A novel redox-fluorescence switch based on a triad containing ferrocene and perylene diimide units

By taking advantage of the features of ferrocene as a redox-active electron donor unit and perylene diimide as a fluorescence unit, a new redox fluorescence switch can be constructed on the basis of this triad.     

Synthesis and characterization of a novel electrical and optical-active triads containing fullerene and perylenebisimide units

A new electrical and optical-active triad containing fullerene and perylenebisimide units has been prepared and characterized by UV-vis spectroscopy, fluorescence spectroscopy and voltammetry. For comparison, the triad containing only perylenebisimide units has also been studied. The SEM image indicated that uniform nanofibers of the triad were formed with a diameter of about 50 nm. The thin films of the triad produced steady and prompt photocurrent at irradiation of 20.0 mW cm⁻² white light.     

Highly Soluble Porphyrin (TPP)-Perylene Diimide (PDI) Dyad and Triad:Synthesis and Spectroscopic Studies

Novel porphyrin‐perylene diimide dyad (TPP‐PDI) and porphyrin‐perylene diimide‐porphyrin triad (TPP‐PDI‐TPP) were synthesized and characterized. Their structure and properties were studied by UV, FL, ¹H NMR, MS, elemental analysis, etc. The variation of fluorescence feature and UV spectra of TPP‐PDI‐TPP triad were investigated at different concentration of CF₃COOH in THF. The incorporation of CF₃COOH leads to the closure of the efficient charge transfer decay. After protonation of porphyrin units, the fluorescence intensity of TPP‐PDI‐TPP triad increased greatly. The fluorescence intensity of TPP‐PDI‐TPP triad restored after addition of triethylamine into the solution. Thus, TPP‐PDI‐TPP triad was a proton‐type fluorescence switch based on acid‐base control. Moreover, different from porphyrin‐perylene type molecular switches reported before, this TPP‐PDI‐TPP triad has wonderful solubility in organic solvents.     

锌酞菁-紫精-二茂铁三元化合物分子内光致电子转移及光电转换性能的研究

本文合成了锌酞菁、紫精与二茂铁经共价键相连接的两亲性新的三元化合物,测定了它的吸收光谱、荧光光谱、荧光寿命和瞬态吸收及其衰减,并与二元化合物锌酞菁-紫精进行了比较,结果表明:在DMF和表面活性剂溶液中三元化合物都发生了有效的分子内光致电子转移反应,给出了稳定的电荷转移离子对,其寿命长达100μs以上,表明存在着一个两步电子转移过程,用LB膜技术成功地组装了三元化合物的分子,并检测到明显的光电效应。     

Probing intramolecular Förster resonance energy transfer in a naphthaleneimide-peryleneimide-terrylenediimide-based dendrimer by ensemble and single-molecule fluorescence spectroscopy

We report on the ensemble and single-molecule (SM) dynamics of F?rster resonance energy transfer (FRET) in a multichromophoric rigid polyphenylenic dendrimer (triad) with spectrally different rylene chromophores featuring distinct absorption and emission spectra which cover the whole visible spectral range: a terrylenediimide (TDI) core, four perylenemonoimides (PMIs) attached at the scaffold, and eight naphthalenemonoimides (NMIs) at the rim. For FRET from PMI to TDI taking place with an efficiency of 99.5%, single triad molecules optically excited at 490 nm show fluorescence exclusively from the TDI side in the beginning of their emission. On 360-nm excitation, NMI chromophores transfer their excitation energy either directly or in a stepwise fashion to the core TDI, the latter case involving scaffold-substituted PMIs as intermediate acceptors. Indeed, SM experiments on 360-nm excitation evidence highly efficient FRET from NMI chromophores to the TDI core since individual triad molecules show fluorescence exclusively either from TDI or from an intermediate (oxidized) species but never from PMI. Because PMI and TDI are chromophores with high fluorescence quantum yields and high resistance to photobleaching compared to NMI, 360-nm excitation of a single triad molecule leads to bleaching of NMI chromophores with no chance for PMI to be observed. The spatial positioning and the spectral properties of the chosen rylene chromophores make this multichromophoric system an efficient light collector, able to capture light over the whole visible spectral range and to transfer it finally to the core TDI, the latter releasing it as red fluorescence.     

Molecular AND and INHIBIT gates based on control of porphyrin fluorescence by photochromes

A molecular triad consisting of a porphyrin (P) covalently linked to two photochromes-one from the dihydroindolizine family (DHI) and one from the dihydropyrene family (DHP)-has been synthesized and found to act as either a molecular AND logic gate or an INHIBIT gate, depending on the inputs and initial state of the photochromes. The basis of these functions is quenching of porphyrin fluorescence (output of the gates) by the photochromes. The spiro form of DHI does not quench porphyrin fluorescence, whereas its betaine isomer strongly quenches by photoinduced electron transfer. DHP also quenches porphyrin fluorescence, but its cyclophanediene isomer does not. The triad has been designed using suitable energetics and electronic interactions, so that although these quenching phenomena may be observed, independent isomerization of the attached photochromes still occurs. This makes it possible to switch porphyrin fluorescence on or off by isomerization of the photochromes using various combinations of inputs such as UV light, red light, and heat.     

Interplay of Hole Transfer and Host–Guest Interaction in a Molecular Dyad and Triad: Ensemble and Single‐Molecule Spectroscopy and Sensing Applications

A new molecular dyad consisting of a Cy5 chromophore and ferrocene (Fc) and a triad consisting of Cy5, Fc, and β‐cyclodextrin (CD) are synthesized and their photophysical properties investigated at both the ensemble and single‐molecule levels. Hole transfer efficiency from Cy5 to Fc in the dyad is reduced upon addition of CD. This is due to an increase in the Cy5‐Fc separation (r) when the Fc is encapsulated in the macrocyclic host. On the other hand, the triad adopts either a Fc‐CD inclusion complex conformation in which hole transfer quenching of the Cy5 by Fc is minimal or a quasi‐static conformation with short r and rapid charge transfer. Single‐molecule fluorescence measurements reveal that r is lengthened when the triad molecules are deposited on a glass substrate. By combining intramolecular charge transfer and competitive supramolecular interaction, the triad acts as an efficient chemical sensor to detect different bioactive analytes such as amantadine hydrochloride and sodium lithocholate in aqueous solution and synthetic urine.     

Assembly of a tetrathiafulvalene-anthracene dyad on the surfaces of gold nanoparticles: tuning the excited-state properties of the anthracene unit in the dyad

Due to the unique features of the tetrathiafulvalene (TTF) unit, such as the electron-donating ability and presence of methylthio groups, dyad 1 can be assembled on the surfaces of gold nanoparticles, as indicated by absorption, electrochemical, and fluorescent-spectral studies. Dyad 1 can also be disassembled by the addition of thiols. Assembly of dyad 1 on the surfaces of gold nanoparticles leads to the formation of a triad (A1-D-A2), which in turn modulates the photoinduced electron-transfer process within dyad 1. Accordingly, the fluorescence intensity of dyad 1, after assembly with gold nanoparticles, increases, and the fluorescence lifetime is prolonged. Furthermore, the assembly of dyad 1 on gold nanoparticles facilitates photodimerization of the anthracene units of dyad 1. Both fluorescence and photodimerization are associated with the excited-state behavior of the anthracene unit, thus it may be concluded that the excited-state properties of the anthracene unit can be tuned upon complexation with gold nanoparticles.     

Intra- and intermolecular heavy-atom effects on the fluorescence properties of brominated C60 polyads

A series of brominated mono-methano[60]fullerene malonate derivatives (two diads and one triad) are investigated for intramolecular and external heavy-atom effects on their fluorescence. Significant internal and external heavy-atom effects are observed in the three cases. It is shown that the internal effect doubles when going from the diads to the triad. In bromobenzene and in iodobenzene, the external effect is predominant, and diads and triad behave identically.     

Distance Matters: Effect of the Spacer Length on the Photophysical Properties of Multimodular Perylenediimide–Silicon Phthalocyanine–Fullerene Triads

A multimodular donor–acceptor conjugate featuring silicon phthalocyanine (SiPc) as the electron donor, and two electron acceptors, namely tetrachloroperylenediimide (PDI) and C₆₀, placed at the opposite ends of the SiPc axial positions, was newly designed and synthesized, and the results were compared to the earlier reported PDI-SiPc-C₆₀ triad. Minimal intramolecular interactions between the entities was observed. Absorption, fluorescence, computational and electrochemical studies were performed to evaluate the excitation energy, geometry and electronic structure, and energy levels of different photoevents. Steady-state absorption, fluorescence and excitation spectral studies revealed efficient singlet–singlet energy transfer from ¹PDI* to SiPc in the PDI-SiPc dyad and the PDI-SiPc-C₆₀ triad. The measured rates for these photochemical events were found to be much higher than those reported earlier for the triad, due to closer proximity between the PDI and SiPc entities. The distance also affected the charge separation path in which involvement of PDI, and not C₆₀, in charge separation in the present triad was witnessed. The present investigation brings out the importance of donor–acceptor distances in channeling photochemical events in a multimodular system.     

A photoactive molecular triad as a nanoscale power supply for a supramolecular machine

A tetrathiafulvalene-porphyrin-fullerene (TTF-P-C(60)) molecular triad, which generates electrical current by harnessing light energy when self-assembled onto gold electrodes, has been developed. The triad, composed of three unique electroactive components, namely, 1) an electron-donating TTF unit, 2) a chromophoric porphyrin unit, and 3) an electron-accepting C(60) unit, has been synthesized in a modular fashion. A disulfide-based anchoring group was tagged to the TTF end of the molecule in order to allow its self-assembly on gold surfaces. The surface coverage by the triad in a self-assembled monolayer (SAM) was estimated to be 1.4 nm(2) per molecule, a density which is consistent with hexagonal close-packing of the spherical C(60) component (diameter approximately 1 nm). In a closed electronic circuit, a triad-SAM functionalized working-electrode generates a switchable photocurrent of approximately 1.5 microA cm(-2) when irradiated with a 413 nm Kr-ion laser, a wavelength which is close to the porphyrin chromophore's absorption maximum peak at 420 nm. The electrical energy generated by the triad at the expense of the light energy is ultimately exploited to drive a supramolecular machine in the form of a [2]pseudorotaxane comprised of a pi-electron-deficient tetracationic cyclobis(paraquat-p-phenylene) (CBPQT(4+)) cyclophane and a pi-electron-rich 1,5-bis[(2-hydroxyethoxy) ethoxy]naphthalene (BHEEN) thread. The redox-induced dethreading of the CBPQT(4+) cyclophane from the BHEEN thread can be monitored by measuring the increase in the fluorescence intensity of the BHEEN unit. A gradual increase in the fluorescence intensity of the BHEEN unit concomitant with the photocurrent generation, even at a potential (0 V) much lower than that required (-300 mV) for the direct reduction of the CBPQT(4+) unit, confirms that the dethreading process is driven by the photocurrent generated by the triad-SAM.     

Synthesis of covalently linked linear porphyrin triad and tetrad containing different porphyrin sub-units

Covalently linked diarylethyne bridged unsymmetrical porphyrin triad containing ZnN₄, N₄, and N₂S₂ porphyrin sub-units and porphyrin tetrad containing ZnN₄, N₄, N₃S, and N₂S₂ porphyrin sub-units were synthesized over sequence of Pd(0) mediated coupling reactions. The triad and tetrad are freely soluble in all common organic solvents and characterized by ES-MS, NMR, absorption, fluorescence, and electrochemical techniques. The ¹H NMR, absorption, and electrochemical studies indicated a weak interaction between the porphyrin sub-units of porphyrin triad and porphyrin tetrad. The steady state and time-resolved fluorescence studies supported an energy transfer from one end of porphyrin array to the other end. This kind of porphyrin arrays containing different porphyrin sub-units will be useful for molecular electronics applications.     

Improved Spectral Coverage and Fluorescence Quenching in Donor–acceptor Systems Involving Indolo[3‐2‐b]carbazole and Boron‐dipyrromethene or Diketopyrrolopyrrole

A novel π‐conjugated triad and a polymer incorporating indolo[3,2‐b]‐carbazole (ICZ) and 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) were synthesized via a Sonogashira coupling. Compared to the parent BODIPY the absorption and fluorescence spectrum were for both compounds broader and redshifted. The redshift of the fluorescence and the decrease of the fluorescence quantum yield and decay time upon increasing solvent polarity were attributed to the formation of a partial charge‐transfer state. Upon excitation in the ICZ absorption band the ICZ fluorescence was quenched in both compounds mainly due to energy transfer to the BODIPY moiety. In a similar ICZ–π–DPP polymer (where DPP is diketopyrrolopyrrole), a smaller redshift of the absorption and fluorescence spectra compared to the parent DPP was observed. A less efficient quenching of the ICZ fluorescence in the ICZ–π–DPP polymer could be related to the unfavorable orientation of the transition dipoles of ICZ and DPP. The rate constant for energy transfer was for all compounds an order of magnitude smaller than predicted by Förster theory. While in a solid film of the triad a further redshift of the absorption maximum of nearly 100 nm was observed, no such shift was observed for the ICZ–π–BODIPY polymer.     

Photo-Switchable Aggregation-Induced Emission of Bisthienylethene-Dipyrimido[2,1-b][1,3]benzothiazole Triad

A bisthienylethene-dipyrimido[2,1-b][1,3]benzothiazole (BTE-2PBT) triad has been designed and synthesized based on our recent discovery of PBTs as atypical propeller-shaped novel AIEgens. The triad not only maintains the photochromic properties of BTE moiety in solution, film, and solid state but also exhibits remarkable AIE properties. Moreover, the fluorescence of BTE-2PBT PMMA film could be modulated with high contrast by alternate UV and visible light irradiation. Photoerasing, rewriting, and non-destructive readout of fluorescent images on BTE-2PBT PMMA film well demonstrate its potential application as optical memory media.     

Synthesis and properties of covalently linked BF2–oxasmaragdyrin–porphyrin dyads and triad

Two covalently linked diphenyl ethyne bridged unsymmetrical dyads containing porphyrin and BF₂–oxasmaragdyrin and Zn(II)porphyrin and BF₂–oxasmaragdyrin units and one covalently linked triad containing Zn(II)porphyrin, porphyrin and BF₂–oxasmaragdyrin units were synthesized by coupling appropriate functionalized macrocycles under Pd(0) coupling reaction conditions. The dyads and triad were freely soluble in common organic solvents and confirmed by ES-MS spectra. 1D and 2D NMR techniques were used to characterize the dyads and triad. Absorption and electrochemical studies of dyads and triad showed the overlapping features of the constituted macrocycles indicating that the macrocycles retain their basic features in the dyads and triad. The BF₂–oxasmaragdyrin absorbs at lower energy and emits strongly in the visible region compared to porphyrin/Zn(II)porphyrin. Thus, BF₂–oxasmaragdyrin acts as energy acceptor and porphyrin/Zn(II) porphyrin act as energy donor in dyads and triad. The steady state and time-resolved fluorescence studies supported an efficient energy transfer from porphyrin/Zn(II)porphyrin to BF₂–oxasmaragdyrin unit in dyads and triad.     

Molecular tweezer based on zinc porphyrin-substituted diarylethene

A molecular tweezer, zinc porphyrin-dithienylethene-zinc porphyrin (ZnP-DTE-ZnP) triad, has been prepared. Triad ZnPor-DTE-ZnPor showed a little electronic communication among the chromophores judged from the comparison of the steady-state absorption and fluorescence spectra for triads and their component compounds. Irradiation of ZnPor-DTE-ZnPor with UV light converts dithienylethene moiety from open form to closed form. The complexation of ZnP-DTE-ZnP with 4,4'-bipyridyl were investigated by absorption and fluorescence spectroscopic measurements. ZnP-DTE-ZnP forms a 1:1 complex with 4,4'-bipyridyl. The stability constants of log K=4.0 and 4.2 mol(-1)dm3 were determined by absorption and fluorescence spectral changes, respectively.     

Estimating Reactivity Ratios From Triad Fraction Data

Reactivity ratio estimation is a non-linear estimation problem. Typically, reactivity ratios are estimated using the instantaneous copolymer composition equation, otherwise known as the Mayo-Lewis model, based on low conversion (<5%) copolymer composition data. However, there are other instantaneous models, which can be used to estimate reactivity ratios, such as the instantaneous triad fraction equations. The aim of this paper is to determine the potential improvement in reactivity ratio estimates when triad fraction data is used in place of and in combination with copolymer composition data. The interest in using triad fraction data in parameter estimation, stems from the fact that there are a greater number of responses measured (six triad fractions) compared to composition leading to data with theoretically more information content. In principle this should lead to reactivity ratio estimates having less uncertainty. In this study, the parameter estimates are obtained by employing the error in variables model (EVM), assuming a multiplicative error structure. Several case studies involving published literature data for different copolymer systems are presented. As the case studies demonstrate in general more precise estimates can be obtained from triad fraction data. Combining the triad fraction with composition data leads to little additional improvement. However, discrepancies arise between reactivity ratios estimated from composition data compared with those obtained from triad fraction data depending upon the copolymer system. Those copolymer systems exhibiting more heterogeneity due to phase separation during polymerization may be showing more discrepancy.     

Colloidal particles as elastic triads in nematic liquid crystals

ABSTRACT

In this short review we summarise already published results to manifest very important role of high order elastic terms in the formation of colloidal structures in nematic liquid crystals (NLC). We reveal that every colloidal particle in nematics can be effectively represented as a triad of nonzero elastic moments. Usually colloidal particles in NLCs are treated with their elastic dipole and/or quadrupole moments only. But we demonstrate that octupole, hexadecapole and even 64-pole moments play an important role as well and determine parameters of different 1D, 2D and even 3D colloidal crystals in NLCs. In general the triad of the first three nonzero elastic moments can describe almost all colloidal structures observed so far. Dipole particles should be considered as hard spheroids with a triad of the dipole, quadrupole and octupole moments. Quadrupole particles should be treated as hard spheres with a triad of quadrupole, hexadecapole and 64-pole elastic moments

PACS numbers: 61.30.Dk, 82.70.Dd, 64.70.M?     

An efficient fluorescence sensor for superoxide with an acridinium ion-linked porphyrin triad

Addition of potassium superoxide with 18-crown-6 ether (KO(2)(?-)-18-crown-6) to a toluene solution of an acridinium ion-linked porphyrin triad (Acr(+)-H(2)P-Acr(+)) resulted in a remarkable enhancement of the fluorescence intensity. Thus, Acr(+)-H(2)P-Acr(+) acts as an efficient fluorescence sensor for superoxide. Electron transfer from KO(2)(?-)-18-crown-6 to the Acr(+) moiety to produce the two-electron-reduced species (Acr(?)-H(2)P-Acr(?)) results in inhibition of the fluorescence quenching via photoinduced electron transfer, as revealed by laser flash photolysis measurements.     

Nuclear magnetic resonance studies on microstructure of ethylene copolymers. VI. Carbon-13 spectra of ethylene–vinyl acetate copolymers

The 22.6-MHz Fourier-transform noise-decoupled ¹³C (carbon-13) NMR spectra of several ethylene–vinyl acetate (E–VA) copolymers were obtained. We found that triad information on monomer placement can be deduced from carbonyl resonances, triad and pentad information can be deduced from methine carbon resonances, and triad information is available from the methylene carbon resonances. The random comonomer distributions in E–VA polymerizations were demonstrated up to pentad placements. In addition, the use of model-compound data in the analysis of copolymer spectra was shown.