically demanding N-heterocyclic carbene 1,3-bis(2,6-di isopropylphenyl)-4,5-dihydroimidazol-2-ylidene (SIPr) are reported. Remarkable activity was observed with these complexes in ring closing, enyne, and cross metathesis of olefins at low catalyst loadings. The performance of SIPr-bearing complexes 6 and 7 as well as [RuCl(2)(SIPr)(PCy(3))(Ind)] 5 in ring opening metathesis polymerization is also disclosed. This work highlights the enormous influence of the neutral "spectator" ligands on catalyst activity and stability.     

Olefin metathesis polymerization: Some recent developments in the precise polymerizations for synthesis of advanced materials (by ROMP,ADMET)

Recent results for synthesis of end-functionalized polymers (EFP) by using olefin metathesis polymerization have been introduced including basic characteristics in ring-opening metathesis polymerization (ROMP) of cyclic olefins and acyclic diene metathesis (ADMET) polymerization for synthesis of conjugated polymers. Several approaches were demonstrated for synthesis of EFP by living ROMP using molybdenum (exclusive coupling with aldehyde) and ruthenium catalysts (sacrificial ROMP, chain transfer). Cis specific (Z selective) ROMPs were achieved by molybdenum, ruthenium, and vanadium catalysts by the ligand modification. The catalytic synthesis of EFP with high cis selectivity has been achieved by combined ROMP with chain transfer by V(CHSiMe₃)(N-2,6-Cl₂C₆H₃)[OC(CF₃)₃](PMe₃)₂. The ADMET polymerization using molybdenum and ruthenium catalysts afforded defect-free, high molecular weight poly(arylene vinylene)s containing all trans olefinic double bonds. The methods for precise synthesis of EFPs, exhibiting unique optical properties combined with the end groups, were developed. The catalytic one-pot syntheses for EFPs have also been developed.     

Photoinduced ring opening metathesis polymerization (PROMP) of strained bicyclic olefins with ruthenium complexes of the type [(η6-arene1)Ru(η6-arene2)]2+ and [Ru(Nc-R)6]2+

Upon UV irradiation, the complexes [(η⁶-arene₁)Ru(η⁶-arene₂)]²⁺ (toluene-4-sulfonate or trifluormethane-sulfonate as counter ion; examples for arene: benzene, toluene, mesitylene, hexamethylbenzene, anisole, biphenyl, naphthalene) and [Ru(NC-R)₆]²⁺ (tosylate or triflate as counter iron; R = methyl, ethyl, phenyl) are transformed into active catalysts for ring opening metathesis polymerization (ROMP) of strained bicyclic olefins. The photoinduced ring opening metathesis polymerization (PROMP) is most efficient with sandwich complexes having high quantum yields for the photochemically induced solvation of [(η⁶-arene₁)Ru(η⁶-arene₂)]²⁺ to [Ru(solvent)₆]²⁺. With most of the complexes no (or only low) catalytic activity is observed in the absence of light. After the photolysis step, the mechanism of the polymerzation is identical to ROMP reactions with thermally activated ruthenium catalysts. Good yields and high molecular weights are obtained with a catalyst concentration of 0.1–1%. A mechanistic model for the initiation is presented. © 1995 John Wiley & Sons, Inc.     

Ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene ligands: synthesis, structure, and catalytic activity

A series of ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene (NHC) ligands has been prepared and fully characterized. These complexes are readily accessible in one or two steps from commercially available [(PCy(3))(2)Cl(2)Ru==CHPh]. All of the complexes reported herein promote the ring-closing of diethyldiallyl and diethylallylmethallyl malonate, the ring-opening metathesis polymerization of 1,5-cyclooctadiene, and the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, in some cases surpassing in efficiency the existing second-generation catalysts. Especially in the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, all new catalysts demonstrate similar or higher activity than the second-generation ruthenium catalysts and, most importantly, afford improved E/Z ratios of the desired cross-product at conversion above 60 %. The influence of the unsymmetrical NHC ligands on the initiation rate and the activation parameters for the irreversible reaction of these ruthenium complexes with butyl vinyl ether were also studied. Finally, the synthesis of the related chlorodicarbonyl(carbene) rhodium(I) complexes allowed for the study of the electronic properties of the new unsymmetrical NHC ligands that are discussed in detail.     

Oxidation‐Triggered Ring‐Opening Metathesis Polymerization

Eight new N‐Hoveyda‐type complexes were synthesized in yields of 67–92 % through reaction of [RuCl₂(NHC)(Ind)(py)] (NHC=1,3‐bis(2,4,6‐trimethylphenylimidazolin)‐2‐ylidene (SIMes) or 1,3‐bis(2,6‐diisopropylphenylimidazolin)‐2‐ylidene (SIPr), Ind=3‐phenylindenylid‐1‐ene, py=pyridine) with various 1‐ or 1,2‐substituted ferrocene compounds with vinyl and amine or imine substituents. The redox potentials of the respective complexes were determined; in all complexes an iron‐centered oxidation reaction occurs at potentials close to E=+0.5 V. The crystal structures of the reduced and of the respective oxidized Hoveyda‐type complexes were determined and show that the oxidation of the ferrocene unit has little effect on the ruthenium environment. Two of the eight new complexes were found to be switchable catalysts, in that the reduced form is inactive in the ring‐opening metathesis polymerization of cis‐cyclooctene (COE), whereas the oxidized complexes produce polyCOE. The other complexes are not switchable catalysts and are either inactive or active in both reduced and oxidized states.     

Mechanism of enyne metathesis catalyzed by Grubbs ruthenium-carbene complexes: a DFT study

The complete catalytic cycle of the reaction of alkenes and alkynes to dienes by Grubbs ruthenium carbene complexes has been modeled at the B3LYP/LACV3P**+//B3LYP/LACVP level of theory. The core structures of the substrates and the catalyst were used as models, namely, ethene, ethyne, hept-1-en-6-yne, (Me(3)P)(2)Cl(2)Ru=CH(2), and [C(2)H(4)(NMe)(2)C](Me(3)P)Cl(2)Ru=CH(2). Insight into the electronically most preferred mechanistic pathways was gained for both intermolecular as well as for intramolecular enyne metathesis. Alkene metathesis is predicted to proceed fast and reversible, while the insertion of the alkyne substrate is slower, irreversible, and kinetically regioselectivity determining. Ruthenacyclobut-2-ene structures do not exist as local minima in the catalytic cycle. Instead, vinylcarbene complexes are formed directly. The alkyne insertion step and the cycloreversion of 2-vinyl ruthenacyclobutanes feature comparable predicted overall barriers in intermolecular enyne metathesis. For intramolecular enyne metathesis, a noncyclic alkene fragment of the enyne substrate is first incorporated into the Grubbs catalyst by an alkene metathesis reaction. The subsequent insertion of the alkyne fragment then proceeds intramolecularly. Alkene association, cycloaddition, and cycloreversion to the diene product complex close the catalytic cycle. Rate enhancement by an ethene atmosphere (Mori's conditions) originates from a constantly higher overall alkene concentration that is necessary for the rate-limiting [2 + 2] cycloreversion step to the diene product complex.     

The doping effect of fluorinated aromatic solvents on the rate of ruthenium-catalysed olefin metathesis

A study concerning the effect of using a fluorinated aromatic solvent as the medium for olefin metathesis reactions catalysed by ruthenium complexes bearing N-heterocyclic carbene ligands is presented. The use of fluorinated aromatic hydrocarbons (FAH) as solvents for olefin metathesis reactions catalysed by standard commercially available ruthenium pre-catalysts allows substantially higher yields of the desired products to be obtained, especially in the case of demanding polyfunctional molecules, including natural and biologically active compounds. Interactions between the FAH and the second-generation ruthenium catalysts, which apparently improve the efficiency of the olefin metathesis transformation, have been studied by X-ray structure analysis and computations, as well as by carrying out a number of metathesis experiments. The optimisation of reaction conditions by using an FAH can be regarded as a complementary approach for the design of new improved ruthenium catalysts. Fluorinated aromatic solvents are an attractive alternative medium for promoting challenging olefin metathesis reactions.     

New latent metathesis catalysts equipped with exchangeable boronic ester groups on the NHC

Abstract

Latent metathesis catalysts equipped with boronate esters of diols as exchangeable end-groups on their NHC ligands and an S-chelated ruthenium-benzylidene core were synthesized. The stable S-chelated ruthenium complexes underwent hydrolysis under mild acidic conditions, allowing easy exchange of terminal units by several 1,2- and 1,3-diols, without degrading the central ruthenium benzylidene. Using this strategy, we also prepared metathesis catalysts equipped with diallyl substrates at the termini that showed concentration dependency on RCM reactions. Notably, the larger dendritic catalysts were more efficient at the more dilute condition.     

Development of an Enyne Metathesis/Isomerization/Diels–Alder One‐Pot Reaction for the Synthesis of a Novel Near‐Infrared (NIR) Dye Core

N‐Alkyl‐N‐allyl‐2‐alkynylaniline derivatives undergo a tandem ring‐closing enyne metathesis/isomerization/Diels–Alder cycloaddition sequence in the presence of a second‐generation Grubbs catalyst and dienophiles. In practice, the acyclic enyne in the presence of the ruthenium alkylidene first undergoes ring‐closing metathesis to generate cyclic 4‐vinyl‐1,2‐dihydroquinolines; following diene isomerization and then the addition of a dienophile, these ring‐closing metathesis products are selectively converted into a 7‐methyl‐4H‐naphtho[3,2,1‐de]quinoline‐8,11‐dione core. Overall, the reaction sequence converts simple aniline derivatives into π‐conjugated small molecules, which have characteristic absorption in the near‐infrared region, in a single operation through three unique ruthenium‐catalyzed transformations.     

Studies on Electronic Effects in O‐, N‐ and S‐Chelated Ruthenium Olefin‐Metathesis Catalysts

A short overview on the structural design of the Hoveyda–Grubbs‐type ruthenium initiators chelated through oxygen, nitrogen or sulfur atoms is presented. Our aim was to compare and contrast O‐, N‐ and S‐chelated ruthenium complexes to better understand the impact of electron‐withdrawing and ‐donating substituents on the geometry and activity of the ruthenium complexes and to gain further insight into the trans–cis isomerisation process of the S‐chelated complexes. To evaluate the different effects of chelating heteroatoms and to probe electronic effects on sulfur‐ and nitrogen‐chelated latent catalysts, we synthesised a series of novel complexes. These catalysts were compared against two well‐known oxygen‐chelated initiators and a sulfoxide‐chelated complex. The structures of the new complexes have been determined by single‐crystal X‐ray diffraction and analysed to search for correlations between the structural features and activity. The replacement of the oxygen‐chelating atom by a sulfur or nitrogen atom resulted in catalysts that were inert at room temperature for typical ring‐closing metathesis (RCM) and cross‐metathesis reactions and showed catalytic activity only at higher temperatures. Furthermore, one nitrogen‐chelated initiator demonstrated thermo‐switchable behaviour in RCM reactions, similar to its sulfur‐chelated counterparts.     

Trends in Ring-Opening Metathesis Polymerization

Abstract

Several transition metal alkylidene complexes are first discussed as catalysts for the ring-opening metathesis reaction. A new ruthenium catalyst with a slightly enhanced reaction rate is introduced. The stereochemistry and kinetics of the catalysts are investigated with different norbornene derivatives. Then it is shown that MgCl₂ alone is a good heterogeneous catalyst for the ring-opening polymerization (ROMP) of norbornene compounds. This is the first catalyst which does not need activation by a transition metal compound or another organometallic cocatalyst. Applications of the ROMP reaction for the synthesis of polymer specialities covering conjugated liquid crystals and optically active polymers are shown. Poly(cyclopentadienylene vinylene) and sidechain liquid crystal polymers are discussed in more detail. Finally, the synthesis of liquid crystalline elastomers by incorporation of bifunctional monomers during the ROMP reaction is described. It is shown that this kind of polymer can be used for the fabrication of optically anisotropic materials.     

One-pot enyne metathesis/Diels-Alder reaction for the construction of highly functionalized novel polycyclic aza-compounds

Various tricyclic dienes were synthesized via enyne metathesis using the first generation Grubbs catalyst. The enyne metathesis proceeded smoothly in refluxing CH₂Cl₂ with a low catalyst loading (3.0 mol %), giving good yields (72-89%) of the tricyclic products 6 and 16. The resulting 1,3-dienes are suitable precursors of polycyclic structures via a Diels-Alder process. One-pot RCM/Diels-Alder reactions of the enyne products with dienophiles proceeded smoothly to afford polycyclic compounds as a single cycloadduct. The structures of the Diels-Alder adducts were determined by ¹H NMR spectra and X-ray analysis. The cycloadducts were formed via the approach of the dienophiles towards the diene in endo mode.