Designer dendrimers: branched oligosulfonimides with controllable molecular architectures

The synthesis of "designer" dendrimers and dendrons with sulfonimide units at every branching point is reported. The synthesis is based on a series of (regio)selective functionalization reactions of amines and sulfonamides allowing precise control of the dendrimers' shape, the number of branches in each generation, and their peripheral decoration with functional groups. In principle, structurally different branches can be incorporated at any position within the dendrimer structure at will. Structurally perfect symmetrical and two-faced "Janus"-type dendrimers, as well as dendrimers and dendrons with intended interstices were synthesized on a preparative scale and fully characterized. Oligosulfonimide dendrons of various generations bearing an aryl bromide functional group at their focal points were attached to a p-phenylene core with the aid of Suzuki cross-coupling reactions resulting in dendrimers with photoactive terphenyl cores. The structure and the high purity of all dendritic sulfonimides were confirmed by means of (1)H and (13)C NMR, electrospray ionization mass spectrometry (ESI-MS), and elemental analysis. The utility of MALDI-TOF mass spectrometry for the analytical characterization of these dendrimers was evaluated in comparison to electrospray ionization. Two model branched oligosulfonimides were characterized in the solid state by single-crystal X-ray analysis. Reaction selectivities and conformation of sulfonimide branching points were rationalized by DFT calculations.     

A new way for the internal functionalization of dendrimers

The selective reaction of amines and hydrazides with only one Cl on each P(S)Cl₂ or P(O)Cl₂ end group of phosphorus dendrimers, followed by the grafting of hydroxybenzaldehyde on the remaining P-Cl functions, and the subsequent growing of the dendrimer from the aldehyde is described. Allyl and pyrene derivatives have been grafted in this way inside the dendrimers during their growing. This constitutes a new way for the internal functionalization of dendrimers.     

Synthesis of large generation poly(propyl ether imine) (PETIM) dendrimers

Large generation poly(propyl ether imine) (PETIM) dendrimers are synthesized in iterative synthetic cycles of two reductions and two Michael addition reactions. Dendrimers up to sixth generation, containing up to 128 peripheral functionalities, are synthesized. Growth of the PETIM dendrimers, possessing a tertiary amine as the branch juncture and an ether as the linker component, is assessed systematically by routine spectroscopic methods. The peripheries of these dendrimers possess either alcohols, amines, carboxylic acids, esters, or nitriles, thereby opening up possibilities for varied studies involving PETIM dendrimers.     

Chemoselective building blocks for dendrimers from relative reactivity data

Competition reactions for the substitution of monochlorotriazines with different amines provide relative reactivity data that can be used to identify new groups for the chemoselective syntheses of dendrimers based on melamine. Target 1 is prepared using a one-pot per generation strategy without protecting group manipulations or functional group interconversions.     

Hyperbranched polymers versus dendrimers containing a carbosilane framework and terminal ammonium groups as antimicrobial agents

A new family of amine- and ammonium-terminated hyperbranched polycarbosilanes (PCS) and dendrimers has been synthesized. The functionalization of a polycarbosilane matrix was carried out with peripheral allyl groups by two strategies in the case of PCS: 1) hydrosilylation of allyl amines with PCS containing terminal Si-H bonds, or 2) hydrosilylation of PCS-allyl with an aminosilane. Dendrimers with terminal amine groups were synthesized by hydrosilylation of allydimethylamine. Quaternized systems with MeI are soluble and stable in water or other protic solvent. The antibacterial properties of the ammonium-terminated hyperbranched polycarbosilanes and dendrimers have been evaluated showing that they act as potent biocides against Gram-positive and Gram-negative bacterial strains.     

She-She Interactions in a Polymer Matrix. Functionalization of Chloromethylated Crosslinked Poly-Styrene With Alkyl and Aryl Substituted Amines

Chloromethylated crosslinked polystyrene reacted with various alkyl and aryl substituted amines and besides the dispiacement reaction, additio-nai crosstinking took place. In reactions with disubstituted amines, e.g. piperidine or morphoiine, only substitution was observed, while in the case of monosubstituted amines additional crosslinking accompanying the dispiacement reaction depended on the structure of the amine, the degree of functionalization of the polystyrene, and the molar ratio between the Chloromethylated groups and the monosubstituted amines. Higher functionalization of polystyrene favoured a higher degree of additional crosslinking of the polystyrene network.     

One-component gels based on peptidic dendrimers: dendritic effects on materials properties

This paper describes the gelation of symmetric dendrimers based on building blocks constructed from L-lysine. These dendrimers form gel-phase materials in nonpolar organic solvents. The thermal properties and concentration dependence of the gelation were investigated, and it was found that there was a clear dendritic effect on the behavior of the soft materials formed, with higher generation dendrimers giving rise to more thermally stable gels. Variable temperature 1H NMR studies indicated that this behavior was probably a consequence of more extensive interdendrimer hydrogen bonding occurring between the peptidic groups in the higher generation dendrimers. The supramolecular aggregates were found to have a fibrillar structure, with the dimensions and alignment of the fibers being dependent on dendritic generation. Circular dichroism measurements confirmed that these fibers possessed chiral organization of the peptidic groups on the supramolecular (nano) scale, assigned as helicity. This paper indicates that dendritic functionalization provides a useful way of tuning gel-phase materials properties, with clear dendritic effects on gel formation being quantified for the first time, hence illustrating the way dendritic functionalization can play a positive role in the formation of highly functional organic materials with desirable properties.     

Surface, core, and structure modifications of phosphorus-containing dendrimers. Influence on the thermal stability

Three new series of phosphorus-containing dendrimers are described. Their solubility depends on the type of end groups they bear. Perfluoroalkyl chains give dendrimers soluble in chlorofluorocarbons, whereas guanidinium and pyridinium derivatives give water-soluble compounds. The thermal stability of these compounds, as well as of 19 other dendrimers of various generations, having various cores, or various end groups, or branching points is studied. The main feature of this study is that the internal structure of these dendrimers is thermally stable at least up to 376°C. The number of the generation has practically no influence, whereas the principal criterion influencing the thermal stability is the type of end groups. The water-soluble cationic dendrimers are the least stable, but even those are stable up to 225°C. For most of these dendrimers, an important percentage of mass (around 50%) is retained even at a temperature as high as 1000°C. In the best case, up to 70% of the initial mass is retained at 1000°C.     

Ester‐ and amide‐terminated dendrimers with alternating amide and ether generations

Ester‐terminated polyamide dendrimers up to the third generation and amide‐terminated polyamide dendrimers of the first generation were synthesized by convergent growth. The Williamson ether synthesis and diphenylphosphoryl azide (DPPA) coupling of amines to carboxylic acids were used for the construction of the dendrimers, having alternate ether and amide generations. The methyl ester‐ and N,N‐diethylamide‐terminated dendrimers were readily soluble in common organic solvents while the N‐methylamide‐ and N‐benzylamide‐terminated dendrimers were soluble only in DMF and DMSO. Both the end and internal amide groups of the N,N‐diethylamide‐terminated dendrimer were reduced by LiAlH₄ to form a polyamine dendrimer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1533–1543, 2000     

PAMAM树状大分子对酮基布洛芬溶解度的影响

以酮洛芬为模型药物,研究聚酰胺-胺(PAMAM)树状大分子对酮洛芬的增溶作用,并探讨其作用机理.采用紫外光谱法测定了G1.0、G1.5、G2.0、G2.5、G3.0、G3.5PAMAM在不同浓度和不同pH时对酮洛芬的增溶量.并运用计算机模拟方法对PAMAM与酮洛芬相互作用的机理进行了探讨.实验结果表明,酮洛芬的溶解度随溶液pH值变化而变化,在pH4.0～6.0范围内,PAMAM树状大分子对酮洛芬的增溶量随着PAMAM的代数、浓度和溶液pH的增加而增大.整代和半代都具有增溶作用.然而,在同一pH条件下,对于具有相同官能团数目的整代和半代,整代增溶效果要高于半代.计算机模拟结果表明PAMAM与酮洛芬主要靠静电作用力结合.增溶机理可能是酮洛芬的羧基与PAMAM的伯胺和叔胺发生静电作用.     

Synthesis, optical, and electrochemical properties of a new family of dendritic oligothiophenes

A new class of semi-flexible dendrimers with oligothiophene (OT) arms up to the third generation have been synthesized and investigated. The synthetic methods employed include a combination of palladium-catalyzed Stille cross-coupling reactions for oligothiophenes, Sonogashira cross-coupling reactions for building blocks, and carbodiimide-mediated esterification for building up the various dendrimers. The optical and electrochemical properties of this series of oligothiophenes-based dendrimers are shown to be strongly influenced by their morphologies as demonstrated by their pronounced solvatochromic and thermochromic responses under different environmental conditions. Introducing rigid oligothiophene arms to shape non-persistent ester-linked dendrimers causes higher generation dendrimers (G2 and G3) to exhibit solvatochromism and thermochromism, while their oligomeric counterpart (3b) and lower generation (G1) analogue do not. Spectroscopic changes due to both intramolecular and intermolecular aggregations are observed.     

Facile synthesis of dendrimers combining aza‐Michael addition with Thiol‐yne click chemistry

We report a highly efficient approach to prepare dendrimers by taking advantage of the orthogonal characteristic of aza‐Michael addition and thiol‐yne reactions. A fifth generation dendrimer was synthesized within five steps without protection/activation procedures. The reactions proceed under benign conditions without byproducts, and the target products can be easily purified via extraction or precipitation without chromatography. The structure of each generation dendrimer was characterized using NMR spectroscopy, size exclusion chromatography, and mass spectrometry. The obtained dendrimers can have peripheral amine or alkyne groups. We demonstrated that these groups can be used for selective and specific conjugation with various functional groups. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of phosphorus dendrimers bearing chromophoric end groups: toward organic blue light-emitting diodes

Several series of phosphorus dendrimers decorated by potential fluorescent end groups (naphthalene, anthracene, and pyrene) have been synthesized. Unexpectedly, we found that it is absolutely necessary to link the fluorophore to the dendrimer through an alkyl link, and not directly through heteroelements such as oxygen or nitrogen, in order to preserve the fluorescence. One series of dendrimers from generation 1 (6 pyrene end groups) to generation 4 (48 pyrene end groups) has been tested for the elaboration of organic light-emitting diodes (OLEDs). The threshold voltage for the emission of light is high (over 20 V), however, electroluminescence is observed in all cases.     

Electroaddressable Selective Functionalization of Electrode Arrays: Catalytic NADH Detection Using Aryl Diazonium Modified Gold Electrodes

We report the application of 4‐nitrophenyl diazonium modified electrodes towards the electrochemical detection of NADH. Selective activation of individual electrodes on a 5 element array by electro‐addressable conversion of nitro groups to amines and subsequent EDC/NHS crosslinking to the NADH oxidant, pyrroloquinoline quinone (PQQ), is demonstrated. Inactivated electrodes retained nitro functionality and were protected against non‐specific adsorption and mild chemical reactions. Electrodeposition conditions were used to control nitrophenyl film thickness and showed that while increased film thickness leads to greater functionalization density of PQQ, it also results in decreased electron transfer kinetics. The electrodeposition protocol can therefore serve as a method to control electrode functionalization density and film electron transfer kinetics. We believe this simple technique for selective electrode functionalization may facilitate the development of next generation multianalyte electrochemical sensors.     

Dendrimeric phosphines in asymmetric catalysis

Dendrimers are hyperbranched nanosized and precisely defined molecules, attracting increasing attention each year due to their numerous properties in catalysis, materials science, and biology. This tutorial review concerns the use of dendrimers as catalysts and focuses more precisely on their properties as enantioselective catalysts. Emphasis is put on chiral phosphine complexes constituting the core or the end groups of various types of dendrimers. The effect of the location of the catalytic entities, the effect of the size (generation) and the nature of the dendritic skeleton on the enantiomeric excesses are discussed.     

Preparation and characterization of dense films of poly(amidoamine) dendrimers on indium tin oxide

Indium tin oxide (ITO) substrates were modified with a layer of poly(amidoamine) (PAMAM) dendrimers to change their surface properties and, in particular, the substrates' work function. The functionalization procedure involved the electrostatic adsorption of positively charged PAMAM dendrimers of generation five onto negatively polarized ITO surfaces. Three different PAMAM dendrimers were used: PAMAM-NH2 and PAMAM-OH with terminal amine and hydroxyl groups, respectively, as well as Q-PAMAM-NH2, which had been prepared from PAMAM-NH2 by quaternization of the dendrimer's terminal and internal amine groups with methyl iodide. The resulting organic films were analyzed by contact angle goniometry, X-ray photoelectron spectroscopy, ellipsometry, and Kelvin probe force microscopy to confirm the presence of a dense layer. A Langmuir isotherm was derived from surface densities of fluorescence-labeled PAMAM-NH2 dendrimers from which we deduced an equilibrium binding constant, K(eq), of (1.3 +/- 0.3) x 10(5) M(-1). Kelvin probe measurements of the contact potential difference revealed a high reduction of the work function from 4.9 eV for bare ITO to 4.3 eV for ITO with a dense film of PAMAM-NH2 of generation five. PAMAM-OH and Q-PAMAM-NH2 resulted in slightly smaller work function changes. This study illustrates that the work function of ITO can be tuned by adlayers composed of PAMAM dendrimers.     

Conformation and distribution of groups on the surface of amphiphilic polyether-co-polyester dendrimers: effect of molecular architecture

Amphiphilic polyester-co-polyether (PEPE) dendrimers synthesized from poly(ethylene glycol) (PEG) were examined to understand the influence of alterations in the architecture of dendrimers on their conformation at interfaces and distribution of various groups on their surface. Effect of changes in the number of branching points, type of terminal functional groups and generation of dendrimer was primarily evaluated. Dendrimers were deposited on mica by spin coating at 0.1 mg/mL. Tapping mode atomic force microscopy (AFM) was employed for the visualization of dendrimer topographies while, X-ray photoelectron spectroscopy (XPS), AFM phase and force imaging were used as the tools for characterization of their surfaces. Individual dendrimer molecules could be imaged by AFM, which showed that they are round or oval in topography. Dendrimers were also flattened on mica but the extent of flattening differed with the chemical structure; for instance, third generation dendrimers were more flattened than second generation dendrimers whereas, dendrimers with higher number of branches had greater height above the mica surface. Hydrophilic and hydrophobic groups present towards the aerial interface existed in distinct zones rather than being distributed randomly, except in dendrimer with higher number of branches. The percentage of various hydrophobic groups on the surface of dendrimer was enhanced by increase in the number of branches but, was lowered by the presence of hydroxyl groups as the pendant terminal groups. Furthermore, the core of dendrimers was not always located towards the centre, its position was found to be altered by the number of branching points, type of terminal functional groups and the generation of dendrimer.     

Synthesis and properties of dendrimers possessing the same fluorophore(s) located either peripherally or off-center

Two series of phosphorus dendrimers functionalized by maleimide derivatives are synthesized, as well as three new monomeric maleimide derivatives, of which two are characterized by X-ray diffraction. The first series of phosphorus dendrimers possesses maleimide derivatives as end groups (6-48, from generation 0 to generation 3). The second series of dendrimers possesses a single copy of the same maleimide derivative linked "off-center" to a cyclotriphosphazene core, leading to dissymmetrical dendrimers; this series is synthesized from generation 0 to generation 2. The fluorescence properties of both series of dendrimers and of monomers are studied, affording new information. First, the presence of labile hydrogen extinguishes the fluorescence. Second, the grafting of the fluorophore(s) directly to the core affords highly fluorescent compounds. Finally, an original influence of the branches possessing phosphorhydrazone linkages toward the fluorescence properties is shown.     

Comprehensive characterization of surface-functionalized poly(amidoamine) dendrimers with acetamide,hydroxyl, and carboxyl groups

Terminal amine groups of poly(amidoamine) (PAMAM) dendrimers can be substituted with different functional groups for various applications. In this study, PAMAM derivatives with acetamide, hydroxyl, and carboxyl termini were synthesized from ethylenediamine (EDA) core generation 4 and 5 primary amine-terminated PAMAM dendrimers. The reaction products were purified with dialysis and subsequently characterized by polyacrylamide gel electrophoresis (PAGE), capillary electrophoresis (CE), size exclusion chromatography (SEC), matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry, potentiometric titration, ¹H NMR, and ¹³C NMR. PAGE and CE electropherograms provide data regarding the purity, charge distribution, and electrophoretic mobility of the dendrimers and their derivatives. SEC and MALDI-TOF mass spectrometry detect the average absolute molar mass and the individual mass fractions, respectively. The combination of SEC with potentiometric titration provides quantitative evidence of the degree of the functional group substitution, while NMR techniques (both ¹H NMR and ¹³C NMR) confirmed the changes in dendrimer surface functionalization. This study provides a general example for the comprehensive characterization of surface-functionalized PAMAM dendrimer nanoparticles. The synthesized dendrimer derivatives hold promise for environmental and medical applications.     

Low generational polyamidoamine dendrimers to enhance the solubility of folic acid:A‘‘dendritic effect’’investigation

Low generational(G0–G2,G for generation) polyamidoamine(PAMAM) dendrimers were investigated as enhancers to improve the aqueous solubility of folic acid at pH 11 and pH 5.In these two cases,the solubility of folic acid increases with both the dendrimer concentration and generation.However,the solubilization mechanism is different.The electrostatic interaction between the primary amines of dendrimers and the ionized carboxylic groups of folic acid dominates the dissolution process at pH 11 while the increase of the solubility of folic acid at pH 5 is attributed to the hydrophobic encapsulation inside the dendrimer molecules.In addition,for comparison ethylenediamine was used as a small molecule control to examine the ‘‘dendritic effect' in the dendrimer-related solubilization process.Interestingly,PAMAM dendrimers exhibit,at pH 5,a significant superiority over ethylenediamine in enhancing solubility,whereas this ‘‘dendritic effect' cannot be observed under the basic condition.